OVMS3-idf/examples/bluetooth/esp_ble_mesh/components/button/button.c

434 lines
14 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdio.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "freertos/timers.h"
#include "esp_log.h"
#include "driver/gpio.h"
#include "iot_button.h"
#include "esp_timer.h"
#define USE_ESP_TIMER CONFIG_BUTTON_USE_ESP_TIMER
#if USE_ESP_TIMER
#define STOP_TIMER(tmr) esp_timer_stop(tmr)
#define DELETE_TIMER(tmr) esp_timer_delete(tmr)
#else
#define STOP_TIMER(tmr) xTimerStop(tmr, portMAX_DELAY)
#define DELETE_TIMER(tmr) xTimerDelete(tmr, portMAX_DELAY);
#endif
#define IOT_CHECK(tag, a, ret) if(!(a)) { \
ESP_LOGE(tag,"%s:%d (%s)", __FILE__, __LINE__, __FUNCTION__); \
return (ret); \
}
#define ERR_ASSERT(tag, param) IOT_CHECK(tag, (param) == ESP_OK, ESP_FAIL)
#define POINT_ASSERT(tag, param, ret) IOT_CHECK(tag, (param) != NULL, (ret))
typedef enum {
BUTTON_STATE_IDLE = 0,
BUTTON_STATE_PUSH,
BUTTON_STATE_PRESSED,
} button_status_t;
typedef struct button_dev button_dev_t;
typedef struct btn_cb button_cb_t;
struct btn_cb{
TickType_t interval;
button_cb cb;
void* arg;
#if !USE_ESP_TIMER
TimerHandle_t tmr;
#else
esp_timer_handle_t tmr;
#endif
button_dev_t *pbtn;
button_cb_t *next_cb;
};
struct button_dev{
uint8_t io_num;
uint8_t active_level;
uint32_t serial_thres_sec;
button_status_t state;
button_cb_t tap_short_cb;
button_cb_t tap_psh_cb;
button_cb_t tap_rls_cb;
button_cb_t press_serial_cb;
button_cb_t* cb_head;
};
#define BUTTON_GLITCH_FILTER_TIME_MS CONFIG_BUTTON_IO_GLITCH_FILTER_TIME_MS
static const char* TAG = "button";
// static void button_press_cb(xTimerHandle tmr)
static void button_press_cb(void* tmr)
{
#if !USE_ESP_TIMER
button_cb_t* btn_cb = (button_cb_t*) pvTimerGetTimerID(tmr);
#else
button_cb_t* btn_cb = (button_cb_t*)(tmr);
#endif
button_dev_t* btn = btn_cb->pbtn;
// low, then restart
if (btn->active_level == gpio_get_level(btn->io_num)) {
btn->state = BUTTON_STATE_PRESSED;
if (btn_cb->cb) {
btn_cb->cb(btn_cb->arg);
}
}
}
// static void button_tap_psh_cb(xTimerHandle tmr)
static void button_tap_psh_cb(void* tmr)
{
#if !USE_ESP_TIMER
button_cb_t* btn_cb = (button_cb_t*) pvTimerGetTimerID(tmr);
#else
button_cb_t* btn_cb = (button_cb_t*)(tmr);
#endif
button_dev_t* btn = btn_cb->pbtn;
STOP_TIMER(btn->tap_rls_cb.tmr);
int lv = gpio_get_level(btn->io_num);
if (btn->active_level == lv) {
// high, then key is up
btn->state = BUTTON_STATE_PUSH;
if (btn->press_serial_cb.tmr) {
#if !USE_ESP_TIMER
xTimerChangePeriod(btn->press_serial_cb.tmr, btn->serial_thres_sec*1000 / portTICK_PERIOD_MS, portMAX_DELAY);
xTimerReset(btn->press_serial_cb.tmr, portMAX_DELAY);
#else
esp_timer_stop(btn->press_serial_cb.tmr);
esp_timer_start_once(btn->press_serial_cb.tmr, btn->serial_thres_sec * 1000 * 1000);
#endif
}
if (btn->tap_psh_cb.cb) {
btn->tap_psh_cb.cb(btn->tap_psh_cb.arg);
}
} else {
// 50ms, check if this is a real key up
if (btn->tap_rls_cb.tmr) {
STOP_TIMER(btn->tap_rls_cb.tmr);
#if !USE_ESP_TIMER
xTimerReset(btn->tap_rls_cb.tmr, portMAX_DELAY);
#else
esp_timer_start_once(btn->tap_rls_cb.tmr, btn->tap_rls_cb.interval * portTICK_PERIOD_MS * 1000);
#endif
}
}
}
static void button_tap_rls_cb(void* tmr)
{
#if !USE_ESP_TIMER
button_cb_t* btn_cb = (button_cb_t*) pvTimerGetTimerID(tmr);
#else
button_cb_t* btn_cb = (button_cb_t*)(tmr);
#endif
button_dev_t* btn = btn_cb->pbtn;
STOP_TIMER(btn->tap_rls_cb.tmr);
if (btn->active_level == gpio_get_level(btn->io_num)) {
} else {
// high, then key is up
button_cb_t *pcb = btn->cb_head;
while (pcb != NULL) {
if (pcb->tmr != NULL) {
STOP_TIMER(pcb->tmr);
}
pcb = pcb->next_cb;
}
if (btn->press_serial_cb.tmr && btn->press_serial_cb.tmr != NULL) {
STOP_TIMER(btn->press_serial_cb.tmr);
}
if (btn->tap_short_cb.cb && btn->state == BUTTON_STATE_PUSH) {
btn->tap_short_cb.cb(btn->tap_short_cb.arg);
}
if(btn->tap_rls_cb.cb && btn->state != BUTTON_STATE_IDLE) {
btn->tap_rls_cb.cb(btn->tap_rls_cb.arg);
}
btn->state = BUTTON_STATE_IDLE;
}
}
static void button_press_serial_cb(void* tmr)
{
#if !USE_ESP_TIMER
button_dev_t* btn = (button_dev_t*) pvTimerGetTimerID(tmr);
#else
button_dev_t* btn = (button_dev_t*)(tmr);
#endif
if (btn->press_serial_cb.cb) {
btn->press_serial_cb.cb(btn->press_serial_cb.arg);
}
#if !USE_ESP_TIMER
xTimerChangePeriod(btn->press_serial_cb.tmr, btn->press_serial_cb.interval, portMAX_DELAY);
xTimerReset(btn->press_serial_cb.tmr, portMAX_DELAY);
#else
esp_timer_stop(btn->press_serial_cb.tmr);
esp_timer_start_once(btn->press_serial_cb.tmr, btn->press_serial_cb.interval * portTICK_PERIOD_MS * 1000);
#endif
}
static void button_gpio_isr_handler(void* arg)
{
button_dev_t* btn = (button_dev_t*) arg;
portBASE_TYPE HPTaskAwoken = pdFALSE;
int level = gpio_get_level(btn->io_num);
if (level == btn->active_level) {
if (btn->tap_psh_cb.tmr) {
#if !USE_ESP_TIMER
xTimerStopFromISR(btn->tap_psh_cb.tmr, &HPTaskAwoken);
xTimerResetFromISR(btn->tap_psh_cb.tmr, &HPTaskAwoken);
#else
esp_timer_stop(btn->tap_psh_cb.tmr);
esp_timer_start_once(btn->tap_psh_cb.tmr, btn->tap_psh_cb.interval * portTICK_PERIOD_MS * 1000);
#endif
}
button_cb_t *pcb = btn->cb_head;
while (pcb != NULL) {
if (pcb->tmr != NULL) {
#if !USE_ESP_TIMER
xTimerStopFromISR(pcb->tmr, &HPTaskAwoken);
xTimerResetFromISR(pcb->tmr, &HPTaskAwoken);
#else
esp_timer_stop(pcb->tmr);
esp_timer_start_once(pcb->tmr, pcb->interval * portTICK_PERIOD_MS * 1000);
#endif
}
pcb = pcb->next_cb;
}
} else {
// 50ms, check if this is a real key up
if (btn->tap_rls_cb.tmr) {
#if !USE_ESP_TIMER
xTimerStopFromISR(btn->tap_rls_cb.tmr, &HPTaskAwoken);
xTimerResetFromISR(btn->tap_rls_cb.tmr, &HPTaskAwoken);
#else
esp_timer_stop(btn->tap_rls_cb.tmr);
esp_timer_start_once(btn->tap_rls_cb.tmr, btn->tap_rls_cb.interval * portTICK_PERIOD_MS * 1000);
#endif
}
}
if(HPTaskAwoken == pdTRUE) {
portYIELD_FROM_ISR();
}
}
#if !USE_ESP_TIMER
static void button_free_tmr(xTimerHandle* tmr)
#else
static void button_free_tmr(esp_timer_handle_t *tmr)
#endif
{
if (tmr && *tmr) {
STOP_TIMER(*tmr);
DELETE_TIMER(*tmr);
*tmr = NULL;
}
}
esp_err_t iot_button_delete(button_handle_t btn_handle)
{
POINT_ASSERT(TAG, btn_handle, ESP_ERR_INVALID_ARG);
button_dev_t* btn = (button_dev_t*) btn_handle;
gpio_set_intr_type(btn->io_num, GPIO_INTR_DISABLE);
gpio_isr_handler_remove(btn->io_num);
button_free_tmr(&btn->tap_rls_cb.tmr);
button_free_tmr(&btn->tap_psh_cb.tmr);
button_free_tmr(&btn->tap_short_cb.tmr);
button_free_tmr(&btn->press_serial_cb.tmr);
button_cb_t *pcb = btn->cb_head;
while (pcb != NULL) {
button_cb_t *cb_next = pcb->next_cb;
button_free_tmr(&pcb->tmr);
free(pcb);
pcb = cb_next;
}
free(btn);
return ESP_OK;
}
button_handle_t iot_button_create(gpio_num_t gpio_num, button_active_t active_level)
{
#if USE_ESP_TIMER
ets_printf("use esp timer !!!\n");
esp_timer_init();
#endif
IOT_CHECK(TAG, gpio_num < GPIO_NUM_MAX, NULL);
button_dev_t* btn = (button_dev_t*) calloc(1, sizeof(button_dev_t));
POINT_ASSERT(TAG, btn, NULL);
btn->active_level = active_level;
btn->io_num = gpio_num;
btn->state = BUTTON_STATE_IDLE;
btn->tap_rls_cb.arg = NULL;
btn->tap_rls_cb.cb = NULL;
btn->tap_rls_cb.interval = BUTTON_GLITCH_FILTER_TIME_MS / portTICK_PERIOD_MS;
btn->tap_rls_cb.pbtn = btn;
#if !USE_ESP_TIMER
btn->tap_rls_cb.tmr = xTimerCreate("btn_rls_tmr", btn->tap_rls_cb.interval, pdFALSE,
&btn->tap_rls_cb, button_tap_rls_cb);
#else
esp_timer_create_args_t tmr_param_rls;
tmr_param_rls.arg = &btn->tap_rls_cb;
tmr_param_rls.callback = button_tap_rls_cb;
tmr_param_rls.dispatch_method = ESP_TIMER_TASK;
tmr_param_rls.name = "btn_rls_tmr";
esp_timer_create(&tmr_param_rls, &btn->tap_rls_cb.tmr);
#endif
btn->tap_psh_cb.arg = NULL;
btn->tap_psh_cb.cb = NULL;
btn->tap_psh_cb.interval = BUTTON_GLITCH_FILTER_TIME_MS / portTICK_PERIOD_MS;
btn->tap_psh_cb.pbtn = btn;
#if !USE_ESP_TIMER
btn->tap_psh_cb.tmr = xTimerCreate("btn_psh_tmr", btn->tap_psh_cb.interval, pdFALSE,
&btn->tap_psh_cb, button_tap_psh_cb);
#else
esp_timer_create_args_t tmr_param_psh;
tmr_param_psh.arg = &btn->tap_psh_cb;
tmr_param_psh.callback = button_tap_psh_cb;
tmr_param_psh.dispatch_method = ESP_TIMER_TASK;
tmr_param_psh.name = "btn_psh_tmr";
esp_timer_create(&tmr_param_psh, &btn->tap_psh_cb.tmr);
#endif
gpio_install_isr_service(0);
gpio_config_t gpio_conf;
gpio_conf.intr_type = GPIO_INTR_ANYEDGE;
gpio_conf.mode = GPIO_MODE_INPUT;
gpio_conf.pin_bit_mask = (1ULL << gpio_num);
gpio_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
gpio_conf.pull_up_en = GPIO_PULLUP_ENABLE;
gpio_config(&gpio_conf);
gpio_isr_handler_add(gpio_num, button_gpio_isr_handler, btn);
return (button_handle_t) btn;
}
esp_err_t iot_button_rm_cb(button_handle_t btn_handle, button_cb_type_t type)
{
button_dev_t* btn = (button_dev_t*) btn_handle;
button_cb_t* btn_cb = NULL;
if (type == BUTTON_CB_PUSH) {
btn_cb = &btn->tap_psh_cb;
} else if (type == BUTTON_CB_RELEASE) {
btn_cb = &btn->tap_rls_cb;
} else if (type == BUTTON_CB_TAP) {
btn_cb = &btn->tap_short_cb;
} else if (type == BUTTON_CB_SERIAL) {
btn_cb = &btn->press_serial_cb;
}
btn_cb->cb = NULL;
btn_cb->arg = NULL;
btn_cb->pbtn = btn;
button_free_tmr(&btn_cb->tmr);
return ESP_OK;
}
esp_err_t iot_button_set_serial_cb(button_handle_t btn_handle, uint32_t start_after_sec, TickType_t interval_tick, button_cb cb, void* arg)
{
button_dev_t* btn = (button_dev_t*) btn_handle;
btn->serial_thres_sec = start_after_sec;
if (btn->press_serial_cb.tmr == NULL) {
#if !USE_ESP_TIMER
btn->press_serial_cb.tmr = xTimerCreate("btn_serial_tmr", btn->serial_thres_sec*1000 / portTICK_PERIOD_MS,
pdFALSE, btn, button_press_serial_cb);
#else
esp_timer_create_args_t tmr_param_ser;
tmr_param_ser.arg = btn;
tmr_param_ser.callback = button_press_serial_cb;
tmr_param_ser.dispatch_method = ESP_TIMER_TASK;
tmr_param_ser.name = "btn_serial_tmr";
esp_timer_create(&tmr_param_ser, &btn->press_serial_cb.tmr);
#endif
}
btn->press_serial_cb.arg = arg;
btn->press_serial_cb.cb = cb;
btn->press_serial_cb.interval = interval_tick;
btn->press_serial_cb.pbtn = btn;
#if !USE_ESP_TIMER
xTimerChangePeriod(btn->press_serial_cb.tmr, btn->serial_thres_sec*1000 / portTICK_PERIOD_MS, portMAX_DELAY);
#endif
return ESP_OK;
}
esp_err_t iot_button_set_evt_cb(button_handle_t btn_handle, button_cb_type_t type, button_cb cb, void* arg)
{
POINT_ASSERT(TAG, btn_handle, ESP_ERR_INVALID_ARG);
button_dev_t* btn = (button_dev_t*) btn_handle;
if (type == BUTTON_CB_PUSH) {
btn->tap_psh_cb.arg = arg;
btn->tap_psh_cb.cb = cb;
btn->tap_psh_cb.interval = BUTTON_GLITCH_FILTER_TIME_MS / portTICK_RATE_MS;
btn->tap_psh_cb.pbtn = btn;
#if !USE_ESP_TIMER
xTimerChangePeriod(btn->tap_psh_cb.tmr, btn->tap_psh_cb.interval, portMAX_DELAY);
#endif
} else if (type == BUTTON_CB_RELEASE) {
btn->tap_rls_cb.arg = arg;
btn->tap_rls_cb.cb = cb;
btn->tap_rls_cb.interval = BUTTON_GLITCH_FILTER_TIME_MS / portTICK_RATE_MS;
btn->tap_rls_cb.pbtn = btn;
#if !USE_ESP_TIMER
xTimerChangePeriod(btn->tap_rls_cb.tmr, btn->tap_psh_cb.interval, portMAX_DELAY);
#endif
} else if (type == BUTTON_CB_TAP) {
btn->tap_short_cb.arg = arg;
btn->tap_short_cb.cb = cb;
btn->tap_short_cb.interval = BUTTON_GLITCH_FILTER_TIME_MS / portTICK_RATE_MS;
btn->tap_short_cb.pbtn = btn;
} else if (type == BUTTON_CB_SERIAL) {
iot_button_set_serial_cb(btn_handle, 1, 1000 / portTICK_RATE_MS, cb, arg);
}
return ESP_OK;
}
esp_err_t iot_button_add_custom_cb(button_handle_t btn_handle, uint32_t press_sec, button_cb cb, void* arg)
{
POINT_ASSERT(TAG, btn_handle, ESP_ERR_INVALID_ARG);
IOT_CHECK(TAG, press_sec != 0, ESP_ERR_INVALID_ARG);
button_dev_t* btn = (button_dev_t*) btn_handle;
button_cb_t* cb_new = (button_cb_t*) calloc(1, sizeof(button_cb_t));
POINT_ASSERT(TAG, cb_new, ESP_FAIL);
cb_new->arg = arg;
cb_new->cb = cb;
cb_new->interval = press_sec * 1000 / portTICK_PERIOD_MS;
cb_new->pbtn = btn;
#if !USE_ESP_TIMER
cb_new->tmr = xTimerCreate("btn_press_tmr", cb_new->interval, pdFALSE, cb_new, button_press_cb);
#else
esp_timer_create_args_t tmr_param_cus;
tmr_param_cus.arg = cb_new;
tmr_param_cus.callback = button_press_cb;
tmr_param_cus.dispatch_method = ESP_TIMER_TASK;
tmr_param_cus.name = "btn_press_custom_tmr";
esp_timer_create(&tmr_param_cus, &cb_new->tmr);
#endif
cb_new->next_cb = btn->cb_head;
btn->cb_head = cb_new;
return ESP_OK;
}