OVMS3-idf/components/esp32/test/test_sleep.c
Alex Lisitsyn 1e9bb5bb7c esp32: Deactivate wakeup trigger after first wakeup
The files updated according to code review discussions.
In the sleep_modes.c removed immidiate disable of ULP  mode and leave just trigger deactivation.
The esp_sleep.h is updated to have the same defines for source as esp_sleep_wakeup_cause_t.
Updated documentation in sleep_modes.rst file to include cross references.
Some minor changes in test_sleep.c unit test.

(TW#18952)
Closes https://github.com/espressif/esp-idf/issues/1677
2018-03-20 12:23:32 +05:00

207 lines
6.7 KiB
C

#include "unity.h"
#include <sys/time.h>
#include "esp_sleep.h"
#include "driver/rtc_io.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "soc/rtc.h" // for wakeup trigger defines
#include "soc/rtc_cntl_reg.h" // for read rtc registers directly (cause)
#include "soc/soc.h" // for direct register read macros
#define ESP_EXT0_WAKEUP_LEVEL_LOW 0
#define ESP_EXT0_WAKEUP_LEVEL_HIGH 1
static struct timeval tv_start, tv_stop;
TEST_CASE("esp_deepsleep works", "[deepsleep][reset=DEEPSLEEP_RESET]")
{
esp_deep_sleep(2000000);
}
static void deep_sleep_task(void *arg)
{
esp_deep_sleep_start();
}
static void do_deep_sleep_from_app_cpu()
{
xTaskCreatePinnedToCore(&deep_sleep_task, "ds", 2048, NULL, 5, NULL, 1);
// keep running some non-IRAM code
vTaskSuspendAll();
while (true) {
;
}
}
TEST_CASE("wake up using timer", "[deepsleep][reset=DEEPSLEEP_RESET]")
{
esp_sleep_enable_timer_wakeup(2000000);
esp_deep_sleep_start();
}
TEST_CASE("wake up from light sleep using timer", "[deepsleep]")
{
esp_sleep_enable_timer_wakeup(2000000);
struct timeval tv_start, tv_stop;
gettimeofday(&tv_start, NULL);
esp_light_sleep_start();
gettimeofday(&tv_stop, NULL);
float dt = (tv_stop.tv_sec - tv_start.tv_sec) * 1e3f +
(tv_stop.tv_usec - tv_start.tv_usec) * 1e-3f;
TEST_ASSERT_INT32_WITHIN(500, 2000, (int) dt);
}
#ifndef CONFIG_FREERTOS_UNICORE
TEST_CASE("enter deep sleep on APP CPU and wake up using timer", "[deepsleep][reset=DEEPSLEEP_RESET]")
{
esp_sleep_enable_timer_wakeup(2000000);
do_deep_sleep_from_app_cpu();
}
#endif
TEST_CASE("wake up using ext0 (13 high)", "[deepsleep][ignore]")
{
ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
ESP_ERROR_CHECK(gpio_pullup_dis(GPIO_NUM_13));
ESP_ERROR_CHECK(gpio_pulldown_en(GPIO_NUM_13));
ESP_ERROR_CHECK(esp_sleep_enable_ext0_wakeup(GPIO_NUM_13, ESP_EXT0_WAKEUP_LEVEL_HIGH));
esp_deep_sleep_start();
}
TEST_CASE("wake up using ext0 (13 low)", "[deepsleep][ignore]")
{
ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
ESP_ERROR_CHECK(gpio_pullup_en(GPIO_NUM_13));
ESP_ERROR_CHECK(gpio_pulldown_dis(GPIO_NUM_13));
ESP_ERROR_CHECK(esp_sleep_enable_ext0_wakeup(GPIO_NUM_13, ESP_EXT0_WAKEUP_LEVEL_LOW));
esp_deep_sleep_start();
}
TEST_CASE("wake up using ext1 when RTC_PERIPH is off (13 high)", "[deepsleep][ignore]")
{
// This test needs external pulldown
ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ANY_HIGH));
esp_deep_sleep_start();
}
TEST_CASE("wake up using ext1 when RTC_PERIPH is off (13 low)", "[deepsleep][ignore]")
{
// This test needs external pullup
ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ALL_LOW));
esp_deep_sleep_start();
}
TEST_CASE("wake up using ext1 when RTC_PERIPH is on (13 high)", "[deepsleep][ignore]")
{
ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
ESP_ERROR_CHECK(gpio_pullup_dis(GPIO_NUM_13));
ESP_ERROR_CHECK(gpio_pulldown_en(GPIO_NUM_13));
ESP_ERROR_CHECK(esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ANY_HIGH));
esp_deep_sleep_start();
}
TEST_CASE("wake up using ext1 when RTC_PERIPH is on (13 low)", "[deepsleep][ignore]")
{
ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
ESP_ERROR_CHECK(gpio_pullup_en(GPIO_NUM_13));
ESP_ERROR_CHECK(gpio_pulldown_dis(GPIO_NUM_13));
ESP_ERROR_CHECK(esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ALL_LOW));
esp_deep_sleep_start();
}
static float get_time_ms(void)
{
gettimeofday(&tv_stop, NULL);
float dt = (tv_stop.tv_sec - tv_start.tv_sec) * 1e3f +
(tv_stop.tv_usec - tv_start.tv_usec) * 1e-3f;
return abs(dt);
}
static uint32_t get_cause()
{
uint32_t wakeup_cause = REG_GET_FIELD(RTC_CNTL_WAKEUP_STATE_REG, \
RTC_CNTL_WAKEUP_CAUSE);
return wakeup_cause;
}
// This test case verifies deactivation of trigger for wake up sources
TEST_CASE("disable source trigger behavior", "[deepsleep]")
{
float dt = 0;
printf("Setup timer and ext0 to wakeup imediately from GPIO_13 \n");
// Setup ext0 configuration to wake up almost immediately
// The wakeup time is proportional to input capacitance * pullup resistance
ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
ESP_ERROR_CHECK(gpio_pullup_en(GPIO_NUM_13));
ESP_ERROR_CHECK(gpio_pulldown_dis(GPIO_NUM_13));
ESP_ERROR_CHECK(esp_sleep_enable_ext0_wakeup(GPIO_NUM_13, ESP_EXT0_WAKEUP_LEVEL_HIGH));
// Setup timer to wakeup with timeout
esp_sleep_enable_timer_wakeup(2000000);
// Save start time
gettimeofday(&tv_start, NULL);
esp_light_sleep_start();
dt = get_time_ms();
printf("Ext0 sleep time = %d \n", (int) dt);
// Check wakeup from Ext0 using time measurement because wakeup cause is
// not available in light sleep mode
TEST_ASSERT_INT32_WITHIN(299, 300, (int) dt);
TEST_ASSERT((get_cause() & RTC_EXT0_TRIG_EN) != 0);
// Disable Ext0 source. Timer source should be triggered
ESP_ERROR_CHECK(esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_EXT0));
printf("Disable ext0 trigger and leave timer active.\n");
gettimeofday(&tv_start, NULL);
esp_light_sleep_start();
dt = get_time_ms();
printf("Timer sleep time = %d \n", (int) dt);
TEST_ASSERT_INT32_WITHIN(500, 2000, (int) dt);
// Additionaly check wakeup cause
TEST_ASSERT((get_cause() & RTC_TIMER_TRIG_EN) != 0);
// Disable timer source.
ESP_ERROR_CHECK(esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_TIMER));
// Setup ext0 configuration to wake up immediately
ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
ESP_ERROR_CHECK(gpio_pullup_en(GPIO_NUM_13));
ESP_ERROR_CHECK(gpio_pulldown_dis(GPIO_NUM_13));
ESP_ERROR_CHECK(esp_sleep_enable_ext0_wakeup(GPIO_NUM_13, ESP_EXT0_WAKEUP_LEVEL_HIGH));
printf("Disable timer trigger to wake up from ext0 source.\n");
gettimeofday(&tv_start, NULL);
esp_light_sleep_start();
dt = get_time_ms();
printf("Ext0 sleep time = %d \n", (int) dt);
TEST_ASSERT_INT32_WITHIN(199, 200, (int) dt);
TEST_ASSERT((get_cause() & RTC_EXT0_TRIG_EN) != 0);
// Check error message when source is already disabled
esp_err_t err_code = esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_TIMER);
TEST_ASSERT(err_code == ESP_ERR_INVALID_STATE);
printf("Test case completed successfully.");
}