1717 lines
81 KiB
C
1717 lines
81 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#ifndef __SPI_REG_H__
|
|
#define __SPI_REG_H__
|
|
|
|
|
|
#include "soc.h"
|
|
#define REG_SPI_BASE(i) (DR_REG_SPI1_BASE + (((i)>1) ? (((i)* 0x1000) + 0x20000) : (((~(i)) & 1)* 0x1000 )))
|
|
|
|
#define SPI_CMD_REG(i) (REG_SPI_BASE(i) + 0x0)
|
|
/* SPI_FLASH_READ : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: Read flash enable. Read flash operation will be triggered when
|
|
the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
#define SPI_FLASH_READ (BIT(31))
|
|
#define SPI_FLASH_READ_M (BIT(31))
|
|
#define SPI_FLASH_READ_V 0x1
|
|
#define SPI_FLASH_READ_S 31
|
|
/* SPI_FLASH_WREN : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: Write flash enable. Write enable command will be sent when the
|
|
bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
#define SPI_FLASH_WREN (BIT(30))
|
|
#define SPI_FLASH_WREN_M (BIT(30))
|
|
#define SPI_FLASH_WREN_V 0x1
|
|
#define SPI_FLASH_WREN_S 30
|
|
/* SPI_FLASH_WRDI : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: Write flash disable. Write disable command will be sent when
|
|
the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
#define SPI_FLASH_WRDI (BIT(29))
|
|
#define SPI_FLASH_WRDI_M (BIT(29))
|
|
#define SPI_FLASH_WRDI_V 0x1
|
|
#define SPI_FLASH_WRDI_S 29
|
|
/* SPI_FLASH_RDID : R/W ;bitpos:[28] ;default: 1'b0 ; */
|
|
/*description: Read JEDEC ID . Read ID command will be sent when the bit is
|
|
set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
#define SPI_FLASH_RDID (BIT(28))
|
|
#define SPI_FLASH_RDID_M (BIT(28))
|
|
#define SPI_FLASH_RDID_V 0x1
|
|
#define SPI_FLASH_RDID_S 28
|
|
/* SPI_FLASH_RDSR : R/W ;bitpos:[27] ;default: 1'b0 ; */
|
|
/*description: Read status register-1. Read status operation will be triggered
|
|
when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_FLASH_RDSR (BIT(27))
|
|
#define SPI_FLASH_RDSR_M (BIT(27))
|
|
#define SPI_FLASH_RDSR_V 0x1
|
|
#define SPI_FLASH_RDSR_S 27
|
|
/* SPI_FLASH_WRSR : R/W ;bitpos:[26] ;default: 1'b0 ; */
|
|
/*description: Write status register enable. Write status operation will
|
|
be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_FLASH_WRSR (BIT(26))
|
|
#define SPI_FLASH_WRSR_M (BIT(26))
|
|
#define SPI_FLASH_WRSR_V 0x1
|
|
#define SPI_FLASH_WRSR_S 26
|
|
/* SPI_FLASH_PP : R/W ;bitpos:[25] ;default: 1'b0 ; */
|
|
/*description: Page program enable(1 byte ~256 bytes data to be programmed).
|
|
Page program operation will be triggered when the bit is set. The bit will be cleared once the operation done .1: enable 0: disable.*/
|
|
#define SPI_FLASH_PP (BIT(25))
|
|
#define SPI_FLASH_PP_M (BIT(25))
|
|
#define SPI_FLASH_PP_V 0x1
|
|
#define SPI_FLASH_PP_S 25
|
|
/* SPI_FLASH_SE : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: Sector erase enable(4KB). Sector erase operation will be triggered
|
|
when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_FLASH_SE (BIT(24))
|
|
#define SPI_FLASH_SE_M (BIT(24))
|
|
#define SPI_FLASH_SE_V 0x1
|
|
#define SPI_FLASH_SE_S 24
|
|
/* SPI_FLASH_BE : R/W ;bitpos:[23] ;default: 1'b0 ; */
|
|
/*description: Block erase enable(32KB) . Block erase operation will be triggered
|
|
when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_FLASH_BE (BIT(23))
|
|
#define SPI_FLASH_BE_M (BIT(23))
|
|
#define SPI_FLASH_BE_V 0x1
|
|
#define SPI_FLASH_BE_S 23
|
|
/* SPI_FLASH_CE : R/W ;bitpos:[22] ;default: 1'b0 ; */
|
|
/*description: Chip erase enable. Chip erase operation will be triggered when
|
|
the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_FLASH_CE (BIT(22))
|
|
#define SPI_FLASH_CE_M (BIT(22))
|
|
#define SPI_FLASH_CE_V 0x1
|
|
#define SPI_FLASH_CE_S 22
|
|
/* SPI_FLASH_DP : R/W ;bitpos:[21] ;default: 1'b0 ; */
|
|
/*description: Drive Flash into power down. An operation will be triggered
|
|
when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_FLASH_DP (BIT(21))
|
|
#define SPI_FLASH_DP_M (BIT(21))
|
|
#define SPI_FLASH_DP_V 0x1
|
|
#define SPI_FLASH_DP_S 21
|
|
/* SPI_FLASH_RES : R/W ;bitpos:[20] ;default: 1'b0 ; */
|
|
/*description: This bit combined with reg_resandres bit releases Flash from
|
|
the power-down state or high performance mode and obtains the devices ID. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_FLASH_RES (BIT(20))
|
|
#define SPI_FLASH_RES_M (BIT(20))
|
|
#define SPI_FLASH_RES_V 0x1
|
|
#define SPI_FLASH_RES_S 20
|
|
/* SPI_FLASH_HPM : R/W ;bitpos:[19] ;default: 1'b0 ; */
|
|
/*description: Drive Flash into high performance mode. The bit will be cleared
|
|
once the operation done.1: enable 0: disable.*/
|
|
#define SPI_FLASH_HPM (BIT(19))
|
|
#define SPI_FLASH_HPM_M (BIT(19))
|
|
#define SPI_FLASH_HPM_V 0x1
|
|
#define SPI_FLASH_HPM_S 19
|
|
/* SPI_USR : R/W ;bitpos:[18] ;default: 1'b0 ; */
|
|
/*description: User define command enable. An operation will be triggered when
|
|
the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_USR (BIT(18))
|
|
#define SPI_USR_M (BIT(18))
|
|
#define SPI_USR_V 0x1
|
|
#define SPI_USR_S 18
|
|
/* SPI_FLASH_PES : R/W ;bitpos:[17] ;default: 1'b0 ; */
|
|
/*description: program erase suspend bit program erase suspend operation will
|
|
be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_FLASH_PES (BIT(17))
|
|
#define SPI_FLASH_PES_M (BIT(17))
|
|
#define SPI_FLASH_PES_V 0x1
|
|
#define SPI_FLASH_PES_S 17
|
|
/* SPI_FLASH_PER : R/W ;bitpos:[16] ;default: 1'b0 ; */
|
|
/*description: program erase resume bit program erase suspend operation will
|
|
be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_FLASH_PER (BIT(16))
|
|
#define SPI_FLASH_PER_M (BIT(16))
|
|
#define SPI_FLASH_PER_V 0x1
|
|
#define SPI_FLASH_PER_S 16
|
|
|
|
#define SPI_ADDR_REG(i) (REG_SPI_BASE(i) + 0x4)
|
|
/* SPI_USR_ADDR_VALUE : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
|
|
/*description: [31:8]:address to slave [7:0]:Reserved.*/
|
|
#define SPI_USR_ADDR_VALUE 0xFFFFFFFF
|
|
#define SPI_USR_ADDR_VALUE_M ((SPI_USR_ADDR_VALUE_V)<<(SPI_USR_ADDR_VALUE_S))
|
|
#define SPI_USR_ADDR_VALUE_V 0xFFFFFFFF
|
|
#define SPI_USR_ADDR_VALUE_S 0
|
|
|
|
#define SPI_CTRL_REG(i) (REG_SPI_BASE(i) + 0x8)
|
|
/* SPI_WR_BIT_ORDER : R/W ;bitpos:[26] ;default: 1'b0 ; */
|
|
/*description: In command address write-data (MOSI) phases 1: LSB firs 0: MSB first*/
|
|
#define SPI_WR_BIT_ORDER (BIT(26))
|
|
#define SPI_WR_BIT_ORDER_M (BIT(26))
|
|
#define SPI_WR_BIT_ORDER_V 0x1
|
|
#define SPI_WR_BIT_ORDER_S 26
|
|
/* SPI_RD_BIT_ORDER : R/W ;bitpos:[25] ;default: 1'b0 ; */
|
|
/*description: In read-data (MISO) phase 1: LSB first 0: MSB first*/
|
|
#define SPI_RD_BIT_ORDER (BIT(25))
|
|
#define SPI_RD_BIT_ORDER_M (BIT(25))
|
|
#define SPI_RD_BIT_ORDER_V 0x1
|
|
#define SPI_RD_BIT_ORDER_S 25
|
|
/* SPI_FREAD_QIO : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: In the read operations address phase and read-data phase apply
|
|
4 signals. 1: enable 0: disable.*/
|
|
#define SPI_FREAD_QIO (BIT(24))
|
|
#define SPI_FREAD_QIO_M (BIT(24))
|
|
#define SPI_FREAD_QIO_V 0x1
|
|
#define SPI_FREAD_QIO_S 24
|
|
/* SPI_FREAD_DIO : R/W ;bitpos:[23] ;default: 1'b0 ; */
|
|
/*description: In the read operations address phase and read-data phase apply
|
|
2 signals. 1: enable 0: disable.*/
|
|
#define SPI_FREAD_DIO (BIT(23))
|
|
#define SPI_FREAD_DIO_M (BIT(23))
|
|
#define SPI_FREAD_DIO_V 0x1
|
|
#define SPI_FREAD_DIO_S 23
|
|
/* SPI_WRSR_2B : R/W ;bitpos:[22] ;default: 1'b0 ; */
|
|
/*description: two bytes data will be written to status register when it is
|
|
set. 1: enable 0: disable.*/
|
|
#define SPI_WRSR_2B (BIT(22))
|
|
#define SPI_WRSR_2B_M (BIT(22))
|
|
#define SPI_WRSR_2B_V 0x1
|
|
#define SPI_WRSR_2B_S 22
|
|
/* SPI_WP_REG : R/W ;bitpos:[21] ;default: 1'b1 ; */
|
|
/*description: Write protect signal output when SPI is idle. 1: output high 0: output low.*/
|
|
#define SPI_WP_REG (BIT(21))
|
|
#define SPI_WP_REG_M (BIT(21))
|
|
#define SPI_WP_REG_V 0x1
|
|
#define SPI_WP_REG_S 21
|
|
/* SPI_FREAD_QUAD : R/W ;bitpos:[20] ;default: 1'b0 ; */
|
|
/*description: In the read operations read-data phase apply 4 signals. 1: enable 0: disable.*/
|
|
#define SPI_FREAD_QUAD (BIT(20))
|
|
#define SPI_FREAD_QUAD_M (BIT(20))
|
|
#define SPI_FREAD_QUAD_V 0x1
|
|
#define SPI_FREAD_QUAD_S 20
|
|
/* SPI_RESANDRES : R/W ;bitpos:[15] ;default: 1'b1 ; */
|
|
/*description: The Device ID is read out to SPI_RD_STATUS register, this bit
|
|
combine with spi_flash_res bit. 1: enable 0: disable.*/
|
|
#define SPI_RESANDRES (BIT(15))
|
|
#define SPI_RESANDRES_M (BIT(15))
|
|
#define SPI_RESANDRES_V 0x1
|
|
#define SPI_RESANDRES_S 15
|
|
/* SPI_FREAD_DUAL : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
/*description: In the read operations read-data phase apply 2 signals. 1: enable 0: disable.*/
|
|
#define SPI_FREAD_DUAL (BIT(14))
|
|
#define SPI_FREAD_DUAL_M (BIT(14))
|
|
#define SPI_FREAD_DUAL_V 0x1
|
|
#define SPI_FREAD_DUAL_S 14
|
|
/* SPI_FASTRD_MODE : R/W ;bitpos:[13] ;default: 1'b1 ; */
|
|
/*description: This bit enable the bits: spi_fread_qio spi_fread_dio spi_fread_qout
|
|
and spi_fread_dout. 1: enable 0: disable.*/
|
|
#define SPI_FASTRD_MODE (BIT(13))
|
|
#define SPI_FASTRD_MODE_M (BIT(13))
|
|
#define SPI_FASTRD_MODE_V 0x1
|
|
#define SPI_FASTRD_MODE_S 13
|
|
/* SPI_WAIT_FLASH_IDLE_EN : R/W ;bitpos:[12] ;default: 1'b0 ; */
|
|
/*description: wait flash idle when program flash or erase flash. 1: enable 0: disable.*/
|
|
#define SPI_WAIT_FLASH_IDLE_EN (BIT(12))
|
|
#define SPI_WAIT_FLASH_IDLE_EN_M (BIT(12))
|
|
#define SPI_WAIT_FLASH_IDLE_EN_V 0x1
|
|
#define SPI_WAIT_FLASH_IDLE_EN_S 12
|
|
/* SPI_TX_CRC_EN : R/W ;bitpos:[11] ;default: 1'b0 ; */
|
|
/*description: For SPI1 enable crc32 when writing encrypted data to flash.
|
|
1: enable 0:disable*/
|
|
#define SPI_TX_CRC_EN (BIT(11))
|
|
#define SPI_TX_CRC_EN_M (BIT(11))
|
|
#define SPI_TX_CRC_EN_V 0x1
|
|
#define SPI_TX_CRC_EN_S 11
|
|
/* SPI_FCS_CRC_EN : R/W ;bitpos:[10] ;default: 1'b1 ; */
|
|
/*description: For SPI1 initialize crc32 module before writing encrypted data
|
|
to flash. Active low.*/
|
|
#define SPI_FCS_CRC_EN (BIT(10))
|
|
#define SPI_FCS_CRC_EN_M (BIT(10))
|
|
#define SPI_FCS_CRC_EN_V 0x1
|
|
#define SPI_FCS_CRC_EN_S 10
|
|
|
|
#define SPI_CTRL1_REG(i) (REG_SPI_BASE(i) + 0xC)
|
|
/* SPI_CS_HOLD_DELAY : R/W ;bitpos:[31:28] ;default: 4'h5 ; */
|
|
/*description: SPI cs signal is delayed by spi clock cycles*/
|
|
#define SPI_CS_HOLD_DELAY 0x0000000F
|
|
#define SPI_CS_HOLD_DELAY_M ((SPI_CS_HOLD_DELAY_V)<<(SPI_CS_HOLD_DELAY_S))
|
|
#define SPI_CS_HOLD_DELAY_V 0xF
|
|
#define SPI_CS_HOLD_DELAY_S 28
|
|
/* SPI_CS_HOLD_DELAY_RES : R/W ;bitpos:[27:16] ;default: 12'hfff ; */
|
|
/*description: Delay cycles of resume Flash when resume Flash is enable by spi clock.*/
|
|
#define SPI_CS_HOLD_DELAY_RES 0x00000FFF
|
|
#define SPI_CS_HOLD_DELAY_RES_M ((SPI_CS_HOLD_DELAY_RES_V)<<(SPI_CS_HOLD_DELAY_RES_S))
|
|
#define SPI_CS_HOLD_DELAY_RES_V 0xFFF
|
|
#define SPI_CS_HOLD_DELAY_RES_S 16
|
|
|
|
#define SPI_RD_STATUS_REG(i) (REG_SPI_BASE(i) + 0x10)
|
|
/* SPI_STATUS_EXT : R/W ;bitpos:[31:24] ;default: 8'h00 ; */
|
|
/*description: In the slave mode,it is the status for master to read out.*/
|
|
#define SPI_STATUS_EXT 0x000000FF
|
|
#define SPI_STATUS_EXT_M ((SPI_STATUS_EXT_V)<<(SPI_STATUS_EXT_S))
|
|
#define SPI_STATUS_EXT_V 0xFF
|
|
#define SPI_STATUS_EXT_S 24
|
|
/* SPI_WB_MODE : R/W ;bitpos:[23:16] ;default: 8'h00 ; */
|
|
/*description: Mode bits in the flash fast read mode, it is combined with spi_fastrd_mode bit.*/
|
|
#define SPI_WB_MODE 0x000000FF
|
|
#define SPI_WB_MODE_M ((SPI_WB_MODE_V)<<(SPI_WB_MODE_S))
|
|
#define SPI_WB_MODE_V 0xFF
|
|
#define SPI_WB_MODE_S 16
|
|
/* SPI_STATUS : R/W ;bitpos:[15:0] ;default: 16'b0 ; */
|
|
/*description: In the slave mode, it is the status for master to read out.*/
|
|
#define SPI_STATUS 0x0000FFFF
|
|
#define SPI_STATUS_M ((SPI_STATUS_V)<<(SPI_STATUS_S))
|
|
#define SPI_STATUS_V 0xFFFF
|
|
#define SPI_STATUS_S 0
|
|
|
|
#define SPI_CTRL2_REG(i) (REG_SPI_BASE(i) + 0x14)
|
|
/* SPI_CS_DELAY_NUM : R/W ;bitpos:[31:28] ;default: 4'h0 ; */
|
|
/*description: spi_cs signal is delayed by system clock cycles*/
|
|
#define SPI_CS_DELAY_NUM 0x0000000F
|
|
#define SPI_CS_DELAY_NUM_M ((SPI_CS_DELAY_NUM_V)<<(SPI_CS_DELAY_NUM_S))
|
|
#define SPI_CS_DELAY_NUM_V 0xF
|
|
#define SPI_CS_DELAY_NUM_S 28
|
|
/* SPI_CS_DELAY_MODE : R/W ;bitpos:[27:26] ;default: 2'h0 ; */
|
|
/*description: spi_cs signal is delayed by spi_clk . 0: zero 1: if spi_ck_out_edge
|
|
or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle*/
|
|
#define SPI_CS_DELAY_MODE 0x00000003
|
|
#define SPI_CS_DELAY_MODE_M ((SPI_CS_DELAY_MODE_V)<<(SPI_CS_DELAY_MODE_S))
|
|
#define SPI_CS_DELAY_MODE_V 0x3
|
|
#define SPI_CS_DELAY_MODE_S 26
|
|
/* SPI_MOSI_DELAY_NUM : R/W ;bitpos:[25:23] ;default: 3'h0 ; */
|
|
/*description: MOSI signals are delayed by system clock cycles*/
|
|
#define SPI_MOSI_DELAY_NUM 0x00000007
|
|
#define SPI_MOSI_DELAY_NUM_M ((SPI_MOSI_DELAY_NUM_V)<<(SPI_MOSI_DELAY_NUM_S))
|
|
#define SPI_MOSI_DELAY_NUM_V 0x7
|
|
#define SPI_MOSI_DELAY_NUM_S 23
|
|
/* SPI_MOSI_DELAY_MODE : R/W ;bitpos:[22:21] ;default: 2'h0 ; */
|
|
/*description: MOSI signals are delayed by spi_clk. 0: zero 1: if spi_ck_out_edge
|
|
or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle*/
|
|
#define SPI_MOSI_DELAY_MODE 0x00000003
|
|
#define SPI_MOSI_DELAY_MODE_M ((SPI_MOSI_DELAY_MODE_V)<<(SPI_MOSI_DELAY_MODE_S))
|
|
#define SPI_MOSI_DELAY_MODE_V 0x3
|
|
#define SPI_MOSI_DELAY_MODE_S 21
|
|
/* SPI_MISO_DELAY_NUM : R/W ;bitpos:[20:18] ;default: 3'h0 ; */
|
|
/*description: MISO signals are delayed by system clock cycles*/
|
|
#define SPI_MISO_DELAY_NUM 0x00000007
|
|
#define SPI_MISO_DELAY_NUM_M ((SPI_MISO_DELAY_NUM_V)<<(SPI_MISO_DELAY_NUM_S))
|
|
#define SPI_MISO_DELAY_NUM_V 0x7
|
|
#define SPI_MISO_DELAY_NUM_S 18
|
|
/* SPI_MISO_DELAY_MODE : R/W ;bitpos:[17:16] ;default: 2'h0 ; */
|
|
/*description: MISO signals are delayed by spi_clk. 0: zero 1: if spi_ck_out_edge
|
|
or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle*/
|
|
#define SPI_MISO_DELAY_MODE 0x00000003
|
|
#define SPI_MISO_DELAY_MODE_M ((SPI_MISO_DELAY_MODE_V)<<(SPI_MISO_DELAY_MODE_S))
|
|
#define SPI_MISO_DELAY_MODE_V 0x3
|
|
#define SPI_MISO_DELAY_MODE_S 16
|
|
/* SPI_CK_OUT_HIGH_MODE : R/W ;bitpos:[15:12] ;default: 4'h0 ; */
|
|
/*description: modify spi clock duty ratio when the value is lager than 8,
|
|
the bits are combined with spi_clkcnt_N bits and spi_clkcnt_H bits.*/
|
|
#define SPI_CK_OUT_HIGH_MODE 0x0000000F
|
|
#define SPI_CK_OUT_HIGH_MODE_M ((SPI_CK_OUT_HIGH_MODE_V)<<(SPI_CK_OUT_HIGH_MODE_S))
|
|
#define SPI_CK_OUT_HIGH_MODE_V 0xF
|
|
#define SPI_CK_OUT_HIGH_MODE_S 12
|
|
/* SPI_CK_OUT_LOW_MODE : R/W ;bitpos:[11:8] ;default: 4'h0 ; */
|
|
/*description: modify spi clock duty ratio when the value is lager than 8,
|
|
the bits are combined with spi_clkcnt_N bits and spi_clkcnt_L bits.*/
|
|
#define SPI_CK_OUT_LOW_MODE 0x0000000F
|
|
#define SPI_CK_OUT_LOW_MODE_M ((SPI_CK_OUT_LOW_MODE_V)<<(SPI_CK_OUT_LOW_MODE_S))
|
|
#define SPI_CK_OUT_LOW_MODE_V 0xF
|
|
#define SPI_CK_OUT_LOW_MODE_S 8
|
|
/* SPI_HOLD_TIME : R/W ;bitpos:[7:4] ;default: 4'h1 ; */
|
|
/*description: delay cycles of cs pin by spi clock, this bits combined with spi_cs_hold bit.*/
|
|
#define SPI_HOLD_TIME 0x0000000F
|
|
#define SPI_HOLD_TIME_M ((SPI_HOLD_TIME_V)<<(SPI_HOLD_TIME_S))
|
|
#define SPI_HOLD_TIME_V 0xF
|
|
#define SPI_HOLD_TIME_S 4
|
|
/* SPI_SETUP_TIME : R/W ;bitpos:[3:0] ;default: 4'h1 ; */
|
|
/*description: (cycles-1) of ¡°prepare¡± phase by spi clock, this bits combined
|
|
with spi_cs_setup bit.*/
|
|
#define SPI_SETUP_TIME 0x0000000F
|
|
#define SPI_SETUP_TIME_M ((SPI_SETUP_TIME_V)<<(SPI_SETUP_TIME_S))
|
|
#define SPI_SETUP_TIME_V 0xF
|
|
#define SPI_SETUP_TIME_S 0
|
|
|
|
#define SPI_CLOCK_REG(i) (REG_SPI_BASE(i) + 0x18)
|
|
/* SPI_CLK_EQU_SYSCLK : R/W ;bitpos:[31] ;default: 1'b1 ; */
|
|
/*description: In the master mode 1: spi_clk is eqaul to system 0: spi_clk is
|
|
divided from system clock.*/
|
|
#define SPI_CLK_EQU_SYSCLK (BIT(31))
|
|
#define SPI_CLK_EQU_SYSCLK_M (BIT(31))
|
|
#define SPI_CLK_EQU_SYSCLK_V 0x1
|
|
#define SPI_CLK_EQU_SYSCLK_S 31
|
|
/* SPI_CLKDIV_PRE : R/W ;bitpos:[30:18] ;default: 13'b0 ; */
|
|
/*description: In the master mode it is pre-divider of spi_clk.*/
|
|
#define SPI_CLKDIV_PRE 0x00001FFF
|
|
#define SPI_CLKDIV_PRE_M ((SPI_CLKDIV_PRE_V)<<(SPI_CLKDIV_PRE_S))
|
|
#define SPI_CLKDIV_PRE_V 0x1FFF
|
|
#define SPI_CLKDIV_PRE_S 18
|
|
/* SPI_CLKCNT_N : R/W ;bitpos:[17:12] ;default: 6'h3 ; */
|
|
/*description: In the master mode it is the divider of spi_clk. So spi_clk frequency
|
|
is system/(spi_clkdiv_pre+1)/(spi_clkcnt_N+1)*/
|
|
#define SPI_CLKCNT_N 0x0000003F
|
|
#define SPI_CLKCNT_N_M ((SPI_CLKCNT_N_V)<<(SPI_CLKCNT_N_S))
|
|
#define SPI_CLKCNT_N_V 0x3F
|
|
#define SPI_CLKCNT_N_S 12
|
|
/* SPI_CLKCNT_H : R/W ;bitpos:[11:6] ;default: 6'h1 ; */
|
|
/*description: In the master mode it must be floor((spi_clkcnt_N+1)/2-1). In
|
|
the slave mode it must be 0.*/
|
|
#define SPI_CLKCNT_H 0x0000003F
|
|
#define SPI_CLKCNT_H_M ((SPI_CLKCNT_H_V)<<(SPI_CLKCNT_H_S))
|
|
#define SPI_CLKCNT_H_V 0x3F
|
|
#define SPI_CLKCNT_H_S 6
|
|
/* SPI_CLKCNT_L : R/W ;bitpos:[5:0] ;default: 6'h3 ; */
|
|
/*description: In the master mode it must be equal to spi_clkcnt_N. In the slave
|
|
mode it must be 0.*/
|
|
#define SPI_CLKCNT_L 0x0000003F
|
|
#define SPI_CLKCNT_L_M ((SPI_CLKCNT_L_V)<<(SPI_CLKCNT_L_S))
|
|
#define SPI_CLKCNT_L_V 0x3F
|
|
#define SPI_CLKCNT_L_S 0
|
|
|
|
#define SPI_USER_REG(i) (REG_SPI_BASE(i) + 0x1C)
|
|
/* SPI_USR_COMMAND : R/W ;bitpos:[31] ;default: 1'b1 ; */
|
|
/*description: This bit enable the command phase of an operation.*/
|
|
#define SPI_USR_COMMAND (BIT(31))
|
|
#define SPI_USR_COMMAND_M (BIT(31))
|
|
#define SPI_USR_COMMAND_V 0x1
|
|
#define SPI_USR_COMMAND_S 31
|
|
/* SPI_USR_ADDR : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: This bit enable the address phase of an operation.*/
|
|
#define SPI_USR_ADDR (BIT(30))
|
|
#define SPI_USR_ADDR_M (BIT(30))
|
|
#define SPI_USR_ADDR_V 0x1
|
|
#define SPI_USR_ADDR_S 30
|
|
/* SPI_USR_DUMMY : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: This bit enable the dummy phase of an operation.*/
|
|
#define SPI_USR_DUMMY (BIT(29))
|
|
#define SPI_USR_DUMMY_M (BIT(29))
|
|
#define SPI_USR_DUMMY_V 0x1
|
|
#define SPI_USR_DUMMY_S 29
|
|
/* SPI_USR_MISO : R/W ;bitpos:[28] ;default: 1'b0 ; */
|
|
/*description: This bit enable the read-data phase of an operation.*/
|
|
#define SPI_USR_MISO (BIT(28))
|
|
#define SPI_USR_MISO_M (BIT(28))
|
|
#define SPI_USR_MISO_V 0x1
|
|
#define SPI_USR_MISO_S 28
|
|
/* SPI_USR_MOSI : R/W ;bitpos:[27] ;default: 1'b0 ; */
|
|
/*description: This bit enable the write-data phase of an operation.*/
|
|
#define SPI_USR_MOSI (BIT(27))
|
|
#define SPI_USR_MOSI_M (BIT(27))
|
|
#define SPI_USR_MOSI_V 0x1
|
|
#define SPI_USR_MOSI_S 27
|
|
/* SPI_USR_DUMMY_IDLE : R/W ;bitpos:[26] ;default: 1'b0 ; */
|
|
/*description: spi clock is disable in dummy phase when the bit is enable.*/
|
|
#define SPI_USR_DUMMY_IDLE (BIT(26))
|
|
#define SPI_USR_DUMMY_IDLE_M (BIT(26))
|
|
#define SPI_USR_DUMMY_IDLE_V 0x1
|
|
#define SPI_USR_DUMMY_IDLE_S 26
|
|
/* SPI_USR_MOSI_HIGHPART : R/W ;bitpos:[25] ;default: 1'b0 ; */
|
|
/*description: write-data phase only access to high-part of the buffer spi_w8~spi_w15.
|
|
1: enable 0: disable.*/
|
|
#define SPI_USR_MOSI_HIGHPART (BIT(25))
|
|
#define SPI_USR_MOSI_HIGHPART_M (BIT(25))
|
|
#define SPI_USR_MOSI_HIGHPART_V 0x1
|
|
#define SPI_USR_MOSI_HIGHPART_S 25
|
|
/* SPI_USR_MISO_HIGHPART : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: read-data phase only access to high-part of the buffer spi_w8~spi_w15.
|
|
1: enable 0: disable.*/
|
|
#define SPI_USR_MISO_HIGHPART (BIT(24))
|
|
#define SPI_USR_MISO_HIGHPART_M (BIT(24))
|
|
#define SPI_USR_MISO_HIGHPART_V 0x1
|
|
#define SPI_USR_MISO_HIGHPART_S 24
|
|
/* SPI_USR_PREP_HOLD : R/W ;bitpos:[23] ;default: 1'b0 ; */
|
|
/*description: spi is hold at prepare state the bit combined with spi_usr_hold_pol bit.*/
|
|
#define SPI_USR_PREP_HOLD (BIT(23))
|
|
#define SPI_USR_PREP_HOLD_M (BIT(23))
|
|
#define SPI_USR_PREP_HOLD_V 0x1
|
|
#define SPI_USR_PREP_HOLD_S 23
|
|
/* SPI_USR_CMD_HOLD : R/W ;bitpos:[22] ;default: 1'b0 ; */
|
|
/*description: spi is hold at command state the bit combined with spi_usr_hold_pol bit.*/
|
|
#define SPI_USR_CMD_HOLD (BIT(22))
|
|
#define SPI_USR_CMD_HOLD_M (BIT(22))
|
|
#define SPI_USR_CMD_HOLD_V 0x1
|
|
#define SPI_USR_CMD_HOLD_S 22
|
|
/* SPI_USR_ADDR_HOLD : R/W ;bitpos:[21] ;default: 1'b0 ; */
|
|
/*description: spi is hold at address state the bit combined with spi_usr_hold_pol bit.*/
|
|
#define SPI_USR_ADDR_HOLD (BIT(21))
|
|
#define SPI_USR_ADDR_HOLD_M (BIT(21))
|
|
#define SPI_USR_ADDR_HOLD_V 0x1
|
|
#define SPI_USR_ADDR_HOLD_S 21
|
|
/* SPI_USR_DUMMY_HOLD : R/W ;bitpos:[20] ;default: 1'b0 ; */
|
|
/*description: spi is hold at dummy state the bit combined with spi_usr_hold_pol bit.*/
|
|
#define SPI_USR_DUMMY_HOLD (BIT(20))
|
|
#define SPI_USR_DUMMY_HOLD_M (BIT(20))
|
|
#define SPI_USR_DUMMY_HOLD_V 0x1
|
|
#define SPI_USR_DUMMY_HOLD_S 20
|
|
/* SPI_USR_DIN_HOLD : R/W ;bitpos:[19] ;default: 1'b0 ; */
|
|
/*description: spi is hold at data in state the bit combined with spi_usr_hold_pol bit.*/
|
|
#define SPI_USR_DIN_HOLD (BIT(19))
|
|
#define SPI_USR_DIN_HOLD_M (BIT(19))
|
|
#define SPI_USR_DIN_HOLD_V 0x1
|
|
#define SPI_USR_DIN_HOLD_S 19
|
|
/* SPI_USR_DOUT_HOLD : R/W ;bitpos:[18] ;default: 1'b0 ; */
|
|
/*description: spi is hold at data out state the bit combined with spi_usr_hold_pol bit.*/
|
|
#define SPI_USR_DOUT_HOLD (BIT(18))
|
|
#define SPI_USR_DOUT_HOLD_M (BIT(18))
|
|
#define SPI_USR_DOUT_HOLD_V 0x1
|
|
#define SPI_USR_DOUT_HOLD_S 18
|
|
/* SPI_USR_HOLD_POL : R/W ;bitpos:[17] ;default: 1'b0 ; */
|
|
/*description: It is combined with hold bits to set the polarity of spi hold
|
|
line 1: spi will be held when spi hold line is high 0: spi will be held when spi hold line is low*/
|
|
#define SPI_USR_HOLD_POL (BIT(17))
|
|
#define SPI_USR_HOLD_POL_M (BIT(17))
|
|
#define SPI_USR_HOLD_POL_V 0x1
|
|
#define SPI_USR_HOLD_POL_S 17
|
|
/* SPI_SIO : R/W ;bitpos:[16] ;default: 1'b0 ; */
|
|
/*description: Set the bit to enable 3-line half duplex communication mosi
|
|
and miso signals share the same pin. 1: enable 0: disable.*/
|
|
#define SPI_SIO (BIT(16))
|
|
#define SPI_SIO_M (BIT(16))
|
|
#define SPI_SIO_V 0x1
|
|
#define SPI_SIO_S 16
|
|
/* SPI_FWRITE_QIO : R/W ;bitpos:[15] ;default: 1'b0 ; */
|
|
/*description: In the write operations address phase and read-data phase apply 4 signals.*/
|
|
#define SPI_FWRITE_QIO (BIT(15))
|
|
#define SPI_FWRITE_QIO_M (BIT(15))
|
|
#define SPI_FWRITE_QIO_V 0x1
|
|
#define SPI_FWRITE_QIO_S 15
|
|
/* SPI_FWRITE_DIO : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
/*description: In the write operations address phase and read-data phase apply 2 signals.*/
|
|
#define SPI_FWRITE_DIO (BIT(14))
|
|
#define SPI_FWRITE_DIO_M (BIT(14))
|
|
#define SPI_FWRITE_DIO_V 0x1
|
|
#define SPI_FWRITE_DIO_S 14
|
|
/* SPI_FWRITE_QUAD : R/W ;bitpos:[13] ;default: 1'b0 ; */
|
|
/*description: In the write operations read-data phase apply 4 signals*/
|
|
#define SPI_FWRITE_QUAD (BIT(13))
|
|
#define SPI_FWRITE_QUAD_M (BIT(13))
|
|
#define SPI_FWRITE_QUAD_V 0x1
|
|
#define SPI_FWRITE_QUAD_S 13
|
|
/* SPI_FWRITE_DUAL : R/W ;bitpos:[12] ;default: 1'b0 ; */
|
|
/*description: In the write operations read-data phase apply 2 signals*/
|
|
#define SPI_FWRITE_DUAL (BIT(12))
|
|
#define SPI_FWRITE_DUAL_M (BIT(12))
|
|
#define SPI_FWRITE_DUAL_V 0x1
|
|
#define SPI_FWRITE_DUAL_S 12
|
|
/* SPI_WR_BYTE_ORDER : R/W ;bitpos:[11] ;default: 1'b0 ; */
|
|
/*description: In command address write-data (MOSI) phases 1: big-endian 0: litte_endian*/
|
|
#define SPI_WR_BYTE_ORDER (BIT(11))
|
|
#define SPI_WR_BYTE_ORDER_M (BIT(11))
|
|
#define SPI_WR_BYTE_ORDER_V 0x1
|
|
#define SPI_WR_BYTE_ORDER_S 11
|
|
/* SPI_RD_BYTE_ORDER : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
/*description: In read-data (MISO) phase 1: big-endian 0: little_endian*/
|
|
#define SPI_RD_BYTE_ORDER (BIT(10))
|
|
#define SPI_RD_BYTE_ORDER_M (BIT(10))
|
|
#define SPI_RD_BYTE_ORDER_V 0x1
|
|
#define SPI_RD_BYTE_ORDER_S 10
|
|
/* SPI_CK_OUT_EDGE : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: the bit combined with spi_mosi_delay_mode bits to set mosi signal delay mode.*/
|
|
#define SPI_CK_OUT_EDGE (BIT(7))
|
|
#define SPI_CK_OUT_EDGE_M (BIT(7))
|
|
#define SPI_CK_OUT_EDGE_V 0x1
|
|
#define SPI_CK_OUT_EDGE_S 7
|
|
/* SPI_CK_I_EDGE : R/W ;bitpos:[6] ;default: 1'b1 ; */
|
|
/*description: In the slave mode the bit is same as spi_ck_out_edge in master
|
|
mode. It is combined with spi_miso_delay_mode bits.*/
|
|
#define SPI_CK_I_EDGE (BIT(6))
|
|
#define SPI_CK_I_EDGE_M (BIT(6))
|
|
#define SPI_CK_I_EDGE_V 0x1
|
|
#define SPI_CK_I_EDGE_S 6
|
|
/* SPI_CS_SETUP : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: spi cs is enable when spi is in ¡°prepare¡± phase. 1: enable 0: disable.*/
|
|
#define SPI_CS_SETUP (BIT(5))
|
|
#define SPI_CS_SETUP_M (BIT(5))
|
|
#define SPI_CS_SETUP_V 0x1
|
|
#define SPI_CS_SETUP_S 5
|
|
/* SPI_CS_HOLD : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: spi cs keep low when spi is in ¡°done¡± phase. 1: enable 0: disable.*/
|
|
#define SPI_CS_HOLD (BIT(4))
|
|
#define SPI_CS_HOLD_M (BIT(4))
|
|
#define SPI_CS_HOLD_V 0x1
|
|
#define SPI_CS_HOLD_S 4
|
|
/* SPI_DOUTDIN : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: Set the bit to enable full duplex communication. 1: enable 0: disable.*/
|
|
#define SPI_DOUTDIN (BIT(0))
|
|
#define SPI_DOUTDIN_M (BIT(0))
|
|
#define SPI_DOUTDIN_V 0x1
|
|
#define SPI_DOUTDIN_S 0
|
|
|
|
#define SPI_USER1_REG(i) (REG_SPI_BASE(i) + 0x20)
|
|
/* SPI_USR_ADDR_BITLEN : RO ;bitpos:[31:26] ;default: 6'd23 ; */
|
|
/*description: The length in bits of address phase. The register value shall be (bit_num-1).*/
|
|
#define SPI_USR_ADDR_BITLEN 0x0000003F
|
|
#define SPI_USR_ADDR_BITLEN_M ((SPI_USR_ADDR_BITLEN_V)<<(SPI_USR_ADDR_BITLEN_S))
|
|
#define SPI_USR_ADDR_BITLEN_V 0x3F
|
|
#define SPI_USR_ADDR_BITLEN_S 26
|
|
/* SPI_USR_DUMMY_CYCLELEN : R/W ;bitpos:[7:0] ;default: 8'd7 ; */
|
|
/*description: The length in spi_clk cycles of dummy phase. The register value
|
|
shall be (cycle_num-1).*/
|
|
#define SPI_USR_DUMMY_CYCLELEN 0x000000FF
|
|
#define SPI_USR_DUMMY_CYCLELEN_M ((SPI_USR_DUMMY_CYCLELEN_V)<<(SPI_USR_DUMMY_CYCLELEN_S))
|
|
#define SPI_USR_DUMMY_CYCLELEN_V 0xFF
|
|
#define SPI_USR_DUMMY_CYCLELEN_S 0
|
|
|
|
#define SPI_USER2_REG(i) (REG_SPI_BASE(i) + 0x24)
|
|
/* SPI_USR_COMMAND_BITLEN : R/W ;bitpos:[31:28] ;default: 4'd7 ; */
|
|
/*description: The length in bits of command phase. The register value shall be (bit_num-1)*/
|
|
#define SPI_USR_COMMAND_BITLEN 0x0000000F
|
|
#define SPI_USR_COMMAND_BITLEN_M ((SPI_USR_COMMAND_BITLEN_V)<<(SPI_USR_COMMAND_BITLEN_S))
|
|
#define SPI_USR_COMMAND_BITLEN_V 0xF
|
|
#define SPI_USR_COMMAND_BITLEN_S 28
|
|
/* SPI_USR_COMMAND_VALUE : R/W ;bitpos:[15:0] ;default: 16'b0 ; */
|
|
/*description: The value of command.*/
|
|
#define SPI_USR_COMMAND_VALUE 0x0000FFFF
|
|
#define SPI_USR_COMMAND_VALUE_M ((SPI_USR_COMMAND_VALUE_V)<<(SPI_USR_COMMAND_VALUE_S))
|
|
#define SPI_USR_COMMAND_VALUE_V 0xFFFF
|
|
#define SPI_USR_COMMAND_VALUE_S 0
|
|
|
|
#define SPI_MOSI_DLEN_REG(i) (REG_SPI_BASE(i) + 0x28)
|
|
/* SPI_USR_MOSI_DBITLEN : R/W ;bitpos:[23:0] ;default: 24'h0 ; */
|
|
/*description: The length in bits of write-data. The register value shall be (bit_num-1).*/
|
|
#define SPI_USR_MOSI_DBITLEN 0x00FFFFFF
|
|
#define SPI_USR_MOSI_DBITLEN_M ((SPI_USR_MOSI_DBITLEN_V)<<(SPI_USR_MOSI_DBITLEN_S))
|
|
#define SPI_USR_MOSI_DBITLEN_V 0xFFFFFF
|
|
#define SPI_USR_MOSI_DBITLEN_S 0
|
|
|
|
#define SPI_MISO_DLEN_REG(i) (REG_SPI_BASE(i) + 0x2C)
|
|
/* SPI_USR_MISO_DBITLEN : R/W ;bitpos:[23:0] ;default: 24'h0 ; */
|
|
/*description: The length in bits of read-data. The register value shall be (bit_num-1).*/
|
|
#define SPI_USR_MISO_DBITLEN 0x00FFFFFF
|
|
#define SPI_USR_MISO_DBITLEN_M ((SPI_USR_MISO_DBITLEN_V)<<(SPI_USR_MISO_DBITLEN_S))
|
|
#define SPI_USR_MISO_DBITLEN_V 0xFFFFFF
|
|
#define SPI_USR_MISO_DBITLEN_S 0
|
|
|
|
#define SPI_SLV_WR_STATUS_REG(i) (REG_SPI_BASE(i) + 0x30)
|
|
/* SPI_SLV_WR_ST : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: In the slave mode this register are the status register for the
|
|
master to write into. In the master mode this register are the higher 32bits in the 64 bits address condition.*/
|
|
#define SPI_SLV_WR_ST 0xFFFFFFFF
|
|
#define SPI_SLV_WR_ST_M ((SPI_SLV_WR_ST_V)<<(SPI_SLV_WR_ST_S))
|
|
#define SPI_SLV_WR_ST_V 0xFFFFFFFF
|
|
#define SPI_SLV_WR_ST_S 0
|
|
|
|
#define SPI_PIN_REG(i) (REG_SPI_BASE(i) + 0x34)
|
|
/* SPI_CS_KEEP_ACTIVE : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: spi cs line keep low when the bit is set.*/
|
|
#define SPI_CS_KEEP_ACTIVE (BIT(30))
|
|
#define SPI_CS_KEEP_ACTIVE_M (BIT(30))
|
|
#define SPI_CS_KEEP_ACTIVE_V 0x1
|
|
#define SPI_CS_KEEP_ACTIVE_S 30
|
|
/* SPI_CK_IDLE_EDGE : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: 1: spi clk line is high when idle 0: spi clk line is low when idle*/
|
|
#define SPI_CK_IDLE_EDGE (BIT(29))
|
|
#define SPI_CK_IDLE_EDGE_M (BIT(29))
|
|
#define SPI_CK_IDLE_EDGE_V 0x1
|
|
#define SPI_CK_IDLE_EDGE_S 29
|
|
/* SPI_MASTER_CK_SEL : R/W ;bitpos:[15:11] ;default: 5'b0 ; */
|
|
/*description: In the master mode spi cs line is enable as spi clk it is combined
|
|
with spi_cs0_dis spi_cs1_dis spi_cs2_dis.*/
|
|
#define SPI_MASTER_CK_SEL 0x0000001F
|
|
#define SPI_MASTER_CK_SEL_M ((SPI_MASTER_CK_SEL_V)<<(SPI_MASTER_CK_SEL_S))
|
|
#define SPI_MASTER_CK_SEL_V 0x1F
|
|
#define SPI_MASTER_CK_SEL_S 11
|
|
/* SPI_MASTER_CS_POL : R/W ;bitpos:[10:6] ;default: 5'b0 ; */
|
|
/*description: In the master mode the bits are the polarity of spi cs line
|
|
the value is equivalent to spi_cs ^ spi_master_cs_pol.*/
|
|
#define SPI_MASTER_CS_POL 0x0000001F
|
|
#define SPI_MASTER_CS_POL_M ((SPI_MASTER_CS_POL_V)<<(SPI_MASTER_CS_POL_S))
|
|
#define SPI_MASTER_CS_POL_V 0x1F
|
|
#define SPI_MASTER_CS_POL_S 6
|
|
/* SPI_CK_DIS : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: 1: spi clk out disable 0: spi clk out enable*/
|
|
#define SPI_CK_DIS (BIT(5))
|
|
#define SPI_CK_DIS_M (BIT(5))
|
|
#define SPI_CK_DIS_V 0x1
|
|
#define SPI_CK_DIS_S 5
|
|
/* SPI_CS2_DIS : R/W ;bitpos:[2] ;default: 1'b1 ; */
|
|
/*description: SPI CS2 pin enable, 1: disable CS2, 0: spi_cs2 signal is from/to CS2 pin*/
|
|
#define SPI_CS2_DIS (BIT(2))
|
|
#define SPI_CS2_DIS_M (BIT(2))
|
|
#define SPI_CS2_DIS_V 0x1
|
|
#define SPI_CS2_DIS_S 2
|
|
/* SPI_CS1_DIS : R/W ;bitpos:[1] ;default: 1'b1 ; */
|
|
/*description: SPI CS1 pin enable, 1: disable CS1, 0: spi_cs1 signal is from/to CS1 pin*/
|
|
#define SPI_CS1_DIS (BIT(1))
|
|
#define SPI_CS1_DIS_M (BIT(1))
|
|
#define SPI_CS1_DIS_V 0x1
|
|
#define SPI_CS1_DIS_S 1
|
|
/* SPI_CS0_DIS : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: SPI CS0 pin enable, 1: disable CS0, 0: spi_cs0 signal is from/to CS0 pin*/
|
|
#define SPI_CS0_DIS (BIT(0))
|
|
#define SPI_CS0_DIS_M (BIT(0))
|
|
#define SPI_CS0_DIS_V 0x1
|
|
#define SPI_CS0_DIS_S 0
|
|
|
|
#define SPI_SLAVE_REG(i) (REG_SPI_BASE(i) + 0x38)
|
|
/* SPI_SYNC_RESET : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: Software reset enable, reset the spi clock line cs line and data lines.*/
|
|
#define SPI_SYNC_RESET (BIT(31))
|
|
#define SPI_SYNC_RESET_M (BIT(31))
|
|
#define SPI_SYNC_RESET_V 0x1
|
|
#define SPI_SYNC_RESET_S 31
|
|
/* SPI_SLAVE_MODE : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: 1: slave mode 0: master mode.*/
|
|
#define SPI_SLAVE_MODE (BIT(30))
|
|
#define SPI_SLAVE_MODE_M (BIT(30))
|
|
#define SPI_SLAVE_MODE_V 0x1
|
|
#define SPI_SLAVE_MODE_S 30
|
|
/* SPI_SLV_WR_RD_BUF_EN : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: write and read buffer enable in the slave mode*/
|
|
#define SPI_SLV_WR_RD_BUF_EN (BIT(29))
|
|
#define SPI_SLV_WR_RD_BUF_EN_M (BIT(29))
|
|
#define SPI_SLV_WR_RD_BUF_EN_V 0x1
|
|
#define SPI_SLV_WR_RD_BUF_EN_S 29
|
|
/* SPI_SLV_WR_RD_STA_EN : R/W ;bitpos:[28] ;default: 1'b0 ; */
|
|
/*description: write and read status enable in the slave mode*/
|
|
#define SPI_SLV_WR_RD_STA_EN (BIT(28))
|
|
#define SPI_SLV_WR_RD_STA_EN_M (BIT(28))
|
|
#define SPI_SLV_WR_RD_STA_EN_V 0x1
|
|
#define SPI_SLV_WR_RD_STA_EN_S 28
|
|
/* SPI_SLV_CMD_DEFINE : R/W ;bitpos:[27] ;default: 1'b0 ; */
|
|
/*description: 1: slave mode commands are defined in SPI_SLAVE3. 0: slave mode
|
|
commands are fixed as: 1: write-status 2: write-buffer and 3: read-buffer.*/
|
|
#define SPI_SLV_CMD_DEFINE (BIT(27))
|
|
#define SPI_SLV_CMD_DEFINE_M (BIT(27))
|
|
#define SPI_SLV_CMD_DEFINE_V 0x1
|
|
#define SPI_SLV_CMD_DEFINE_S 27
|
|
/* SPI_TRANS_CNT : RO ;bitpos:[26:23] ;default: 4'b0 ; */
|
|
/*description: The operations counter in both the master mode and the slave
|
|
mode. 4: read-status*/
|
|
#define SPI_TRANS_CNT 0x0000000F
|
|
#define SPI_TRANS_CNT_M ((SPI_TRANS_CNT_V)<<(SPI_TRANS_CNT_S))
|
|
#define SPI_TRANS_CNT_V 0xF
|
|
#define SPI_TRANS_CNT_S 23
|
|
/* SPI_SLV_LAST_STATE : RO ;bitpos:[22:20] ;default: 3'b0 ; */
|
|
/*description: In the slave mode it is the state of spi state machine.*/
|
|
#define SPI_SLV_LAST_STATE 0x00000007
|
|
#define SPI_SLV_LAST_STATE_M ((SPI_SLV_LAST_STATE_V)<<(SPI_SLV_LAST_STATE_S))
|
|
#define SPI_SLV_LAST_STATE_V 0x7
|
|
#define SPI_SLV_LAST_STATE_S 20
|
|
/* SPI_SLV_LAST_COMMAND : RO ;bitpos:[19:17] ;default: 3'b0 ; */
|
|
/*description: In the slave mode it is the value of command.*/
|
|
#define SPI_SLV_LAST_COMMAND 0x00000007
|
|
#define SPI_SLV_LAST_COMMAND_M ((SPI_SLV_LAST_COMMAND_V)<<(SPI_SLV_LAST_COMMAND_S))
|
|
#define SPI_SLV_LAST_COMMAND_V 0x7
|
|
#define SPI_SLV_LAST_COMMAND_S 17
|
|
/* SPI_CS_I_MODE : R/W ;bitpos:[11:10] ;default: 2'b0 ; */
|
|
/*description: In the slave mode this bits used to synchronize the input spi
|
|
cs signal and eliminate spi cs jitter.*/
|
|
#define SPI_CS_I_MODE 0x00000003
|
|
#define SPI_CS_I_MODE_M ((SPI_CS_I_MODE_V)<<(SPI_CS_I_MODE_S))
|
|
#define SPI_CS_I_MODE_V 0x3
|
|
#define SPI_CS_I_MODE_S 10
|
|
/* SPI_INT_EN : R/W ;bitpos:[9:5] ;default: 5'b1_0000 ; */
|
|
/*description: Interrupt enable bits for the below 5 sources*/
|
|
#define SPI_INT_EN 0x0000001F
|
|
#define SPI_INT_EN_M ((SPI_INT_EN_V)<<(SPI_INT_EN_S))
|
|
#define SPI_INT_EN_V 0x1F
|
|
#define SPI_INT_EN_S 5
|
|
/* SPI_TRANS_DONE : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The interrupt raw bit for the completion of any operation in
|
|
both the master mode and the slave mode.*/
|
|
#define SPI_TRANS_DONE (BIT(4))
|
|
#define SPI_TRANS_DONE_M (BIT(4))
|
|
#define SPI_TRANS_DONE_V 0x1
|
|
#define SPI_TRANS_DONE_S 4
|
|
/* SPI_SLV_WR_STA_DONE : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The interrupt raw bit for the completion of write-status operation
|
|
in the slave mode.*/
|
|
#define SPI_SLV_WR_STA_DONE (BIT(3))
|
|
#define SPI_SLV_WR_STA_DONE_M (BIT(3))
|
|
#define SPI_SLV_WR_STA_DONE_V 0x1
|
|
#define SPI_SLV_WR_STA_DONE_S 3
|
|
/* SPI_SLV_RD_STA_DONE : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The interrupt raw bit for the completion of read-status operation
|
|
in the slave mode.*/
|
|
#define SPI_SLV_RD_STA_DONE (BIT(2))
|
|
#define SPI_SLV_RD_STA_DONE_M (BIT(2))
|
|
#define SPI_SLV_RD_STA_DONE_V 0x1
|
|
#define SPI_SLV_RD_STA_DONE_S 2
|
|
/* SPI_SLV_WR_BUF_DONE : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The interrupt raw bit for the completion of write-buffer operation
|
|
in the slave mode.*/
|
|
#define SPI_SLV_WR_BUF_DONE (BIT(1))
|
|
#define SPI_SLV_WR_BUF_DONE_M (BIT(1))
|
|
#define SPI_SLV_WR_BUF_DONE_V 0x1
|
|
#define SPI_SLV_WR_BUF_DONE_S 1
|
|
/* SPI_SLV_RD_BUF_DONE : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: The interrupt raw bit for the completion of read-buffer operation
|
|
in the slave mode.*/
|
|
#define SPI_SLV_RD_BUF_DONE (BIT(0))
|
|
#define SPI_SLV_RD_BUF_DONE_M (BIT(0))
|
|
#define SPI_SLV_RD_BUF_DONE_V 0x1
|
|
#define SPI_SLV_RD_BUF_DONE_S 0
|
|
|
|
#define SPI_SLAVE1_REG(i) (REG_SPI_BASE(i) + 0x3C)
|
|
/* SPI_SLV_STATUS_BITLEN : R/W ;bitpos:[31:27] ;default: 5'b0 ; */
|
|
/*description: In the slave mode it is the length of status bit.*/
|
|
#define SPI_SLV_STATUS_BITLEN 0x0000001F
|
|
#define SPI_SLV_STATUS_BITLEN_M ((SPI_SLV_STATUS_BITLEN_V)<<(SPI_SLV_STATUS_BITLEN_S))
|
|
#define SPI_SLV_STATUS_BITLEN_V 0x1F
|
|
#define SPI_SLV_STATUS_BITLEN_S 27
|
|
/* SPI_SLV_STATUS_FAST_EN : R/W ;bitpos:[26] ;default: 1'b0 ; */
|
|
/*description: In the slave mode enable fast read status.*/
|
|
#define SPI_SLV_STATUS_FAST_EN (BIT(26))
|
|
#define SPI_SLV_STATUS_FAST_EN_M (BIT(26))
|
|
#define SPI_SLV_STATUS_FAST_EN_V 0x1
|
|
#define SPI_SLV_STATUS_FAST_EN_S 26
|
|
/* SPI_SLV_STATUS_READBACK : R/W ;bitpos:[25] ;default: 1'b1 ; */
|
|
/*description: In the slave mode 1:read register of SPI_SLV_WR_STATUS 0: read
|
|
register of SPI_RD_STATUS.*/
|
|
#define SPI_SLV_STATUS_READBACK (BIT(25))
|
|
#define SPI_SLV_STATUS_READBACK_M (BIT(25))
|
|
#define SPI_SLV_STATUS_READBACK_V 0x1
|
|
#define SPI_SLV_STATUS_READBACK_S 25
|
|
/* SPI_SLV_RD_ADDR_BITLEN : R/W ;bitpos:[15:10] ;default: 6'h0 ; */
|
|
/*description: In the slave mode it is the address length in bits for read-buffer
|
|
operation. The register value shall be (bit_num-1).*/
|
|
#define SPI_SLV_RD_ADDR_BITLEN 0x0000003F
|
|
#define SPI_SLV_RD_ADDR_BITLEN_M ((SPI_SLV_RD_ADDR_BITLEN_V)<<(SPI_SLV_RD_ADDR_BITLEN_S))
|
|
#define SPI_SLV_RD_ADDR_BITLEN_V 0x3F
|
|
#define SPI_SLV_RD_ADDR_BITLEN_S 10
|
|
/* SPI_SLV_WR_ADDR_BITLEN : R/W ;bitpos:[9:4] ;default: 6'h0 ; */
|
|
/*description: In the slave mode it is the address length in bits for write-buffer
|
|
operation. The register value shall be (bit_num-1).*/
|
|
#define SPI_SLV_WR_ADDR_BITLEN 0x0000003F
|
|
#define SPI_SLV_WR_ADDR_BITLEN_M ((SPI_SLV_WR_ADDR_BITLEN_V)<<(SPI_SLV_WR_ADDR_BITLEN_S))
|
|
#define SPI_SLV_WR_ADDR_BITLEN_V 0x3F
|
|
#define SPI_SLV_WR_ADDR_BITLEN_S 4
|
|
/* SPI_SLV_WRSTA_DUMMY_EN : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: In the slave mode it is the enable bit of dummy phase for write-status
|
|
operations.*/
|
|
#define SPI_SLV_WRSTA_DUMMY_EN (BIT(3))
|
|
#define SPI_SLV_WRSTA_DUMMY_EN_M (BIT(3))
|
|
#define SPI_SLV_WRSTA_DUMMY_EN_V 0x1
|
|
#define SPI_SLV_WRSTA_DUMMY_EN_S 3
|
|
/* SPI_SLV_RDSTA_DUMMY_EN : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: In the slave mode it is the enable bit of dummy phase for read-status
|
|
operations.*/
|
|
#define SPI_SLV_RDSTA_DUMMY_EN (BIT(2))
|
|
#define SPI_SLV_RDSTA_DUMMY_EN_M (BIT(2))
|
|
#define SPI_SLV_RDSTA_DUMMY_EN_V 0x1
|
|
#define SPI_SLV_RDSTA_DUMMY_EN_S 2
|
|
/* SPI_SLV_WRBUF_DUMMY_EN : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: In the slave mode it is the enable bit of dummy phase for write-buffer
|
|
operations.*/
|
|
#define SPI_SLV_WRBUF_DUMMY_EN (BIT(1))
|
|
#define SPI_SLV_WRBUF_DUMMY_EN_M (BIT(1))
|
|
#define SPI_SLV_WRBUF_DUMMY_EN_V 0x1
|
|
#define SPI_SLV_WRBUF_DUMMY_EN_S 1
|
|
/* SPI_SLV_RDBUF_DUMMY_EN : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: In the slave mode it is the enable bit of dummy phase for read-buffer
|
|
operations.*/
|
|
#define SPI_SLV_RDBUF_DUMMY_EN (BIT(0))
|
|
#define SPI_SLV_RDBUF_DUMMY_EN_M (BIT(0))
|
|
#define SPI_SLV_RDBUF_DUMMY_EN_V 0x1
|
|
#define SPI_SLV_RDBUF_DUMMY_EN_S 0
|
|
|
|
#define SPI_SLAVE2_REG(i) (REG_SPI_BASE(i) + 0x40)
|
|
/* SPI_SLV_WRBUF_DUMMY_CYCLELEN : R/W ;bitpos:[31:24] ;default: 8'b0 ; */
|
|
/*description: In the slave mode it is the length in spi_clk cycles of dummy
|
|
phase for write-buffer operations. The register value shall be (cycle_num-1).*/
|
|
#define SPI_SLV_WRBUF_DUMMY_CYCLELEN 0x000000FF
|
|
#define SPI_SLV_WRBUF_DUMMY_CYCLELEN_M ((SPI_SLV_WRBUF_DUMMY_CYCLELEN_V)<<(SPI_SLV_WRBUF_DUMMY_CYCLELEN_S))
|
|
#define SPI_SLV_WRBUF_DUMMY_CYCLELEN_V 0xFF
|
|
#define SPI_SLV_WRBUF_DUMMY_CYCLELEN_S 24
|
|
/* SPI_SLV_RDBUF_DUMMY_CYCLELEN : R/W ;bitpos:[23:16] ;default: 8'h0 ; */
|
|
/*description: In the slave mode it is the length in spi_clk cycles of dummy
|
|
phase for read-buffer operations. The register value shall be (cycle_num-1).*/
|
|
#define SPI_SLV_RDBUF_DUMMY_CYCLELEN 0x000000FF
|
|
#define SPI_SLV_RDBUF_DUMMY_CYCLELEN_M ((SPI_SLV_RDBUF_DUMMY_CYCLELEN_V)<<(SPI_SLV_RDBUF_DUMMY_CYCLELEN_S))
|
|
#define SPI_SLV_RDBUF_DUMMY_CYCLELEN_V 0xFF
|
|
#define SPI_SLV_RDBUF_DUMMY_CYCLELEN_S 16
|
|
/* SPI_SLV_WRSTA_DUMMY_CYCLELEN : R/W ;bitpos:[15:8] ;default: 8'h0 ; */
|
|
/*description: In the slave mode it is the length in spi_clk cycles of dummy
|
|
phase for write-status operations. The register value shall be (cycle_num-1).*/
|
|
#define SPI_SLV_WRSTA_DUMMY_CYCLELEN 0x000000FF
|
|
#define SPI_SLV_WRSTA_DUMMY_CYCLELEN_M ((SPI_SLV_WRSTA_DUMMY_CYCLELEN_V)<<(SPI_SLV_WRSTA_DUMMY_CYCLELEN_S))
|
|
#define SPI_SLV_WRSTA_DUMMY_CYCLELEN_V 0xFF
|
|
#define SPI_SLV_WRSTA_DUMMY_CYCLELEN_S 8
|
|
/* SPI_SLV_RDSTA_DUMMY_CYCLELEN : R/W ;bitpos:[7:0] ;default: 8'h0 ; */
|
|
/*description: In the slave mode it is the length in spi_clk cycles of dummy
|
|
phase for read-status operations. The register value shall be (cycle_num-1).*/
|
|
#define SPI_SLV_RDSTA_DUMMY_CYCLELEN 0x000000FF
|
|
#define SPI_SLV_RDSTA_DUMMY_CYCLELEN_M ((SPI_SLV_RDSTA_DUMMY_CYCLELEN_V)<<(SPI_SLV_RDSTA_DUMMY_CYCLELEN_S))
|
|
#define SPI_SLV_RDSTA_DUMMY_CYCLELEN_V 0xFF
|
|
#define SPI_SLV_RDSTA_DUMMY_CYCLELEN_S 0
|
|
|
|
#define SPI_SLAVE3_REG(i) (REG_SPI_BASE(i) + 0x44)
|
|
/* SPI_SLV_WRSTA_CMD_VALUE : R/W ;bitpos:[31:24] ;default: 8'b0 ; */
|
|
/*description: In the slave mode it is the value of write-status command.*/
|
|
#define SPI_SLV_WRSTA_CMD_VALUE 0x000000FF
|
|
#define SPI_SLV_WRSTA_CMD_VALUE_M ((SPI_SLV_WRSTA_CMD_VALUE_V)<<(SPI_SLV_WRSTA_CMD_VALUE_S))
|
|
#define SPI_SLV_WRSTA_CMD_VALUE_V 0xFF
|
|
#define SPI_SLV_WRSTA_CMD_VALUE_S 24
|
|
/* SPI_SLV_RDSTA_CMD_VALUE : R/W ;bitpos:[23:16] ;default: 8'b0 ; */
|
|
/*description: In the slave mode it is the value of read-status command.*/
|
|
#define SPI_SLV_RDSTA_CMD_VALUE 0x000000FF
|
|
#define SPI_SLV_RDSTA_CMD_VALUE_M ((SPI_SLV_RDSTA_CMD_VALUE_V)<<(SPI_SLV_RDSTA_CMD_VALUE_S))
|
|
#define SPI_SLV_RDSTA_CMD_VALUE_V 0xFF
|
|
#define SPI_SLV_RDSTA_CMD_VALUE_S 16
|
|
/* SPI_SLV_WRBUF_CMD_VALUE : R/W ;bitpos:[15:8] ;default: 8'b0 ; */
|
|
/*description: In the slave mode it is the value of write-buffer command.*/
|
|
#define SPI_SLV_WRBUF_CMD_VALUE 0x000000FF
|
|
#define SPI_SLV_WRBUF_CMD_VALUE_M ((SPI_SLV_WRBUF_CMD_VALUE_V)<<(SPI_SLV_WRBUF_CMD_VALUE_S))
|
|
#define SPI_SLV_WRBUF_CMD_VALUE_V 0xFF
|
|
#define SPI_SLV_WRBUF_CMD_VALUE_S 8
|
|
/* SPI_SLV_RDBUF_CMD_VALUE : R/W ;bitpos:[7:0] ;default: 8'b0 ; */
|
|
/*description: In the slave mode it is the value of read-buffer command.*/
|
|
#define SPI_SLV_RDBUF_CMD_VALUE 0x000000FF
|
|
#define SPI_SLV_RDBUF_CMD_VALUE_M ((SPI_SLV_RDBUF_CMD_VALUE_V)<<(SPI_SLV_RDBUF_CMD_VALUE_S))
|
|
#define SPI_SLV_RDBUF_CMD_VALUE_V 0xFF
|
|
#define SPI_SLV_RDBUF_CMD_VALUE_S 0
|
|
|
|
#define SPI_SLV_WRBUF_DLEN_REG(i) (REG_SPI_BASE(i) + 0x48)
|
|
/* SPI_SLV_WRBUF_DBITLEN : R/W ;bitpos:[23:0] ;default: 24'h0 ; */
|
|
/*description: In the slave mode it is the length in bits for write-buffer operations.
|
|
The register value shall be (bit_num-1).*/
|
|
#define SPI_SLV_WRBUF_DBITLEN 0x00FFFFFF
|
|
#define SPI_SLV_WRBUF_DBITLEN_M ((SPI_SLV_WRBUF_DBITLEN_V)<<(SPI_SLV_WRBUF_DBITLEN_S))
|
|
#define SPI_SLV_WRBUF_DBITLEN_V 0xFFFFFF
|
|
#define SPI_SLV_WRBUF_DBITLEN_S 0
|
|
|
|
#define SPI_SLV_RDBUF_DLEN_REG(i) (REG_SPI_BASE(i) + 0x4C)
|
|
/* SPI_SLV_RDBUF_DBITLEN : R/W ;bitpos:[23:0] ;default: 24'h0 ; */
|
|
/*description: In the slave mode it is the length in bits for read-buffer operations.
|
|
The register value shall be (bit_num-1).*/
|
|
#define SPI_SLV_RDBUF_DBITLEN 0x00FFFFFF
|
|
#define SPI_SLV_RDBUF_DBITLEN_M ((SPI_SLV_RDBUF_DBITLEN_V)<<(SPI_SLV_RDBUF_DBITLEN_S))
|
|
#define SPI_SLV_RDBUF_DBITLEN_V 0xFFFFFF
|
|
#define SPI_SLV_RDBUF_DBITLEN_S 0
|
|
|
|
#define SPI_CACHE_FCTRL_REG(i) (REG_SPI_BASE(i) + 0x50)
|
|
/* SPI_CACHE_FLASH_PES_EN : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: For SPI0 spi1 send suspend command before cache read flash
|
|
1: enable 0:disable.*/
|
|
#define SPI_CACHE_FLASH_PES_EN (BIT(3))
|
|
#define SPI_CACHE_FLASH_PES_EN_M (BIT(3))
|
|
#define SPI_CACHE_FLASH_PES_EN_V 0x1
|
|
#define SPI_CACHE_FLASH_PES_EN_S 3
|
|
/* SPI_CACHE_FLASH_USR_CMD : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: For SPI0 cache read flash for user define command 1: enable 0:disable.*/
|
|
#define SPI_CACHE_FLASH_USR_CMD (BIT(2))
|
|
#define SPI_CACHE_FLASH_USR_CMD_M (BIT(2))
|
|
#define SPI_CACHE_FLASH_USR_CMD_V 0x1
|
|
#define SPI_CACHE_FLASH_USR_CMD_S 2
|
|
/* SPI_CACHE_USR_CMD_4BYTE : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: For SPI0 cache read flash with 4 bytes command 1: enable 0:disable.*/
|
|
#define SPI_CACHE_USR_CMD_4BYTE (BIT(1))
|
|
#define SPI_CACHE_USR_CMD_4BYTE_M (BIT(1))
|
|
#define SPI_CACHE_USR_CMD_4BYTE_V 0x1
|
|
#define SPI_CACHE_USR_CMD_4BYTE_S 1
|
|
/* SPI_CACHE_REQ_EN : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: For SPI0 Cache access enable 1: enable 0:disable.*/
|
|
#define SPI_CACHE_REQ_EN (BIT(0))
|
|
#define SPI_CACHE_REQ_EN_M (BIT(0))
|
|
#define SPI_CACHE_REQ_EN_V 0x1
|
|
#define SPI_CACHE_REQ_EN_S 0
|
|
|
|
#define SPI_CACHE_SCTRL_REG(i) (REG_SPI_BASE(i) + 0x54)
|
|
/* SPI_CACHE_SRAM_USR_WCMD : R/W ;bitpos:[28] ;default: 1'b1 ; */
|
|
/*description: For SPI0 In the spi sram mode cache write sram for user define command*/
|
|
#define SPI_CACHE_SRAM_USR_WCMD (BIT(28))
|
|
#define SPI_CACHE_SRAM_USR_WCMD_M (BIT(28))
|
|
#define SPI_CACHE_SRAM_USR_WCMD_V 0x1
|
|
#define SPI_CACHE_SRAM_USR_WCMD_S 28
|
|
/* SPI_SRAM_ADDR_BITLEN : R/W ;bitpos:[27:22] ;default: 6'd23 ; */
|
|
/*description: For SPI0 In the sram mode it is the length in bits of address
|
|
phase. The register value shall be (bit_num-1).*/
|
|
#define SPI_SRAM_ADDR_BITLEN 0x0000003F
|
|
#define SPI_SRAM_ADDR_BITLEN_M ((SPI_SRAM_ADDR_BITLEN_V)<<(SPI_SRAM_ADDR_BITLEN_S))
|
|
#define SPI_SRAM_ADDR_BITLEN_V 0x3F
|
|
#define SPI_SRAM_ADDR_BITLEN_S 22
|
|
/* SPI_SRAM_DUMMY_CYCLELEN : R/W ;bitpos:[21:14] ;default: 8'b1 ; */
|
|
/*description: For SPI0 In the sram mode it is the length in bits of address
|
|
phase. The register value shall be (bit_num-1).*/
|
|
#define SPI_SRAM_DUMMY_CYCLELEN 0x000000FF
|
|
#define SPI_SRAM_DUMMY_CYCLELEN_M ((SPI_SRAM_DUMMY_CYCLELEN_V)<<(SPI_SRAM_DUMMY_CYCLELEN_S))
|
|
#define SPI_SRAM_DUMMY_CYCLELEN_V 0xFF
|
|
#define SPI_SRAM_DUMMY_CYCLELEN_S 14
|
|
/* SPI_SRAM_BYTES_LEN : R/W ;bitpos:[13:6] ;default: 8'b32 ; */
|
|
/*description: For SPI0 In the sram mode it is the byte length of spi read sram data.*/
|
|
#define SPI_SRAM_BYTES_LEN 0x000000FF
|
|
#define SPI_SRAM_BYTES_LEN_M ((SPI_SRAM_BYTES_LEN_V)<<(SPI_SRAM_BYTES_LEN_S))
|
|
#define SPI_SRAM_BYTES_LEN_V 0xFF
|
|
#define SPI_SRAM_BYTES_LEN_S 6
|
|
/* SPI_CACHE_SRAM_USR_RCMD : R/W ;bitpos:[5] ;default: 1'b1 ; */
|
|
/*description: For SPI0 In the spi sram mode cache read sram for user define command.*/
|
|
#define SPI_CACHE_SRAM_USR_RCMD (BIT(5))
|
|
#define SPI_CACHE_SRAM_USR_RCMD_M (BIT(5))
|
|
#define SPI_CACHE_SRAM_USR_RCMD_V 0x1
|
|
#define SPI_CACHE_SRAM_USR_RCMD_S 5
|
|
/* SPI_USR_RD_SRAM_DUMMY : R/W ;bitpos:[4] ;default: 1'b1 ; */
|
|
/*description: For SPI0 In the spi sram mode it is the enable bit of dummy
|
|
phase for read operations.*/
|
|
#define SPI_USR_RD_SRAM_DUMMY (BIT(4))
|
|
#define SPI_USR_RD_SRAM_DUMMY_M (BIT(4))
|
|
#define SPI_USR_RD_SRAM_DUMMY_V 0x1
|
|
#define SPI_USR_RD_SRAM_DUMMY_S 4
|
|
/* SPI_USR_WR_SRAM_DUMMY : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: For SPI0 In the spi sram mode it is the enable bit of dummy
|
|
phase for write operations.*/
|
|
#define SPI_USR_WR_SRAM_DUMMY (BIT(3))
|
|
#define SPI_USR_WR_SRAM_DUMMY_M (BIT(3))
|
|
#define SPI_USR_WR_SRAM_DUMMY_V 0x1
|
|
#define SPI_USR_WR_SRAM_DUMMY_S 3
|
|
/* SPI_USR_SRAM_QIO : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: For SPI0 In the spi sram mode spi quad I/O mode enable 1: enable 0:disable*/
|
|
#define SPI_USR_SRAM_QIO (BIT(2))
|
|
#define SPI_USR_SRAM_QIO_M (BIT(2))
|
|
#define SPI_USR_SRAM_QIO_V 0x1
|
|
#define SPI_USR_SRAM_QIO_S 2
|
|
/* SPI_USR_SRAM_DIO : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: For SPI0 In the spi sram mode spi dual I/O mode enable 1: enable 0:disable*/
|
|
#define SPI_USR_SRAM_DIO (BIT(1))
|
|
#define SPI_USR_SRAM_DIO_M (BIT(1))
|
|
#define SPI_USR_SRAM_DIO_V 0x1
|
|
#define SPI_USR_SRAM_DIO_S 1
|
|
|
|
#define SPI_SRAM_CMD_REG(i) (REG_SPI_BASE(i) + 0x58)
|
|
/* SPI_SRAM_RSTIO : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: For SPI0 SRAM IO mode reset enable. SRAM IO mode reset operation
|
|
will be triggered when the bit is set. The bit will be cleared once the operation done*/
|
|
#define SPI_SRAM_RSTIO (BIT(4))
|
|
#define SPI_SRAM_RSTIO_M (BIT(4))
|
|
#define SPI_SRAM_RSTIO_V 0x1
|
|
#define SPI_SRAM_RSTIO_S 4
|
|
/* SPI_SRAM_QIO : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: For SPI0 SRAM QIO mode enable . SRAM QIO enable command will
|
|
be send when the bit is set. The bit will be cleared once the operation done.*/
|
|
#define SPI_SRAM_QIO (BIT(1))
|
|
#define SPI_SRAM_QIO_M (BIT(1))
|
|
#define SPI_SRAM_QIO_V 0x1
|
|
#define SPI_SRAM_QIO_S 1
|
|
/* SPI_SRAM_DIO : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: For SPI0 SRAM DIO mode enable . SRAM DIO enable command will
|
|
be send when the bit is set. The bit will be cleared once the operation done.*/
|
|
#define SPI_SRAM_DIO (BIT(0))
|
|
#define SPI_SRAM_DIO_M (BIT(0))
|
|
#define SPI_SRAM_DIO_V 0x1
|
|
#define SPI_SRAM_DIO_S 0
|
|
|
|
#define SPI_SRAM_DRD_CMD_REG(i) (REG_SPI_BASE(i) + 0x5C)
|
|
/* SPI_CACHE_SRAM_USR_RD_CMD_BITLEN : R/W ;bitpos:[31:28] ;default: 4'h0 ; */
|
|
/*description: For SPI0 When cache mode is enable it is the length in bits of
|
|
command phase for SRAM. The register value shall be (bit_num-1).*/
|
|
#define SPI_CACHE_SRAM_USR_RD_CMD_BITLEN 0x0000000F
|
|
#define SPI_CACHE_SRAM_USR_RD_CMD_BITLEN_M ((SPI_CACHE_SRAM_USR_RD_CMD_BITLEN_V)<<(SPI_CACHE_SRAM_USR_RD_CMD_BITLEN_S))
|
|
#define SPI_CACHE_SRAM_USR_RD_CMD_BITLEN_V 0xF
|
|
#define SPI_CACHE_SRAM_USR_RD_CMD_BITLEN_S 28
|
|
/* SPI_CACHE_SRAM_USR_RD_CMD_VALUE : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: For SPI0 When cache mode is enable it is the read command value
|
|
of command phase for SRAM.*/
|
|
#define SPI_CACHE_SRAM_USR_RD_CMD_VALUE 0x0000FFFF
|
|
#define SPI_CACHE_SRAM_USR_RD_CMD_VALUE_M ((SPI_CACHE_SRAM_USR_RD_CMD_VALUE_V)<<(SPI_CACHE_SRAM_USR_RD_CMD_VALUE_S))
|
|
#define SPI_CACHE_SRAM_USR_RD_CMD_VALUE_V 0xFFFF
|
|
#define SPI_CACHE_SRAM_USR_RD_CMD_VALUE_S 0
|
|
|
|
#define SPI_SRAM_DWR_CMD_REG(i) (REG_SPI_BASE(i) + 0x60)
|
|
/* SPI_CACHE_SRAM_USR_WR_CMD_BITLEN : R/W ;bitpos:[31:28] ;default: 4'h0 ; */
|
|
/*description: For SPI0 When cache mode is enable it is the in bits of command
|
|
phase for SRAM. The register value shall be (bit_num-1).*/
|
|
#define SPI_CACHE_SRAM_USR_WR_CMD_BITLEN 0x0000000F
|
|
#define SPI_CACHE_SRAM_USR_WR_CMD_BITLEN_M ((SPI_CACHE_SRAM_USR_WR_CMD_BITLEN_V)<<(SPI_CACHE_SRAM_USR_WR_CMD_BITLEN_S))
|
|
#define SPI_CACHE_SRAM_USR_WR_CMD_BITLEN_V 0xF
|
|
#define SPI_CACHE_SRAM_USR_WR_CMD_BITLEN_S 28
|
|
/* SPI_CACHE_SRAM_USR_WR_CMD_VALUE : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: For SPI0 When cache mode is enable it is the write command value
|
|
of command phase for SRAM.*/
|
|
#define SPI_CACHE_SRAM_USR_WR_CMD_VALUE 0x0000FFFF
|
|
#define SPI_CACHE_SRAM_USR_WR_CMD_VALUE_M ((SPI_CACHE_SRAM_USR_WR_CMD_VALUE_V)<<(SPI_CACHE_SRAM_USR_WR_CMD_VALUE_S))
|
|
#define SPI_CACHE_SRAM_USR_WR_CMD_VALUE_V 0xFFFF
|
|
#define SPI_CACHE_SRAM_USR_WR_CMD_VALUE_S 0
|
|
|
|
#define SPI_SLV_RD_BIT_REG(i) (REG_SPI_BASE(i) + 0x64)
|
|
/* SPI_SLV_RDATA_BIT : RW ;bitpos:[23:0] ;default: 24'b0 ; */
|
|
/*description: In the slave mode it is the bit length of read data. The value
|
|
is the length - 1.*/
|
|
#define SPI_SLV_RDATA_BIT 0x00FFFFFF
|
|
#define SPI_SLV_RDATA_BIT_M ((SPI_SLV_RDATA_BIT_V)<<(SPI_SLV_RDATA_BIT_S))
|
|
#define SPI_SLV_RDATA_BIT_V 0xFFFFFF
|
|
#define SPI_SLV_RDATA_BIT_S 0
|
|
|
|
#define SPI_W0_REG(i) (REG_SPI_BASE(i) + 0x80)
|
|
/* SPI_BUF0 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF0 0xFFFFFFFF
|
|
#define SPI_BUF0_M ((SPI_BUF0_V)<<(SPI_BUF0_S))
|
|
#define SPI_BUF0_V 0xFFFFFFFF
|
|
#define SPI_BUF0_S 0
|
|
|
|
#define SPI_W1_REG(i) (REG_SPI_BASE(i) + 0x84)
|
|
/* SPI_BUF1 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF1 0xFFFFFFFF
|
|
#define SPI_BUF1_M ((SPI_BUF1_V)<<(SPI_BUF1_S))
|
|
#define SPI_BUF1_V 0xFFFFFFFF
|
|
#define SPI_BUF1_S 0
|
|
|
|
#define SPI_W2_REG(i) (REG_SPI_BASE(i) + 0x88)
|
|
/* SPI_BUF2 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF2 0xFFFFFFFF
|
|
#define SPI_BUF2_M ((SPI_BUF2_V)<<(SPI_BUF2_S))
|
|
#define SPI_BUF2_V 0xFFFFFFFF
|
|
#define SPI_BUF2_S 0
|
|
|
|
#define SPI_W3_REG(i) (REG_SPI_BASE(i) + 0x8C)
|
|
/* SPI_BUF3 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF3 0xFFFFFFFF
|
|
#define SPI_BUF3_M ((SPI_BUF3_V)<<(SPI_BUF3_S))
|
|
#define SPI_BUF3_V 0xFFFFFFFF
|
|
#define SPI_BUF3_S 0
|
|
|
|
#define SPI_W4_REG(i) (REG_SPI_BASE(i) + 0x90)
|
|
/* SPI_BUF4 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF4 0xFFFFFFFF
|
|
#define SPI_BUF4_M ((SPI_BUF4_V)<<(SPI_BUF4_S))
|
|
#define SPI_BUF4_V 0xFFFFFFFF
|
|
#define SPI_BUF4_S 0
|
|
|
|
#define SPI_W5_REG(i) (REG_SPI_BASE(i) + 0x94)
|
|
/* SPI_BUF5 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF5 0xFFFFFFFF
|
|
#define SPI_BUF5_M ((SPI_BUF5_V)<<(SPI_BUF5_S))
|
|
#define SPI_BUF5_V 0xFFFFFFFF
|
|
#define SPI_BUF5_S 0
|
|
|
|
#define SPI_W6_REG(i) (REG_SPI_BASE(i) + 0x98)
|
|
/* SPI_BUF6 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF6 0xFFFFFFFF
|
|
#define SPI_BUF6_M ((SPI_BUF6_V)<<(SPI_BUF6_S))
|
|
#define SPI_BUF6_V 0xFFFFFFFF
|
|
#define SPI_BUF6_S 0
|
|
|
|
#define SPI_W7_REG(i) (REG_SPI_BASE(i) + 0x9C)
|
|
/* SPI_BUF7 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF7 0xFFFFFFFF
|
|
#define SPI_BUF7_M ((SPI_BUF7_V)<<(SPI_BUF7_S))
|
|
#define SPI_BUF7_V 0xFFFFFFFF
|
|
#define SPI_BUF7_S 0
|
|
|
|
#define SPI_W8_REG(i) (REG_SPI_BASE(i) + 0xA0)
|
|
/* SPI_BUF8 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF8 0xFFFFFFFF
|
|
#define SPI_BUF8_M ((SPI_BUF8_V)<<(SPI_BUF8_S))
|
|
#define SPI_BUF8_V 0xFFFFFFFF
|
|
#define SPI_BUF8_S 0
|
|
|
|
#define SPI_W9_REG(i) (REG_SPI_BASE(i) + 0xA4)
|
|
/* SPI_BUF9 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF9 0xFFFFFFFF
|
|
#define SPI_BUF9_M ((SPI_BUF9_V)<<(SPI_BUF9_S))
|
|
#define SPI_BUF9_V 0xFFFFFFFF
|
|
#define SPI_BUF9_S 0
|
|
|
|
#define SPI_W10_REG(i) (REG_SPI_BASE(i) + 0xA8)
|
|
/* SPI_BUF10 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF10 0xFFFFFFFF
|
|
#define SPI_BUF10_M ((SPI_BUF10_V)<<(SPI_BUF10_S))
|
|
#define SPI_BUF10_V 0xFFFFFFFF
|
|
#define SPI_BUF10_S 0
|
|
|
|
#define SPI_W11_REG(i) (REG_SPI_BASE(i) + 0xAC)
|
|
/* SPI_BUF11 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF11 0xFFFFFFFF
|
|
#define SPI_BUF11_M ((SPI_BUF11_V)<<(SPI_BUF11_S))
|
|
#define SPI_BUF11_V 0xFFFFFFFF
|
|
#define SPI_BUF11_S 0
|
|
|
|
#define SPI_W12_REG(i) (REG_SPI_BASE(i) + 0xB0)
|
|
/* SPI_BUF12 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF12 0xFFFFFFFF
|
|
#define SPI_BUF12_M ((SPI_BUF12_V)<<(SPI_BUF12_S))
|
|
#define SPI_BUF12_V 0xFFFFFFFF
|
|
#define SPI_BUF12_S 0
|
|
|
|
#define SPI_W13_REG(i) (REG_SPI_BASE(i) + 0xB4)
|
|
/* SPI_BUF13 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF13 0xFFFFFFFF
|
|
#define SPI_BUF13_M ((SPI_BUF13_V)<<(SPI_BUF13_S))
|
|
#define SPI_BUF13_V 0xFFFFFFFF
|
|
#define SPI_BUF13_S 0
|
|
|
|
#define SPI_W14_REG(i) (REG_SPI_BASE(i) + 0xB8)
|
|
/* SPI_BUF14 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF14 0xFFFFFFFF
|
|
#define SPI_BUF14_M ((SPI_BUF14_V)<<(SPI_BUF14_S))
|
|
#define SPI_BUF14_V 0xFFFFFFFF
|
|
#define SPI_BUF14_S 0
|
|
|
|
#define SPI_W15_REG(i) (REG_SPI_BASE(i) + 0xBC)
|
|
/* SPI_BUF15 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_BUF15 0xFFFFFFFF
|
|
#define SPI_BUF15_M ((SPI_BUF15_V)<<(SPI_BUF15_S))
|
|
#define SPI_BUF15_V 0xFFFFFFFF
|
|
#define SPI_BUF15_S 0
|
|
|
|
#define SPI_TX_CRC_REG(i) (REG_SPI_BASE(i) + 0xC0)
|
|
/* SPI_TX_CRC_DATA : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: For SPI1 the value of crc32 for 256 bits data.*/
|
|
#define SPI_TX_CRC_DATA 0xFFFFFFFF
|
|
#define SPI_TX_CRC_DATA_M ((SPI_TX_CRC_DATA_V)<<(SPI_TX_CRC_DATA_S))
|
|
#define SPI_TX_CRC_DATA_V 0xFFFFFFFF
|
|
#define SPI_TX_CRC_DATA_S 0
|
|
|
|
#define SPI_EXT0_REG(i) (REG_SPI_BASE(i) + 0xF0)
|
|
/* SPI_T_PP_ENA : R/W ;bitpos:[31] ;default: 1'b1 ; */
|
|
/*description: page program delay enable.*/
|
|
#define SPI_T_PP_ENA (BIT(31))
|
|
#define SPI_T_PP_ENA_M (BIT(31))
|
|
#define SPI_T_PP_ENA_V 0x1
|
|
#define SPI_T_PP_ENA_S 31
|
|
/* SPI_T_PP_SHIFT : R/W ;bitpos:[19:16] ;default: 4'd10 ; */
|
|
/*description: page program delay time shift .*/
|
|
#define SPI_T_PP_SHIFT 0x0000000F
|
|
#define SPI_T_PP_SHIFT_M ((SPI_T_PP_SHIFT_V)<<(SPI_T_PP_SHIFT_S))
|
|
#define SPI_T_PP_SHIFT_V 0xF
|
|
#define SPI_T_PP_SHIFT_S 16
|
|
/* SPI_T_PP_TIME : R/W ;bitpos:[11:0] ;default: 12'd80 ; */
|
|
/*description: page program delay time by system clock.*/
|
|
#define SPI_T_PP_TIME 0x00000FFF
|
|
#define SPI_T_PP_TIME_M ((SPI_T_PP_TIME_V)<<(SPI_T_PP_TIME_S))
|
|
#define SPI_T_PP_TIME_V 0xFFF
|
|
#define SPI_T_PP_TIME_S 0
|
|
|
|
#define SPI_EXT1_REG(i) (REG_SPI_BASE(i) + 0xF4)
|
|
/* SPI_T_ERASE_ENA : R/W ;bitpos:[31] ;default: 1'b1 ; */
|
|
/*description: erase flash delay enable.*/
|
|
#define SPI_T_ERASE_ENA (BIT(31))
|
|
#define SPI_T_ERASE_ENA_M (BIT(31))
|
|
#define SPI_T_ERASE_ENA_V 0x1
|
|
#define SPI_T_ERASE_ENA_S 31
|
|
/* SPI_T_ERASE_SHIFT : R/W ;bitpos:[19:16] ;default: 4'd15 ; */
|
|
/*description: erase flash delay time shift.*/
|
|
#define SPI_T_ERASE_SHIFT 0x0000000F
|
|
#define SPI_T_ERASE_SHIFT_M ((SPI_T_ERASE_SHIFT_V)<<(SPI_T_ERASE_SHIFT_S))
|
|
#define SPI_T_ERASE_SHIFT_V 0xF
|
|
#define SPI_T_ERASE_SHIFT_S 16
|
|
/* SPI_T_ERASE_TIME : R/W ;bitpos:[11:0] ;default: 12'd0 ; */
|
|
/*description: erase flash delay time by system clock.*/
|
|
#define SPI_T_ERASE_TIME 0x00000FFF
|
|
#define SPI_T_ERASE_TIME_M ((SPI_T_ERASE_TIME_V)<<(SPI_T_ERASE_TIME_S))
|
|
#define SPI_T_ERASE_TIME_V 0xFFF
|
|
#define SPI_T_ERASE_TIME_S 0
|
|
|
|
#define SPI_EXT2_REG(i) (REG_SPI_BASE(i) + 0xF8)
|
|
/* SPI_ST : RO ;bitpos:[2:0] ;default: 3'b0 ; */
|
|
/*description: The status of spi state machine .*/
|
|
#define SPI_ST 0x00000007
|
|
#define SPI_ST_M ((SPI_ST_V)<<(SPI_ST_S))
|
|
#define SPI_ST_V 0x7
|
|
#define SPI_ST_S 0
|
|
|
|
#define SPI_EXT3_REG(i) (REG_SPI_BASE(i) + 0xFC)
|
|
/* SPI_INT_HOLD_ENA : R/W ;bitpos:[1:0] ;default: 2'b0 ; */
|
|
/*description: This register is for two SPI masters to share the same cs clock
|
|
and data signals. The bits of one SPI are set if the other SPI is busy the SPI will be hold. 1(3): hold at ¡°idle¡± phase 2: hold at ¡°prepare¡± phase.*/
|
|
#define SPI_INT_HOLD_ENA 0x00000003
|
|
#define SPI_INT_HOLD_ENA_M ((SPI_INT_HOLD_ENA_V)<<(SPI_INT_HOLD_ENA_S))
|
|
#define SPI_INT_HOLD_ENA_V 0x3
|
|
#define SPI_INT_HOLD_ENA_S 0
|
|
|
|
#define SPI_DMA_CONF_REG(i) (REG_SPI_BASE(i) + 0x100)
|
|
/* SPI_DMA_CONTINUE : R/W ;bitpos:[16] ;default: 1'b0 ; */
|
|
/*description: spi dma continue tx/rx data.*/
|
|
#define SPI_DMA_CONTINUE (BIT(16))
|
|
#define SPI_DMA_CONTINUE_M (BIT(16))
|
|
#define SPI_DMA_CONTINUE_V 0x1
|
|
#define SPI_DMA_CONTINUE_S 16
|
|
/* SPI_DMA_TX_STOP : R/W ;bitpos:[15] ;default: 1'b0 ; */
|
|
/*description: spi dma write data stop when in continue tx/rx mode.*/
|
|
#define SPI_DMA_TX_STOP (BIT(15))
|
|
#define SPI_DMA_TX_STOP_M (BIT(15))
|
|
#define SPI_DMA_TX_STOP_V 0x1
|
|
#define SPI_DMA_TX_STOP_S 15
|
|
/* SPI_DMA_RX_STOP : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
/*description: spi dma read data stop when in continue tx/rx mode.*/
|
|
#define SPI_DMA_RX_STOP (BIT(14))
|
|
#define SPI_DMA_RX_STOP_M (BIT(14))
|
|
#define SPI_DMA_RX_STOP_V 0x1
|
|
#define SPI_DMA_RX_STOP_S 14
|
|
/* SPI_OUT_DATA_BURST_EN : R/W ;bitpos:[12] ;default: 1'b0 ; */
|
|
/*description: spi dma read data from memory in burst mode.*/
|
|
#define SPI_OUT_DATA_BURST_EN (BIT(12))
|
|
#define SPI_OUT_DATA_BURST_EN_M (BIT(12))
|
|
#define SPI_OUT_DATA_BURST_EN_V 0x1
|
|
#define SPI_OUT_DATA_BURST_EN_S 12
|
|
/* SPI_INDSCR_BURST_EN : R/W ;bitpos:[11] ;default: 1'b0 ; */
|
|
/*description: read descriptor use burst mode when write data to memory.*/
|
|
#define SPI_INDSCR_BURST_EN (BIT(11))
|
|
#define SPI_INDSCR_BURST_EN_M (BIT(11))
|
|
#define SPI_INDSCR_BURST_EN_V 0x1
|
|
#define SPI_INDSCR_BURST_EN_S 11
|
|
/* SPI_OUTDSCR_BURST_EN : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
/*description: read descriptor use burst mode when read data for memory.*/
|
|
#define SPI_OUTDSCR_BURST_EN (BIT(10))
|
|
#define SPI_OUTDSCR_BURST_EN_M (BIT(10))
|
|
#define SPI_OUTDSCR_BURST_EN_V 0x1
|
|
#define SPI_OUTDSCR_BURST_EN_S 10
|
|
/* SPI_OUT_EOF_MODE : R/W ;bitpos:[9] ;default: 1'b1 ; */
|
|
/*description: out eof flag generation mode . 1: when dma pop all data from
|
|
fifo 0:when ahb push all data to fifo.*/
|
|
#define SPI_OUT_EOF_MODE (BIT(9))
|
|
#define SPI_OUT_EOF_MODE_M (BIT(9))
|
|
#define SPI_OUT_EOF_MODE_V 0x1
|
|
#define SPI_OUT_EOF_MODE_S 9
|
|
/* SPI_OUT_AUTO_WRBACK : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: when the link is empty jump to next automatically.*/
|
|
#define SPI_OUT_AUTO_WRBACK (BIT(8))
|
|
#define SPI_OUT_AUTO_WRBACK_M (BIT(8))
|
|
#define SPI_OUT_AUTO_WRBACK_V 0x1
|
|
#define SPI_OUT_AUTO_WRBACK_S 8
|
|
/* SPI_OUT_LOOP_TEST : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: Set bit to test out link.*/
|
|
#define SPI_OUT_LOOP_TEST (BIT(7))
|
|
#define SPI_OUT_LOOP_TEST_M (BIT(7))
|
|
#define SPI_OUT_LOOP_TEST_V 0x1
|
|
#define SPI_OUT_LOOP_TEST_S 7
|
|
/* SPI_IN_LOOP_TEST : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: Set bit to test in link.*/
|
|
#define SPI_IN_LOOP_TEST (BIT(6))
|
|
#define SPI_IN_LOOP_TEST_M (BIT(6))
|
|
#define SPI_IN_LOOP_TEST_V 0x1
|
|
#define SPI_IN_LOOP_TEST_S 6
|
|
/* SPI_AHBM_RST : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: reset spi dma ahb master.*/
|
|
#define SPI_AHBM_RST (BIT(5))
|
|
#define SPI_AHBM_RST_M (BIT(5))
|
|
#define SPI_AHBM_RST_V 0x1
|
|
#define SPI_AHBM_RST_S 5
|
|
/* SPI_AHBM_FIFO_RST : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: reset spi dma ahb master fifo pointer.*/
|
|
#define SPI_AHBM_FIFO_RST (BIT(4))
|
|
#define SPI_AHBM_FIFO_RST_M (BIT(4))
|
|
#define SPI_AHBM_FIFO_RST_V 0x1
|
|
#define SPI_AHBM_FIFO_RST_S 4
|
|
/* SPI_OUT_RST : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The bit is used to reset out dma fsm and out data fifo pointer.*/
|
|
#define SPI_OUT_RST (BIT(3))
|
|
#define SPI_OUT_RST_M (BIT(3))
|
|
#define SPI_OUT_RST_V 0x1
|
|
#define SPI_OUT_RST_S 3
|
|
/* SPI_IN_RST : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The bit is used to reset in dma fsm and in data fifo pointer.*/
|
|
#define SPI_IN_RST (BIT(2))
|
|
#define SPI_IN_RST_M (BIT(2))
|
|
#define SPI_IN_RST_V 0x1
|
|
#define SPI_IN_RST_S 2
|
|
|
|
#define SPI_DMA_OUT_LINK_REG(i) (REG_SPI_BASE(i) + 0x104)
|
|
/* SPI_OUTLINK_RESTART : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: Set the bit to mount on new outlink descriptors.*/
|
|
#define SPI_OUTLINK_RESTART (BIT(30))
|
|
#define SPI_OUTLINK_RESTART_M (BIT(30))
|
|
#define SPI_OUTLINK_RESTART_V 0x1
|
|
#define SPI_OUTLINK_RESTART_S 30
|
|
/* SPI_OUTLINK_START : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: Set the bit to start to use outlink descriptor.*/
|
|
#define SPI_OUTLINK_START (BIT(29))
|
|
#define SPI_OUTLINK_START_M (BIT(29))
|
|
#define SPI_OUTLINK_START_V 0x1
|
|
#define SPI_OUTLINK_START_S 29
|
|
/* SPI_OUTLINK_STOP : R/W ;bitpos:[28] ;default: 1'b0 ; */
|
|
/*description: Set the bit to stop to use outlink descriptor.*/
|
|
#define SPI_OUTLINK_STOP (BIT(28))
|
|
#define SPI_OUTLINK_STOP_M (BIT(28))
|
|
#define SPI_OUTLINK_STOP_V 0x1
|
|
#define SPI_OUTLINK_STOP_S 28
|
|
/* SPI_OUTLINK_ADDR : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
|
|
/*description: The address of the first outlink descriptor.*/
|
|
#define SPI_OUTLINK_ADDR 0x000FFFFF
|
|
#define SPI_OUTLINK_ADDR_M ((SPI_OUTLINK_ADDR_V)<<(SPI_OUTLINK_ADDR_S))
|
|
#define SPI_OUTLINK_ADDR_V 0xFFFFF
|
|
#define SPI_OUTLINK_ADDR_S 0
|
|
|
|
#define SPI_DMA_IN_LINK_REG(i) (REG_SPI_BASE(i) + 0x108)
|
|
/* SPI_INLINK_RESTART : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: Set the bit to mount on new inlink descriptors.*/
|
|
#define SPI_INLINK_RESTART (BIT(30))
|
|
#define SPI_INLINK_RESTART_M (BIT(30))
|
|
#define SPI_INLINK_RESTART_V 0x1
|
|
#define SPI_INLINK_RESTART_S 30
|
|
/* SPI_INLINK_START : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: Set the bit to start to use inlink descriptor.*/
|
|
#define SPI_INLINK_START (BIT(29))
|
|
#define SPI_INLINK_START_M (BIT(29))
|
|
#define SPI_INLINK_START_V 0x1
|
|
#define SPI_INLINK_START_S 29
|
|
/* SPI_INLINK_STOP : R/W ;bitpos:[28] ;default: 1'b0 ; */
|
|
/*description: Set the bit to stop to use inlink descriptor.*/
|
|
#define SPI_INLINK_STOP (BIT(28))
|
|
#define SPI_INLINK_STOP_M (BIT(28))
|
|
#define SPI_INLINK_STOP_V 0x1
|
|
#define SPI_INLINK_STOP_S 28
|
|
/* SPI_INLINK_AUTO_RET : R/W ;bitpos:[20] ;default: 1'b0 ; */
|
|
/*description: when the bit is set inlink descriptor returns to the next descriptor
|
|
while a packet is wrong*/
|
|
#define SPI_INLINK_AUTO_RET (BIT(20))
|
|
#define SPI_INLINK_AUTO_RET_M (BIT(20))
|
|
#define SPI_INLINK_AUTO_RET_V 0x1
|
|
#define SPI_INLINK_AUTO_RET_S 20
|
|
/* SPI_INLINK_ADDR : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
|
|
/*description: The address of the first inlink descriptor.*/
|
|
#define SPI_INLINK_ADDR 0x000FFFFF
|
|
#define SPI_INLINK_ADDR_M ((SPI_INLINK_ADDR_V)<<(SPI_INLINK_ADDR_S))
|
|
#define SPI_INLINK_ADDR_V 0xFFFFF
|
|
#define SPI_INLINK_ADDR_S 0
|
|
|
|
#define SPI_DMA_STATUS_REG(i) (REG_SPI_BASE(i) + 0x10C)
|
|
/* SPI_DMA_TX_EN : RO ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: spi dma write data status bit.*/
|
|
#define SPI_DMA_TX_EN (BIT(1))
|
|
#define SPI_DMA_TX_EN_M (BIT(1))
|
|
#define SPI_DMA_TX_EN_V 0x1
|
|
#define SPI_DMA_TX_EN_S 1
|
|
/* SPI_DMA_RX_EN : RO ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: spi dma read data status bit.*/
|
|
#define SPI_DMA_RX_EN (BIT(0))
|
|
#define SPI_DMA_RX_EN_M (BIT(0))
|
|
#define SPI_DMA_RX_EN_V 0x1
|
|
#define SPI_DMA_RX_EN_S 0
|
|
|
|
#define SPI_DMA_INT_ENA_REG(i) (REG_SPI_BASE(i) + 0x110)
|
|
/* SPI_OUT_TOTAL_EOF_INT_ENA : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: The enable bit for sending all the packets to host done.*/
|
|
#define SPI_OUT_TOTAL_EOF_INT_ENA (BIT(8))
|
|
#define SPI_OUT_TOTAL_EOF_INT_ENA_M (BIT(8))
|
|
#define SPI_OUT_TOTAL_EOF_INT_ENA_V 0x1
|
|
#define SPI_OUT_TOTAL_EOF_INT_ENA_S 8
|
|
/* SPI_OUT_EOF_INT_ENA : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: The enable bit for sending a packet to host done.*/
|
|
#define SPI_OUT_EOF_INT_ENA (BIT(7))
|
|
#define SPI_OUT_EOF_INT_ENA_M (BIT(7))
|
|
#define SPI_OUT_EOF_INT_ENA_V 0x1
|
|
#define SPI_OUT_EOF_INT_ENA_S 7
|
|
/* SPI_OUT_DONE_INT_ENA : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: The enable bit for completing usage of a outlink descriptor .*/
|
|
#define SPI_OUT_DONE_INT_ENA (BIT(6))
|
|
#define SPI_OUT_DONE_INT_ENA_M (BIT(6))
|
|
#define SPI_OUT_DONE_INT_ENA_V 0x1
|
|
#define SPI_OUT_DONE_INT_ENA_S 6
|
|
/* SPI_IN_SUC_EOF_INT_ENA : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: The enable bit for completing receiving all the packets from host.*/
|
|
#define SPI_IN_SUC_EOF_INT_ENA (BIT(5))
|
|
#define SPI_IN_SUC_EOF_INT_ENA_M (BIT(5))
|
|
#define SPI_IN_SUC_EOF_INT_ENA_V 0x1
|
|
#define SPI_IN_SUC_EOF_INT_ENA_S 5
|
|
/* SPI_IN_ERR_EOF_INT_ENA : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The enable bit for receiving error.*/
|
|
#define SPI_IN_ERR_EOF_INT_ENA (BIT(4))
|
|
#define SPI_IN_ERR_EOF_INT_ENA_M (BIT(4))
|
|
#define SPI_IN_ERR_EOF_INT_ENA_V 0x1
|
|
#define SPI_IN_ERR_EOF_INT_ENA_S 4
|
|
/* SPI_IN_DONE_INT_ENA : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The enable bit for completing usage of a inlink descriptor.*/
|
|
#define SPI_IN_DONE_INT_ENA (BIT(3))
|
|
#define SPI_IN_DONE_INT_ENA_M (BIT(3))
|
|
#define SPI_IN_DONE_INT_ENA_V 0x1
|
|
#define SPI_IN_DONE_INT_ENA_S 3
|
|
/* SPI_INLINK_DSCR_ERROR_INT_ENA : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The enable bit for inlink descriptor error.*/
|
|
#define SPI_INLINK_DSCR_ERROR_INT_ENA (BIT(2))
|
|
#define SPI_INLINK_DSCR_ERROR_INT_ENA_M (BIT(2))
|
|
#define SPI_INLINK_DSCR_ERROR_INT_ENA_V 0x1
|
|
#define SPI_INLINK_DSCR_ERROR_INT_ENA_S 2
|
|
/* SPI_OUTLINK_DSCR_ERROR_INT_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The enable bit for outlink descriptor error.*/
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_ENA (BIT(1))
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_ENA_M (BIT(1))
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_ENA_V 0x1
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_ENA_S 1
|
|
/* SPI_INLINK_DSCR_EMPTY_INT_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: The enable bit for lack of enough inlink descriptors.*/
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_ENA (BIT(0))
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_ENA_M (BIT(0))
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_ENA_V 0x1
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_ENA_S 0
|
|
|
|
#define SPI_DMA_INT_RAW_REG(i) (REG_SPI_BASE(i) + 0x114)
|
|
/* SPI_OUT_TOTAL_EOF_INT_RAW : RO ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: The raw bit for sending all the packets to host done.*/
|
|
#define SPI_OUT_TOTAL_EOF_INT_RAW (BIT(8))
|
|
#define SPI_OUT_TOTAL_EOF_INT_RAW_M (BIT(8))
|
|
#define SPI_OUT_TOTAL_EOF_INT_RAW_V 0x1
|
|
#define SPI_OUT_TOTAL_EOF_INT_RAW_S 8
|
|
/* SPI_OUT_EOF_INT_RAW : RO ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: The raw bit for sending a packet to host done.*/
|
|
#define SPI_OUT_EOF_INT_RAW (BIT(7))
|
|
#define SPI_OUT_EOF_INT_RAW_M (BIT(7))
|
|
#define SPI_OUT_EOF_INT_RAW_V 0x1
|
|
#define SPI_OUT_EOF_INT_RAW_S 7
|
|
/* SPI_OUT_DONE_INT_RAW : RO ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: The raw bit for completing usage of a outlink descriptor.*/
|
|
#define SPI_OUT_DONE_INT_RAW (BIT(6))
|
|
#define SPI_OUT_DONE_INT_RAW_M (BIT(6))
|
|
#define SPI_OUT_DONE_INT_RAW_V 0x1
|
|
#define SPI_OUT_DONE_INT_RAW_S 6
|
|
/* SPI_IN_SUC_EOF_INT_RAW : RO ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: The raw bit for completing receiving all the packets from host.*/
|
|
#define SPI_IN_SUC_EOF_INT_RAW (BIT(5))
|
|
#define SPI_IN_SUC_EOF_INT_RAW_M (BIT(5))
|
|
#define SPI_IN_SUC_EOF_INT_RAW_V 0x1
|
|
#define SPI_IN_SUC_EOF_INT_RAW_S 5
|
|
/* SPI_IN_ERR_EOF_INT_RAW : RO ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The raw bit for receiving error.*/
|
|
#define SPI_IN_ERR_EOF_INT_RAW (BIT(4))
|
|
#define SPI_IN_ERR_EOF_INT_RAW_M (BIT(4))
|
|
#define SPI_IN_ERR_EOF_INT_RAW_V 0x1
|
|
#define SPI_IN_ERR_EOF_INT_RAW_S 4
|
|
/* SPI_IN_DONE_INT_RAW : RO ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The raw bit for completing usage of a inlink descriptor.*/
|
|
#define SPI_IN_DONE_INT_RAW (BIT(3))
|
|
#define SPI_IN_DONE_INT_RAW_M (BIT(3))
|
|
#define SPI_IN_DONE_INT_RAW_V 0x1
|
|
#define SPI_IN_DONE_INT_RAW_S 3
|
|
/* SPI_INLINK_DSCR_ERROR_INT_RAW : RO ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The raw bit for inlink descriptor error.*/
|
|
#define SPI_INLINK_DSCR_ERROR_INT_RAW (BIT(2))
|
|
#define SPI_INLINK_DSCR_ERROR_INT_RAW_M (BIT(2))
|
|
#define SPI_INLINK_DSCR_ERROR_INT_RAW_V 0x1
|
|
#define SPI_INLINK_DSCR_ERROR_INT_RAW_S 2
|
|
/* SPI_OUTLINK_DSCR_ERROR_INT_RAW : RO ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The raw bit for outlink descriptor error.*/
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_RAW (BIT(1))
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_RAW_M (BIT(1))
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_RAW_V 0x1
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_RAW_S 1
|
|
/* SPI_INLINK_DSCR_EMPTY_INT_RAW : RO ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: The raw bit for lack of enough inlink descriptors.*/
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_RAW (BIT(0))
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_RAW_M (BIT(0))
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_RAW_V 0x1
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_RAW_S 0
|
|
|
|
#define SPI_DMA_INT_ST_REG(i) (REG_SPI_BASE(i) + 0x118)
|
|
/* SPI_OUT_TOTAL_EOF_INT_ST : RO ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: The status bit for sending all the packets to host done.*/
|
|
#define SPI_OUT_TOTAL_EOF_INT_ST (BIT(8))
|
|
#define SPI_OUT_TOTAL_EOF_INT_ST_M (BIT(8))
|
|
#define SPI_OUT_TOTAL_EOF_INT_ST_V 0x1
|
|
#define SPI_OUT_TOTAL_EOF_INT_ST_S 8
|
|
/* SPI_OUT_EOF_INT_ST : RO ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: The status bit for sending a packet to host done.*/
|
|
#define SPI_OUT_EOF_INT_ST (BIT(7))
|
|
#define SPI_OUT_EOF_INT_ST_M (BIT(7))
|
|
#define SPI_OUT_EOF_INT_ST_V 0x1
|
|
#define SPI_OUT_EOF_INT_ST_S 7
|
|
/* SPI_OUT_DONE_INT_ST : RO ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: The status bit for completing usage of a outlink descriptor.*/
|
|
#define SPI_OUT_DONE_INT_ST (BIT(6))
|
|
#define SPI_OUT_DONE_INT_ST_M (BIT(6))
|
|
#define SPI_OUT_DONE_INT_ST_V 0x1
|
|
#define SPI_OUT_DONE_INT_ST_S 6
|
|
/* SPI_IN_SUC_EOF_INT_ST : RO ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: The status bit for completing receiving all the packets from host.*/
|
|
#define SPI_IN_SUC_EOF_INT_ST (BIT(5))
|
|
#define SPI_IN_SUC_EOF_INT_ST_M (BIT(5))
|
|
#define SPI_IN_SUC_EOF_INT_ST_V 0x1
|
|
#define SPI_IN_SUC_EOF_INT_ST_S 5
|
|
/* SPI_IN_ERR_EOF_INT_ST : RO ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The status bit for receiving error.*/
|
|
#define SPI_IN_ERR_EOF_INT_ST (BIT(4))
|
|
#define SPI_IN_ERR_EOF_INT_ST_M (BIT(4))
|
|
#define SPI_IN_ERR_EOF_INT_ST_V 0x1
|
|
#define SPI_IN_ERR_EOF_INT_ST_S 4
|
|
/* SPI_IN_DONE_INT_ST : RO ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The status bit for completing usage of a inlink descriptor.*/
|
|
#define SPI_IN_DONE_INT_ST (BIT(3))
|
|
#define SPI_IN_DONE_INT_ST_M (BIT(3))
|
|
#define SPI_IN_DONE_INT_ST_V 0x1
|
|
#define SPI_IN_DONE_INT_ST_S 3
|
|
/* SPI_INLINK_DSCR_ERROR_INT_ST : RO ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The status bit for inlink descriptor error.*/
|
|
#define SPI_INLINK_DSCR_ERROR_INT_ST (BIT(2))
|
|
#define SPI_INLINK_DSCR_ERROR_INT_ST_M (BIT(2))
|
|
#define SPI_INLINK_DSCR_ERROR_INT_ST_V 0x1
|
|
#define SPI_INLINK_DSCR_ERROR_INT_ST_S 2
|
|
/* SPI_OUTLINK_DSCR_ERROR_INT_ST : RO ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The status bit for outlink descriptor error.*/
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_ST (BIT(1))
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_ST_M (BIT(1))
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_ST_V 0x1
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_ST_S 1
|
|
/* SPI_INLINK_DSCR_EMPTY_INT_ST : RO ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: The status bit for lack of enough inlink descriptors.*/
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_ST (BIT(0))
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_ST_M (BIT(0))
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_ST_V 0x1
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_ST_S 0
|
|
|
|
#define SPI_DMA_INT_CLR_REG(i) (REG_SPI_BASE(i) + 0x11C)
|
|
/* SPI_OUT_TOTAL_EOF_INT_CLR : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: The clear bit for sending all the packets to host done.*/
|
|
#define SPI_OUT_TOTAL_EOF_INT_CLR (BIT(8))
|
|
#define SPI_OUT_TOTAL_EOF_INT_CLR_M (BIT(8))
|
|
#define SPI_OUT_TOTAL_EOF_INT_CLR_V 0x1
|
|
#define SPI_OUT_TOTAL_EOF_INT_CLR_S 8
|
|
/* SPI_OUT_EOF_INT_CLR : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: The clear bit for sending a packet to host done.*/
|
|
#define SPI_OUT_EOF_INT_CLR (BIT(7))
|
|
#define SPI_OUT_EOF_INT_CLR_M (BIT(7))
|
|
#define SPI_OUT_EOF_INT_CLR_V 0x1
|
|
#define SPI_OUT_EOF_INT_CLR_S 7
|
|
/* SPI_OUT_DONE_INT_CLR : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: The clear bit for completing usage of a outlink descriptor.*/
|
|
#define SPI_OUT_DONE_INT_CLR (BIT(6))
|
|
#define SPI_OUT_DONE_INT_CLR_M (BIT(6))
|
|
#define SPI_OUT_DONE_INT_CLR_V 0x1
|
|
#define SPI_OUT_DONE_INT_CLR_S 6
|
|
/* SPI_IN_SUC_EOF_INT_CLR : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: The clear bit for completing receiving all the packets from host.*/
|
|
#define SPI_IN_SUC_EOF_INT_CLR (BIT(5))
|
|
#define SPI_IN_SUC_EOF_INT_CLR_M (BIT(5))
|
|
#define SPI_IN_SUC_EOF_INT_CLR_V 0x1
|
|
#define SPI_IN_SUC_EOF_INT_CLR_S 5
|
|
/* SPI_IN_ERR_EOF_INT_CLR : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The clear bit for receiving error.*/
|
|
#define SPI_IN_ERR_EOF_INT_CLR (BIT(4))
|
|
#define SPI_IN_ERR_EOF_INT_CLR_M (BIT(4))
|
|
#define SPI_IN_ERR_EOF_INT_CLR_V 0x1
|
|
#define SPI_IN_ERR_EOF_INT_CLR_S 4
|
|
/* SPI_IN_DONE_INT_CLR : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The clear bit for completing usage of a inlink descriptor.*/
|
|
#define SPI_IN_DONE_INT_CLR (BIT(3))
|
|
#define SPI_IN_DONE_INT_CLR_M (BIT(3))
|
|
#define SPI_IN_DONE_INT_CLR_V 0x1
|
|
#define SPI_IN_DONE_INT_CLR_S 3
|
|
/* SPI_INLINK_DSCR_ERROR_INT_CLR : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The clear bit for inlink descriptor error.*/
|
|
#define SPI_INLINK_DSCR_ERROR_INT_CLR (BIT(2))
|
|
#define SPI_INLINK_DSCR_ERROR_INT_CLR_M (BIT(2))
|
|
#define SPI_INLINK_DSCR_ERROR_INT_CLR_V 0x1
|
|
#define SPI_INLINK_DSCR_ERROR_INT_CLR_S 2
|
|
/* SPI_OUTLINK_DSCR_ERROR_INT_CLR : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The clear bit for outlink descriptor error.*/
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_CLR (BIT(1))
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_CLR_M (BIT(1))
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_CLR_V 0x1
|
|
#define SPI_OUTLINK_DSCR_ERROR_INT_CLR_S 1
|
|
/* SPI_INLINK_DSCR_EMPTY_INT_CLR : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: The clear bit for lack of enough inlink descriptors.*/
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_CLR (BIT(0))
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_CLR_M (BIT(0))
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_CLR_V 0x1
|
|
#define SPI_INLINK_DSCR_EMPTY_INT_CLR_S 0
|
|
|
|
#define SPI_IN_ERR_EOF_DES_ADDR_REG(i) (REG_SPI_BASE(i) + 0x120)
|
|
/* SPI_DMA_IN_ERR_EOF_DES_ADDR : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The inlink descriptor address when spi dma produce receiving error.*/
|
|
#define SPI_DMA_IN_ERR_EOF_DES_ADDR 0xFFFFFFFF
|
|
#define SPI_DMA_IN_ERR_EOF_DES_ADDR_M ((SPI_DMA_IN_ERR_EOF_DES_ADDR_V)<<(SPI_DMA_IN_ERR_EOF_DES_ADDR_S))
|
|
#define SPI_DMA_IN_ERR_EOF_DES_ADDR_V 0xFFFFFFFF
|
|
#define SPI_DMA_IN_ERR_EOF_DES_ADDR_S 0
|
|
|
|
#define SPI_IN_SUC_EOF_DES_ADDR_REG(i) (REG_SPI_BASE(i) + 0x124)
|
|
/* SPI_DMA_IN_SUC_EOF_DES_ADDR : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The last inlink descriptor address when spi dma produce from_suc_eof.*/
|
|
#define SPI_DMA_IN_SUC_EOF_DES_ADDR 0xFFFFFFFF
|
|
#define SPI_DMA_IN_SUC_EOF_DES_ADDR_M ((SPI_DMA_IN_SUC_EOF_DES_ADDR_V)<<(SPI_DMA_IN_SUC_EOF_DES_ADDR_S))
|
|
#define SPI_DMA_IN_SUC_EOF_DES_ADDR_V 0xFFFFFFFF
|
|
#define SPI_DMA_IN_SUC_EOF_DES_ADDR_S 0
|
|
|
|
#define SPI_INLINK_DSCR_REG(i) (REG_SPI_BASE(i) + 0x128)
|
|
/* SPI_DMA_INLINK_DSCR : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The content of current in descriptor pointer.*/
|
|
#define SPI_DMA_INLINK_DSCR 0xFFFFFFFF
|
|
#define SPI_DMA_INLINK_DSCR_M ((SPI_DMA_INLINK_DSCR_V)<<(SPI_DMA_INLINK_DSCR_S))
|
|
#define SPI_DMA_INLINK_DSCR_V 0xFFFFFFFF
|
|
#define SPI_DMA_INLINK_DSCR_S 0
|
|
|
|
#define SPI_INLINK_DSCR_BF0_REG(i) (REG_SPI_BASE(i) + 0x12C)
|
|
/* SPI_DMA_INLINK_DSCR_BF0 : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The content of next in descriptor pointer.*/
|
|
#define SPI_DMA_INLINK_DSCR_BF0 0xFFFFFFFF
|
|
#define SPI_DMA_INLINK_DSCR_BF0_M ((SPI_DMA_INLINK_DSCR_BF0_V)<<(SPI_DMA_INLINK_DSCR_BF0_S))
|
|
#define SPI_DMA_INLINK_DSCR_BF0_V 0xFFFFFFFF
|
|
#define SPI_DMA_INLINK_DSCR_BF0_S 0
|
|
|
|
#define SPI_INLINK_DSCR_BF1_REG(i) (REG_SPI_BASE(i) + 0x130)
|
|
/* SPI_DMA_INLINK_DSCR_BF1 : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The content of current in descriptor data buffer pointer.*/
|
|
#define SPI_DMA_INLINK_DSCR_BF1 0xFFFFFFFF
|
|
#define SPI_DMA_INLINK_DSCR_BF1_M ((SPI_DMA_INLINK_DSCR_BF1_V)<<(SPI_DMA_INLINK_DSCR_BF1_S))
|
|
#define SPI_DMA_INLINK_DSCR_BF1_V 0xFFFFFFFF
|
|
#define SPI_DMA_INLINK_DSCR_BF1_S 0
|
|
|
|
#define SPI_OUT_EOF_BFR_DES_ADDR_REG(i) (REG_SPI_BASE(i) + 0x134)
|
|
/* SPI_DMA_OUT_EOF_BFR_DES_ADDR : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The address of buffer relative to the outlink descriptor that produce eof.*/
|
|
#define SPI_DMA_OUT_EOF_BFR_DES_ADDR 0xFFFFFFFF
|
|
#define SPI_DMA_OUT_EOF_BFR_DES_ADDR_M ((SPI_DMA_OUT_EOF_BFR_DES_ADDR_V)<<(SPI_DMA_OUT_EOF_BFR_DES_ADDR_S))
|
|
#define SPI_DMA_OUT_EOF_BFR_DES_ADDR_V 0xFFFFFFFF
|
|
#define SPI_DMA_OUT_EOF_BFR_DES_ADDR_S 0
|
|
|
|
#define SPI_OUT_EOF_DES_ADDR_REG(i) (REG_SPI_BASE(i) + 0x138)
|
|
/* SPI_DMA_OUT_EOF_DES_ADDR : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The last outlink descriptor address when spi dma produce to_eof.*/
|
|
#define SPI_DMA_OUT_EOF_DES_ADDR 0xFFFFFFFF
|
|
#define SPI_DMA_OUT_EOF_DES_ADDR_M ((SPI_DMA_OUT_EOF_DES_ADDR_V)<<(SPI_DMA_OUT_EOF_DES_ADDR_S))
|
|
#define SPI_DMA_OUT_EOF_DES_ADDR_V 0xFFFFFFFF
|
|
#define SPI_DMA_OUT_EOF_DES_ADDR_S 0
|
|
|
|
#define SPI_OUTLINK_DSCR_REG(i) (REG_SPI_BASE(i) + 0x13C)
|
|
/* SPI_DMA_OUTLINK_DSCR : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The content of current out descriptor pointer.*/
|
|
#define SPI_DMA_OUTLINK_DSCR 0xFFFFFFFF
|
|
#define SPI_DMA_OUTLINK_DSCR_M ((SPI_DMA_OUTLINK_DSCR_V)<<(SPI_DMA_OUTLINK_DSCR_S))
|
|
#define SPI_DMA_OUTLINK_DSCR_V 0xFFFFFFFF
|
|
#define SPI_DMA_OUTLINK_DSCR_S 0
|
|
|
|
#define SPI_OUTLINK_DSCR_BF0_REG(i) (REG_SPI_BASE(i) + 0x140)
|
|
/* SPI_DMA_OUTLINK_DSCR_BF0 : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The content of next out descriptor pointer.*/
|
|
#define SPI_DMA_OUTLINK_DSCR_BF0 0xFFFFFFFF
|
|
#define SPI_DMA_OUTLINK_DSCR_BF0_M ((SPI_DMA_OUTLINK_DSCR_BF0_V)<<(SPI_DMA_OUTLINK_DSCR_BF0_S))
|
|
#define SPI_DMA_OUTLINK_DSCR_BF0_V 0xFFFFFFFF
|
|
#define SPI_DMA_OUTLINK_DSCR_BF0_S 0
|
|
|
|
#define SPI_OUTLINK_DSCR_BF1_REG(i) (REG_SPI_BASE(i) + 0x144)
|
|
/* SPI_DMA_OUTLINK_DSCR_BF1 : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: The content of current out descriptor data buffer pointer.*/
|
|
#define SPI_DMA_OUTLINK_DSCR_BF1 0xFFFFFFFF
|
|
#define SPI_DMA_OUTLINK_DSCR_BF1_M ((SPI_DMA_OUTLINK_DSCR_BF1_V)<<(SPI_DMA_OUTLINK_DSCR_BF1_S))
|
|
#define SPI_DMA_OUTLINK_DSCR_BF1_V 0xFFFFFFFF
|
|
#define SPI_DMA_OUTLINK_DSCR_BF1_S 0
|
|
|
|
#define SPI_DMA_RSTATUS_REG(i) (REG_SPI_BASE(i) + 0x148)
|
|
/* SPI_DMA_OUT_STATUS : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: spi dma read data from memory status.*/
|
|
#define SPI_DMA_OUT_STATUS 0xFFFFFFFF
|
|
#define SPI_DMA_OUT_STATUS_M ((SPI_DMA_OUT_STATUS_V)<<(SPI_DMA_OUT_STATUS_S))
|
|
#define SPI_DMA_OUT_STATUS_V 0xFFFFFFFF
|
|
#define SPI_DMA_OUT_STATUS_S 0
|
|
|
|
#define SPI_DMA_TSTATUS_REG(i) (REG_SPI_BASE(i) + 0x14C)
|
|
/* SPI_DMA_IN_STATUS : RO ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: spi dma write data to memory status.*/
|
|
#define SPI_DMA_IN_STATUS 0xFFFFFFFF
|
|
#define SPI_DMA_IN_STATUS_M ((SPI_DMA_IN_STATUS_V)<<(SPI_DMA_IN_STATUS_S))
|
|
#define SPI_DMA_IN_STATUS_V 0xFFFFFFFF
|
|
#define SPI_DMA_IN_STATUS_S 0
|
|
|
|
#define SPI_DATE_REG(i) (REG_SPI_BASE(i) + 0x3FC)
|
|
/* SPI_DATE : RO ;bitpos:[27:0] ;default: 32'h1604270 ; */
|
|
/*description: SPI register version.*/
|
|
#define SPI_DATE 0x0FFFFFFF
|
|
#define SPI_DATE_M ((SPI_DATE_V)<<(SPI_DATE_S))
|
|
#define SPI_DATE_V 0xFFFFFFF
|
|
#define SPI_DATE_S 0
|
|
|
|
|
|
|
|
|
|
#endif /*__SPI_REG_H__ */
|
|
|
|
|