5ddf6daa98
1. The transmitting mode of the packets from LWIP to MAC is changed from synchronous to asynchronous. 2. The receive buf mode : support pointer mode and copy mode. 3. Add get phy status func used to config mac register.
1357 lines
44 KiB
C
Executable file
1357 lines
44 KiB
C
Executable file
/**
|
|
* @file
|
|
* Packet buffer management
|
|
*
|
|
* Packets are built from the pbuf data structure. It supports dynamic
|
|
* memory allocation for packet contents or can reference externally
|
|
* managed packet contents both in RAM and ROM. Quick allocation for
|
|
* incoming packets is provided through pools with fixed sized pbufs.
|
|
*
|
|
* A packet may span over multiple pbufs, chained as a singly linked
|
|
* list. This is called a "pbuf chain".
|
|
*
|
|
* Multiple packets may be queued, also using this singly linked list.
|
|
* This is called a "packet queue".
|
|
*
|
|
* So, a packet queue consists of one or more pbuf chains, each of
|
|
* which consist of one or more pbufs. CURRENTLY, PACKET QUEUES ARE
|
|
* NOT SUPPORTED!!! Use helper structs to queue multiple packets.
|
|
*
|
|
* The differences between a pbuf chain and a packet queue are very
|
|
* precise but subtle.
|
|
*
|
|
* The last pbuf of a packet has a ->tot_len field that equals the
|
|
* ->len field. It can be found by traversing the list. If the last
|
|
* pbuf of a packet has a ->next field other than NULL, more packets
|
|
* are on the queue.
|
|
*
|
|
* Therefore, looping through a pbuf of a single packet, has an
|
|
* loop end condition (tot_len == p->len), NOT (next == NULL).
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 2001-2004 Swedish Institute of Computer Science.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
|
|
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
|
|
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
* OF SUCH DAMAGE.
|
|
*
|
|
* This file is part of the lwIP TCP/IP stack.
|
|
*
|
|
* Author: Adam Dunkels <adam@sics.se>
|
|
*
|
|
*/
|
|
|
|
#include "lwip/opt.h"
|
|
|
|
#include "lwip/stats.h"
|
|
#include "lwip/def.h"
|
|
#include "lwip/mem.h"
|
|
#include "lwip/memp.h"
|
|
#include "lwip/pbuf.h"
|
|
#include "lwip/sys.h"
|
|
#if LWIP_TCP && TCP_QUEUE_OOSEQ
|
|
#include "lwip/priv/tcp_priv.h"
|
|
#endif
|
|
#if LWIP_CHECKSUM_ON_COPY
|
|
#include "lwip/inet_chksum.h"
|
|
#endif
|
|
|
|
#include <string.h>
|
|
|
|
#if ESP_LWIP
|
|
#include "esp_wifi_internal.h"
|
|
#include "esp_eth.h"
|
|
#endif
|
|
|
|
#define SIZEOF_STRUCT_PBUF LWIP_MEM_ALIGN_SIZE(sizeof(struct pbuf))
|
|
/* Since the pool is created in memp, PBUF_POOL_BUFSIZE will be automatically
|
|
aligned there. Therefore, PBUF_POOL_BUFSIZE_ALIGNED can be used here. */
|
|
#define PBUF_POOL_BUFSIZE_ALIGNED LWIP_MEM_ALIGN_SIZE(PBUF_POOL_BUFSIZE)
|
|
|
|
#if !LWIP_TCP || !TCP_QUEUE_OOSEQ || !PBUF_POOL_FREE_OOSEQ
|
|
#define PBUF_POOL_IS_EMPTY()
|
|
#else /* !LWIP_TCP || !TCP_QUEUE_OOSEQ || !PBUF_POOL_FREE_OOSEQ */
|
|
|
|
#if !NO_SYS
|
|
#ifndef PBUF_POOL_FREE_OOSEQ_QUEUE_CALL
|
|
#include "lwip/tcpip.h"
|
|
#define PBUF_POOL_FREE_OOSEQ_QUEUE_CALL() do { \
|
|
if (tcpip_callback_with_block(pbuf_free_ooseq_callback, NULL, 0) != ERR_OK) { \
|
|
SYS_ARCH_PROTECT(old_level); \
|
|
pbuf_free_ooseq_pending = 0; \
|
|
SYS_ARCH_UNPROTECT(old_level); \
|
|
} } while(0)
|
|
#endif /* PBUF_POOL_FREE_OOSEQ_QUEUE_CALL */
|
|
#endif /* !NO_SYS */
|
|
|
|
volatile u8_t pbuf_free_ooseq_pending;
|
|
#define PBUF_POOL_IS_EMPTY() pbuf_pool_is_empty()
|
|
|
|
/**
|
|
* Attempt to reclaim some memory from queued out-of-sequence TCP segments
|
|
* if we run out of pool pbufs. It's better to give priority to new packets
|
|
* if we're running out.
|
|
*
|
|
* This must be done in the correct thread context therefore this function
|
|
* can only be used with NO_SYS=0 and through tcpip_callback.
|
|
*/
|
|
#if !NO_SYS
|
|
static
|
|
#endif /* !NO_SYS */
|
|
void
|
|
pbuf_free_ooseq(void)
|
|
{
|
|
struct tcp_pcb* pcb;
|
|
SYS_ARCH_SET(pbuf_free_ooseq_pending, 0);
|
|
|
|
for (pcb = tcp_active_pcbs; NULL != pcb; pcb = pcb->next) {
|
|
if (NULL != pcb->ooseq) {
|
|
/** Free the ooseq pbufs of one PCB only */
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_free_ooseq: freeing out-of-sequence pbufs\n"));
|
|
tcp_segs_free(pcb->ooseq);
|
|
pcb->ooseq = NULL;
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
#if !NO_SYS
|
|
/**
|
|
* Just a callback function for tcpip_callback() that calls pbuf_free_ooseq().
|
|
*/
|
|
static void
|
|
pbuf_free_ooseq_callback(void *arg)
|
|
{
|
|
LWIP_UNUSED_ARG(arg);
|
|
pbuf_free_ooseq();
|
|
}
|
|
#endif /* !NO_SYS */
|
|
|
|
/** Queue a call to pbuf_free_ooseq if not already queued. */
|
|
static void
|
|
pbuf_pool_is_empty(void)
|
|
{
|
|
#ifndef PBUF_POOL_FREE_OOSEQ_QUEUE_CALL
|
|
SYS_ARCH_SET(pbuf_free_ooseq_pending, 1);
|
|
#else /* PBUF_POOL_FREE_OOSEQ_QUEUE_CALL */
|
|
u8_t queued;
|
|
SYS_ARCH_DECL_PROTECT(old_level);
|
|
SYS_ARCH_PROTECT(old_level);
|
|
queued = pbuf_free_ooseq_pending;
|
|
pbuf_free_ooseq_pending = 1;
|
|
SYS_ARCH_UNPROTECT(old_level);
|
|
|
|
if (!queued) {
|
|
/* queue a call to pbuf_free_ooseq if not already queued */
|
|
PBUF_POOL_FREE_OOSEQ_QUEUE_CALL();
|
|
}
|
|
#endif /* PBUF_POOL_FREE_OOSEQ_QUEUE_CALL */
|
|
}
|
|
#endif /* !LWIP_TCP || !TCP_QUEUE_OOSEQ || !PBUF_POOL_FREE_OOSEQ */
|
|
|
|
/**
|
|
* Allocates a pbuf of the given type (possibly a chain for PBUF_POOL type).
|
|
*
|
|
* The actual memory allocated for the pbuf is determined by the
|
|
* layer at which the pbuf is allocated and the requested size
|
|
* (from the size parameter).
|
|
*
|
|
* @param layer flag to define header size
|
|
* @param length size of the pbuf's payload
|
|
* @param type this parameter decides how and where the pbuf
|
|
* should be allocated as follows:
|
|
*
|
|
* - PBUF_RAM: buffer memory for pbuf is allocated as one large
|
|
* chunk. This includes protocol headers as well.
|
|
* - PBUF_ROM: no buffer memory is allocated for the pbuf, even for
|
|
* protocol headers. Additional headers must be prepended
|
|
* by allocating another pbuf and chain in to the front of
|
|
* the ROM pbuf. It is assumed that the memory used is really
|
|
* similar to ROM in that it is immutable and will not be
|
|
* changed. Memory which is dynamic should generally not
|
|
* be attached to PBUF_ROM pbufs. Use PBUF_REF instead.
|
|
* - PBUF_REF: no buffer memory is allocated for the pbuf, even for
|
|
* protocol headers. It is assumed that the pbuf is only
|
|
* being used in a single thread. If the pbuf gets queued,
|
|
* then pbuf_take should be called to copy the buffer.
|
|
* - PBUF_POOL: the pbuf is allocated as a pbuf chain, with pbufs from
|
|
* the pbuf pool that is allocated during pbuf_init().
|
|
*
|
|
* @return the allocated pbuf. If multiple pbufs where allocated, this
|
|
* is the first pbuf of a pbuf chain.
|
|
*/
|
|
struct pbuf *
|
|
pbuf_alloc(pbuf_layer layer, u16_t length, pbuf_type type)
|
|
{
|
|
struct pbuf *p, *q, *r;
|
|
u16_t offset = 0;
|
|
|
|
s32_t rem_len; /* remaining length */
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloc(length=%"U16_F")\n", length));
|
|
|
|
/* determine header offset */
|
|
switch (layer) {
|
|
case PBUF_TRANSPORT:
|
|
/* add room for transport (often TCP) layer header */
|
|
offset = PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN + PBUF_IP_HLEN + PBUF_TRANSPORT_HLEN;
|
|
|
|
break;
|
|
case PBUF_IP:
|
|
/* add room for IP layer header */
|
|
offset = PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN + PBUF_IP_HLEN;
|
|
|
|
break;
|
|
case PBUF_LINK:
|
|
/* add room for link layer header */
|
|
offset = PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN;
|
|
|
|
break;
|
|
case PBUF_RAW_TX:
|
|
/* add room for encapsulating link layer headers (e.g. 802.11) */
|
|
offset = PBUF_LINK_ENCAPSULATION_HLEN;
|
|
break;
|
|
case PBUF_RAW:
|
|
offset = 0;
|
|
|
|
break;
|
|
default:
|
|
LWIP_ASSERT("pbuf_alloc: bad pbuf layer", 0);
|
|
return NULL;
|
|
}
|
|
|
|
switch (type) {
|
|
case PBUF_POOL:
|
|
/* allocate head of pbuf chain into p */
|
|
p = (struct pbuf *)memp_malloc(MEMP_PBUF_POOL);
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloc: allocated pbuf %p\n", (void *)p));
|
|
if (p == NULL) {
|
|
PBUF_POOL_IS_EMPTY();
|
|
return NULL;
|
|
}
|
|
p->type = type;
|
|
p->next = NULL;
|
|
|
|
/* make the payload pointer point 'offset' bytes into pbuf data memory */
|
|
p->payload = LWIP_MEM_ALIGN((void *)((u8_t *)p + (SIZEOF_STRUCT_PBUF + offset)));
|
|
LWIP_ASSERT("pbuf_alloc: pbuf p->payload properly aligned",
|
|
((mem_ptr_t)p->payload % MEM_ALIGNMENT) == 0);
|
|
/* the total length of the pbuf chain is the requested size */
|
|
p->tot_len = length;
|
|
/* set the length of the first pbuf in the chain */
|
|
p->len = LWIP_MIN(length, PBUF_POOL_BUFSIZE_ALIGNED - LWIP_MEM_ALIGN_SIZE(offset));
|
|
LWIP_ASSERT("check p->payload + p->len does not overflow pbuf",
|
|
((u8_t*)p->payload + p->len <=
|
|
(u8_t*)p + SIZEOF_STRUCT_PBUF + PBUF_POOL_BUFSIZE_ALIGNED));
|
|
LWIP_ASSERT("PBUF_POOL_BUFSIZE must be bigger than MEM_ALIGNMENT",
|
|
(PBUF_POOL_BUFSIZE_ALIGNED - LWIP_MEM_ALIGN_SIZE(offset)) > 0 );
|
|
/* set reference count (needed here in case we fail) */
|
|
p->ref = 1;
|
|
|
|
/* now allocate the tail of the pbuf chain */
|
|
|
|
/* remember first pbuf for linkage in next iteration */
|
|
r = p;
|
|
/* remaining length to be allocated */
|
|
rem_len = length - p->len;
|
|
/* any remaining pbufs to be allocated? */
|
|
while (rem_len > 0) {
|
|
q = (struct pbuf *)memp_malloc(MEMP_PBUF_POOL);
|
|
if (q == NULL) {
|
|
PBUF_POOL_IS_EMPTY();
|
|
/* free chain so far allocated */
|
|
pbuf_free(p);
|
|
/* bail out unsuccessfully */
|
|
return NULL;
|
|
}
|
|
q->type = type;
|
|
q->flags = 0;
|
|
q->next = NULL;
|
|
/* make previous pbuf point to this pbuf */
|
|
r->next = q;
|
|
/* set total length of this pbuf and next in chain */
|
|
LWIP_ASSERT("rem_len < max_u16_t", rem_len < 0xffff);
|
|
q->tot_len = (u16_t)rem_len;
|
|
/* this pbuf length is pool size, unless smaller sized tail */
|
|
q->len = LWIP_MIN((u16_t)rem_len, PBUF_POOL_BUFSIZE_ALIGNED);
|
|
q->payload = (void *)((u8_t *)q + SIZEOF_STRUCT_PBUF);
|
|
LWIP_ASSERT("pbuf_alloc: pbuf q->payload properly aligned",
|
|
((mem_ptr_t)q->payload % MEM_ALIGNMENT) == 0);
|
|
LWIP_ASSERT("check p->payload + p->len does not overflow pbuf",
|
|
((u8_t*)p->payload + p->len <=
|
|
(u8_t*)p + SIZEOF_STRUCT_PBUF + PBUF_POOL_BUFSIZE_ALIGNED));
|
|
q->ref = 1;
|
|
/* calculate remaining length to be allocated */
|
|
rem_len -= q->len;
|
|
/* remember this pbuf for linkage in next iteration */
|
|
r = q;
|
|
}
|
|
/* end of chain */
|
|
/*r->next = NULL;*/
|
|
|
|
break;
|
|
case PBUF_RAM:
|
|
/* If pbuf is to be allocated in RAM, allocate memory for it. */
|
|
p = (struct pbuf*)mem_malloc(LWIP_MEM_ALIGN_SIZE(SIZEOF_STRUCT_PBUF + offset) + LWIP_MEM_ALIGN_SIZE(length));
|
|
if (p == NULL) {
|
|
return NULL;
|
|
}
|
|
/* Set up internal structure of the pbuf. */
|
|
p->payload = LWIP_MEM_ALIGN((void *)((u8_t *)p + SIZEOF_STRUCT_PBUF + offset));
|
|
p->len = p->tot_len = length;
|
|
p->next = NULL;
|
|
p->type = type;
|
|
|
|
LWIP_ASSERT("pbuf_alloc: pbuf->payload properly aligned",
|
|
((mem_ptr_t)p->payload % MEM_ALIGNMENT) == 0);
|
|
break;
|
|
/* pbuf references existing (non-volatile static constant) ROM payload? */
|
|
case PBUF_ROM:
|
|
/* pbuf references existing (externally allocated) RAM payload? */
|
|
case PBUF_REF:
|
|
/* only allocate memory for the pbuf structure */
|
|
p = (struct pbuf *)memp_malloc(MEMP_PBUF);
|
|
if (p == NULL) {
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_LEVEL_SERIOUS,
|
|
("pbuf_alloc: Could not allocate MEMP_PBUF for PBUF_%s.\n",
|
|
(type == PBUF_ROM) ? "ROM" : "REF"));
|
|
return NULL;
|
|
}
|
|
/* caller must set this field properly, afterwards */
|
|
p->payload = NULL;
|
|
p->len = p->tot_len = length;
|
|
p->next = NULL;
|
|
p->type = type;
|
|
break;
|
|
default:
|
|
LWIP_ASSERT("pbuf_alloc: erroneous type", 0);
|
|
return NULL;
|
|
}
|
|
/* set reference count */
|
|
p->ref = 1;
|
|
/* set flags */
|
|
p->flags = 0;
|
|
|
|
#if ESP_LWIP
|
|
p->user_buf = NULL;
|
|
p->user_flag = PBUF_USER_FLAG_OWNER_NULL;
|
|
#endif
|
|
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloc(length=%"U16_F") == %p\n", length, (void *)p));
|
|
return p;
|
|
}
|
|
|
|
#if LWIP_SUPPORT_CUSTOM_PBUF
|
|
/** Initialize a custom pbuf (already allocated).
|
|
*
|
|
* @param layer flag to define header size
|
|
* @param length size of the pbuf's payload
|
|
* @param type type of the pbuf (only used to treat the pbuf accordingly, as
|
|
* this function allocates no memory)
|
|
* @param p pointer to the custom pbuf to initialize (already allocated)
|
|
* @param payload_mem pointer to the buffer that is used for payload and headers,
|
|
* must be at least big enough to hold 'length' plus the header size,
|
|
* may be NULL if set later.
|
|
* ATTENTION: The caller is responsible for correct alignment of this buffer!!
|
|
* @param payload_mem_len the size of the 'payload_mem' buffer, must be at least
|
|
* big enough to hold 'length' plus the header size
|
|
*/
|
|
struct pbuf*
|
|
pbuf_alloced_custom(pbuf_layer l, u16_t length, pbuf_type type, struct pbuf_custom *p,
|
|
void *payload_mem, u16_t payload_mem_len)
|
|
{
|
|
u16_t offset;
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloced_custom(length=%"U16_F")\n", length));
|
|
|
|
/* determine header offset */
|
|
switch (l) {
|
|
case PBUF_TRANSPORT:
|
|
/* add room for transport (often TCP) layer header */
|
|
offset = PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN + PBUF_IP_HLEN + PBUF_TRANSPORT_HLEN;
|
|
break;
|
|
case PBUF_IP:
|
|
/* add room for IP layer header */
|
|
offset = PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN + PBUF_IP_HLEN;
|
|
break;
|
|
case PBUF_LINK:
|
|
/* add room for link layer header */
|
|
offset = PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN;
|
|
break;
|
|
case PBUF_RAW_TX:
|
|
/* add room for encapsulating link layer headers (e.g. 802.11) */
|
|
offset = PBUF_LINK_ENCAPSULATION_HLEN;
|
|
break;
|
|
case PBUF_RAW:
|
|
offset = 0;
|
|
break;
|
|
default:
|
|
LWIP_ASSERT("pbuf_alloced_custom: bad pbuf layer", 0);
|
|
return NULL;
|
|
}
|
|
|
|
if (LWIP_MEM_ALIGN_SIZE(offset) + length > payload_mem_len) {
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_LEVEL_WARNING, ("pbuf_alloced_custom(length=%"U16_F") buffer too short\n", length));
|
|
return NULL;
|
|
}
|
|
|
|
p->pbuf.next = NULL;
|
|
if (payload_mem != NULL) {
|
|
p->pbuf.payload = (u8_t *)payload_mem + LWIP_MEM_ALIGN_SIZE(offset);
|
|
} else {
|
|
p->pbuf.payload = NULL;
|
|
}
|
|
p->pbuf.flags = PBUF_FLAG_IS_CUSTOM;
|
|
p->pbuf.len = p->pbuf.tot_len = length;
|
|
p->pbuf.type = type;
|
|
p->pbuf.ref = 1;
|
|
return &p->pbuf;
|
|
}
|
|
#endif /* LWIP_SUPPORT_CUSTOM_PBUF */
|
|
|
|
/**
|
|
* Shrink a pbuf chain to a desired length.
|
|
*
|
|
* @param p pbuf to shrink.
|
|
* @param new_len desired new length of pbuf chain
|
|
*
|
|
* Depending on the desired length, the first few pbufs in a chain might
|
|
* be skipped and left unchanged. The new last pbuf in the chain will be
|
|
* resized, and any remaining pbufs will be freed.
|
|
*
|
|
* @note If the pbuf is ROM/REF, only the ->tot_len and ->len fields are adjusted.
|
|
* @note May not be called on a packet queue.
|
|
*
|
|
* @note Despite its name, pbuf_realloc cannot grow the size of a pbuf (chain).
|
|
*/
|
|
void
|
|
pbuf_realloc(struct pbuf *p, u16_t new_len)
|
|
{
|
|
struct pbuf *q;
|
|
u16_t rem_len; /* remaining length */
|
|
s32_t grow;
|
|
|
|
LWIP_ASSERT("pbuf_realloc: p != NULL", p != NULL);
|
|
LWIP_ASSERT("pbuf_realloc: sane p->type", p->type == PBUF_POOL ||
|
|
p->type == PBUF_ROM ||
|
|
p->type == PBUF_RAM ||
|
|
p->type == PBUF_REF);
|
|
|
|
/* desired length larger than current length? */
|
|
if (new_len >= p->tot_len) {
|
|
/* enlarging not yet supported */
|
|
return;
|
|
}
|
|
|
|
/* the pbuf chain grows by (new_len - p->tot_len) bytes
|
|
* (which may be negative in case of shrinking) */
|
|
grow = new_len - p->tot_len;
|
|
|
|
/* first, step over any pbufs that should remain in the chain */
|
|
rem_len = new_len;
|
|
q = p;
|
|
/* should this pbuf be kept? */
|
|
while (rem_len > q->len) {
|
|
/* decrease remaining length by pbuf length */
|
|
rem_len -= q->len;
|
|
/* decrease total length indicator */
|
|
LWIP_ASSERT("grow < max_u16_t", grow < 0xffff);
|
|
q->tot_len += (u16_t)grow;
|
|
/* proceed to next pbuf in chain */
|
|
q = q->next;
|
|
LWIP_ASSERT("pbuf_realloc: q != NULL", q != NULL);
|
|
}
|
|
/* we have now reached the new last pbuf (in q) */
|
|
/* rem_len == desired length for pbuf q */
|
|
|
|
/* shrink allocated memory for PBUF_RAM */
|
|
/* (other types merely adjust their length fields */
|
|
if ((q->type == PBUF_RAM) && (rem_len != q->len)
|
|
#if LWIP_SUPPORT_CUSTOM_PBUF
|
|
&& ((q->flags & PBUF_FLAG_IS_CUSTOM) == 0)
|
|
#endif /* LWIP_SUPPORT_CUSTOM_PBUF */
|
|
) {
|
|
/* reallocate and adjust the length of the pbuf that will be split */
|
|
q = (struct pbuf *)mem_trim(q, (u16_t)((u8_t *)q->payload - (u8_t *)q) + rem_len);
|
|
LWIP_ASSERT("mem_trim returned q == NULL", q != NULL);
|
|
}
|
|
/* adjust length fields for new last pbuf */
|
|
q->len = rem_len;
|
|
q->tot_len = q->len;
|
|
|
|
/* any remaining pbufs in chain? */
|
|
if (q->next != NULL) {
|
|
/* free remaining pbufs in chain */
|
|
pbuf_free(q->next);
|
|
}
|
|
/* q is last packet in chain */
|
|
q->next = NULL;
|
|
|
|
}
|
|
|
|
/**
|
|
* Adjusts the payload pointer to hide or reveal headers in the payload.
|
|
* @see pbuf_header.
|
|
*
|
|
* @param p pbuf to change the header size.
|
|
* @param header_size_increment Number of bytes to increment header size.
|
|
* @param force Allow 'header_size_increment > 0' for PBUF_REF/PBUF_ROM types
|
|
*
|
|
* @return non-zero on failure, zero on success.
|
|
*
|
|
*/
|
|
static u8_t
|
|
pbuf_header_impl(struct pbuf *p, s16_t header_size_increment, u8_t force)
|
|
{
|
|
u16_t type;
|
|
void *payload;
|
|
u16_t increment_magnitude;
|
|
|
|
LWIP_ASSERT("p != NULL", p != NULL);
|
|
if ((header_size_increment == 0) || (p == NULL)) {
|
|
return 0;
|
|
}
|
|
|
|
if (header_size_increment < 0) {
|
|
increment_magnitude = -header_size_increment;
|
|
/* Check that we aren't going to move off the end of the pbuf */
|
|
LWIP_ERROR("increment_magnitude <= p->len", (increment_magnitude <= p->len), return 1;);
|
|
} else {
|
|
increment_magnitude = header_size_increment;
|
|
#if 0
|
|
/* Can't assert these as some callers speculatively call
|
|
pbuf_header() to see if it's OK. Will return 1 below instead. */
|
|
/* Check that we've got the correct type of pbuf to work with */
|
|
LWIP_ASSERT("p->type == PBUF_RAM || p->type == PBUF_POOL",
|
|
p->type == PBUF_RAM || p->type == PBUF_POOL);
|
|
/* Check that we aren't going to move off the beginning of the pbuf */
|
|
LWIP_ASSERT("p->payload - increment_magnitude >= p + SIZEOF_STRUCT_PBUF",
|
|
(u8_t *)p->payload - increment_magnitude >= (u8_t *)p + SIZEOF_STRUCT_PBUF);
|
|
#endif
|
|
}
|
|
|
|
type = p->type;
|
|
/* remember current payload pointer */
|
|
payload = p->payload;
|
|
|
|
/* pbuf types containing payloads? */
|
|
if (type == PBUF_RAM || type == PBUF_POOL) {
|
|
/* set new payload pointer */
|
|
p->payload = (u8_t *)p->payload - header_size_increment;
|
|
/* boundary check fails? */
|
|
if ((u8_t *)p->payload < (u8_t *)p + SIZEOF_STRUCT_PBUF) {
|
|
LWIP_DEBUGF( PBUF_DEBUG | LWIP_DBG_LEVEL_SERIOUS,
|
|
("pbuf_header: failed as %p < %p (not enough space for new header size)\n",
|
|
(void *)p->payload, (void *)(p + 1)));
|
|
/* restore old payload pointer */
|
|
p->payload = payload;
|
|
/* bail out unsuccessfully */
|
|
return 1;
|
|
}
|
|
/* pbuf types referring to external payloads? */
|
|
} else if (type == PBUF_REF || type == PBUF_ROM) {
|
|
/* hide a header in the payload? */
|
|
if ((header_size_increment < 0) && (increment_magnitude <= p->len)) {
|
|
/* increase payload pointer */
|
|
p->payload = (u8_t *)p->payload - header_size_increment;
|
|
} else if ((header_size_increment > 0) && force) {
|
|
p->payload = (u8_t *)p->payload - header_size_increment;
|
|
} else {
|
|
/* cannot expand payload to front (yet!)
|
|
* bail out unsuccessfully */
|
|
return 1;
|
|
}
|
|
} else {
|
|
/* Unknown type */
|
|
LWIP_ASSERT("bad pbuf type", 0);
|
|
return 1;
|
|
}
|
|
/* modify pbuf length fields */
|
|
p->len += header_size_increment;
|
|
p->tot_len += header_size_increment;
|
|
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_header: old %p new %p (%"S16_F")\n",
|
|
(void *)payload, (void *)p->payload, header_size_increment));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Adjusts the payload pointer to hide or reveal headers in the payload.
|
|
*
|
|
* Adjusts the ->payload pointer so that space for a header
|
|
* (dis)appears in the pbuf payload.
|
|
*
|
|
* The ->payload, ->tot_len and ->len fields are adjusted.
|
|
*
|
|
* @param p pbuf to change the header size.
|
|
* @param header_size_increment Number of bytes to increment header size which
|
|
* increases the size of the pbuf. New space is on the front.
|
|
* (Using a negative value decreases the header size.)
|
|
* If hdr_size_inc is 0, this function does nothing and returns successful.
|
|
*
|
|
* PBUF_ROM and PBUF_REF type buffers cannot have their sizes increased, so
|
|
* the call will fail. A check is made that the increase in header size does
|
|
* not move the payload pointer in front of the start of the buffer.
|
|
* @return non-zero on failure, zero on success.
|
|
*
|
|
*/
|
|
u8_t
|
|
pbuf_header(struct pbuf *p, s16_t header_size_increment)
|
|
{
|
|
return pbuf_header_impl(p, header_size_increment, 0);
|
|
}
|
|
|
|
/**
|
|
* Same as pbuf_header but does not check if 'header_size > 0' is allowed.
|
|
* This is used internally only, to allow PBUF_REF for RX.
|
|
*/
|
|
u8_t
|
|
pbuf_header_force(struct pbuf *p, s16_t header_size_increment)
|
|
{
|
|
return pbuf_header_impl(p, header_size_increment, 1);
|
|
}
|
|
|
|
/**
|
|
* Dereference a pbuf chain or queue and deallocate any no-longer-used
|
|
* pbufs at the head of this chain or queue.
|
|
*
|
|
* Decrements the pbuf reference count. If it reaches zero, the pbuf is
|
|
* deallocated.
|
|
*
|
|
* For a pbuf chain, this is repeated for each pbuf in the chain,
|
|
* up to the first pbuf which has a non-zero reference count after
|
|
* decrementing. So, when all reference counts are one, the whole
|
|
* chain is free'd.
|
|
*
|
|
* @param p The pbuf (chain) to be dereferenced.
|
|
*
|
|
* @return the number of pbufs that were de-allocated
|
|
* from the head of the chain.
|
|
*
|
|
* @note MUST NOT be called on a packet queue (Not verified to work yet).
|
|
* @note the reference counter of a pbuf equals the number of pointers
|
|
* that refer to the pbuf (or into the pbuf).
|
|
*
|
|
* @internal examples:
|
|
*
|
|
* Assuming existing chains a->b->c with the following reference
|
|
* counts, calling pbuf_free(a) results in:
|
|
*
|
|
* 1->2->3 becomes ...1->3
|
|
* 3->3->3 becomes 2->3->3
|
|
* 1->1->2 becomes ......1
|
|
* 2->1->1 becomes 1->1->1
|
|
* 1->1->1 becomes .......
|
|
*
|
|
*/
|
|
u8_t
|
|
pbuf_free(struct pbuf *p)
|
|
{
|
|
u16_t type;
|
|
struct pbuf *q;
|
|
u8_t count;
|
|
|
|
if (p == NULL) {
|
|
LWIP_ASSERT("p != NULL", p != NULL);
|
|
/* if assertions are disabled, proceed with debug output */
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_LEVEL_SERIOUS,
|
|
("pbuf_free(p == NULL) was called.\n"));
|
|
return 0;
|
|
}
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_free(%p)\n", (void *)p));
|
|
|
|
PERF_START;
|
|
|
|
LWIP_ASSERT("pbuf_free: sane type",
|
|
p->type == PBUF_RAM || p->type == PBUF_ROM ||
|
|
p->type == PBUF_REF || p->type == PBUF_POOL);
|
|
|
|
count = 0;
|
|
/* de-allocate all consecutive pbufs from the head of the chain that
|
|
* obtain a zero reference count after decrementing*/
|
|
while (p != NULL) {
|
|
u16_t ref;
|
|
SYS_ARCH_DECL_PROTECT(old_level);
|
|
/* Since decrementing ref cannot be guaranteed to be a single machine operation
|
|
* we must protect it. We put the new ref into a local variable to prevent
|
|
* further protection. */
|
|
SYS_ARCH_PROTECT(old_level);
|
|
/* all pbufs in a chain are referenced at least once */
|
|
LWIP_ASSERT("pbuf_free: p->ref > 0", p->ref > 0);
|
|
/* decrease reference count (number of pointers to pbuf) */
|
|
ref = --(p->ref);
|
|
SYS_ARCH_UNPROTECT(old_level);
|
|
/* this pbuf is no longer referenced to? */
|
|
if (ref == 0) {
|
|
/* remember next pbuf in chain for next iteration */
|
|
q = p->next;
|
|
LWIP_DEBUGF( PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_free: deallocating %p\n", (void *)p));
|
|
type = p->type;
|
|
#if LWIP_SUPPORT_CUSTOM_PBUF
|
|
/* is this a custom pbuf? */
|
|
if ((p->flags & PBUF_FLAG_IS_CUSTOM) != 0) {
|
|
struct pbuf_custom *pc = (struct pbuf_custom*)p;
|
|
LWIP_ASSERT("pc->custom_free_function != NULL", pc->custom_free_function != NULL);
|
|
pc->custom_free_function(p);
|
|
} else
|
|
#endif /* LWIP_SUPPORT_CUSTOM_PBUF */
|
|
{
|
|
/* is this a pbuf from the pool? */
|
|
if (type == PBUF_POOL) {
|
|
memp_free(MEMP_PBUF_POOL, p);
|
|
/* is this a ROM or RAM referencing pbuf? */
|
|
} else if (type == PBUF_ROM || type == PBUF_REF) {
|
|
|
|
#if ESP_LWIP
|
|
if (type == PBUF_REF && p->user_flag == PBUF_USER_FLAG_OWNER_WIFI ) {
|
|
esp_wifi_internal_free_rx_buffer(p->user_buf);
|
|
}
|
|
if (type == PBUF_REF && p->user_flag == PBUF_USER_FLAG_OWNER_ETH ) {
|
|
esp_eth_free_rx_buf(p->user_buf);
|
|
}
|
|
#endif
|
|
memp_free(MEMP_PBUF, p);
|
|
/* type == PBUF_RAM */
|
|
} else {
|
|
mem_free(p);
|
|
}
|
|
}
|
|
count++;
|
|
/* proceed to next pbuf */
|
|
p = q;
|
|
/* p->ref > 0, this pbuf is still referenced to */
|
|
/* (and so the remaining pbufs in chain as well) */
|
|
} else {
|
|
LWIP_DEBUGF( PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_free: %p has ref %"U16_F", ending here.\n", (void *)p, ref));
|
|
/* stop walking through the chain */
|
|
p = NULL;
|
|
}
|
|
}
|
|
PERF_STOP("pbuf_free");
|
|
/* return number of de-allocated pbufs */
|
|
return count;
|
|
}
|
|
|
|
/**
|
|
* Count number of pbufs in a chain
|
|
*
|
|
* @param p first pbuf of chain
|
|
* @return the number of pbufs in a chain
|
|
*/
|
|
|
|
u8_t
|
|
pbuf_clen(struct pbuf *p)
|
|
{
|
|
u8_t len;
|
|
|
|
len = 0;
|
|
while (p != NULL) {
|
|
++len;
|
|
p = p->next;
|
|
}
|
|
return len;
|
|
}
|
|
|
|
/**
|
|
* Increment the reference count of the pbuf.
|
|
*
|
|
* @param p pbuf to increase reference counter of
|
|
*
|
|
*/
|
|
void
|
|
pbuf_ref(struct pbuf *p)
|
|
{
|
|
SYS_ARCH_DECL_PROTECT(old_level);
|
|
/* pbuf given? */
|
|
if (p != NULL) {
|
|
SYS_ARCH_PROTECT(old_level);
|
|
++(p->ref);
|
|
SYS_ARCH_UNPROTECT(old_level);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Concatenate two pbufs (each may be a pbuf chain) and take over
|
|
* the caller's reference of the tail pbuf.
|
|
*
|
|
* @note The caller MAY NOT reference the tail pbuf afterwards.
|
|
* Use pbuf_chain() for that purpose.
|
|
*
|
|
* @see pbuf_chain()
|
|
*/
|
|
|
|
void
|
|
pbuf_cat(struct pbuf *h, struct pbuf *t)
|
|
{
|
|
struct pbuf *p;
|
|
|
|
LWIP_ERROR("(h != NULL) && (t != NULL) (programmer violates API)",
|
|
((h != NULL) && (t != NULL)), return;);
|
|
|
|
/* proceed to last pbuf of chain */
|
|
for (p = h; p->next != NULL; p = p->next) {
|
|
/* add total length of second chain to all totals of first chain */
|
|
p->tot_len += t->tot_len;
|
|
}
|
|
/* { p is last pbuf of first h chain, p->next == NULL } */
|
|
LWIP_ASSERT("p->tot_len == p->len (of last pbuf in chain)", p->tot_len == p->len);
|
|
LWIP_ASSERT("p->next == NULL", p->next == NULL);
|
|
/* add total length of second chain to last pbuf total of first chain */
|
|
p->tot_len += t->tot_len;
|
|
/* chain last pbuf of head (p) with first of tail (t) */
|
|
p->next = t;
|
|
/* p->next now references t, but the caller will drop its reference to t,
|
|
* so netto there is no change to the reference count of t.
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* Chain two pbufs (or pbuf chains) together.
|
|
*
|
|
* The caller MUST call pbuf_free(t) once it has stopped
|
|
* using it. Use pbuf_cat() instead if you no longer use t.
|
|
*
|
|
* @param h head pbuf (chain)
|
|
* @param t tail pbuf (chain)
|
|
* @note The pbufs MUST belong to the same packet.
|
|
* @note MAY NOT be called on a packet queue.
|
|
*
|
|
* The ->tot_len fields of all pbufs of the head chain are adjusted.
|
|
* The ->next field of the last pbuf of the head chain is adjusted.
|
|
* The ->ref field of the first pbuf of the tail chain is adjusted.
|
|
*
|
|
*/
|
|
void
|
|
pbuf_chain(struct pbuf *h, struct pbuf *t)
|
|
{
|
|
pbuf_cat(h, t);
|
|
/* t is now referenced by h */
|
|
pbuf_ref(t);
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_chain: %p references %p\n", (void *)h, (void *)t));
|
|
}
|
|
|
|
/**
|
|
* Dechains the first pbuf from its succeeding pbufs in the chain.
|
|
*
|
|
* Makes p->tot_len field equal to p->len.
|
|
* @param p pbuf to dechain
|
|
* @return remainder of the pbuf chain, or NULL if it was de-allocated.
|
|
* @note May not be called on a packet queue.
|
|
*/
|
|
struct pbuf *
|
|
pbuf_dechain(struct pbuf *p)
|
|
{
|
|
struct pbuf *q;
|
|
u8_t tail_gone = 1;
|
|
/* tail */
|
|
q = p->next;
|
|
/* pbuf has successor in chain? */
|
|
if (q != NULL) {
|
|
/* assert tot_len invariant: (p->tot_len == p->len + (p->next? p->next->tot_len: 0) */
|
|
LWIP_ASSERT("p->tot_len == p->len + q->tot_len", q->tot_len == p->tot_len - p->len);
|
|
/* enforce invariant if assertion is disabled */
|
|
q->tot_len = p->tot_len - p->len;
|
|
/* decouple pbuf from remainder */
|
|
p->next = NULL;
|
|
/* total length of pbuf p is its own length only */
|
|
p->tot_len = p->len;
|
|
/* q is no longer referenced by p, free it */
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_dechain: unreferencing %p\n", (void *)q));
|
|
tail_gone = pbuf_free(q);
|
|
if (tail_gone > 0) {
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE,
|
|
("pbuf_dechain: deallocated %p (as it is no longer referenced)\n", (void *)q));
|
|
}
|
|
/* return remaining tail or NULL if deallocated */
|
|
}
|
|
/* assert tot_len invariant: (p->tot_len == p->len + (p->next? p->next->tot_len: 0) */
|
|
LWIP_ASSERT("p->tot_len == p->len", p->tot_len == p->len);
|
|
return ((tail_gone > 0) ? NULL : q);
|
|
}
|
|
|
|
/**
|
|
*
|
|
* Create PBUF_RAM copies of pbufs.
|
|
*
|
|
* Used to queue packets on behalf of the lwIP stack, such as
|
|
* ARP based queueing.
|
|
*
|
|
* @note You MUST explicitly use p = pbuf_take(p);
|
|
*
|
|
* @note Only one packet is copied, no packet queue!
|
|
*
|
|
* @param p_to pbuf destination of the copy
|
|
* @param p_from pbuf source of the copy
|
|
*
|
|
* @return ERR_OK if pbuf was copied
|
|
* ERR_ARG if one of the pbufs is NULL or p_to is not big
|
|
* enough to hold p_from
|
|
*/
|
|
err_t
|
|
pbuf_copy(struct pbuf *p_to, struct pbuf *p_from)
|
|
{
|
|
u16_t offset_to=0, offset_from=0, len;
|
|
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_copy(%p, %p)\n",
|
|
(void*)p_to, (void*)p_from));
|
|
|
|
/* is the target big enough to hold the source? */
|
|
LWIP_ERROR("pbuf_copy: target not big enough to hold source", ((p_to != NULL) &&
|
|
(p_from != NULL) && (p_to->tot_len >= p_from->tot_len)), return ERR_ARG;);
|
|
|
|
/* iterate through pbuf chain */
|
|
do
|
|
{
|
|
/* copy one part of the original chain */
|
|
if ((p_to->len - offset_to) >= (p_from->len - offset_from)) {
|
|
/* complete current p_from fits into current p_to */
|
|
len = p_from->len - offset_from;
|
|
} else {
|
|
/* current p_from does not fit into current p_to */
|
|
len = p_to->len - offset_to;
|
|
}
|
|
MEMCPY((u8_t*)p_to->payload + offset_to, (u8_t*)p_from->payload + offset_from, len);
|
|
offset_to += len;
|
|
offset_from += len;
|
|
LWIP_ASSERT("offset_to <= p_to->len", offset_to <= p_to->len);
|
|
LWIP_ASSERT("offset_from <= p_from->len", offset_from <= p_from->len);
|
|
if (offset_from >= p_from->len) {
|
|
/* on to next p_from (if any) */
|
|
offset_from = 0;
|
|
p_from = p_from->next;
|
|
}
|
|
if (offset_to == p_to->len) {
|
|
/* on to next p_to (if any) */
|
|
offset_to = 0;
|
|
p_to = p_to->next;
|
|
LWIP_ERROR("p_to != NULL", (p_to != NULL) || (p_from == NULL) , return ERR_ARG;);
|
|
}
|
|
|
|
if ((p_from != NULL) && (p_from->len == p_from->tot_len)) {
|
|
/* don't copy more than one packet! */
|
|
LWIP_ERROR("pbuf_copy() does not allow packet queues!",
|
|
(p_from->next == NULL), return ERR_VAL;);
|
|
}
|
|
if ((p_to != NULL) && (p_to->len == p_to->tot_len)) {
|
|
/* don't copy more than one packet! */
|
|
LWIP_ERROR("pbuf_copy() does not allow packet queues!",
|
|
(p_to->next == NULL), return ERR_VAL;);
|
|
}
|
|
} while (p_from);
|
|
LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_copy: end of chain reached.\n"));
|
|
return ERR_OK;
|
|
}
|
|
|
|
/**
|
|
* Copy (part of) the contents of a packet buffer
|
|
* to an application supplied buffer.
|
|
*
|
|
* @param buf the pbuf from which to copy data
|
|
* @param dataptr the application supplied buffer
|
|
* @param len length of data to copy (dataptr must be big enough). No more
|
|
* than buf->tot_len will be copied, irrespective of len
|
|
* @param offset offset into the packet buffer from where to begin copying len bytes
|
|
* @return the number of bytes copied, or 0 on failure
|
|
*/
|
|
u16_t
|
|
pbuf_copy_partial(struct pbuf *buf, void *dataptr, u16_t len, u16_t offset)
|
|
{
|
|
struct pbuf *p;
|
|
u16_t left;
|
|
u16_t buf_copy_len;
|
|
u16_t copied_total = 0;
|
|
|
|
LWIP_ERROR("pbuf_copy_partial: invalid buf", (buf != NULL), return 0;);
|
|
LWIP_ERROR("pbuf_copy_partial: invalid dataptr", (dataptr != NULL), return 0;);
|
|
|
|
left = 0;
|
|
|
|
if ((buf == NULL) || (dataptr == NULL)) {
|
|
return 0;
|
|
}
|
|
|
|
/* Note some systems use byte copy if dataptr or one of the pbuf payload pointers are unaligned. */
|
|
for (p = buf; len != 0 && p != NULL; p = p->next) {
|
|
if ((offset != 0) && (offset >= p->len)) {
|
|
/* don't copy from this buffer -> on to the next */
|
|
offset -= p->len;
|
|
} else {
|
|
/* copy from this buffer. maybe only partially. */
|
|
buf_copy_len = p->len - offset;
|
|
if (buf_copy_len > len)
|
|
buf_copy_len = len;
|
|
/* copy the necessary parts of the buffer */
|
|
MEMCPY(&((char*)dataptr)[left], &((char*)p->payload)[offset], buf_copy_len);
|
|
copied_total += buf_copy_len;
|
|
left += buf_copy_len;
|
|
len -= buf_copy_len;
|
|
offset = 0;
|
|
}
|
|
}
|
|
return copied_total;
|
|
}
|
|
|
|
#if LWIP_TCP && TCP_QUEUE_OOSEQ && LWIP_WND_SCALE
|
|
/**
|
|
* This method modifies a 'pbuf chain', so that its total length is
|
|
* smaller than 64K. The remainder of the original pbuf chain is stored
|
|
* in *rest.
|
|
* This function never creates new pbufs, but splits an existing chain
|
|
* in two parts. The tot_len of the modified packet queue will likely be
|
|
* smaller than 64K.
|
|
* 'packet queues' are not supported by this function.
|
|
*
|
|
* @param p the pbuf queue to be split
|
|
* @param rest pointer to store the remainder (after the first 64K)
|
|
*/
|
|
void pbuf_split_64k(struct pbuf *p, struct pbuf **rest)
|
|
{
|
|
*rest = NULL;
|
|
if ((p != NULL) && (p->next != NULL)) {
|
|
u16_t tot_len_front = p->len;
|
|
struct pbuf *i = p;
|
|
struct pbuf *r = p->next;
|
|
|
|
/* continue until the total length (summed up as u16_t) overflows */
|
|
while ((r != NULL) && ((u16_t)(tot_len_front + r->len) > tot_len_front)) {
|
|
tot_len_front += r->len;
|
|
i = r;
|
|
r = r->next;
|
|
}
|
|
/* i now points to last packet of the first segment. Set next
|
|
pointer to NULL */
|
|
i->next = NULL;
|
|
|
|
if (r != NULL) {
|
|
/* Update the tot_len field in the first part */
|
|
for (i = p; i != NULL; i = i->next) {
|
|
i->tot_len -= r->tot_len;
|
|
LWIP_ASSERT("tot_len/len mismatch in last pbuf",
|
|
(i->next != NULL) || (i->tot_len == i->len));
|
|
}
|
|
if (p->flags & PBUF_FLAG_TCP_FIN) {
|
|
r->flags |= PBUF_FLAG_TCP_FIN;
|
|
}
|
|
|
|
/* tot_len field in rest does not need modifications */
|
|
/* reference counters do not need modifications */
|
|
*rest = r;
|
|
}
|
|
}
|
|
}
|
|
#endif /* LWIP_TCP && TCP_QUEUE_OOSEQ && LWIP_WND_SCALE */
|
|
|
|
/**
|
|
* Skip a number of bytes at the start of a pbuf
|
|
*
|
|
* @param in input pbuf
|
|
* @param in_offset offset to skip
|
|
* @param out_offset resulting offset in the returned pbuf
|
|
* @return the pbuf in the queue where the offset is
|
|
*/
|
|
struct pbuf*
|
|
pbuf_skip(struct pbuf* in, u16_t in_offset, u16_t* out_offset)
|
|
{
|
|
u16_t offset_left = in_offset;
|
|
struct pbuf* q = in;
|
|
|
|
/* get the correct pbuf */
|
|
while ((q != NULL) && (q->len <= offset_left)) {
|
|
offset_left -= q->len;
|
|
q = q->next;
|
|
}
|
|
if (out_offset != NULL) {
|
|
*out_offset = offset_left;
|
|
}
|
|
return q;
|
|
}
|
|
|
|
/**
|
|
* Copy application supplied data into a pbuf.
|
|
* This function can only be used to copy the equivalent of buf->tot_len data.
|
|
*
|
|
* @param buf pbuf to fill with data
|
|
* @param dataptr application supplied data buffer
|
|
* @param len length of the application supplied data buffer
|
|
*
|
|
* @return ERR_OK if successful, ERR_MEM if the pbuf is not big enough
|
|
*/
|
|
err_t
|
|
pbuf_take(struct pbuf *buf, const void *dataptr, u16_t len)
|
|
{
|
|
struct pbuf *p;
|
|
u16_t buf_copy_len;
|
|
u16_t total_copy_len = len;
|
|
u16_t copied_total = 0;
|
|
|
|
LWIP_ERROR("pbuf_take: invalid buf", (buf != NULL), return ERR_ARG;);
|
|
LWIP_ERROR("pbuf_take: invalid dataptr", (dataptr != NULL), return ERR_ARG;);
|
|
LWIP_ERROR("pbuf_take: buf not large enough", (buf->tot_len >= len), return ERR_MEM;);
|
|
|
|
if ((buf == NULL) || (dataptr == NULL) || (buf->tot_len < len)) {
|
|
return ERR_ARG;
|
|
}
|
|
|
|
/* Note some systems use byte copy if dataptr or one of the pbuf payload pointers are unaligned. */
|
|
for (p = buf; total_copy_len != 0; p = p->next) {
|
|
LWIP_ASSERT("pbuf_take: invalid pbuf", p != NULL);
|
|
buf_copy_len = total_copy_len;
|
|
if (buf_copy_len > p->len) {
|
|
/* this pbuf cannot hold all remaining data */
|
|
buf_copy_len = p->len;
|
|
}
|
|
/* copy the necessary parts of the buffer */
|
|
MEMCPY(p->payload, &((const char*)dataptr)[copied_total], buf_copy_len);
|
|
total_copy_len -= buf_copy_len;
|
|
copied_total += buf_copy_len;
|
|
}
|
|
LWIP_ASSERT("did not copy all data", total_copy_len == 0 && copied_total == len);
|
|
return ERR_OK;
|
|
}
|
|
|
|
/**
|
|
* Same as pbuf_take() but puts data at an offset
|
|
*
|
|
* @param buf pbuf to fill with data
|
|
* @param dataptr application supplied data buffer
|
|
* @param len length of the application supplied data buffer
|
|
*
|
|
* @return ERR_OK if successful, ERR_MEM if the pbuf is not big enough
|
|
*/
|
|
err_t
|
|
pbuf_take_at(struct pbuf *buf, const void *dataptr, u16_t len, u16_t offset)
|
|
{
|
|
u16_t target_offset;
|
|
struct pbuf* q = pbuf_skip(buf, offset, &target_offset);
|
|
|
|
/* return requested data if pbuf is OK */
|
|
if ((q != NULL) && (q->tot_len >= target_offset + len)) {
|
|
u16_t remaining_len = len;
|
|
const u8_t* src_ptr = (const u8_t*)dataptr;
|
|
/* copy the part that goes into the first pbuf */
|
|
u16_t first_copy_len = LWIP_MIN(q->len - target_offset, len);
|
|
MEMCPY(((u8_t*)q->payload) + target_offset, dataptr, first_copy_len);
|
|
remaining_len -= first_copy_len;
|
|
src_ptr += first_copy_len;
|
|
if (remaining_len > 0) {
|
|
return pbuf_take(q->next, src_ptr, remaining_len);
|
|
}
|
|
return ERR_OK;
|
|
}
|
|
return ERR_MEM;
|
|
}
|
|
|
|
/**
|
|
* Creates a single pbuf out of a queue of pbufs.
|
|
*
|
|
* @remark: Either the source pbuf 'p' is freed by this function or the original
|
|
* pbuf 'p' is returned, therefore the caller has to check the result!
|
|
*
|
|
* @param p the source pbuf
|
|
* @param layer pbuf_layer of the new pbuf
|
|
*
|
|
* @return a new, single pbuf (p->next is NULL)
|
|
* or the old pbuf if allocation fails
|
|
*/
|
|
struct pbuf*
|
|
pbuf_coalesce(struct pbuf *p, pbuf_layer layer)
|
|
{
|
|
struct pbuf *q;
|
|
err_t err;
|
|
if (p->next == NULL) {
|
|
return p;
|
|
}
|
|
q = pbuf_alloc(layer, p->tot_len, PBUF_RAM);
|
|
if (q == NULL) {
|
|
/* @todo: what do we do now? */
|
|
return p;
|
|
}
|
|
err = pbuf_copy(q, p);
|
|
LWIP_ASSERT("pbuf_copy failed", err == ERR_OK);
|
|
pbuf_free(p);
|
|
return q;
|
|
}
|
|
|
|
#if LWIP_CHECKSUM_ON_COPY
|
|
/**
|
|
* Copies data into a single pbuf (*not* into a pbuf queue!) and updates
|
|
* the checksum while copying
|
|
*
|
|
* @param p the pbuf to copy data into
|
|
* @param start_offset offset of p->payload where to copy the data to
|
|
* @param dataptr data to copy into the pbuf
|
|
* @param len length of data to copy into the pbuf
|
|
* @param chksum pointer to the checksum which is updated
|
|
* @return ERR_OK if successful, another error if the data does not fit
|
|
* within the (first) pbuf (no pbuf queues!)
|
|
*/
|
|
err_t
|
|
pbuf_fill_chksum(struct pbuf *p, u16_t start_offset, const void *dataptr,
|
|
u16_t len, u16_t *chksum)
|
|
{
|
|
u32_t acc;
|
|
u16_t copy_chksum;
|
|
char *dst_ptr;
|
|
LWIP_ASSERT("p != NULL", p != NULL);
|
|
LWIP_ASSERT("dataptr != NULL", dataptr != NULL);
|
|
LWIP_ASSERT("chksum != NULL", chksum != NULL);
|
|
LWIP_ASSERT("len != 0", len != 0);
|
|
|
|
if ((start_offset >= p->len) || (start_offset + len > p->len)) {
|
|
return ERR_ARG;
|
|
}
|
|
|
|
dst_ptr = ((char*)p->payload) + start_offset;
|
|
copy_chksum = LWIP_CHKSUM_COPY(dst_ptr, dataptr, len);
|
|
if ((start_offset & 1) != 0) {
|
|
copy_chksum = SWAP_BYTES_IN_WORD(copy_chksum);
|
|
}
|
|
acc = *chksum;
|
|
acc += copy_chksum;
|
|
*chksum = FOLD_U32T(acc);
|
|
return ERR_OK;
|
|
}
|
|
#endif /* LWIP_CHECKSUM_ON_COPY */
|
|
|
|
/** Get one byte from the specified position in a pbuf
|
|
* WARNING: returns zero for offset >= p->tot_len
|
|
*
|
|
* @param p pbuf to parse
|
|
* @param offset offset into p of the byte to return
|
|
* @return byte at an offset into p OR ZERO IF 'offset' >= p->tot_len
|
|
*/
|
|
u8_t
|
|
pbuf_get_at(struct pbuf* p, u16_t offset)
|
|
{
|
|
u16_t q_idx;
|
|
struct pbuf* q = pbuf_skip(p, offset, &q_idx);
|
|
|
|
/* return requested data if pbuf is OK */
|
|
if ((q != NULL) && (q->len > q_idx)) {
|
|
return ((u8_t*)q->payload)[q_idx];
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/** Put one byte to the specified position in a pbuf
|
|
* WARNING: silently ignores offset >= p->tot_len
|
|
*
|
|
* @param p pbuf to fill
|
|
* @param offset offset into p of the byte to write
|
|
* @param data byte to write at an offset into p
|
|
*/
|
|
void
|
|
pbuf_put_at(struct pbuf* p, u16_t offset, u8_t data)
|
|
{
|
|
u16_t q_idx;
|
|
struct pbuf* q = pbuf_skip(p, offset, &q_idx);
|
|
|
|
/* write requested data if pbuf is OK */
|
|
if ((q != NULL) && (q->len > q_idx)) {
|
|
((u8_t*)q->payload)[q_idx] = data;
|
|
}
|
|
}
|
|
|
|
/** Compare pbuf contents at specified offset with memory s2, both of length n
|
|
*
|
|
* @param p pbuf to compare
|
|
* @param offset offset into p at which to start comparing
|
|
* @param s2 buffer to compare
|
|
* @param n length of buffer to compare
|
|
* @return zero if equal, nonzero otherwise
|
|
* (0xffff if p is too short, diffoffset+1 otherwise)
|
|
*/
|
|
u16_t
|
|
pbuf_memcmp(struct pbuf* p, u16_t offset, const void* s2, u16_t n)
|
|
{
|
|
u16_t start = offset;
|
|
struct pbuf* q = p;
|
|
|
|
/* get the correct pbuf */
|
|
while ((q != NULL) && (q->len <= start)) {
|
|
start -= q->len;
|
|
q = q->next;
|
|
}
|
|
/* return requested data if pbuf is OK */
|
|
if ((q != NULL) && (q->len > start)) {
|
|
u16_t i;
|
|
for (i = 0; i < n; i++) {
|
|
u8_t a = pbuf_get_at(q, start + i);
|
|
u8_t b = ((const u8_t*)s2)[i];
|
|
if (a != b) {
|
|
return i+1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
return 0xffff;
|
|
}
|
|
|
|
/** Find occurrence of mem (with length mem_len) in pbuf p, starting at offset
|
|
* start_offset.
|
|
*
|
|
* @param p pbuf to search, maximum length is 0xFFFE since 0xFFFF is used as
|
|
* return value 'not found'
|
|
* @param mem search for the contents of this buffer
|
|
* @param mem_len length of 'mem'
|
|
* @param start_offset offset into p at which to start searching
|
|
* @return 0xFFFF if substr was not found in p or the index where it was found
|
|
*/
|
|
u16_t
|
|
pbuf_memfind(struct pbuf* p, const void* mem, u16_t mem_len, u16_t start_offset)
|
|
{
|
|
u16_t i;
|
|
u16_t max = p->tot_len - mem_len;
|
|
if (p->tot_len >= mem_len + start_offset) {
|
|
for (i = start_offset; i <= max; i++) {
|
|
u16_t plus = pbuf_memcmp(p, i, mem, mem_len);
|
|
if (plus == 0) {
|
|
return i;
|
|
}
|
|
}
|
|
}
|
|
return 0xFFFF;
|
|
}
|
|
|
|
/** Find occurrence of substr with length substr_len in pbuf p, start at offset
|
|
* start_offset
|
|
* WARNING: in contrast to strstr(), this one does not stop at the first \0 in
|
|
* the pbuf/source string!
|
|
*
|
|
* @param p pbuf to search, maximum length is 0xFFFE since 0xFFFF is used as
|
|
* return value 'not found'
|
|
* @param substr string to search for in p, maximum length is 0xFFFE
|
|
* @return 0xFFFF if substr was not found in p or the index where it was found
|
|
*/
|
|
u16_t
|
|
pbuf_strstr(struct pbuf* p, const char* substr)
|
|
{
|
|
size_t substr_len;
|
|
if ((substr == NULL) || (substr[0] == 0) || (p->tot_len == 0xFFFF)) {
|
|
return 0xFFFF;
|
|
}
|
|
substr_len = strlen(substr);
|
|
if (substr_len >= 0xFFFF) {
|
|
return 0xFFFF;
|
|
}
|
|
return pbuf_memfind(p, substr, (u16_t)substr_len, 0);
|
|
}
|