322 lines
12 KiB
C
322 lines
12 KiB
C
/**
|
|
* I2S test environment UT_T1_I2S:
|
|
* connect GPIO18 and GPIO19, GPIO25 and GPIO26, GPIO21 and GPIO22
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "driver/i2s.h"
|
|
#include "unity.h"
|
|
#include "math.h"
|
|
|
|
#define SAMPLE_RATE (36000)
|
|
#define SAMPLE_BITS (16)
|
|
#define MASTER_BCK_IO 18
|
|
#define MASTER_WS_IO 25
|
|
#define SLAVE_BCK_IO 19
|
|
#define SLAVE_WS_IO 26
|
|
#define DATA_IN_IO 21
|
|
#define DATA_OUT_IO 22
|
|
#define PERCENT_DIFF 0.0001
|
|
|
|
/**
|
|
* i2s initialize test
|
|
* 1. i2s_driver_install
|
|
* 2. i2s_set_pin
|
|
*/
|
|
TEST_CASE("I2S basic driver install, uninstall, set pin test", "[i2s]")
|
|
{
|
|
// dac, adc i2s
|
|
i2s_config_t i2s_config = {
|
|
.mode = I2S_MODE_MASTER | I2S_MODE_TX,
|
|
.sample_rate = SAMPLE_RATE,
|
|
.bits_per_sample = SAMPLE_BITS,
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
|
.communication_format = I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB,
|
|
.dma_buf_count = 6,
|
|
.dma_buf_len = 60,
|
|
.use_apll = 0,
|
|
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1 ,
|
|
};
|
|
|
|
//install and start i2s driver
|
|
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL));
|
|
//for internal DAC, this will enable both of the internal channels
|
|
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, NULL));
|
|
//stop & destroy i2s driver
|
|
TEST_ESP_OK(i2s_driver_uninstall(I2S_NUM_0));
|
|
|
|
// normal i2s
|
|
i2s_pin_config_t pin_config = {
|
|
.bck_io_num = MASTER_BCK_IO,
|
|
.ws_io_num = MASTER_WS_IO,
|
|
.data_out_num = DATA_OUT_IO,
|
|
.data_in_num = -1
|
|
};
|
|
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL));
|
|
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &pin_config));
|
|
TEST_ESP_OK(i2s_driver_uninstall(I2S_NUM_0));
|
|
|
|
//error param test
|
|
TEST_ASSERT(i2s_driver_install(I2S_NUM_MAX, &i2s_config, 0, NULL) == ESP_ERR_INVALID_ARG);
|
|
TEST_ASSERT(i2s_driver_install(I2S_NUM_0, NULL, 0, NULL) == ESP_ERR_INVALID_ARG);
|
|
i2s_config.dma_buf_count = 1;
|
|
TEST_ASSERT(i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL) == ESP_ERR_INVALID_ARG);
|
|
i2s_config.dma_buf_count = 129;
|
|
TEST_ASSERT(i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL) == ESP_ERR_INVALID_ARG);
|
|
TEST_ESP_OK(i2s_driver_uninstall(I2S_NUM_0));
|
|
}
|
|
|
|
TEST_CASE("I2S write and read test(master tx and slave rx)", "[i2s][test_env=UT_T1_I2S]")
|
|
{
|
|
// master driver installed and send data
|
|
i2s_config_t master_i2s_config = {
|
|
.mode = I2S_MODE_MASTER | I2S_MODE_TX,
|
|
.sample_rate = SAMPLE_RATE,
|
|
.bits_per_sample = SAMPLE_BITS,
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
|
.communication_format = I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB,
|
|
.dma_buf_count = 6,
|
|
.dma_buf_len = 100,
|
|
.use_apll = 0,
|
|
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1 ,
|
|
};
|
|
i2s_pin_config_t master_pin_config = {
|
|
.bck_io_num = MASTER_BCK_IO,
|
|
.ws_io_num = MASTER_WS_IO,
|
|
.data_out_num = DATA_OUT_IO,
|
|
.data_in_num = -1
|
|
};
|
|
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &master_i2s_config, 0, NULL));
|
|
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &master_pin_config));
|
|
printf("\r\nheap size: %d\n", esp_get_free_heap_size());
|
|
|
|
i2s_config_t slave_i2s_config = {
|
|
.mode = I2S_MODE_SLAVE | I2S_MODE_RX,
|
|
.sample_rate = SAMPLE_RATE,
|
|
.bits_per_sample = SAMPLE_BITS,
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
|
.communication_format = I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB,
|
|
.dma_buf_count = 6,
|
|
.dma_buf_len = 100,
|
|
.use_apll = 0,
|
|
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1 ,
|
|
};
|
|
i2s_pin_config_t slave_pin_config = {
|
|
.bck_io_num = SLAVE_BCK_IO,
|
|
.ws_io_num = SLAVE_WS_IO,
|
|
.data_out_num = -1,
|
|
.data_in_num = DATA_IN_IO,
|
|
};
|
|
// slave driver installed and receive data
|
|
TEST_ESP_OK(i2s_driver_install(I2S_NUM_1, &slave_i2s_config, 0, NULL));
|
|
TEST_ESP_OK(i2s_set_pin(I2S_NUM_1, &slave_pin_config));
|
|
printf("\r\nheap size: %d\n", esp_get_free_heap_size());
|
|
|
|
uint8_t* data_wr = (uint8_t*)malloc(sizeof(uint8_t)*400);
|
|
size_t i2s_bytes_write = 0;
|
|
size_t bytes_read = 0;
|
|
int length = 0;
|
|
uint8_t *i2s_read_buff = (uint8_t*)malloc(sizeof(uint8_t)*10000);
|
|
|
|
for(int i=0; i<100; i++) {
|
|
data_wr[i] = i+1;
|
|
}
|
|
int flag=0; // break loop flag
|
|
int end_position = 0;
|
|
// write data to slave
|
|
i2s_write(I2S_NUM_0, data_wr, sizeof(uint8_t)*400, &i2s_bytes_write, 1000 / portTICK_PERIOD_MS);
|
|
while(!flag){
|
|
i2s_read(I2S_NUM_1, i2s_read_buff + length, sizeof(uint8_t)*500, &bytes_read, 1000/portMAX_DELAY);
|
|
if(bytes_read>0) {
|
|
printf("read data size: %d\n", bytes_read);
|
|
for(int i=length; i<length + bytes_read; i++) {
|
|
if(i2s_read_buff[i] == 100) {
|
|
flag=1;
|
|
end_position = i;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
length = length + bytes_read;
|
|
}
|
|
// test the readed data right or not
|
|
for(int i=end_position-99; i<=end_position; i++) {
|
|
TEST_ASSERT(*(i2s_read_buff + i) == (i-end_position+100));
|
|
}
|
|
free(data_wr);
|
|
free(i2s_read_buff);
|
|
i2s_driver_uninstall(I2S_NUM_0);
|
|
i2s_driver_uninstall(I2S_NUM_1);
|
|
}
|
|
|
|
TEST_CASE("I2S write and read test(master rx and slave tx)", "[i2s][test_env=UT_T1_I2S]")
|
|
{
|
|
// master driver installed and send data
|
|
i2s_config_t master_i2s_config = {
|
|
.mode = I2S_MODE_MASTER | I2S_MODE_RX,
|
|
.sample_rate = SAMPLE_RATE,
|
|
.bits_per_sample = SAMPLE_BITS,
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
|
.communication_format = I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB,
|
|
.dma_buf_count = 6,
|
|
.dma_buf_len = 100,
|
|
.use_apll = 0,
|
|
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1 ,
|
|
};
|
|
i2s_pin_config_t master_pin_config = {
|
|
.bck_io_num = MASTER_BCK_IO,
|
|
.ws_io_num = MASTER_WS_IO,
|
|
.data_out_num = -1,
|
|
.data_in_num = DATA_IN_IO,
|
|
};
|
|
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &master_i2s_config, 0, NULL));
|
|
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &master_pin_config));
|
|
printf("\r\nheap size: %d\n", esp_get_free_heap_size());
|
|
|
|
i2s_config_t slave_i2s_config = {
|
|
.mode = I2S_MODE_SLAVE | I2S_MODE_TX, // Only RX
|
|
.sample_rate = SAMPLE_RATE,
|
|
.bits_per_sample = SAMPLE_BITS,
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT, //2-channels
|
|
.communication_format = I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB,
|
|
.dma_buf_count = 6,
|
|
.dma_buf_len = 100,
|
|
.use_apll = 0,
|
|
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1 ,
|
|
};
|
|
i2s_pin_config_t slave_pin_config = {
|
|
.bck_io_num = SLAVE_BCK_IO,
|
|
.ws_io_num = SLAVE_WS_IO,
|
|
.data_out_num = DATA_OUT_IO,
|
|
.data_in_num = -1
|
|
};
|
|
// slave driver installed and receive data
|
|
TEST_ESP_OK(i2s_driver_install(I2S_NUM_1, &slave_i2s_config, 0, NULL));
|
|
TEST_ESP_OK(i2s_set_pin(I2S_NUM_1, &slave_pin_config));
|
|
|
|
uint8_t* data_wr = (uint8_t*)malloc(sizeof(uint8_t)*400);
|
|
size_t i2s_bytes_write = 0;
|
|
size_t bytes_read = 0;
|
|
int length = 0;
|
|
uint8_t *i2s_read_buff = (uint8_t*)malloc(sizeof(uint8_t)*100000);
|
|
|
|
for(int i=0; i<100; i++) {
|
|
data_wr[i] = i+1;
|
|
}
|
|
// slave write data to master
|
|
i2s_write(I2S_NUM_1, data_wr, sizeof(uint8_t)*400, &i2s_bytes_write, 1000 / portTICK_PERIOD_MS);
|
|
|
|
int flag=0; // break loop flag
|
|
int end_position = 0;
|
|
// write data to slave
|
|
while(!flag){
|
|
TEST_ESP_OK(i2s_read(I2S_NUM_0, i2s_read_buff + length, 10000-length, &bytes_read, 1000/portMAX_DELAY));
|
|
if(bytes_read > 0) {
|
|
for(int i=length; i<length+bytes_read; i++) {
|
|
if(i2s_read_buff[i] == 100) {
|
|
flag=1;
|
|
end_position = i;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
length = length + bytes_read;
|
|
}
|
|
// test the readed data right or not
|
|
for(int i=end_position-99; i<=end_position; i++) {
|
|
TEST_ASSERT(*(i2s_read_buff + i) == (i-end_position+100));
|
|
}
|
|
free(data_wr);
|
|
free(i2s_read_buff);
|
|
i2s_driver_uninstall(I2S_NUM_0);
|
|
i2s_driver_uninstall(I2S_NUM_1);
|
|
}
|
|
|
|
TEST_CASE("I2S memory leaking test", "[i2s]")
|
|
{
|
|
i2s_config_t master_i2s_config = {
|
|
.mode = I2S_MODE_MASTER | I2S_MODE_RX,
|
|
.sample_rate = SAMPLE_RATE,
|
|
.bits_per_sample = SAMPLE_BITS,
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
|
.communication_format = I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB,
|
|
.dma_buf_count = 6,
|
|
.dma_buf_len = 100,
|
|
.use_apll = 0,
|
|
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1 ,
|
|
};
|
|
i2s_pin_config_t master_pin_config = {
|
|
.bck_io_num = MASTER_BCK_IO,
|
|
.ws_io_num = MASTER_WS_IO,
|
|
.data_out_num = -1,
|
|
.data_in_num = DATA_IN_IO
|
|
};
|
|
|
|
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &master_i2s_config, 0, NULL));
|
|
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &master_pin_config));
|
|
i2s_driver_uninstall(I2S_NUM_0);
|
|
int initial_size = esp_get_free_heap_size();
|
|
|
|
for(int i=0; i<100; i++) {
|
|
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &master_i2s_config, 0, NULL));
|
|
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &master_pin_config));
|
|
i2s_driver_uninstall(I2S_NUM_0);
|
|
TEST_ASSERT(initial_size == esp_get_free_heap_size());
|
|
}
|
|
vTaskDelay(100 / portTICK_PERIOD_MS);
|
|
TEST_ASSERT(initial_size == esp_get_free_heap_size());
|
|
}
|
|
|
|
/*
|
|
* The I2S APLL clock variation test used to test the difference between the different sample rates, different bits per sample
|
|
* and the APLL clock generate for it. The TEST_CASE passes PERCENT_DIFF variation from the provided sample rate in APLL generated clock
|
|
* The percentage difference calculated as (mod((obtained clock rate - desired clock rate)/(desired clock rate))) * 100.
|
|
*/
|
|
TEST_CASE("I2S APLL clock variation test", "[i2s]")
|
|
{
|
|
i2s_pin_config_t pin_config = {
|
|
.bck_io_num = MASTER_BCK_IO,
|
|
.ws_io_num = MASTER_WS_IO,
|
|
.data_out_num = DATA_OUT_IO,
|
|
.data_in_num = -1
|
|
};
|
|
|
|
i2s_config_t i2s_config = {
|
|
.mode = I2S_MODE_MASTER | I2S_MODE_TX,
|
|
.sample_rate = SAMPLE_RATE,
|
|
.bits_per_sample = SAMPLE_BITS,
|
|
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
|
.communication_format = I2S_COMM_FORMAT_I2S,
|
|
.dma_buf_count = 6,
|
|
.dma_buf_len = 60,
|
|
.use_apll = true,
|
|
.intr_alloc_flags = 0,
|
|
};
|
|
|
|
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL));
|
|
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &pin_config));
|
|
TEST_ESP_OK(i2s_driver_uninstall(I2S_NUM_0));
|
|
int initial_size = esp_get_free_heap_size();
|
|
|
|
uint32_t sample_rate_arr[8] = { 10675, 11025, 16000, 22050, 32000, 44100, 48000, 96000 };
|
|
int bits_per_sample_arr[3] = { 16, 24, 32 };
|
|
|
|
for (int i = 0; i < (sizeof(sample_rate_arr)/sizeof(sample_rate_arr[0])); i++) {
|
|
for (int j = 0; j < (sizeof(bits_per_sample_arr)/sizeof(bits_per_sample_arr[0])); j++) {
|
|
i2s_config.sample_rate = sample_rate_arr[i];
|
|
i2s_config.bits_per_sample = bits_per_sample_arr[j];
|
|
|
|
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL));
|
|
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &pin_config));
|
|
TEST_ASSERT((fabs((i2s_get_clk(I2S_NUM_0) - sample_rate_arr[i]))/(sample_rate_arr[i]))*100 < PERCENT_DIFF);
|
|
TEST_ESP_OK(i2s_driver_uninstall(I2S_NUM_0));
|
|
TEST_ASSERT(initial_size == esp_get_free_heap_size());
|
|
}
|
|
}
|
|
|
|
vTaskDelay(100 / portTICK_PERIOD_MS);
|
|
TEST_ASSERT(initial_size == esp_get_free_heap_size());
|
|
}
|