Add support for get write protection support, fixed the duplicated set_write_protection link. All the write_protection check in the top layer are removed. The lower levels (chip) should ensure to disable write protection before the operation start.
413 lines
13 KiB
C
413 lines
13 KiB
C
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#include <stdlib.h>
|
|
#include <sys/param.h> // For MIN/MAX
|
|
#include "spi_flash_chip_generic.h"
|
|
#include "spi_flash_defs.h"
|
|
#include "esp_log.h"
|
|
|
|
static const char TAG[] = "chip_generic";
|
|
|
|
#define SPI_FLASH_GENERIC_CHIP_ERASE_TIMEOUT 4000
|
|
#define SPI_FLASH_GENERIC_SECTOR_ERASE_TIMEOUT 500
|
|
#define SPI_FLASH_GENERIC_BLOCK_ERASE_TIMEOUT 1000
|
|
|
|
#define DEFAULT_IDLE_TIMEOUT 200
|
|
#define DEFAULT_PAGE_PROGRAM_TIMEOUT 500
|
|
|
|
esp_err_t spi_flash_chip_generic_probe(esp_flash_t *chip, uint32_t flash_id)
|
|
{
|
|
// This is the catch-all probe function, claim the chip always if nothing
|
|
// else has claimed it yet.
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_generic_reset(esp_flash_t *chip)
|
|
{
|
|
//this is written following the winbond spec..
|
|
spi_flash_trans_t t;
|
|
t = (spi_flash_trans_t) {
|
|
.command = CMD_RST_EN,
|
|
};
|
|
esp_err_t err = chip->host->common_command(chip->host, &t);
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
|
|
t = (spi_flash_trans_t) {
|
|
.command = CMD_RST_DEV,
|
|
};
|
|
err = chip->host->common_command(chip->host, &t);
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
|
|
err = chip->chip_drv->wait_idle(chip, DEFAULT_IDLE_TIMEOUT);
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_generic_detect_size(esp_flash_t *chip, uint32_t *size)
|
|
{
|
|
uint32_t id = 0;
|
|
*size = 0;
|
|
esp_err_t err = chip->host->read_id(chip->host, &id);
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
|
|
/* Can't detect size unless the high byte of the product ID matches the same convention, which is usually 0x40 or
|
|
* 0xC0 or similar. */
|
|
if ((id & 0x0F00) != 0) {
|
|
return ESP_ERR_FLASH_UNSUPPORTED_CHIP;
|
|
}
|
|
|
|
*size = 1 << (id & 0xFF);
|
|
return ESP_OK;
|
|
}
|
|
|
|
|
|
esp_err_t spi_flash_chip_generic_erase_chip(esp_flash_t *chip)
|
|
{
|
|
esp_err_t err;
|
|
|
|
err = chip->chip_drv->set_chip_write_protect(chip, false);
|
|
if (err == ESP_OK) {
|
|
err = chip->chip_drv->wait_idle(chip, DEFAULT_IDLE_TIMEOUT);
|
|
}
|
|
if (err == ESP_OK) {
|
|
chip->host->erase_chip(chip->host);
|
|
//to save time, flush cache here
|
|
if (chip->host->flush_cache) {
|
|
err = chip->host->flush_cache(chip->host, 0, chip->size);
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
}
|
|
err = chip->chip_drv->wait_idle(chip, SPI_FLASH_GENERIC_CHIP_ERASE_TIMEOUT);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_generic_erase_sector(esp_flash_t *chip, uint32_t start_address)
|
|
{
|
|
esp_err_t err = chip->chip_drv->set_chip_write_protect(chip, false);
|
|
if (err == ESP_OK) {
|
|
err = chip->chip_drv->wait_idle(chip, DEFAULT_IDLE_TIMEOUT);
|
|
}
|
|
if (err == ESP_OK) {
|
|
chip->host->erase_sector(chip->host, start_address);
|
|
//to save time, flush cache here
|
|
if (chip->host->flush_cache) {
|
|
err = chip->host->flush_cache(chip->host, start_address, chip->chip_drv->sector_size);
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
}
|
|
err = chip->chip_drv->wait_idle(chip, SPI_FLASH_GENERIC_SECTOR_ERASE_TIMEOUT);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_generic_erase_block(esp_flash_t *chip, uint32_t start_address)
|
|
{
|
|
esp_err_t err = chip->chip_drv->set_chip_write_protect(chip, false);
|
|
if (err == ESP_OK) {
|
|
err = chip->chip_drv->wait_idle(chip, DEFAULT_IDLE_TIMEOUT);
|
|
}
|
|
if (err == ESP_OK) {
|
|
chip->host->erase_block(chip->host, start_address);
|
|
//to save time, flush cache here
|
|
if (chip->host->flush_cache) {
|
|
err = chip->host->flush_cache(chip->host, start_address, chip->chip_drv->block_erase_size);
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
}
|
|
err = chip->chip_drv->wait_idle(chip, SPI_FLASH_GENERIC_BLOCK_ERASE_TIMEOUT);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_generic_read(esp_flash_t *chip, void *buffer, uint32_t address, uint32_t length)
|
|
{
|
|
esp_err_t err = ESP_OK;
|
|
// Configure the host, and return
|
|
spi_flash_chip_generic_config_host_read_mode(chip);
|
|
|
|
while (err == ESP_OK && length > 0) {
|
|
uint32_t read_len = MIN(length, chip->host->max_read_bytes);
|
|
err = chip->host->read(chip->host, buffer, address, read_len);
|
|
|
|
buffer += read_len;
|
|
length -= read_len;
|
|
address += read_len;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_generic_page_program(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length)
|
|
{
|
|
esp_err_t err;
|
|
|
|
err = chip->chip_drv->wait_idle(chip, DEFAULT_IDLE_TIMEOUT);
|
|
|
|
if (err == ESP_OK) {
|
|
// Perform the actual Page Program command
|
|
chip->host->program_page(chip->host, buffer, address, length);
|
|
|
|
err = chip->chip_drv->wait_idle(chip, DEFAULT_PAGE_PROGRAM_TIMEOUT);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_generic_write(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length)
|
|
{
|
|
esp_err_t err = ESP_OK;
|
|
const uint32_t page_size = chip->chip_drv->page_size;
|
|
|
|
while (err == ESP_OK && length > 0) {
|
|
uint32_t page_len = MIN(chip->host->max_write_bytes, MIN(page_size, length));
|
|
if ((address + page_len) / page_size != address / page_size) {
|
|
// Most flash chips can't page write across a page boundary
|
|
page_len = page_size - (address % page_size);
|
|
}
|
|
|
|
err = chip->chip_drv->set_chip_write_protect(chip, false);
|
|
|
|
if (err == ESP_OK) {
|
|
err = chip->chip_drv->program_page(chip, buffer, address, page_len);
|
|
address += page_len;
|
|
buffer = (void *)((intptr_t)buffer + page_len);
|
|
length -= page_len;
|
|
}
|
|
}
|
|
if (err == ESP_OK && chip->host->flush_cache) {
|
|
err = chip->host->flush_cache(chip->host, address, length);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_generic_write_encrypted(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length)
|
|
{
|
|
return ESP_ERR_FLASH_UNSUPPORTED_HOST; // TODO
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_generic_set_write_protect(esp_flash_t *chip, bool write_protect)
|
|
{
|
|
esp_err_t err = ESP_OK;
|
|
|
|
err = chip->chip_drv->wait_idle(chip, DEFAULT_IDLE_TIMEOUT);
|
|
|
|
if (err == ESP_OK) {
|
|
chip->host->set_write_protect(chip->host, write_protect);
|
|
}
|
|
|
|
bool wp_read;
|
|
err = chip->chip_drv->get_chip_write_protect(chip, &wp_read);
|
|
if (err == ESP_OK && wp_read != write_protect) {
|
|
// WREN flag has not been set!
|
|
err = ESP_ERR_NOT_FOUND;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_generic_get_write_protect(esp_flash_t *chip, bool *out_write_protect)
|
|
{
|
|
esp_err_t err = ESP_OK;
|
|
uint8_t status;
|
|
assert(out_write_protect!=NULL);
|
|
err = chip->host->read_status(chip->host, &status);
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
|
|
*out_write_protect = ((status & SR_WREN) == 0);
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_generic_wait_host_idle(esp_flash_t *chip, uint32_t *timeout_ms)
|
|
{
|
|
while (chip->host->host_idle(chip->host) && *timeout_ms > 0) {
|
|
if (*timeout_ms > 1) {
|
|
chip->os_func->delay_ms(chip->os_func_data, 1);
|
|
}
|
|
(*timeout_ms)--;
|
|
}
|
|
return (*timeout_ms > 0) ? ESP_OK : ESP_ERR_TIMEOUT;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_generic_wait_idle(esp_flash_t *chip, uint32_t timeout_ms)
|
|
{
|
|
timeout_ms++; // allow at least one pass before timeout, last one has no sleep cycle
|
|
|
|
uint8_t status = 0;
|
|
while (timeout_ms > 0) {
|
|
|
|
esp_err_t err = spi_flash_generic_wait_host_idle(chip, &timeout_ms);
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
|
|
err = chip->host->read_status(chip->host, &status);
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
if ((status & SR_WIP) == 0) {
|
|
break; // Write in progress is complete
|
|
}
|
|
if (timeout_ms > 1) {
|
|
chip->os_func->delay_ms(chip->os_func_data, 1);
|
|
}
|
|
timeout_ms--;
|
|
}
|
|
|
|
return (timeout_ms > 0) ? ESP_OK : ESP_ERR_TIMEOUT;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_generic_config_host_read_mode(esp_flash_t *chip)
|
|
{
|
|
uint32_t dummy_cyclelen_base;
|
|
uint32_t addr_bitlen;
|
|
uint32_t read_command;
|
|
|
|
switch (chip->read_mode) {
|
|
case SPI_FLASH_QIO:
|
|
//for QIO mode, the 4 bit right after the address are used for continuous mode, should be set to 0 to avoid that.
|
|
addr_bitlen = 32;
|
|
dummy_cyclelen_base = 4;
|
|
read_command = CMD_FASTRD_QIO;
|
|
break;
|
|
case SPI_FLASH_QOUT:
|
|
addr_bitlen = 24;
|
|
dummy_cyclelen_base = 8;
|
|
read_command = CMD_FASTRD_QUAD;
|
|
break;
|
|
case SPI_FLASH_DIO:
|
|
//for DIO mode, the 4 bit right after the address are used for continuous mode, should be set to 0 to avoid that.
|
|
addr_bitlen = 28;
|
|
dummy_cyclelen_base = 2;
|
|
read_command = CMD_FASTRD_DIO;
|
|
break;
|
|
case SPI_FLASH_DOUT:
|
|
addr_bitlen = 24;
|
|
dummy_cyclelen_base = 8;
|
|
read_command = CMD_FASTRD_DUAL;
|
|
break;
|
|
case SPI_FLASH_FASTRD:
|
|
addr_bitlen = 24;
|
|
dummy_cyclelen_base = 8;
|
|
read_command = CMD_FASTRD;
|
|
break;
|
|
case SPI_FLASH_SLOWRD:
|
|
addr_bitlen = 24;
|
|
dummy_cyclelen_base = 0;
|
|
read_command = CMD_READ;
|
|
break;
|
|
default:
|
|
return ESP_ERR_FLASH_NOT_INITIALISED;
|
|
}
|
|
|
|
return chip->host->configure_host_read_mode(chip->host, chip->read_mode, addr_bitlen, dummy_cyclelen_base, read_command);
|
|
}
|
|
|
|
esp_err_t spi_flash_common_set_read_mode(esp_flash_t *chip, uint8_t qe_rdsr_command, uint8_t qe_wrsr_command, uint8_t qe_sr_bitwidth, unsigned qe_sr_bit)
|
|
{
|
|
if (spi_flash_is_quad_mode(chip)) {
|
|
// Ensure quad modes are enabled, using the Quad Enable parameters supplied.
|
|
spi_flash_trans_t t = {
|
|
.command = qe_rdsr_command,
|
|
.mosi_data = 0,
|
|
.mosi_len = 0,
|
|
.miso_len = qe_sr_bitwidth,
|
|
};
|
|
chip->host->common_command(chip->host, &t);
|
|
unsigned sr = t.miso_data[0];
|
|
ESP_EARLY_LOGV(TAG, "set_read_mode: status before 0x%x", sr);
|
|
if ((sr & qe_sr_bit) == 0) {
|
|
//some chips needs the write protect to be disabled before writing to Status Register
|
|
chip->chip_drv->set_chip_write_protect(chip, false);
|
|
|
|
sr |= qe_sr_bit;
|
|
spi_flash_trans_t t = {
|
|
.command = qe_wrsr_command,
|
|
.mosi_data = sr,
|
|
.mosi_len = qe_sr_bitwidth,
|
|
.miso_len = 0,
|
|
};
|
|
chip->host->common_command(chip->host, &t);
|
|
|
|
/* Check the new QE bit has stayed set */
|
|
spi_flash_trans_t t_rdsr = {
|
|
.command = qe_rdsr_command,
|
|
.mosi_data = 0,
|
|
.mosi_len = 0,
|
|
.miso_len = qe_sr_bitwidth
|
|
};
|
|
chip->host->common_command(chip->host, &t_rdsr);
|
|
sr = t_rdsr.miso_data[0];
|
|
ESP_EARLY_LOGV(TAG, "set_read_mode: status after 0x%x", sr);
|
|
if ((sr & qe_sr_bit) == 0) {
|
|
return ESP_ERR_FLASH_NO_RESPONSE;
|
|
}
|
|
|
|
chip->chip_drv->set_chip_write_protect(chip, true);
|
|
}
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_generic_set_read_mode(esp_flash_t *chip)
|
|
{
|
|
// On "generic" chips, this involves checking
|
|
// bit 1 (QE) of RDSR2 (35h) result
|
|
// (it works this way on GigaDevice & Fudan Micro chips, probably others...)
|
|
const uint8_t BIT_QE = 1 << 1;
|
|
return spi_flash_common_set_read_mode(chip, CMD_RDSR2, CMD_WRSR2, 8, BIT_QE);
|
|
}
|
|
|
|
static const char chip_name[] = "generic";
|
|
|
|
const spi_flash_chip_t esp_flash_chip_generic = {
|
|
.name = chip_name,
|
|
.probe = spi_flash_chip_generic_probe,
|
|
.reset = spi_flash_chip_generic_reset,
|
|
.detect_size = spi_flash_chip_generic_detect_size,
|
|
.erase_chip = spi_flash_chip_generic_erase_chip,
|
|
.erase_sector = spi_flash_chip_generic_erase_sector,
|
|
.erase_block = spi_flash_chip_generic_erase_block,
|
|
.sector_size = 4 * 1024,
|
|
.block_erase_size = 64 * 1024,
|
|
|
|
// TODO: figure out if generic chip-wide protection bits exist across some manufacturers
|
|
.get_chip_write_protect = spi_flash_chip_generic_get_write_protect,
|
|
.set_chip_write_protect = spi_flash_chip_generic_set_write_protect,
|
|
|
|
// Chip write protection regions do not appear to be standardised
|
|
// at all, this is implemented in chip-specific drivers only.
|
|
.num_protectable_regions = 0,
|
|
.protectable_regions = NULL,
|
|
.get_protected_regions = NULL,
|
|
.set_protected_regions = NULL,
|
|
|
|
.read = spi_flash_chip_generic_read,
|
|
.write = spi_flash_chip_generic_write,
|
|
.program_page = spi_flash_chip_generic_page_program,
|
|
.page_size = 256,
|
|
.write_encrypted = spi_flash_chip_generic_write_encrypted,
|
|
|
|
.wait_idle = spi_flash_chip_generic_wait_idle,
|
|
.set_read_mode = spi_flash_chip_generic_set_read_mode,
|
|
};
|