OVMS3-idf/components/xtensa-debug-module/trax.c
Ivan Grokhotkov 639557d975 trace: add Kconfig options for app level trace
CONFIG_MEMMAP_TRACEMEM is now a hidden underlying option, which can be enabled using either CONFIG_ESP32_TRAX or CONFIG_ESP32_APP_TRACE
2017-04-17 22:19:14 +03:00

84 lines
3.2 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdio.h>
#include "soc/dport_reg.h"
#include "sdkconfig.h"
#include "esp_err.h"
#include "eri.h"
#include "xtensa-debug-module.h"
#include "trax.h"
#include "esp_log.h"
#define TRACEMEM_MUX_PROBLK0_APPBLK1 0
#define TRACEMEM_MUX_BLK0_ONLY 1
#define TRACEMEM_MUX_BLK1_ONLY 2
#define TRACEMEM_MUX_PROBLK1_APPBLK0 3
static const char* TAG = "trax";
int trax_enable(trax_ena_select_t which)
{
#if !CONFIG_ESP32_TRAX
ESP_LOGE(TAG, "Trax_enable called, but trax is disabled in menuconfig!");
return ESP_ERR_NO_MEM;
#endif
#if !CONFIG_ESP32_TRAX_TWOBANKS
if (which == TRAX_ENA_PRO_APP || which == TRAX_ENA_PRO_APP_SWAP) return ESP_ERR_NO_MEM;
#endif
if (which == TRAX_ENA_PRO_APP || which == TRAX_ENA_PRO_APP_SWAP) {
WRITE_PERI_REG(DPORT_TRACEMEM_MUX_MODE_REG, (which == TRAX_ENA_PRO_APP_SWAP)?TRACEMEM_MUX_PROBLK1_APPBLK0:TRACEMEM_MUX_PROBLK0_APPBLK1);
} else {
WRITE_PERI_REG(DPORT_TRACEMEM_MUX_MODE_REG, TRACEMEM_MUX_BLK0_ONLY);
}
WRITE_PERI_REG(DPORT_PRO_TRACEMEM_ENA_REG, (which == TRAX_ENA_PRO_APP || which == TRAX_ENA_PRO_APP_SWAP || which == TRAX_ENA_PRO));
WRITE_PERI_REG(DPORT_APP_TRACEMEM_ENA_REG, (which == TRAX_ENA_PRO_APP || which == TRAX_ENA_PRO_APP_SWAP || which == TRAX_ENA_APP));
return ESP_OK;
}
int trax_start_trace(trax_downcount_unit_t units_until_stop)
{
#if !CONFIG_ESP32_TRAX
ESP_LOGE(TAG, "Trax_start_trace called, but trax is disabled in menuconfig!");
return ESP_ERR_NO_MEM;
#endif
uint32_t v;
if (eri_read(ERI_TRAX_TRAXSTAT)&TRAXSTAT_TRACT) {
ESP_LOGI(TAG, "Stopping active trace first.");
//Trace is active. Stop trace.
eri_write(ERI_TRAX_DELAYCNT, 0);
eri_write(ERI_TRAX_TRAXCTRL, eri_read(ERI_TRAX_TRAXCTRL)|TRAXCTRL_TRSTP);
//ToDo: This will probably trigger a trace done interrupt. ToDo: Fix, but how? -JD
eri_write(ERI_TRAX_TRAXCTRL, 0);
}
eri_write(ERI_TRAX_PCMATCHCTRL, 31); //do not stop at any pc match
v=TRAXCTRL_TREN | TRAXCTRL_TMEN | TRAXCTRL_PTOWS | (1<<TRAXCTRL_SMPER_SHIFT);
if (units_until_stop == TRAX_DOWNCOUNT_INSTRUCTIONS) v|=TRAXCTRL_CNTU;
//Enable trace. This trace has no stop condition and will just keep on running.
eri_write(ERI_TRAX_TRAXCTRL, v);
return ESP_OK;
}
int trax_trigger_traceend_after_delay(int delay)
{
#if !CONFIG_ESP32_TRAX
ESP_LOGE(TAG, "Trax_trigger_traceend_after_delay called, but trax is disabled in menuconfig!");
return ESP_ERR_NO_MEM;
#endif
eri_write(ERI_TRAX_DELAYCNT, delay);
eri_write(ERI_TRAX_TRAXCTRL, eri_read(ERI_TRAX_TRAXCTRL)|TRAXCTRL_TRSTP);
return ESP_OK;
}