291 lines
8.9 KiB
C
291 lines
8.9 KiB
C
/* Common functions for protocol examples, to establish Wi-Fi or Ethernet connection.
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
|
|
#include <string.h>
|
|
#include "protocol_examples_common.h"
|
|
#include "sdkconfig.h"
|
|
#include "esp_event.h"
|
|
#include "esp_wifi.h"
|
|
#include "esp_eth.h"
|
|
#include "esp_log.h"
|
|
#include "tcpip_adapter.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/event_groups.h"
|
|
#include "lwip/err.h"
|
|
#include "lwip/sys.h"
|
|
|
|
#define GOT_IPV4_BIT BIT(0)
|
|
#define GOT_IPV6_BIT BIT(1)
|
|
|
|
#ifdef CONFIG_EXAMPLE_CONNECT_IPV6
|
|
#define CONNECTED_BITS (GOT_IPV4_BIT | GOT_IPV6_BIT)
|
|
#else
|
|
#define CONNECTED_BITS (GOT_IPV4_BIT)
|
|
#endif
|
|
|
|
static EventGroupHandle_t s_connect_event_group;
|
|
static ip4_addr_t s_ip_addr;
|
|
static const char* s_connection_name;
|
|
|
|
#ifdef CONFIG_EXAMPLE_CONNECT_IPV6
|
|
static ip6_addr_t s_ipv6_addr;
|
|
#endif
|
|
|
|
|
|
static const char *TAG = "example_connect";
|
|
|
|
/* set up connection, Wi-Fi or Ethernet */
|
|
static void start();
|
|
|
|
/* tear down connection, release resources */
|
|
static void stop();
|
|
|
|
static void on_got_ip(void* arg, esp_event_base_t event_base,
|
|
int32_t event_id, void* event_data)
|
|
{
|
|
ip_event_got_ip_t* event = (ip_event_got_ip_t*) event_data;
|
|
memcpy(&s_ip_addr, &event->ip_info.ip, sizeof(s_ip_addr));
|
|
xEventGroupSetBits(s_connect_event_group, GOT_IPV4_BIT);
|
|
}
|
|
|
|
#ifdef CONFIG_EXAMPLE_CONNECT_IPV6
|
|
|
|
static void on_got_ipv6(void* arg, esp_event_base_t event_base,
|
|
int32_t event_id, void* event_data)
|
|
{
|
|
ip_event_got_ip6_t* event = (ip_event_got_ip6_t*) event_data;
|
|
memcpy(&s_ipv6_addr, &event->ip6_info.ip, sizeof(s_ipv6_addr));
|
|
xEventGroupSetBits(s_connect_event_group, GOT_IPV6_BIT);
|
|
}
|
|
|
|
#endif // CONFIG_EXAMPLE_CONNECT_IPV6
|
|
|
|
esp_err_t example_connect()
|
|
{
|
|
if (s_connect_event_group != NULL) {
|
|
return ESP_ERR_INVALID_STATE;
|
|
}
|
|
s_connect_event_group = xEventGroupCreate();
|
|
start();
|
|
xEventGroupWaitBits(s_connect_event_group, CONNECTED_BITS, true, true, portMAX_DELAY);
|
|
ESP_LOGI(TAG, "Connected to %s", s_connection_name);
|
|
ESP_LOGI(TAG, "IPv4 address: " IPSTR, IP2STR(&s_ip_addr));
|
|
#ifdef CONFIG_EXAMPLE_CONNECT_IPV6
|
|
ESP_LOGI(TAG, "IPv6 address: " IPV6STR, IPV62STR(s_ipv6_addr));
|
|
#endif
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t example_disconnect()
|
|
{
|
|
if (s_connect_event_group == NULL) {
|
|
return ESP_ERR_INVALID_STATE;
|
|
}
|
|
vEventGroupDelete(s_connect_event_group);
|
|
s_connect_event_group = NULL;
|
|
stop();
|
|
ESP_LOGI(TAG, "Disconnected from %s", s_connection_name);
|
|
s_connection_name = NULL;
|
|
return ESP_OK;
|
|
}
|
|
|
|
#ifdef CONFIG_EXAMPLE_CONNECT_WIFI
|
|
|
|
static void on_wifi_disconnect(void* arg, esp_event_base_t event_base,
|
|
int32_t event_id, void* event_data)
|
|
{
|
|
ESP_LOGI(TAG, "Wi-Fi disconnected, trying to reconnect...");
|
|
ESP_ERROR_CHECK( esp_wifi_connect() );
|
|
}
|
|
|
|
#ifdef CONFIG_EXAMPLE_CONNECT_IPV6
|
|
|
|
static void on_wifi_connect(void* arg, esp_event_base_t event_base,
|
|
int32_t event_id, void* event_data)
|
|
{
|
|
tcpip_adapter_create_ip6_linklocal(TCPIP_ADAPTER_IF_STA);
|
|
}
|
|
|
|
#endif // CONFIG_EXAMPLE_CONNECT_IPV6
|
|
|
|
static void start()
|
|
{
|
|
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
|
|
ESP_ERROR_CHECK(esp_wifi_init(&cfg));
|
|
|
|
ESP_ERROR_CHECK(esp_event_handler_register(WIFI_EVENT, WIFI_EVENT_STA_DISCONNECTED, &on_wifi_disconnect, NULL));
|
|
ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, IP_EVENT_STA_GOT_IP, &on_got_ip, NULL));
|
|
#ifdef CONFIG_EXAMPLE_CONNECT_IPV6
|
|
ESP_ERROR_CHECK(esp_event_handler_register(WIFI_EVENT, WIFI_EVENT_STA_CONNECTED, &on_wifi_connect, NULL));
|
|
ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, IP_EVENT_GOT_IP6, &on_got_ipv6, NULL));
|
|
#endif
|
|
|
|
ESP_ERROR_CHECK(esp_wifi_set_storage(WIFI_STORAGE_RAM));
|
|
wifi_config_t wifi_config = {
|
|
.sta = {
|
|
.ssid = CONFIG_EXAMPLE_WIFI_SSID,
|
|
.password = CONFIG_EXAMPLE_WIFI_PASSWORD,
|
|
},
|
|
};
|
|
ESP_LOGI(TAG, "Connecting to %s...", wifi_config.sta.ssid);
|
|
ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA));
|
|
ESP_ERROR_CHECK(esp_wifi_set_config(ESP_IF_WIFI_STA, &wifi_config));
|
|
ESP_ERROR_CHECK(esp_wifi_start());
|
|
ESP_ERROR_CHECK(esp_wifi_connect());
|
|
s_connection_name = CONFIG_EXAMPLE_WIFI_SSID;
|
|
}
|
|
|
|
static void stop()
|
|
{
|
|
ESP_ERROR_CHECK(esp_event_handler_unregister(WIFI_EVENT, WIFI_EVENT_STA_DISCONNECTED, &on_wifi_disconnect));
|
|
ESP_ERROR_CHECK(esp_event_handler_unregister(IP_EVENT, IP_EVENT_STA_GOT_IP, &on_got_ip));
|
|
#ifdef CONFIG_EXAMPLE_CONNECT_IPV6
|
|
ESP_ERROR_CHECK(esp_event_handler_unregister(IP_EVENT, IP_EVENT_GOT_IP6, &on_got_ipv6));
|
|
ESP_ERROR_CHECK(esp_event_handler_unregister(WIFI_EVENT, WIFI_EVENT_STA_CONNECTED, &on_wifi_connect));
|
|
#endif
|
|
ESP_ERROR_CHECK(esp_wifi_stop());
|
|
ESP_ERROR_CHECK(esp_wifi_deinit());
|
|
}
|
|
#endif // CONFIG_EXAMPLE_CONNECT_WIFI
|
|
|
|
|
|
#ifdef CONFIG_EXAMPLE_CONNECT_ETHERNET
|
|
|
|
#include "driver/gpio.h"
|
|
|
|
#ifdef CONFIG_EXAMPLE_PHY_LAN8720
|
|
#include "eth_phy/phy_lan8720.h"
|
|
#define DEFAULT_ETHERNET_PHY_CONFIG phy_lan8720_default_ethernet_config
|
|
#endif
|
|
#ifdef CONFIG_EXAMPLE_PHY_TLK110
|
|
#include "eth_phy/phy_tlk110.h"
|
|
#define DEFAULT_ETHERNET_PHY_CONFIG phy_tlk110_default_ethernet_config
|
|
#elif CONFIG_EXAMPLE_PHY_IP101
|
|
#include "eth_phy/phy_ip101.h"
|
|
#define DEFAULT_ETHERNET_PHY_CONFIG phy_ip101_default_ethernet_config
|
|
#endif
|
|
|
|
#define PIN_PHY_POWER CONFIG_EXAMPLE_PHY_POWER_PIN
|
|
#define PIN_SMI_MDC CONFIG_EXAMPLE_PHY_SMI_MDC_PIN
|
|
#define PIN_SMI_MDIO CONFIG_EXAMPLE_PHY_SMI_MDIO_PIN
|
|
|
|
#ifdef CONFIG_EXAMPLE_PHY_USE_POWER_PIN
|
|
/**
|
|
* @brief re-define power enable func for phy
|
|
*
|
|
* @param enable true to enable, false to disable
|
|
*
|
|
* @note This function replaces the default PHY power on/off function.
|
|
* If this GPIO is not connected on your device (and PHY is always powered),
|
|
* you can use the default PHY-specific power on/off function.
|
|
*/
|
|
static void phy_device_power_enable_via_gpio(bool enable)
|
|
{
|
|
assert(DEFAULT_ETHERNET_PHY_CONFIG.phy_power_enable);
|
|
|
|
if (!enable) {
|
|
DEFAULT_ETHERNET_PHY_CONFIG.phy_power_enable(false);
|
|
}
|
|
|
|
gpio_pad_select_gpio(PIN_PHY_POWER);
|
|
gpio_set_direction(PIN_PHY_POWER, GPIO_MODE_OUTPUT);
|
|
if (enable == true) {
|
|
gpio_set_level(PIN_PHY_POWER, 1);
|
|
ESP_LOGI(TAG, "Power On Ethernet PHY");
|
|
} else {
|
|
gpio_set_level(PIN_PHY_POWER, 0);
|
|
ESP_LOGI(TAG, "Power Off Ethernet PHY");
|
|
}
|
|
|
|
vTaskDelay(1); // Allow the power up/down to take effect, min 300us
|
|
|
|
if (enable) {
|
|
/* call the default PHY-specific power on function */
|
|
DEFAULT_ETHERNET_PHY_CONFIG.phy_power_enable(true);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @brief gpio specific init
|
|
*
|
|
* @note RMII data pins are fixed in esp32:
|
|
* TXD0 <=> GPIO19
|
|
* TXD1 <=> GPIO22
|
|
* TX_EN <=> GPIO21
|
|
* RXD0 <=> GPIO25
|
|
* RXD1 <=> GPIO26
|
|
* CLK <=> GPIO0
|
|
*
|
|
*/
|
|
static void eth_gpio_config_rmii(void)
|
|
{
|
|
phy_rmii_configure_data_interface_pins();
|
|
phy_rmii_smi_configure_pins(PIN_SMI_MDC, PIN_SMI_MDIO);
|
|
}
|
|
|
|
#ifdef CONFIG_EXAMPLE_CONNECT_IPV6
|
|
|
|
/** Event handler for Ethernet events */
|
|
static void on_eth_event(void* arg, esp_event_base_t event_base,
|
|
int32_t event_id, void* event_data)
|
|
{
|
|
switch (event_id) {
|
|
case ETHERNET_EVENT_CONNECTED:
|
|
ESP_LOGI(TAG, "Ethernet Link Up");
|
|
tcpip_adapter_create_ip6_linklocal(TCPIP_ADAPTER_IF_ETH);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
#endif // CONFIG_EXAMPLE_CONNECT_IPV6
|
|
|
|
static void start()
|
|
{
|
|
eth_config_t config = DEFAULT_ETHERNET_PHY_CONFIG;
|
|
config.phy_addr = CONFIG_EXAMPLE_PHY_ADDRESS;
|
|
config.gpio_config = eth_gpio_config_rmii;
|
|
config.tcpip_input = tcpip_adapter_eth_input;
|
|
config.clock_mode = CONFIG_EXAMPLE_PHY_CLOCK_MODE;
|
|
|
|
#ifdef CONFIG_EXAMPLE_PHY_USE_POWER_PIN
|
|
/* Replace the default 'power enable' function with an example-specific one
|
|
that toggles a power GPIO. */
|
|
config.phy_power_enable = phy_device_power_enable_via_gpio;
|
|
#endif
|
|
|
|
ESP_ERROR_CHECK(esp_eth_init(&config));
|
|
|
|
ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, IP_EVENT_ETH_GOT_IP, &on_got_ip, NULL));
|
|
#ifdef CONFIG_EXAMPLE_CONNECT_IPV6
|
|
ESP_ERROR_CHECK(esp_event_handler_register(ETH_EVENT, ETHERNET_EVENT_CONNECTED, &on_eth_event, NULL));
|
|
ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, IP_EVENT_GOT_IP6, &on_got_ipv6, NULL));
|
|
#endif
|
|
|
|
ESP_ERROR_CHECK(esp_eth_enable());
|
|
|
|
s_connection_name = "Ethernet";
|
|
}
|
|
|
|
static void stop()
|
|
{
|
|
ESP_ERROR_CHECK(esp_event_handler_unregister(IP_EVENT, IP_EVENT_ETH_GOT_IP, &on_got_ip));
|
|
#ifdef CONFIG_EXAMPLE_CONNECT_IPV6
|
|
ESP_ERROR_CHECK(esp_event_handler_unregister(IP_EVENT, IP_EVENT_GOT_IP6, &on_got_ipv6));
|
|
ESP_ERROR_CHECK(esp_event_handler_unregister(ETH_EVENT, ETHERNET_EVENT_CONNECTED, &on_eth_event));
|
|
#endif
|
|
|
|
ESP_ERROR_CHECK(esp_eth_disable());
|
|
ESP_ERROR_CHECK(esp_eth_deinit());
|
|
}
|
|
|
|
#endif // CONFIG_EXAMPLE_CONNECT_ETHERNET
|