* Use "example" in all example function & variable names, ie use i2c_example_xxx instead of i2c_xxx for example functions. Closes #198 https://github.com/espressif/esp-idf/issues/198 * Mark example functions, etc. static * Replace uses of "test" & "demo" with "example" * Split the UART example into two * Rename "main" example files to end with "_main.c" for disambiguation
150 lines
5.3 KiB
C
150 lines
5.3 KiB
C
/* Ledc fade example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <stdio.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/xtensa_api.h"
|
|
#include "freertos/queue.h"
|
|
#include "driver/ledc.h"
|
|
#include "esp_attr.h"
|
|
#include "esp_err.h"
|
|
|
|
/*
|
|
* About this example
|
|
* 1. init LEDC module:
|
|
* a. You need to set the timer of LEDC first, this decide the frequency and resolution of PWM.
|
|
* b. You need to set the LEDC channel you want to use, and bind with one of the timers.
|
|
*
|
|
* 2. You can install a default fade function, then you can use fade APIs.
|
|
*
|
|
* 3. You can also set a target duty directly without fading.
|
|
*
|
|
* 4. This example use GPIO18/19/4/5 as LEDC ouput, and it will change the duty repeatedly.
|
|
*
|
|
* 5. GPIO18/19 are from high speed channel group. GPIO4/5 are from low speed channel group.
|
|
*
|
|
*/
|
|
#define LEDC_HS_TIMER LEDC_TIMER_0
|
|
#define LEDC_HS_MODE LEDC_HIGH_SPEED_MODE
|
|
#define LEDC_HS_CH0_GPIO (18)
|
|
#define LEDC_HS_CH0_CHANNEL LEDC_CHANNEL_0
|
|
#define LEDC_HS_CH1_GPIO (19)
|
|
#define LEDC_HS_CH1_CHANNEL LEDC_CHANNEL_1
|
|
|
|
#define LEDC_LS_TIMER LEDC_TIMER_1
|
|
#define LEDC_LS_MODE LEDC_LOW_SPEED_MODE
|
|
#define LEDC_LS_CH2_GPIO (4)
|
|
#define LEDC_LS_CH2_CHANNEL LEDC_CHANNEL_2
|
|
#define LEDC_LS_CH3_GPIO (5)
|
|
#define LEDC_LS_CH3_CHANNEL LEDC_CHANNEL_3
|
|
|
|
#define LEDC_TEST_CH_NUM (4)
|
|
typedef struct {
|
|
int channel;
|
|
int io;
|
|
int mode;
|
|
int timer_idx;
|
|
} ledc_info_t;
|
|
|
|
void app_main()
|
|
{
|
|
int ch;
|
|
ledc_info_t ledc_ch[LEDC_TEST_CH_NUM] = {
|
|
{
|
|
.channel = LEDC_HS_CH0_CHANNEL,
|
|
.io = LEDC_HS_CH0_GPIO,
|
|
.mode = LEDC_HS_MODE,
|
|
.timer_idx = LEDC_HS_TIMER
|
|
},
|
|
{
|
|
.channel = LEDC_HS_CH1_CHANNEL,
|
|
.io = LEDC_HS_CH1_GPIO,
|
|
.mode = LEDC_HS_MODE,
|
|
.timer_idx = LEDC_HS_TIMER
|
|
},
|
|
{
|
|
.channel = LEDC_LS_CH2_CHANNEL,
|
|
.io = LEDC_LS_CH2_GPIO,
|
|
.mode = LEDC_LS_MODE,
|
|
.timer_idx = LEDC_LS_TIMER
|
|
},
|
|
{
|
|
.channel = LEDC_LS_CH3_CHANNEL,
|
|
.io = LEDC_LS_CH3_GPIO,
|
|
.mode = LEDC_LS_MODE,
|
|
.timer_idx = LEDC_LS_TIMER
|
|
}
|
|
};
|
|
|
|
ledc_timer_config_t ledc_timer = {
|
|
.bit_num = LEDC_TIMER_13_BIT, //set timer counter bit number
|
|
.freq_hz = 5000, //set frequency of pwm
|
|
.speed_mode = LEDC_HS_MODE, //timer mode,
|
|
.timer_num = LEDC_HS_TIMER //timer index
|
|
};
|
|
//configure timer0 for high speed channels
|
|
ledc_timer_config(&ledc_timer);
|
|
|
|
//configure timer1 for low speed channels
|
|
ledc_timer.speed_mode = LEDC_LS_MODE;
|
|
ledc_timer.timer_num = LEDC_LS_TIMER;
|
|
ledc_timer_config(&ledc_timer);
|
|
|
|
for (ch = 0; ch < LEDC_TEST_CH_NUM; ch++) {
|
|
ledc_channel_config_t ledc_channel = {
|
|
//set LEDC channel 0
|
|
.channel = ledc_ch[ch].channel,
|
|
//set the duty for initialization.(duty range is 0 ~ ((2**bit_num)-1)
|
|
.duty = 0,
|
|
//GPIO number
|
|
.gpio_num = ledc_ch[ch].io,
|
|
//GPIO INTR TYPE, as an example, we enable fade_end interrupt here.
|
|
.intr_type = LEDC_INTR_FADE_END,
|
|
//set LEDC mode, from ledc_mode_t
|
|
.speed_mode = ledc_ch[ch].mode,
|
|
//set LEDC timer source, if different channel use one timer,
|
|
//the frequency and bit_num of these channels should be the same
|
|
.timer_sel = ledc_ch[ch].timer_idx,
|
|
};
|
|
//set the configuration
|
|
ledc_channel_config(&ledc_channel);
|
|
}
|
|
|
|
//initialize fade service.
|
|
ledc_fade_func_install(0);
|
|
while (1) {
|
|
printf("LEDC fade up\n");
|
|
for (ch = 0; ch < LEDC_TEST_CH_NUM; ch++) {
|
|
ledc_set_fade_with_time(ledc_ch[ch].mode, ledc_ch[ch].channel, 4000, 2000);
|
|
ledc_fade_start(ledc_ch[ch].mode, ledc_ch[ch].channel, LEDC_FADE_NO_WAIT);
|
|
}
|
|
vTaskDelay(3000 / portTICK_PERIOD_MS);
|
|
|
|
printf("LEDC fade down\n");
|
|
for (ch = 0; ch < LEDC_TEST_CH_NUM; ch++) {
|
|
ledc_set_fade_with_time(ledc_ch[ch].mode, ledc_ch[ch].channel, 0, 2000);
|
|
ledc_fade_start(ledc_ch[ch].mode, ledc_ch[ch].channel, LEDC_FADE_NO_WAIT);
|
|
}
|
|
vTaskDelay(3000 / portTICK_PERIOD_MS);
|
|
|
|
printf("LEDC set duty without fade\n");
|
|
for (ch = 0; ch < LEDC_TEST_CH_NUM; ch++) {
|
|
ledc_set_duty(ledc_ch[ch].mode, ledc_ch[ch].channel, 2000);
|
|
ledc_update_duty(ledc_ch[ch].mode, ledc_ch[ch].channel);
|
|
}
|
|
vTaskDelay(1000 / portTICK_PERIOD_MS);
|
|
|
|
printf("LEDC set duty without fade\n");
|
|
for (ch = 0; ch < LEDC_TEST_CH_NUM; ch++) {
|
|
ledc_set_duty(ledc_ch[ch].mode, ledc_ch[ch].channel, 0);
|
|
ledc_update_duty(ledc_ch[ch].mode, ledc_ch[ch].channel);
|
|
}
|
|
vTaskDelay(1000 / portTICK_PERIOD_MS);
|
|
}
|
|
}
|