OVMS3-idf/examples/protocols/asio/tcp_echo_server
2019-05-21 09:09:01 +02:00
..
main examples/protocols/asio: use common network component 2019-04-15 03:32:05 +00:00
asio_tcp_server_test.py examples/protocols/asio: use common network component 2019-04-15 03:32:05 +00:00
CMakeLists.txt examples/protocols/asio: use common network component 2019-04-15 03:32:05 +00:00
Makefile examples/protocols/asio: use common network component 2019-04-15 03:32:05 +00:00
README.md examples/protocols/asio: use common network component 2019-04-15 03:32:05 +00:00
sdkconfig.defaults Rename Kconfig options (components/esp32) 2019-05-21 09:09:01 +02:00

Asio TCP echo server example

Simple Asio TCP echo server using WiFi STA or Ethernet.

Example workflow

  • Wi-Fi or Ethernet connection is established, and IP address is obtained.
  • Asio TCP server is started on port number defined through make menuconfig.
  • Server receives and echoes back messages transmitted from client.

Running the example

  • Run make menuconfig to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details.
  • Set server port number in menuconfig, "Example configuration".
  • Run make flash monitor to build and upload the example to your board and connect to it's serial terminal.
  • Wait for the board to connect to WiFi or Ethernet (note the IP address).
  • You can now send a TCP message and check it is repeated, for example using netcat nc IP PORT.

See the README.md file in the upper level 'examples' directory for more information about examples.