Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
OVMS3-idf/components/esp32/include/soc/rtc_io_reg.h
Chu Shu Chen b1db2721dc driver: add rtc module and bugfix gpio32 gpio33 
feature(rtc_module):add rtc module

1. add rtc io control API (pull,output and input)
2. add touch pad API (touch pad read and interrupt)
3. add adc1 API (the max width is 12 Bits and support attenuation)
4. add hall sensor API (support hall sensor read )
5. add dac API (the width is 8 Bits)

bugfix(gpio):gpio32 and gpio33 can not output and input

the gpio32 and gpio33 is initialize by librtc.a,and gpio_config not initialize the gpio as
digital gpio.they can not output and input,when users use gpio32 or gpio33.And there are some problems
about others driver ,when they use gpio32 or gpio33 as  matrix.
2016-12-07 15:56:13 +08:00

1951 lines
97 KiB
C
Raw Blame History

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_RTC_IO_REG_H_
#define _SOC_RTC_IO_REG_H_
#include "soc.h"
#define RTC_GPIO_OUT_REG (DR_REG_RTCIO_BASE + 0x0)
/* RTC_GPIO_OUT_DATA : R/W ;bitpos:[31:14] ;default: 0 ; */
/*description: GPIO0~17 output value*/
#define RTC_GPIO_OUT_DATA 0x0003FFFF
#define RTC_GPIO_OUT_DATA_M ((RTC_GPIO_OUT_DATA_V)<<(RTC_GPIO_OUT_DATA_S))
#define RTC_GPIO_OUT_DATA_V 0x3FFFF
#define RTC_GPIO_OUT_DATA_S 14
#define RTC_GPIO_OUT_W1TS_REG (DR_REG_RTCIO_BASE + 0x4)
/* RTC_GPIO_OUT_DATA_W1TS : WO ;bitpos:[31:14] ;default: 0 ; */
/*description: GPIO0~17 output value write 1 to set*/
#define RTC_GPIO_OUT_DATA_W1TS 0x0003FFFF
#define RTC_GPIO_OUT_DATA_W1TS_M ((RTC_GPIO_OUT_DATA_W1TS_V)<<(RTC_GPIO_OUT_DATA_W1TS_S))
#define RTC_GPIO_OUT_DATA_W1TS_V 0x3FFFF
#define RTC_GPIO_OUT_DATA_W1TS_S 14
#define RTC_GPIO_OUT_W1TC_REG (DR_REG_RTCIO_BASE + 0x8)
/* RTC_GPIO_OUT_DATA_W1TC : WO ;bitpos:[31:14] ;default: 0 ; */
/*description: GPIO0~17 output value write 1 to clear*/
#define RTC_GPIO_OUT_DATA_W1TC 0x0003FFFF
#define RTC_GPIO_OUT_DATA_W1TC_M ((RTC_GPIO_OUT_DATA_W1TC_V)<<(RTC_GPIO_OUT_DATA_W1TC_S))
#define RTC_GPIO_OUT_DATA_W1TC_V 0x3FFFF
#define RTC_GPIO_OUT_DATA_W1TC_S 14
#define RTC_GPIO_ENABLE_REG (DR_REG_RTCIO_BASE + 0xc)
/* RTC_GPIO_ENABLE : R/W ;bitpos:[31:14] ;default: 0 ; */
/*description: GPIO0~17 output enable*/
#define RTC_GPIO_ENABLE 0x0003FFFF
#define RTC_GPIO_ENABLE_M ((RTC_GPIO_ENABLE_V)<<(RTC_GPIO_ENABLE_S))
#define RTC_GPIO_ENABLE_V 0x3FFFF
#define RTC_GPIO_ENABLE_S 14
#define RTC_GPIO_ENABLE_W1TS_REG (DR_REG_RTCIO_BASE + 0x10)
/* RTC_GPIO_ENABLE_W1TS : WO ;bitpos:[31:14] ;default: 0 ; */
/*description: GPIO0~17 output enable write 1 to set*/
#define RTC_GPIO_ENABLE_W1TS 0x0003FFFF
#define RTC_GPIO_ENABLE_W1TS_M ((RTC_GPIO_ENABLE_W1TS_V)<<(RTC_GPIO_ENABLE_W1TS_S))
#define RTC_GPIO_ENABLE_W1TS_V 0x3FFFF
#define RTC_GPIO_ENABLE_W1TS_S 14
#define RTC_GPIO_ENABLE_W1TC_REG (DR_REG_RTCIO_BASE + 0x14)
/* RTC_GPIO_ENABLE_W1TC : WO ;bitpos:[31:14] ;default: 0 ; */
/*description: GPIO0~17 output enable write 1 to clear*/
#define RTC_GPIO_ENABLE_W1TC 0x0003FFFF
#define RTC_GPIO_ENABLE_W1TC_M ((RTC_GPIO_ENABLE_W1TC_V)<<(RTC_GPIO_ENABLE_W1TC_S))
#define RTC_GPIO_ENABLE_W1TC_V 0x3FFFF
#define RTC_GPIO_ENABLE_W1TC_S 14
#define RTC_GPIO_STATUS_REG (DR_REG_RTCIO_BASE + 0x18)
/* RTC_GPIO_STATUS_INT : R/W ;bitpos:[31:14] ;default: 0 ; */
/*description: GPIO0~17 interrupt status*/
#define RTC_GPIO_STATUS_INT 0x0003FFFF
#define RTC_GPIO_STATUS_INT_M ((RTC_GPIO_STATUS_INT_V)<<(RTC_GPIO_STATUS_INT_S))
#define RTC_GPIO_STATUS_INT_V 0x3FFFF
#define RTC_GPIO_STATUS_INT_S 14
#define RTC_GPIO_STATUS_W1TS_REG (DR_REG_RTCIO_BASE + 0x1c)
/* RTC_GPIO_STATUS_INT_W1TS : WO ;bitpos:[31:14] ;default: 0 ; */
/*description: GPIO0~17 interrupt status write 1 to set*/
#define RTC_GPIO_STATUS_INT_W1TS 0x0003FFFF
#define RTC_GPIO_STATUS_INT_W1TS_M ((RTC_GPIO_STATUS_INT_W1TS_V)<<(RTC_GPIO_STATUS_INT_W1TS_S))
#define RTC_GPIO_STATUS_INT_W1TS_V 0x3FFFF
#define RTC_GPIO_STATUS_INT_W1TS_S 14
#define RTC_GPIO_STATUS_W1TC_REG (DR_REG_RTCIO_BASE + 0x20)
/* RTC_GPIO_STATUS_INT_W1TC : WO ;bitpos:[31:14] ;default: 0 ; */
/*description: GPIO0~17 interrupt status write 1 to clear*/
#define RTC_GPIO_STATUS_INT_W1TC 0x0003FFFF
#define RTC_GPIO_STATUS_INT_W1TC_M ((RTC_GPIO_STATUS_INT_W1TC_V)<<(RTC_GPIO_STATUS_INT_W1TC_S))
#define RTC_GPIO_STATUS_INT_W1TC_V 0x3FFFF
#define RTC_GPIO_STATUS_INT_W1TC_S 14
#define RTC_GPIO_IN_REG (DR_REG_RTCIO_BASE + 0x24)
/* RTC_GPIO_IN_NEXT : RO ;bitpos:[31:14] ;default: ; */
/*description: GPIO0~17 input value*/
#define RTC_GPIO_IN_NEXT 0x0003FFFF
#define RTC_GPIO_IN_NEXT_M ((RTC_GPIO_IN_NEXT_V)<<(RTC_GPIO_IN_NEXT_S))
#define RTC_GPIO_IN_NEXT_V 0x3FFFF
#define RTC_GPIO_IN_NEXT_S 14
#define RTC_GPIO_PIN0_REG (DR_REG_RTCIO_BASE + 0x28)
/* RTC_GPIO_PIN0_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN0_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN0_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN0_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN0_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN0_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN0_INT_TYPE 0x00000007
#define RTC_GPIO_PIN0_INT_TYPE_M ((RTC_GPIO_PIN0_INT_TYPE_V)<<(RTC_GPIO_PIN0_INT_TYPE_S))
#define RTC_GPIO_PIN0_INT_TYPE_V 0x7
#define RTC_GPIO_PIN0_INT_TYPE_S 7
/* RTC_GPIO_PIN0_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN0_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN0_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN0_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN0_PAD_DRIVER_S 2
#define RTC_GPIO_PIN1_REG (DR_REG_RTCIO_BASE + 0x2c)
/* RTC_GPIO_PIN1_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN1_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN1_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN1_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN1_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN1_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN1_INT_TYPE 0x00000007
#define RTC_GPIO_PIN1_INT_TYPE_M ((RTC_GPIO_PIN1_INT_TYPE_V)<<(RTC_GPIO_PIN1_INT_TYPE_S))
#define RTC_GPIO_PIN1_INT_TYPE_V 0x7
#define RTC_GPIO_PIN1_INT_TYPE_S 7
/* RTC_GPIO_PIN1_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN1_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN1_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN1_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN1_PAD_DRIVER_S 2
#define RTC_GPIO_PIN2_REG (DR_REG_RTCIO_BASE + 0x30)
/* RTC_GPIO_PIN2_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN2_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN2_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN2_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN2_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN2_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN2_INT_TYPE 0x00000007
#define RTC_GPIO_PIN2_INT_TYPE_M ((RTC_GPIO_PIN2_INT_TYPE_V)<<(RTC_GPIO_PIN2_INT_TYPE_S))
#define RTC_GPIO_PIN2_INT_TYPE_V 0x7
#define RTC_GPIO_PIN2_INT_TYPE_S 7
/* RTC_GPIO_PIN2_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN2_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN2_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN2_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN2_PAD_DRIVER_S 2
#define RTC_GPIO_PIN3_REG (DR_REG_RTCIO_BASE + 0x34)
/* RTC_GPIO_PIN3_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN3_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN3_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN3_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN3_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN3_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN3_INT_TYPE 0x00000007
#define RTC_GPIO_PIN3_INT_TYPE_M ((RTC_GPIO_PIN3_INT_TYPE_V)<<(RTC_GPIO_PIN3_INT_TYPE_S))
#define RTC_GPIO_PIN3_INT_TYPE_V 0x7
#define RTC_GPIO_PIN3_INT_TYPE_S 7
/* RTC_GPIO_PIN3_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN3_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN3_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN3_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN3_PAD_DRIVER_S 2
#define RTC_GPIO_PIN4_REG (DR_REG_RTCIO_BASE + 0x38)
/* RTC_GPIO_PIN4_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN4_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN4_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN4_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN4_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN4_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN4_INT_TYPE 0x00000007
#define RTC_GPIO_PIN4_INT_TYPE_M ((RTC_GPIO_PIN4_INT_TYPE_V)<<(RTC_GPIO_PIN4_INT_TYPE_S))
#define RTC_GPIO_PIN4_INT_TYPE_V 0x7
#define RTC_GPIO_PIN4_INT_TYPE_S 7
/* RTC_GPIO_PIN4_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN4_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN4_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN4_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN4_PAD_DRIVER_S 2
#define RTC_GPIO_PIN5_REG (DR_REG_RTCIO_BASE + 0x3c)
/* RTC_GPIO_PIN5_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN5_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN5_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN5_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN5_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN5_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN5_INT_TYPE 0x00000007
#define RTC_GPIO_PIN5_INT_TYPE_M ((RTC_GPIO_PIN5_INT_TYPE_V)<<(RTC_GPIO_PIN5_INT_TYPE_S))
#define RTC_GPIO_PIN5_INT_TYPE_V 0x7
#define RTC_GPIO_PIN5_INT_TYPE_S 7
/* RTC_GPIO_PIN5_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN5_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN5_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN5_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN5_PAD_DRIVER_S 2
#define RTC_GPIO_PIN6_REG (DR_REG_RTCIO_BASE + 0x40)
/* RTC_GPIO_PIN6_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN6_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN6_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN6_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN6_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN6_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN6_INT_TYPE 0x00000007
#define RTC_GPIO_PIN6_INT_TYPE_M ((RTC_GPIO_PIN6_INT_TYPE_V)<<(RTC_GPIO_PIN6_INT_TYPE_S))
#define RTC_GPIO_PIN6_INT_TYPE_V 0x7
#define RTC_GPIO_PIN6_INT_TYPE_S 7
/* RTC_GPIO_PIN6_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN6_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN6_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN6_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN6_PAD_DRIVER_S 2
#define RTC_GPIO_PIN7_REG (DR_REG_RTCIO_BASE + 0x44)
/* RTC_GPIO_PIN7_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN7_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN7_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN7_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN7_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN7_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN7_INT_TYPE 0x00000007
#define RTC_GPIO_PIN7_INT_TYPE_M ((RTC_GPIO_PIN7_INT_TYPE_V)<<(RTC_GPIO_PIN7_INT_TYPE_S))
#define RTC_GPIO_PIN7_INT_TYPE_V 0x7
#define RTC_GPIO_PIN7_INT_TYPE_S 7
/* RTC_GPIO_PIN7_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN7_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN7_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN7_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN7_PAD_DRIVER_S 2
#define RTC_GPIO_PIN8_REG (DR_REG_RTCIO_BASE + 0x48)
/* RTC_GPIO_PIN8_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN8_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN8_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN8_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN8_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN8_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN8_INT_TYPE 0x00000007
#define RTC_GPIO_PIN8_INT_TYPE_M ((RTC_GPIO_PIN8_INT_TYPE_V)<<(RTC_GPIO_PIN8_INT_TYPE_S))
#define RTC_GPIO_PIN8_INT_TYPE_V 0x7
#define RTC_GPIO_PIN8_INT_TYPE_S 7
/* RTC_GPIO_PIN8_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN8_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN8_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN8_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN8_PAD_DRIVER_S 2
#define RTC_GPIO_PIN9_REG (DR_REG_RTCIO_BASE + 0x4c)
/* RTC_GPIO_PIN9_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN9_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN9_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN9_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN9_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN9_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN9_INT_TYPE 0x00000007
#define RTC_GPIO_PIN9_INT_TYPE_M ((RTC_GPIO_PIN9_INT_TYPE_V)<<(RTC_GPIO_PIN9_INT_TYPE_S))
#define RTC_GPIO_PIN9_INT_TYPE_V 0x7
#define RTC_GPIO_PIN9_INT_TYPE_S 7
/* RTC_GPIO_PIN9_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN9_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN9_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN9_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN9_PAD_DRIVER_S 2
#define RTC_GPIO_PIN10_REG (DR_REG_RTCIO_BASE + 0x50)
/* RTC_GPIO_PIN10_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN10_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN10_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN10_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN10_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN10_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN10_INT_TYPE 0x00000007
#define RTC_GPIO_PIN10_INT_TYPE_M ((RTC_GPIO_PIN10_INT_TYPE_V)<<(RTC_GPIO_PIN10_INT_TYPE_S))
#define RTC_GPIO_PIN10_INT_TYPE_V 0x7
#define RTC_GPIO_PIN10_INT_TYPE_S 7
/* RTC_GPIO_PIN10_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN10_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN10_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN10_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN10_PAD_DRIVER_S 2
#define RTC_GPIO_PIN11_REG (DR_REG_RTCIO_BASE + 0x54)
/* RTC_GPIO_PIN11_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN11_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN11_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN11_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN11_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN11_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN11_INT_TYPE 0x00000007
#define RTC_GPIO_PIN11_INT_TYPE_M ((RTC_GPIO_PIN11_INT_TYPE_V)<<(RTC_GPIO_PIN11_INT_TYPE_S))
#define RTC_GPIO_PIN11_INT_TYPE_V 0x7
#define RTC_GPIO_PIN11_INT_TYPE_S 7
/* RTC_GPIO_PIN11_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN11_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN11_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN11_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN11_PAD_DRIVER_S 2
#define RTC_GPIO_PIN12_REG (DR_REG_RTCIO_BASE + 0x58)
/* RTC_GPIO_PIN12_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN12_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN12_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN12_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN12_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN12_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN12_INT_TYPE 0x00000007
#define RTC_GPIO_PIN12_INT_TYPE_M ((RTC_GPIO_PIN12_INT_TYPE_V)<<(RTC_GPIO_PIN12_INT_TYPE_S))
#define RTC_GPIO_PIN12_INT_TYPE_V 0x7
#define RTC_GPIO_PIN12_INT_TYPE_S 7
/* RTC_GPIO_PIN12_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN12_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN12_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN12_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN12_PAD_DRIVER_S 2
#define RTC_GPIO_PIN13_REG (DR_REG_RTCIO_BASE + 0x5c)
/* RTC_GPIO_PIN13_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN13_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN13_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN13_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN13_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN13_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN13_INT_TYPE 0x00000007
#define RTC_GPIO_PIN13_INT_TYPE_M ((RTC_GPIO_PIN13_INT_TYPE_V)<<(RTC_GPIO_PIN13_INT_TYPE_S))
#define RTC_GPIO_PIN13_INT_TYPE_V 0x7
#define RTC_GPIO_PIN13_INT_TYPE_S 7
/* RTC_GPIO_PIN13_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN13_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN13_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN13_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN13_PAD_DRIVER_S 2
#define RTC_GPIO_PIN14_REG (DR_REG_RTCIO_BASE + 0x60)
/* RTC_GPIO_PIN14_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN14_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN14_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN14_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN14_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN14_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN14_INT_TYPE 0x00000007
#define RTC_GPIO_PIN14_INT_TYPE_M ((RTC_GPIO_PIN14_INT_TYPE_V)<<(RTC_GPIO_PIN14_INT_TYPE_S))
#define RTC_GPIO_PIN14_INT_TYPE_V 0x7
#define RTC_GPIO_PIN14_INT_TYPE_S 7
/* RTC_GPIO_PIN14_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN14_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN14_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN14_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN14_PAD_DRIVER_S 2
#define RTC_GPIO_PIN15_REG (DR_REG_RTCIO_BASE + 0x64)
/* RTC_GPIO_PIN15_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN15_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN15_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN15_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN15_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN15_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN15_INT_TYPE 0x00000007
#define RTC_GPIO_PIN15_INT_TYPE_M ((RTC_GPIO_PIN15_INT_TYPE_V)<<(RTC_GPIO_PIN15_INT_TYPE_S))
#define RTC_GPIO_PIN15_INT_TYPE_V 0x7
#define RTC_GPIO_PIN15_INT_TYPE_S 7
/* RTC_GPIO_PIN15_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN15_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN15_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN15_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN15_PAD_DRIVER_S 2
#define RTC_GPIO_PIN16_REG (DR_REG_RTCIO_BASE + 0x68)
/* RTC_GPIO_PIN16_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN16_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN16_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN16_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN16_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN16_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN16_INT_TYPE 0x00000007
#define RTC_GPIO_PIN16_INT_TYPE_M ((RTC_GPIO_PIN16_INT_TYPE_V)<<(RTC_GPIO_PIN16_INT_TYPE_S))
#define RTC_GPIO_PIN16_INT_TYPE_V 0x7
#define RTC_GPIO_PIN16_INT_TYPE_S 7
/* RTC_GPIO_PIN16_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN16_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN16_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN16_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN16_PAD_DRIVER_S 2
#define RTC_GPIO_PIN17_REG (DR_REG_RTCIO_BASE + 0x6c)
/* RTC_GPIO_PIN17_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
/*description: GPIO wake up enable only available in light sleep*/
#define RTC_GPIO_PIN17_WAKEUP_ENABLE (BIT(10))
#define RTC_GPIO_PIN17_WAKEUP_ENABLE_M (BIT(10))
#define RTC_GPIO_PIN17_WAKEUP_ENABLE_V 0x1
#define RTC_GPIO_PIN17_WAKEUP_ENABLE_S 10
/* RTC_GPIO_PIN17_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
#define RTC_GPIO_PIN17_INT_TYPE 0x00000007
#define RTC_GPIO_PIN17_INT_TYPE_M ((RTC_GPIO_PIN17_INT_TYPE_V)<<(RTC_GPIO_PIN17_INT_TYPE_S))
#define RTC_GPIO_PIN17_INT_TYPE_V 0x7
#define RTC_GPIO_PIN17_INT_TYPE_S 7
/* RTC_GPIO_PIN17_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
/*description: if set to 0: normal output if set to 1: open drain*/
#define RTC_GPIO_PIN17_PAD_DRIVER (BIT(2))
#define RTC_GPIO_PIN17_PAD_DRIVER_M (BIT(2))
#define RTC_GPIO_PIN17_PAD_DRIVER_V 0x1
#define RTC_GPIO_PIN17_PAD_DRIVER_S 2
#define RTC_IO_RTC_DEBUG_SEL_REG (DR_REG_RTCIO_BASE + 0x70)
/* RTC_IO_DEBUG_12M_NO_GATING : R/W ;bitpos:[25] ;default: 1'd0 ; */
/*description: */
#define RTC_IO_DEBUG_12M_NO_GATING (BIT(25))
#define RTC_IO_DEBUG_12M_NO_GATING_M (BIT(25))
#define RTC_IO_DEBUG_12M_NO_GATING_V 0x1
#define RTC_IO_DEBUG_12M_NO_GATING_S 25
/* RTC_IO_DEBUG_SEL4 : R/W ;bitpos:[24:20] ;default: 5'd0 ; */
/*description: */
#define RTC_IO_DEBUG_SEL4 0x0000001F
#define RTC_IO_DEBUG_SEL4_M ((RTC_IO_DEBUG_SEL4_V)<<(RTC_IO_DEBUG_SEL4_S))
#define RTC_IO_DEBUG_SEL4_V 0x1F
#define RTC_IO_DEBUG_SEL4_S 20
/* RTC_IO_DEBUG_SEL3 : R/W ;bitpos:[19:15] ;default: 5'd0 ; */
/*description: */
#define RTC_IO_DEBUG_SEL3 0x0000001F
#define RTC_IO_DEBUG_SEL3_M ((RTC_IO_DEBUG_SEL3_V)<<(RTC_IO_DEBUG_SEL3_S))
#define RTC_IO_DEBUG_SEL3_V 0x1F
#define RTC_IO_DEBUG_SEL3_S 15
/* RTC_IO_DEBUG_SEL2 : R/W ;bitpos:[14:10] ;default: 5'd0 ; */
/*description: */
#define RTC_IO_DEBUG_SEL2 0x0000001F
#define RTC_IO_DEBUG_SEL2_M ((RTC_IO_DEBUG_SEL2_V)<<(RTC_IO_DEBUG_SEL2_S))
#define RTC_IO_DEBUG_SEL2_V 0x1F
#define RTC_IO_DEBUG_SEL2_S 10
/* RTC_IO_DEBUG_SEL1 : R/W ;bitpos:[9:5] ;default: 5'd0 ; */
/*description: */
#define RTC_IO_DEBUG_SEL1 0x0000001F
#define RTC_IO_DEBUG_SEL1_M ((RTC_IO_DEBUG_SEL1_V)<<(RTC_IO_DEBUG_SEL1_S))
#define RTC_IO_DEBUG_SEL1_V 0x1F
#define RTC_IO_DEBUG_SEL1_S 5
/* RTC_IO_DEBUG_SEL0 : R/W ;bitpos:[4:0] ;default: 5'd0 ; */
/*description: */
#define RTC_IO_DEBUG_SEL0 0x0000001F
#define RTC_IO_DEBUG_SEL0_M ((RTC_IO_DEBUG_SEL0_V)<<(RTC_IO_DEBUG_SEL0_S))
#define RTC_IO_DEBUG_SEL0_V 0x1F
#define RTC_IO_DEBUG_SEL0_S 0
#define RTC_IO_DIG_PAD_HOLD_REG (DR_REG_RTCIO_BASE + 0x74)
/* RTC_IO_DIG_PAD_HOLD : R/W ;bitpos:[31:0] ;default: 1'd0 ; */
/*description: select the digital pad hold value.*/
#define RTC_IO_DIG_PAD_HOLD 0xFFFFFFFF
#define RTC_IO_DIG_PAD_HOLD_M ((RTC_IO_DIG_PAD_HOLD_V)<<(RTC_IO_DIG_PAD_HOLD_S))
#define RTC_IO_DIG_PAD_HOLD_V 0xFFFFFFFF
#define RTC_IO_DIG_PAD_HOLD_S 0
#define RTC_IO_HALL_SENS_REG (DR_REG_RTCIO_BASE + 0x78)
/* RTC_IO_XPD_HALL : R/W ;bitpos:[31] ;default: 1'd0 ; */
/*description: Power on hall sensor and connect to VP and VN*/
#define RTC_IO_XPD_HALL (BIT(31))
#define RTC_IO_XPD_HALL_M (BIT(31))
#define RTC_IO_XPD_HALL_V 0x1
#define RTC_IO_XPD_HALL_S 31
/* RTC_IO_HALL_PHASE : R/W ;bitpos:[30] ;default: 1'd0 ; */
/*description: Reverse phase of hall sensor*/
#define RTC_IO_HALL_PHASE (BIT(30))
#define RTC_IO_HALL_PHASE_M (BIT(30))
#define RTC_IO_HALL_PHASE_V 0x1
#define RTC_IO_HALL_PHASE_S 30
#define RTC_IO_SENSOR_PADS_REG (DR_REG_RTCIO_BASE + 0x7c)
/* RTC_IO_SENSE1_HOLD : R/W ;bitpos:[31] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_SENSE1_HOLD (BIT(31))
#define RTC_IO_SENSE1_HOLD_M (BIT(31))
#define RTC_IO_SENSE1_HOLD_V 0x1
#define RTC_IO_SENSE1_HOLD_S 31
/* RTC_IO_SENSE2_HOLD : R/W ;bitpos:[30] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_SENSE2_HOLD (BIT(30))
#define RTC_IO_SENSE2_HOLD_M (BIT(30))
#define RTC_IO_SENSE2_HOLD_V 0x1
#define RTC_IO_SENSE2_HOLD_S 30
/* RTC_IO_SENSE3_HOLD : R/W ;bitpos:[29] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_SENSE3_HOLD (BIT(29))
#define RTC_IO_SENSE3_HOLD_M (BIT(29))
#define RTC_IO_SENSE3_HOLD_V 0x1
#define RTC_IO_SENSE3_HOLD_S 29
/* RTC_IO_SENSE4_HOLD : R/W ;bitpos:[28] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_SENSE4_HOLD (BIT(28))
#define RTC_IO_SENSE4_HOLD_M (BIT(28))
#define RTC_IO_SENSE4_HOLD_V 0x1
#define RTC_IO_SENSE4_HOLD_S 28
/* RTC_IO_SENSE1_MUX_SEL : R/W ;bitpos:[27] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_SENSE1_MUX_SEL (BIT(27))
#define RTC_IO_SENSE1_MUX_SEL_M (BIT(27))
#define RTC_IO_SENSE1_MUX_SEL_V 0x1
#define RTC_IO_SENSE1_MUX_SEL_S 27
/* RTC_IO_SENSE2_MUX_SEL : R/W ;bitpos:[26] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_SENSE2_MUX_SEL (BIT(26))
#define RTC_IO_SENSE2_MUX_SEL_M (BIT(26))
#define RTC_IO_SENSE2_MUX_SEL_V 0x1
#define RTC_IO_SENSE2_MUX_SEL_S 26
/* RTC_IO_SENSE3_MUX_SEL : R/W ;bitpos:[25] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_SENSE3_MUX_SEL (BIT(25))
#define RTC_IO_SENSE3_MUX_SEL_M (BIT(25))
#define RTC_IO_SENSE3_MUX_SEL_V 0x1
#define RTC_IO_SENSE3_MUX_SEL_S 25
/* RTC_IO_SENSE4_MUX_SEL : R/W ;bitpos:[24] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_SENSE4_MUX_SEL (BIT(24))
#define RTC_IO_SENSE4_MUX_SEL_M (BIT(24))
#define RTC_IO_SENSE4_MUX_SEL_V 0x1
#define RTC_IO_SENSE4_MUX_SEL_S 24
/* RTC_IO_SENSE1_FUN_SEL : R/W ;bitpos:[23:22] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_SENSE1_FUN_SEL 0x00000003
#define RTC_IO_SENSE1_FUN_SEL_M ((RTC_IO_SENSE1_FUN_SEL_V)<<(RTC_IO_SENSE1_FUN_SEL_S))
#define RTC_IO_SENSE1_FUN_SEL_V 0x3
#define RTC_IO_SENSE1_FUN_SEL_S 22
/* RTC_IO_SENSE1_SLP_SEL : R/W ;bitpos:[21] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_SENSE1_SLP_SEL (BIT(21))
#define RTC_IO_SENSE1_SLP_SEL_M (BIT(21))
#define RTC_IO_SENSE1_SLP_SEL_V 0x1
#define RTC_IO_SENSE1_SLP_SEL_S 21
/* RTC_IO_SENSE1_SLP_IE : R/W ;bitpos:[20] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_SENSE1_SLP_IE (BIT(20))
#define RTC_IO_SENSE1_SLP_IE_M (BIT(20))
#define RTC_IO_SENSE1_SLP_IE_V 0x1
#define RTC_IO_SENSE1_SLP_IE_S 20
/* RTC_IO_SENSE1_FUN_IE : R/W ;bitpos:[19] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_SENSE1_FUN_IE (BIT(19))
#define RTC_IO_SENSE1_FUN_IE_M (BIT(19))
#define RTC_IO_SENSE1_FUN_IE_V 0x1
#define RTC_IO_SENSE1_FUN_IE_S 19
/* RTC_IO_SENSE2_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_SENSE2_FUN_SEL 0x00000003
#define RTC_IO_SENSE2_FUN_SEL_M ((RTC_IO_SENSE2_FUN_SEL_V)<<(RTC_IO_SENSE2_FUN_SEL_S))
#define RTC_IO_SENSE2_FUN_SEL_V 0x3
#define RTC_IO_SENSE2_FUN_SEL_S 17
/* RTC_IO_SENSE2_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_SENSE2_SLP_SEL (BIT(16))
#define RTC_IO_SENSE2_SLP_SEL_M (BIT(16))
#define RTC_IO_SENSE2_SLP_SEL_V 0x1
#define RTC_IO_SENSE2_SLP_SEL_S 16
/* RTC_IO_SENSE2_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_SENSE2_SLP_IE (BIT(15))
#define RTC_IO_SENSE2_SLP_IE_M (BIT(15))
#define RTC_IO_SENSE2_SLP_IE_V 0x1
#define RTC_IO_SENSE2_SLP_IE_S 15
/* RTC_IO_SENSE2_FUN_IE : R/W ;bitpos:[14] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_SENSE2_FUN_IE (BIT(14))
#define RTC_IO_SENSE2_FUN_IE_M (BIT(14))
#define RTC_IO_SENSE2_FUN_IE_V 0x1
#define RTC_IO_SENSE2_FUN_IE_S 14
/* RTC_IO_SENSE3_FUN_SEL : R/W ;bitpos:[13:12] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_SENSE3_FUN_SEL 0x00000003
#define RTC_IO_SENSE3_FUN_SEL_M ((RTC_IO_SENSE3_FUN_SEL_V)<<(RTC_IO_SENSE3_FUN_SEL_S))
#define RTC_IO_SENSE3_FUN_SEL_V 0x3
#define RTC_IO_SENSE3_FUN_SEL_S 12
/* RTC_IO_SENSE3_SLP_SEL : R/W ;bitpos:[11] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_SENSE3_SLP_SEL (BIT(11))
#define RTC_IO_SENSE3_SLP_SEL_M (BIT(11))
#define RTC_IO_SENSE3_SLP_SEL_V 0x1
#define RTC_IO_SENSE3_SLP_SEL_S 11
/* RTC_IO_SENSE3_SLP_IE : R/W ;bitpos:[10] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_SENSE3_SLP_IE (BIT(10))
#define RTC_IO_SENSE3_SLP_IE_M (BIT(10))
#define RTC_IO_SENSE3_SLP_IE_V 0x1
#define RTC_IO_SENSE3_SLP_IE_S 10
/* RTC_IO_SENSE3_FUN_IE : R/W ;bitpos:[9] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_SENSE3_FUN_IE (BIT(9))
#define RTC_IO_SENSE3_FUN_IE_M (BIT(9))
#define RTC_IO_SENSE3_FUN_IE_V 0x1
#define RTC_IO_SENSE3_FUN_IE_S 9
/* RTC_IO_SENSE4_FUN_SEL : R/W ;bitpos:[8:7] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_SENSE4_FUN_SEL 0x00000003
#define RTC_IO_SENSE4_FUN_SEL_M ((RTC_IO_SENSE4_FUN_SEL_V)<<(RTC_IO_SENSE4_FUN_SEL_S))
#define RTC_IO_SENSE4_FUN_SEL_V 0x3
#define RTC_IO_SENSE4_FUN_SEL_S 7
/* RTC_IO_SENSE4_SLP_SEL : R/W ;bitpos:[6] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_SENSE4_SLP_SEL (BIT(6))
#define RTC_IO_SENSE4_SLP_SEL_M (BIT(6))
#define RTC_IO_SENSE4_SLP_SEL_V 0x1
#define RTC_IO_SENSE4_SLP_SEL_S 6
/* RTC_IO_SENSE4_SLP_IE : R/W ;bitpos:[5] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_SENSE4_SLP_IE (BIT(5))
#define RTC_IO_SENSE4_SLP_IE_M (BIT(5))
#define RTC_IO_SENSE4_SLP_IE_V 0x1
#define RTC_IO_SENSE4_SLP_IE_S 5
/* RTC_IO_SENSE4_FUN_IE : R/W ;bitpos:[4] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_SENSE4_FUN_IE (BIT(4))
#define RTC_IO_SENSE4_FUN_IE_M (BIT(4))
#define RTC_IO_SENSE4_FUN_IE_V 0x1
#define RTC_IO_SENSE4_FUN_IE_S 4
#define RTC_IO_ADC_PAD_REG (DR_REG_RTCIO_BASE + 0x80)
/* RTC_IO_ADC1_HOLD : R/W ;bitpos:[31] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_ADC1_HOLD (BIT(31))
#define RTC_IO_ADC1_HOLD_M (BIT(31))
#define RTC_IO_ADC1_HOLD_V 0x1
#define RTC_IO_ADC1_HOLD_S 31
/* RTC_IO_ADC2_HOLD : R/W ;bitpos:[30] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_ADC2_HOLD (BIT(30))
#define RTC_IO_ADC2_HOLD_M (BIT(30))
#define RTC_IO_ADC2_HOLD_V 0x1
#define RTC_IO_ADC2_HOLD_S 30
/* RTC_IO_ADC1_MUX_SEL : R/W ;bitpos:[29] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_ADC1_MUX_SEL (BIT(29))
#define RTC_IO_ADC1_MUX_SEL_M (BIT(29))
#define RTC_IO_ADC1_MUX_SEL_V 0x1
#define RTC_IO_ADC1_MUX_SEL_S 29
/* RTC_IO_ADC2_MUX_SEL : R/W ;bitpos:[28] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_ADC2_MUX_SEL (BIT(28))
#define RTC_IO_ADC2_MUX_SEL_M (BIT(28))
#define RTC_IO_ADC2_MUX_SEL_V 0x1
#define RTC_IO_ADC2_MUX_SEL_S 28
/* RTC_IO_ADC1_FUN_SEL : R/W ;bitpos:[27:26] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_ADC1_FUN_SEL 0x00000003
#define RTC_IO_ADC1_FUN_SEL_M ((RTC_IO_ADC1_FUN_SEL_V)<<(RTC_IO_ADC1_FUN_SEL_S))
#define RTC_IO_ADC1_FUN_SEL_V 0x3
#define RTC_IO_ADC1_FUN_SEL_S 26
/* RTC_IO_ADC1_SLP_SEL : R/W ;bitpos:[25] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_ADC1_SLP_SEL (BIT(25))
#define RTC_IO_ADC1_SLP_SEL_M (BIT(25))
#define RTC_IO_ADC1_SLP_SEL_V 0x1
#define RTC_IO_ADC1_SLP_SEL_S 25
/* RTC_IO_ADC1_SLP_IE : R/W ;bitpos:[24] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_ADC1_SLP_IE (BIT(24))
#define RTC_IO_ADC1_SLP_IE_M (BIT(24))
#define RTC_IO_ADC1_SLP_IE_V 0x1
#define RTC_IO_ADC1_SLP_IE_S 24
/* RTC_IO_ADC1_FUN_IE : R/W ;bitpos:[23] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_ADC1_FUN_IE (BIT(23))
#define RTC_IO_ADC1_FUN_IE_M (BIT(23))
#define RTC_IO_ADC1_FUN_IE_V 0x1
#define RTC_IO_ADC1_FUN_IE_S 23
/* RTC_IO_ADC2_FUN_SEL : R/W ;bitpos:[22:21] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_ADC2_FUN_SEL 0x00000003
#define RTC_IO_ADC2_FUN_SEL_M ((RTC_IO_ADC2_FUN_SEL_V)<<(RTC_IO_ADC2_FUN_SEL_S))
#define RTC_IO_ADC2_FUN_SEL_V 0x3
#define RTC_IO_ADC2_FUN_SEL_S 21
/* RTC_IO_ADC2_SLP_SEL : R/W ;bitpos:[20] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_ADC2_SLP_SEL (BIT(20))
#define RTC_IO_ADC2_SLP_SEL_M (BIT(20))
#define RTC_IO_ADC2_SLP_SEL_V 0x1
#define RTC_IO_ADC2_SLP_SEL_S 20
/* RTC_IO_ADC2_SLP_IE : R/W ;bitpos:[19] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_ADC2_SLP_IE (BIT(19))
#define RTC_IO_ADC2_SLP_IE_M (BIT(19))
#define RTC_IO_ADC2_SLP_IE_V 0x1
#define RTC_IO_ADC2_SLP_IE_S 19
/* RTC_IO_ADC2_FUN_IE : R/W ;bitpos:[18] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_ADC2_FUN_IE (BIT(18))
#define RTC_IO_ADC2_FUN_IE_M (BIT(18))
#define RTC_IO_ADC2_FUN_IE_V 0x1
#define RTC_IO_ADC2_FUN_IE_S 18
#define RTC_IO_PAD_DAC1_REG (DR_REG_RTCIO_BASE + 0x84)
/* RTC_IO_PDAC1_DRV : R/W ;bitpos:[31:30] ;default: 2'd2 ; */
/*description: the driver strength of the pad*/
#define RTC_IO_PDAC1_DRV 0x00000003
#define RTC_IO_PDAC1_DRV_M ((RTC_IO_PDAC1_DRV_V)<<(RTC_IO_PDAC1_DRV_S))
#define RTC_IO_PDAC1_DRV_V 0x3
#define RTC_IO_PDAC1_DRV_S 30
/* RTC_IO_PDAC1_HOLD : R/W ;bitpos:[29] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_PDAC1_HOLD (BIT(29))
#define RTC_IO_PDAC1_HOLD_M (BIT(29))
#define RTC_IO_PDAC1_HOLD_V 0x1
#define RTC_IO_PDAC1_HOLD_S 29
/* RTC_IO_PDAC1_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
/*description: the pull down enable of the pad*/
#define RTC_IO_PDAC1_RDE (BIT(28))
#define RTC_IO_PDAC1_RDE_M (BIT(28))
#define RTC_IO_PDAC1_RDE_V 0x1
#define RTC_IO_PDAC1_RDE_S 28
/* RTC_IO_PDAC1_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
/*description: the pull up enable of the pad*/
#define RTC_IO_PDAC1_RUE (BIT(27))
#define RTC_IO_PDAC1_RUE_M (BIT(27))
#define RTC_IO_PDAC1_RUE_V 0x1
#define RTC_IO_PDAC1_RUE_S 27
/* RTC_IO_PDAC1_DAC : R/W ;bitpos:[26:19] ;default: 8'd0 ; */
/*description: PAD DAC1 control code.*/
#define RTC_IO_PDAC1_DAC 0x000000FF
#define RTC_IO_PDAC1_DAC_M ((RTC_IO_PDAC1_DAC_V)<<(RTC_IO_PDAC1_DAC_S))
#define RTC_IO_PDAC1_DAC_V 0xFF
#define RTC_IO_PDAC1_DAC_S 19
/* RTC_IO_PDAC1_XPD_DAC : R/W ;bitpos:[18] ;default: 1'd0 ; */
/*description: Power on DAC1. Usually we need to tristate PDAC1 if we power
on the DAC i.e. IE=0 OE=0 RDE=0 RUE=0*/
#define RTC_IO_PDAC1_XPD_DAC (BIT(18))
#define RTC_IO_PDAC1_XPD_DAC_M (BIT(18))
#define RTC_IO_PDAC1_XPD_DAC_V 0x1
#define RTC_IO_PDAC1_XPD_DAC_S 18
/* RTC_IO_PDAC1_MUX_SEL : R/W ;bitpos:[17] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_PDAC1_MUX_SEL (BIT(17))
#define RTC_IO_PDAC1_MUX_SEL_M (BIT(17))
#define RTC_IO_PDAC1_MUX_SEL_V 0x1
#define RTC_IO_PDAC1_MUX_SEL_S 17
/* RTC_IO_PDAC1_FUN_SEL : R/W ;bitpos:[16:15] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_PDAC1_FUN_SEL 0x00000003
#define RTC_IO_PDAC1_FUN_SEL_M ((RTC_IO_PDAC1_FUN_SEL_V)<<(RTC_IO_PDAC1_FUN_SEL_S))
#define RTC_IO_PDAC1_FUN_SEL_V 0x3
#define RTC_IO_PDAC1_FUN_SEL_S 15
/* RTC_IO_PDAC1_SLP_SEL : R/W ;bitpos:[14] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_PDAC1_SLP_SEL (BIT(14))
#define RTC_IO_PDAC1_SLP_SEL_M (BIT(14))
#define RTC_IO_PDAC1_SLP_SEL_V 0x1
#define RTC_IO_PDAC1_SLP_SEL_S 14
/* RTC_IO_PDAC1_SLP_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_PDAC1_SLP_IE (BIT(13))
#define RTC_IO_PDAC1_SLP_IE_M (BIT(13))
#define RTC_IO_PDAC1_SLP_IE_V 0x1
#define RTC_IO_PDAC1_SLP_IE_S 13
/* RTC_IO_PDAC1_SLP_OE : R/W ;bitpos:[12] ;default: 1'd0 ; */
/*description: the output enable of the pad in sleep status*/
#define RTC_IO_PDAC1_SLP_OE (BIT(12))
#define RTC_IO_PDAC1_SLP_OE_M (BIT(12))
#define RTC_IO_PDAC1_SLP_OE_V 0x1
#define RTC_IO_PDAC1_SLP_OE_S 12
/* RTC_IO_PDAC1_FUN_IE : R/W ;bitpos:[11] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_PDAC1_FUN_IE (BIT(11))
#define RTC_IO_PDAC1_FUN_IE_M (BIT(11))
#define RTC_IO_PDAC1_FUN_IE_V 0x1
#define RTC_IO_PDAC1_FUN_IE_S 11
/* RTC_IO_PDAC1_DAC_XPD_FORCE : R/W ;bitpos:[10] ;default: 1'd0 ; */
/*description: Power on DAC1. Usually we need to tristate PDAC1 if we power
on the DAC i.e. IE=0 OE=0 RDE=0 RUE=0*/
#define RTC_IO_PDAC1_DAC_XPD_FORCE (BIT(10))
#define RTC_IO_PDAC1_DAC_XPD_FORCE_M (BIT(10))
#define RTC_IO_PDAC1_DAC_XPD_FORCE_V 0x1
#define RTC_IO_PDAC1_DAC_XPD_FORCE_S 10
#define RTC_IO_PAD_DAC2_REG (DR_REG_RTCIO_BASE + 0x88)
/* RTC_IO_PDAC2_DRV : R/W ;bitpos:[31:30] ;default: 2'd2 ; */
/*description: the driver strength of the pad*/
#define RTC_IO_PDAC2_DRV 0x00000003
#define RTC_IO_PDAC2_DRV_M ((RTC_IO_PDAC2_DRV_V)<<(RTC_IO_PDAC2_DRV_S))
#define RTC_IO_PDAC2_DRV_V 0x3
#define RTC_IO_PDAC2_DRV_S 30
/* RTC_IO_PDAC2_HOLD : R/W ;bitpos:[29] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_PDAC2_HOLD (BIT(29))
#define RTC_IO_PDAC2_HOLD_M (BIT(29))
#define RTC_IO_PDAC2_HOLD_V 0x1
#define RTC_IO_PDAC2_HOLD_S 29
/* RTC_IO_PDAC2_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
/*description: the pull down enable of the pad*/
#define RTC_IO_PDAC2_RDE (BIT(28))
#define RTC_IO_PDAC2_RDE_M (BIT(28))
#define RTC_IO_PDAC2_RDE_V 0x1
#define RTC_IO_PDAC2_RDE_S 28
/* RTC_IO_PDAC2_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
/*description: the pull up enable of the pad*/
#define RTC_IO_PDAC2_RUE (BIT(27))
#define RTC_IO_PDAC2_RUE_M (BIT(27))
#define RTC_IO_PDAC2_RUE_V 0x1
#define RTC_IO_PDAC2_RUE_S 27
/* RTC_IO_PDAC2_DAC : R/W ;bitpos:[26:19] ;default: 8'd0 ; */
/*description: PAD DAC2 control code.*/
#define RTC_IO_PDAC2_DAC 0x000000FF
#define RTC_IO_PDAC2_DAC_M ((RTC_IO_PDAC2_DAC_V)<<(RTC_IO_PDAC2_DAC_S))
#define RTC_IO_PDAC2_DAC_V 0xFF
#define RTC_IO_PDAC2_DAC_S 19
/* RTC_IO_PDAC2_XPD_DAC : R/W ;bitpos:[18] ;default: 1'd0 ; */
/*description: Power on DAC2. Usually we need to tristate PDAC1 if we power
on the DAC i.e. IE=0 OE=0 RDE=0 RUE=0*/
#define RTC_IO_PDAC2_XPD_DAC (BIT(18))
#define RTC_IO_PDAC2_XPD_DAC_M (BIT(18))
#define RTC_IO_PDAC2_XPD_DAC_V 0x1
#define RTC_IO_PDAC2_XPD_DAC_S 18
/* RTC_IO_PDAC2_MUX_SEL : R/W ;bitpos:[17] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_PDAC2_MUX_SEL (BIT(17))
#define RTC_IO_PDAC2_MUX_SEL_M (BIT(17))
#define RTC_IO_PDAC2_MUX_SEL_V 0x1
#define RTC_IO_PDAC2_MUX_SEL_S 17
/* RTC_IO_PDAC2_FUN_SEL : R/W ;bitpos:[16:15] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_PDAC2_FUN_SEL 0x00000003
#define RTC_IO_PDAC2_FUN_SEL_M ((RTC_IO_PDAC2_FUN_SEL_V)<<(RTC_IO_PDAC2_FUN_SEL_S))
#define RTC_IO_PDAC2_FUN_SEL_V 0x3
#define RTC_IO_PDAC2_FUN_SEL_S 15
/* RTC_IO_PDAC2_SLP_SEL : R/W ;bitpos:[14] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_PDAC2_SLP_SEL (BIT(14))
#define RTC_IO_PDAC2_SLP_SEL_M (BIT(14))
#define RTC_IO_PDAC2_SLP_SEL_V 0x1
#define RTC_IO_PDAC2_SLP_SEL_S 14
/* RTC_IO_PDAC2_SLP_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_PDAC2_SLP_IE (BIT(13))
#define RTC_IO_PDAC2_SLP_IE_M (BIT(13))
#define RTC_IO_PDAC2_SLP_IE_V 0x1
#define RTC_IO_PDAC2_SLP_IE_S 13
/* RTC_IO_PDAC2_SLP_OE : R/W ;bitpos:[12] ;default: 1'd0 ; */
/*description: the output enable of the pad in sleep status*/
#define RTC_IO_PDAC2_SLP_OE (BIT(12))
#define RTC_IO_PDAC2_SLP_OE_M (BIT(12))
#define RTC_IO_PDAC2_SLP_OE_V 0x1
#define RTC_IO_PDAC2_SLP_OE_S 12
/* RTC_IO_PDAC2_FUN_IE : R/W ;bitpos:[11] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_PDAC2_FUN_IE (BIT(11))
#define RTC_IO_PDAC2_FUN_IE_M (BIT(11))
#define RTC_IO_PDAC2_FUN_IE_V 0x1
#define RTC_IO_PDAC2_FUN_IE_S 11
/* RTC_IO_PDAC2_DAC_XPD_FORCE : R/W ;bitpos:[10] ;default: 1'd0 ; */
/*description: Power on DAC2. Usually we need to tristate PDAC2 if we power
on the DAC i.e. IE=0 OE=0 RDE=0 RUE=0*/
#define RTC_IO_PDAC2_DAC_XPD_FORCE (BIT(10))
#define RTC_IO_PDAC2_DAC_XPD_FORCE_M (BIT(10))
#define RTC_IO_PDAC2_DAC_XPD_FORCE_V 0x1
#define RTC_IO_PDAC2_DAC_XPD_FORCE_S 10
#define RTC_IO_XTAL_32K_PAD_REG (DR_REG_RTCIO_BASE + 0x8c)
/* RTC_IO_X32N_DRV : R/W ;bitpos:[31:30] ;default: 2'd2 ; */
/*description: the driver strength of the pad*/
#define RTC_IO_X32N_DRV 0x00000003
#define RTC_IO_X32N_DRV_M ((RTC_IO_X32N_DRV_V)<<(RTC_IO_X32N_DRV_S))
#define RTC_IO_X32N_DRV_V 0x3
#define RTC_IO_X32N_DRV_S 30
/* RTC_IO_X32N_HOLD : R/W ;bitpos:[29] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_X32N_HOLD (BIT(29))
#define RTC_IO_X32N_HOLD_M (BIT(29))
#define RTC_IO_X32N_HOLD_V 0x1
#define RTC_IO_X32N_HOLD_S 29
/* RTC_IO_X32N_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
/*description: the pull down enable of the pad*/
#define RTC_IO_X32N_RDE (BIT(28))
#define RTC_IO_X32N_RDE_M (BIT(28))
#define RTC_IO_X32N_RDE_V 0x1
#define RTC_IO_X32N_RDE_S 28
/* RTC_IO_X32N_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
/*description: the pull up enable of the pad*/
#define RTC_IO_X32N_RUE (BIT(27))
#define RTC_IO_X32N_RUE_M (BIT(27))
#define RTC_IO_X32N_RUE_V 0x1
#define RTC_IO_X32N_RUE_S 27
/* RTC_IO_X32P_DRV : R/W ;bitpos:[26:25] ;default: 2'd2 ; */
/*description: the driver strength of the pad*/
#define RTC_IO_X32P_DRV 0x00000003
#define RTC_IO_X32P_DRV_M ((RTC_IO_X32P_DRV_V)<<(RTC_IO_X32P_DRV_S))
#define RTC_IO_X32P_DRV_V 0x3
#define RTC_IO_X32P_DRV_S 25
/* RTC_IO_X32P_HOLD : R/W ;bitpos:[24] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_X32P_HOLD (BIT(24))
#define RTC_IO_X32P_HOLD_M (BIT(24))
#define RTC_IO_X32P_HOLD_V 0x1
#define RTC_IO_X32P_HOLD_S 24
/* RTC_IO_X32P_RDE : R/W ;bitpos:[23] ;default: 1'd0 ; */
/*description: the pull down enable of the pad*/
#define RTC_IO_X32P_RDE (BIT(23))
#define RTC_IO_X32P_RDE_M (BIT(23))
#define RTC_IO_X32P_RDE_V 0x1
#define RTC_IO_X32P_RDE_S 23
/* RTC_IO_X32P_RUE : R/W ;bitpos:[22] ;default: 1'd0 ; */
/*description: the pull up enable of the pad*/
#define RTC_IO_X32P_RUE (BIT(22))
#define RTC_IO_X32P_RUE_M (BIT(22))
#define RTC_IO_X32P_RUE_V 0x1
#define RTC_IO_X32P_RUE_S 22
/* RTC_IO_DAC_XTAL_32K : R/W ;bitpos:[21:20] ;default: 2'b01 ; */
/*description: 32K XTAL bias current DAC.*/
#define RTC_IO_DAC_XTAL_32K 0x00000003
#define RTC_IO_DAC_XTAL_32K_M ((RTC_IO_DAC_XTAL_32K_V)<<(RTC_IO_DAC_XTAL_32K_S))
#define RTC_IO_DAC_XTAL_32K_V 0x3
#define RTC_IO_DAC_XTAL_32K_S 20
/* RTC_IO_XPD_XTAL_32K : R/W ;bitpos:[19] ;default: 1'd0 ; */
/*description: Power up 32kHz crystal oscillator*/
#define RTC_IO_XPD_XTAL_32K (BIT(19))
#define RTC_IO_XPD_XTAL_32K_M (BIT(19))
#define RTC_IO_XPD_XTAL_32K_V 0x1
#define RTC_IO_XPD_XTAL_32K_S 19
/* RTC_IO_X32N_MUX_SEL : R/W ;bitpos:[18] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_X32N_MUX_SEL (BIT(18))
#define RTC_IO_X32N_MUX_SEL_M (BIT(18))
#define RTC_IO_X32N_MUX_SEL_V 0x1
#define RTC_IO_X32N_MUX_SEL_S 18
/* RTC_IO_X32P_MUX_SEL : R/W ;bitpos:[17] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_X32P_MUX_SEL (BIT(17))
#define RTC_IO_X32P_MUX_SEL_M (BIT(17))
#define RTC_IO_X32P_MUX_SEL_V 0x1
#define RTC_IO_X32P_MUX_SEL_S 17
/* RTC_IO_X32N_FUN_SEL : R/W ;bitpos:[16:15] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_X32N_FUN_SEL 0x00000003
#define RTC_IO_X32N_FUN_SEL_M ((RTC_IO_X32N_FUN_SEL_V)<<(RTC_IO_X32N_FUN_SEL_S))
#define RTC_IO_X32N_FUN_SEL_V 0x3
#define RTC_IO_X32N_FUN_SEL_S 15
/* RTC_IO_X32N_SLP_SEL : R/W ;bitpos:[14] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_X32N_SLP_SEL (BIT(14))
#define RTC_IO_X32N_SLP_SEL_M (BIT(14))
#define RTC_IO_X32N_SLP_SEL_V 0x1
#define RTC_IO_X32N_SLP_SEL_S 14
/* RTC_IO_X32N_SLP_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_X32N_SLP_IE (BIT(13))
#define RTC_IO_X32N_SLP_IE_M (BIT(13))
#define RTC_IO_X32N_SLP_IE_V 0x1
#define RTC_IO_X32N_SLP_IE_S 13
/* RTC_IO_X32N_SLP_OE : R/W ;bitpos:[12] ;default: 1'd0 ; */
/*description: the output enable of the pad in sleep status*/
#define RTC_IO_X32N_SLP_OE (BIT(12))
#define RTC_IO_X32N_SLP_OE_M (BIT(12))
#define RTC_IO_X32N_SLP_OE_V 0x1
#define RTC_IO_X32N_SLP_OE_S 12
/* RTC_IO_X32N_FUN_IE : R/W ;bitpos:[11] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_X32N_FUN_IE (BIT(11))
#define RTC_IO_X32N_FUN_IE_M (BIT(11))
#define RTC_IO_X32N_FUN_IE_V 0x1
#define RTC_IO_X32N_FUN_IE_S 11
/* RTC_IO_X32P_FUN_SEL : R/W ;bitpos:[10:9] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_X32P_FUN_SEL 0x00000003
#define RTC_IO_X32P_FUN_SEL_M ((RTC_IO_X32P_FUN_SEL_V)<<(RTC_IO_X32P_FUN_SEL_S))
#define RTC_IO_X32P_FUN_SEL_V 0x3
#define RTC_IO_X32P_FUN_SEL_S 9
/* RTC_IO_X32P_SLP_SEL : R/W ;bitpos:[8] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_X32P_SLP_SEL (BIT(8))
#define RTC_IO_X32P_SLP_SEL_M (BIT(8))
#define RTC_IO_X32P_SLP_SEL_V 0x1
#define RTC_IO_X32P_SLP_SEL_S 8
/* RTC_IO_X32P_SLP_IE : R/W ;bitpos:[7] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_X32P_SLP_IE (BIT(7))
#define RTC_IO_X32P_SLP_IE_M (BIT(7))
#define RTC_IO_X32P_SLP_IE_V 0x1
#define RTC_IO_X32P_SLP_IE_S 7
/* RTC_IO_X32P_SLP_OE : R/W ;bitpos:[6] ;default: 1'd0 ; */
/*description: the output enable of the pad in sleep status*/
#define RTC_IO_X32P_SLP_OE (BIT(6))
#define RTC_IO_X32P_SLP_OE_M (BIT(6))
#define RTC_IO_X32P_SLP_OE_V 0x1
#define RTC_IO_X32P_SLP_OE_S 6
/* RTC_IO_X32P_FUN_IE : R/W ;bitpos:[5] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_X32P_FUN_IE (BIT(5))
#define RTC_IO_X32P_FUN_IE_M (BIT(5))
#define RTC_IO_X32P_FUN_IE_V 0x1
#define RTC_IO_X32P_FUN_IE_S 5
/* RTC_IO_DRES_XTAL_32K : R/W ;bitpos:[4:3] ;default: 2'b10 ; */
/*description: 32K XTAL resistor bias control.*/
#define RTC_IO_DRES_XTAL_32K 0x00000003
#define RTC_IO_DRES_XTAL_32K_M ((RTC_IO_DRES_XTAL_32K_V)<<(RTC_IO_DRES_XTAL_32K_S))
#define RTC_IO_DRES_XTAL_32K_V 0x3
#define RTC_IO_DRES_XTAL_32K_S 3
/* RTC_IO_DBIAS_XTAL_32K : R/W ;bitpos:[2:1] ;default: 2'b00 ; */
/*description: 32K XTAL self-bias reference control.*/
#define RTC_IO_DBIAS_XTAL_32K 0x00000003
#define RTC_IO_DBIAS_XTAL_32K_M ((RTC_IO_DBIAS_XTAL_32K_V)<<(RTC_IO_DBIAS_XTAL_32K_S))
#define RTC_IO_DBIAS_XTAL_32K_V 0x3
#define RTC_IO_DBIAS_XTAL_32K_S 1
#define RTC_IO_TOUCH_CFG_REG (DR_REG_RTCIO_BASE + 0x90)
/* RTC_IO_TOUCH_XPD_BIAS : R/W ;bitpos:[31] ;default: 1'd0 ; */
/*description: touch sensor bias power on.*/
#define RTC_IO_TOUCH_XPD_BIAS (BIT(31))
#define RTC_IO_TOUCH_XPD_BIAS_M (BIT(31))
#define RTC_IO_TOUCH_XPD_BIAS_V 0x1
#define RTC_IO_TOUCH_XPD_BIAS_S 31
/* RTC_IO_TOUCH_DREFH : R/W ;bitpos:[30:29] ;default: 2'b11 ; */
/*description: touch sensor saw wave top voltage.*/
#define RTC_IO_TOUCH_DREFH 0x00000003
#define RTC_IO_TOUCH_DREFH_M ((RTC_IO_TOUCH_DREFH_V)<<(RTC_IO_TOUCH_DREFH_S))
#define RTC_IO_TOUCH_DREFH_V 0x3
#define RTC_IO_TOUCH_DREFH_S 29
/* RTC_IO_TOUCH_DREFL : R/W ;bitpos:[28:27] ;default: 2'b00 ; */
/*description: touch sensor saw wave bottom voltage.*/
#define RTC_IO_TOUCH_DREFL 0x00000003
#define RTC_IO_TOUCH_DREFL_M ((RTC_IO_TOUCH_DREFL_V)<<(RTC_IO_TOUCH_DREFL_S))
#define RTC_IO_TOUCH_DREFL_V 0x3
#define RTC_IO_TOUCH_DREFL_S 27
/* RTC_IO_TOUCH_DRANGE : R/W ;bitpos:[26:25] ;default: 2'b11 ; */
/*description: touch sensor saw wave voltage range.*/
#define RTC_IO_TOUCH_DRANGE 0x00000003
#define RTC_IO_TOUCH_DRANGE_M ((RTC_IO_TOUCH_DRANGE_V)<<(RTC_IO_TOUCH_DRANGE_S))
#define RTC_IO_TOUCH_DRANGE_V 0x3
#define RTC_IO_TOUCH_DRANGE_S 25
/* RTC_IO_TOUCH_DCUR : R/W ;bitpos:[24:23] ;default: 2'b00 ; */
/*description: touch sensor bias current. Should have option to tie with BIAS_SLEEP(When
BIAS_SLEEP this setting is available*/
#define RTC_IO_TOUCH_DCUR 0x00000003
#define RTC_IO_TOUCH_DCUR_M ((RTC_IO_TOUCH_DCUR_V)<<(RTC_IO_TOUCH_DCUR_S))
#define RTC_IO_TOUCH_DCUR_V 0x3
#define RTC_IO_TOUCH_DCUR_S 23
#define RTC_IO_TOUCH_PAD0_REG (DR_REG_RTCIO_BASE + 0x94)
/* RTC_IO_TOUCH_PAD0_HOLD : R/W ;bitpos:[31] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_TOUCH_PAD0_HOLD (BIT(31))
#define RTC_IO_TOUCH_PAD0_HOLD_M (BIT(31))
#define RTC_IO_TOUCH_PAD0_HOLD_V 0x1
#define RTC_IO_TOUCH_PAD0_HOLD_S 31
/* RTC_IO_TOUCH_PAD0_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
/*description: the driver strength of the pad*/
#define RTC_IO_TOUCH_PAD0_DRV 0x00000003
#define RTC_IO_TOUCH_PAD0_DRV_M ((RTC_IO_TOUCH_PAD0_DRV_V)<<(RTC_IO_TOUCH_PAD0_DRV_S))
#define RTC_IO_TOUCH_PAD0_DRV_V 0x3
#define RTC_IO_TOUCH_PAD0_DRV_S 29
/* RTC_IO_TOUCH_PAD0_RDE : R/W ;bitpos:[28] ;default: 1'd1 ; */
/*description: the pull down enable of the pad*/
#define RTC_IO_TOUCH_PAD0_RDE (BIT(28))
#define RTC_IO_TOUCH_PAD0_RDE_M (BIT(28))
#define RTC_IO_TOUCH_PAD0_RDE_V 0x1
#define RTC_IO_TOUCH_PAD0_RDE_S 28
/* RTC_IO_TOUCH_PAD0_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
/*description: the pull up enable of the pad*/
#define RTC_IO_TOUCH_PAD0_RUE (BIT(27))
#define RTC_IO_TOUCH_PAD0_RUE_M (BIT(27))
#define RTC_IO_TOUCH_PAD0_RUE_V 0x1
#define RTC_IO_TOUCH_PAD0_RUE_S 27
/* RTC_IO_TOUCH_PAD0_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
/*description: touch sensor slope control. 3-bit for each touch panel default 100.*/
#define RTC_IO_TOUCH_PAD0_DAC 0x00000007
#define RTC_IO_TOUCH_PAD0_DAC_M ((RTC_IO_TOUCH_PAD0_DAC_V)<<(RTC_IO_TOUCH_PAD0_DAC_S))
#define RTC_IO_TOUCH_PAD0_DAC_V 0x7
#define RTC_IO_TOUCH_PAD0_DAC_S 23
/* RTC_IO_TOUCH_PAD0_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
/*description: start touch sensor.*/
#define RTC_IO_TOUCH_PAD0_START (BIT(22))
#define RTC_IO_TOUCH_PAD0_START_M (BIT(22))
#define RTC_IO_TOUCH_PAD0_START_V 0x1
#define RTC_IO_TOUCH_PAD0_START_S 22
/* RTC_IO_TOUCH_PAD0_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
/*description: default touch sensor tie option. 0: tie low 1: tie high.*/
#define RTC_IO_TOUCH_PAD0_TIE_OPT (BIT(21))
#define RTC_IO_TOUCH_PAD0_TIE_OPT_M (BIT(21))
#define RTC_IO_TOUCH_PAD0_TIE_OPT_V 0x1
#define RTC_IO_TOUCH_PAD0_TIE_OPT_S 21
/* RTC_IO_TOUCH_PAD0_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
/*description: touch sensor power on.*/
#define RTC_IO_TOUCH_PAD0_XPD (BIT(20))
#define RTC_IO_TOUCH_PAD0_XPD_M (BIT(20))
#define RTC_IO_TOUCH_PAD0_XPD_V 0x1
#define RTC_IO_TOUCH_PAD0_XPD_S 20
/* RTC_IO_TOUCH_PAD0_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_TOUCH_PAD0_MUX_SEL (BIT(19))
#define RTC_IO_TOUCH_PAD0_MUX_SEL_M (BIT(19))
#define RTC_IO_TOUCH_PAD0_MUX_SEL_V 0x1
#define RTC_IO_TOUCH_PAD0_MUX_SEL_S 19
/* RTC_IO_TOUCH_PAD0_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_TOUCH_PAD0_FUN_SEL 0x00000003
#define RTC_IO_TOUCH_PAD0_FUN_SEL_M ((RTC_IO_TOUCH_PAD0_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD0_FUN_SEL_S))
#define RTC_IO_TOUCH_PAD0_FUN_SEL_V 0x3
#define RTC_IO_TOUCH_PAD0_FUN_SEL_S 17
/* RTC_IO_TOUCH_PAD0_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_TOUCH_PAD0_SLP_SEL (BIT(16))
#define RTC_IO_TOUCH_PAD0_SLP_SEL_M (BIT(16))
#define RTC_IO_TOUCH_PAD0_SLP_SEL_V 0x1
#define RTC_IO_TOUCH_PAD0_SLP_SEL_S 16
/* RTC_IO_TOUCH_PAD0_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD0_SLP_IE (BIT(15))
#define RTC_IO_TOUCH_PAD0_SLP_IE_M (BIT(15))
#define RTC_IO_TOUCH_PAD0_SLP_IE_V 0x1
#define RTC_IO_TOUCH_PAD0_SLP_IE_S 15
/* RTC_IO_TOUCH_PAD0_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
/*description: the output enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD0_SLP_OE (BIT(14))
#define RTC_IO_TOUCH_PAD0_SLP_OE_M (BIT(14))
#define RTC_IO_TOUCH_PAD0_SLP_OE_V 0x1
#define RTC_IO_TOUCH_PAD0_SLP_OE_S 14
/* RTC_IO_TOUCH_PAD0_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_TOUCH_PAD0_FUN_IE (BIT(13))
#define RTC_IO_TOUCH_PAD0_FUN_IE_M (BIT(13))
#define RTC_IO_TOUCH_PAD0_FUN_IE_V 0x1
#define RTC_IO_TOUCH_PAD0_FUN_IE_S 13
/* RTC_IO_TOUCH_PAD0_TO_GPIO : R/W ;bitpos:[12] ;default: 1'd0 ; */
/*description: connect the rtc pad input to digital pad input Ó0Ó is availbale GPIO4*/
#define RTC_IO_TOUCH_PAD0_TO_GPIO (BIT(12))
#define RTC_IO_TOUCH_PAD0_TO_GPIO_M (BIT(12))
#define RTC_IO_TOUCH_PAD0_TO_GPIO_V 0x1
#define RTC_IO_TOUCH_PAD0_TO_GPIO_S 12
#define RTC_IO_TOUCH_PAD1_REG (DR_REG_RTCIO_BASE + 0x98)
/* RTC_IO_TOUCH_PAD1_HOLD : R/W ;bitpos:[31] ;default: 1'd0 ; */
/*description: */
#define RTC_IO_TOUCH_PAD1_HOLD (BIT(31))
#define RTC_IO_TOUCH_PAD1_HOLD_M (BIT(31))
#define RTC_IO_TOUCH_PAD1_HOLD_V 0x1
#define RTC_IO_TOUCH_PAD1_HOLD_S 31
/* RTC_IO_TOUCH_PAD1_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
/*description: the driver strength of the pad*/
#define RTC_IO_TOUCH_PAD1_DRV 0x00000003
#define RTC_IO_TOUCH_PAD1_DRV_M ((RTC_IO_TOUCH_PAD1_DRV_V)<<(RTC_IO_TOUCH_PAD1_DRV_S))
#define RTC_IO_TOUCH_PAD1_DRV_V 0x3
#define RTC_IO_TOUCH_PAD1_DRV_S 29
/* RTC_IO_TOUCH_PAD1_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
/*description: the pull down enable of the pad*/
#define RTC_IO_TOUCH_PAD1_RDE (BIT(28))
#define RTC_IO_TOUCH_PAD1_RDE_M (BIT(28))
#define RTC_IO_TOUCH_PAD1_RDE_V 0x1
#define RTC_IO_TOUCH_PAD1_RDE_S 28
/* RTC_IO_TOUCH_PAD1_RUE : R/W ;bitpos:[27] ;default: 1'd1 ; */
/*description: the pull up enable of the pad*/
#define RTC_IO_TOUCH_PAD1_RUE (BIT(27))
#define RTC_IO_TOUCH_PAD1_RUE_M (BIT(27))
#define RTC_IO_TOUCH_PAD1_RUE_V 0x1
#define RTC_IO_TOUCH_PAD1_RUE_S 27
/* RTC_IO_TOUCH_PAD1_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
/*description: touch sensor slope control. 3-bit for each touch panel default 100.*/
#define RTC_IO_TOUCH_PAD1_DAC 0x00000007
#define RTC_IO_TOUCH_PAD1_DAC_M ((RTC_IO_TOUCH_PAD1_DAC_V)<<(RTC_IO_TOUCH_PAD1_DAC_S))
#define RTC_IO_TOUCH_PAD1_DAC_V 0x7
#define RTC_IO_TOUCH_PAD1_DAC_S 23
/* RTC_IO_TOUCH_PAD1_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
/*description: start touch sensor.*/
#define RTC_IO_TOUCH_PAD1_START (BIT(22))
#define RTC_IO_TOUCH_PAD1_START_M (BIT(22))
#define RTC_IO_TOUCH_PAD1_START_V 0x1
#define RTC_IO_TOUCH_PAD1_START_S 22
/* RTC_IO_TOUCH_PAD1_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
/*description: default touch sensor tie option. 0: tie low 1: tie high.*/
#define RTC_IO_TOUCH_PAD1_TIE_OPT (BIT(21))
#define RTC_IO_TOUCH_PAD1_TIE_OPT_M (BIT(21))
#define RTC_IO_TOUCH_PAD1_TIE_OPT_V 0x1
#define RTC_IO_TOUCH_PAD1_TIE_OPT_S 21
/* RTC_IO_TOUCH_PAD1_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
/*description: touch sensor power on.*/
#define RTC_IO_TOUCH_PAD1_XPD (BIT(20))
#define RTC_IO_TOUCH_PAD1_XPD_M (BIT(20))
#define RTC_IO_TOUCH_PAD1_XPD_V 0x1
#define RTC_IO_TOUCH_PAD1_XPD_S 20
/* RTC_IO_TOUCH_PAD1_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_TOUCH_PAD1_MUX_SEL (BIT(19))
#define RTC_IO_TOUCH_PAD1_MUX_SEL_M (BIT(19))
#define RTC_IO_TOUCH_PAD1_MUX_SEL_V 0x1
#define RTC_IO_TOUCH_PAD1_MUX_SEL_S 19
/* RTC_IO_TOUCH_PAD1_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_TOUCH_PAD1_FUN_SEL 0x00000003
#define RTC_IO_TOUCH_PAD1_FUN_SEL_M ((RTC_IO_TOUCH_PAD1_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD1_FUN_SEL_S))
#define RTC_IO_TOUCH_PAD1_FUN_SEL_V 0x3
#define RTC_IO_TOUCH_PAD1_FUN_SEL_S 17
/* RTC_IO_TOUCH_PAD1_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_TOUCH_PAD1_SLP_SEL (BIT(16))
#define RTC_IO_TOUCH_PAD1_SLP_SEL_M (BIT(16))
#define RTC_IO_TOUCH_PAD1_SLP_SEL_V 0x1
#define RTC_IO_TOUCH_PAD1_SLP_SEL_S 16
/* RTC_IO_TOUCH_PAD1_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD1_SLP_IE (BIT(15))
#define RTC_IO_TOUCH_PAD1_SLP_IE_M (BIT(15))
#define RTC_IO_TOUCH_PAD1_SLP_IE_V 0x1
#define RTC_IO_TOUCH_PAD1_SLP_IE_S 15
/* RTC_IO_TOUCH_PAD1_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
/*description: the output enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD1_SLP_OE (BIT(14))
#define RTC_IO_TOUCH_PAD1_SLP_OE_M (BIT(14))
#define RTC_IO_TOUCH_PAD1_SLP_OE_V 0x1
#define RTC_IO_TOUCH_PAD1_SLP_OE_S 14
/* RTC_IO_TOUCH_PAD1_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_TOUCH_PAD1_FUN_IE (BIT(13))
#define RTC_IO_TOUCH_PAD1_FUN_IE_M (BIT(13))
#define RTC_IO_TOUCH_PAD1_FUN_IE_V 0x1
#define RTC_IO_TOUCH_PAD1_FUN_IE_S 13
/* RTC_IO_TOUCH_PAD1_TO_GPIO : R/W ;bitpos:[12] ;default: 1'd0 ; */
/*description: connect the rtc pad input to digital pad input Ó0Ó is availbale.GPIO0*/
#define RTC_IO_TOUCH_PAD1_TO_GPIO (BIT(12))
#define RTC_IO_TOUCH_PAD1_TO_GPIO_M (BIT(12))
#define RTC_IO_TOUCH_PAD1_TO_GPIO_V 0x1
#define RTC_IO_TOUCH_PAD1_TO_GPIO_S 12
#define RTC_IO_TOUCH_PAD2_REG (DR_REG_RTCIO_BASE + 0x9c)
/* RTC_IO_TOUCH_PAD2_HOLD : R/W ;bitpos:[31] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_TOUCH_PAD2_HOLD (BIT(31))
#define RTC_IO_TOUCH_PAD2_HOLD_M (BIT(31))
#define RTC_IO_TOUCH_PAD2_HOLD_V 0x1
#define RTC_IO_TOUCH_PAD2_HOLD_S 31
/* RTC_IO_TOUCH_PAD2_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
/*description: the driver strength of the pad*/
#define RTC_IO_TOUCH_PAD2_DRV 0x00000003
#define RTC_IO_TOUCH_PAD2_DRV_M ((RTC_IO_TOUCH_PAD2_DRV_V)<<(RTC_IO_TOUCH_PAD2_DRV_S))
#define RTC_IO_TOUCH_PAD2_DRV_V 0x3
#define RTC_IO_TOUCH_PAD2_DRV_S 29
/* RTC_IO_TOUCH_PAD2_RDE : R/W ;bitpos:[28] ;default: 1'd1 ; */
/*description: the pull down enable of the pad*/
#define RTC_IO_TOUCH_PAD2_RDE (BIT(28))
#define RTC_IO_TOUCH_PAD2_RDE_M (BIT(28))
#define RTC_IO_TOUCH_PAD2_RDE_V 0x1
#define RTC_IO_TOUCH_PAD2_RDE_S 28
/* RTC_IO_TOUCH_PAD2_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
/*description: the pull up enable of the pad*/
#define RTC_IO_TOUCH_PAD2_RUE (BIT(27))
#define RTC_IO_TOUCH_PAD2_RUE_M (BIT(27))
#define RTC_IO_TOUCH_PAD2_RUE_V 0x1
#define RTC_IO_TOUCH_PAD2_RUE_S 27
/* RTC_IO_TOUCH_PAD2_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
/*description: touch sensor slope control. 3-bit for each touch panel default 100.*/
#define RTC_IO_TOUCH_PAD2_DAC 0x00000007
#define RTC_IO_TOUCH_PAD2_DAC_M ((RTC_IO_TOUCH_PAD2_DAC_V)<<(RTC_IO_TOUCH_PAD2_DAC_S))
#define RTC_IO_TOUCH_PAD2_DAC_V 0x7
#define RTC_IO_TOUCH_PAD2_DAC_S 23
/* RTC_IO_TOUCH_PAD2_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
/*description: start touch sensor.*/
#define RTC_IO_TOUCH_PAD2_START (BIT(22))
#define RTC_IO_TOUCH_PAD2_START_M (BIT(22))
#define RTC_IO_TOUCH_PAD2_START_V 0x1
#define RTC_IO_TOUCH_PAD2_START_S 22
/* RTC_IO_TOUCH_PAD2_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
/*description: default touch sensor tie option. 0: tie low 1: tie high.*/
#define RTC_IO_TOUCH_PAD2_TIE_OPT (BIT(21))
#define RTC_IO_TOUCH_PAD2_TIE_OPT_M (BIT(21))
#define RTC_IO_TOUCH_PAD2_TIE_OPT_V 0x1
#define RTC_IO_TOUCH_PAD2_TIE_OPT_S 21
/* RTC_IO_TOUCH_PAD2_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
/*description: touch sensor power on.*/
#define RTC_IO_TOUCH_PAD2_XPD (BIT(20))
#define RTC_IO_TOUCH_PAD2_XPD_M (BIT(20))
#define RTC_IO_TOUCH_PAD2_XPD_V 0x1
#define RTC_IO_TOUCH_PAD2_XPD_S 20
/* RTC_IO_TOUCH_PAD2_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_TOUCH_PAD2_MUX_SEL (BIT(19))
#define RTC_IO_TOUCH_PAD2_MUX_SEL_M (BIT(19))
#define RTC_IO_TOUCH_PAD2_MUX_SEL_V 0x1
#define RTC_IO_TOUCH_PAD2_MUX_SEL_S 19
/* RTC_IO_TOUCH_PAD2_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_TOUCH_PAD2_FUN_SEL 0x00000003
#define RTC_IO_TOUCH_PAD2_FUN_SEL_M ((RTC_IO_TOUCH_PAD2_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD2_FUN_SEL_S))
#define RTC_IO_TOUCH_PAD2_FUN_SEL_V 0x3
#define RTC_IO_TOUCH_PAD2_FUN_SEL_S 17
/* RTC_IO_TOUCH_PAD2_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_TOUCH_PAD2_SLP_SEL (BIT(16))
#define RTC_IO_TOUCH_PAD2_SLP_SEL_M (BIT(16))
#define RTC_IO_TOUCH_PAD2_SLP_SEL_V 0x1
#define RTC_IO_TOUCH_PAD2_SLP_SEL_S 16
/* RTC_IO_TOUCH_PAD2_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD2_SLP_IE (BIT(15))
#define RTC_IO_TOUCH_PAD2_SLP_IE_M (BIT(15))
#define RTC_IO_TOUCH_PAD2_SLP_IE_V 0x1
#define RTC_IO_TOUCH_PAD2_SLP_IE_S 15
/* RTC_IO_TOUCH_PAD2_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
/*description: the output enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD2_SLP_OE (BIT(14))
#define RTC_IO_TOUCH_PAD2_SLP_OE_M (BIT(14))
#define RTC_IO_TOUCH_PAD2_SLP_OE_V 0x1
#define RTC_IO_TOUCH_PAD2_SLP_OE_S 14
/* RTC_IO_TOUCH_PAD2_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_TOUCH_PAD2_FUN_IE (BIT(13))
#define RTC_IO_TOUCH_PAD2_FUN_IE_M (BIT(13))
#define RTC_IO_TOUCH_PAD2_FUN_IE_V 0x1
#define RTC_IO_TOUCH_PAD2_FUN_IE_S 13
/* RTC_IO_TOUCH_PAD2_TO_GPIO : R/W ;bitpos:[12] ;default: 1'd0 ; */
/*description: connect the rtc pad input to digital pad input Ó0Ó is availbale.GPIO2*/
#define RTC_IO_TOUCH_PAD2_TO_GPIO (BIT(12))
#define RTC_IO_TOUCH_PAD2_TO_GPIO_M (BIT(12))
#define RTC_IO_TOUCH_PAD2_TO_GPIO_V 0x1
#define RTC_IO_TOUCH_PAD2_TO_GPIO_S 12
#define RTC_IO_TOUCH_PAD3_REG (DR_REG_RTCIO_BASE + 0xa0)
/* RTC_IO_TOUCH_PAD3_HOLD : R/W ;bitpos:[31] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_TOUCH_PAD3_HOLD (BIT(31))
#define RTC_IO_TOUCH_PAD3_HOLD_M (BIT(31))
#define RTC_IO_TOUCH_PAD3_HOLD_V 0x1
#define RTC_IO_TOUCH_PAD3_HOLD_S 31
/* RTC_IO_TOUCH_PAD3_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
/*description: the driver strength of the pad*/
#define RTC_IO_TOUCH_PAD3_DRV 0x00000003
#define RTC_IO_TOUCH_PAD3_DRV_M ((RTC_IO_TOUCH_PAD3_DRV_V)<<(RTC_IO_TOUCH_PAD3_DRV_S))
#define RTC_IO_TOUCH_PAD3_DRV_V 0x3
#define RTC_IO_TOUCH_PAD3_DRV_S 29
/* RTC_IO_TOUCH_PAD3_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
/*description: the pull down enable of the pad*/
#define RTC_IO_TOUCH_PAD3_RDE (BIT(28))
#define RTC_IO_TOUCH_PAD3_RDE_M (BIT(28))
#define RTC_IO_TOUCH_PAD3_RDE_V 0x1
#define RTC_IO_TOUCH_PAD3_RDE_S 28
/* RTC_IO_TOUCH_PAD3_RUE : R/W ;bitpos:[27] ;default: 1'd1 ; */
/*description: the pull up enable of the pad*/
#define RTC_IO_TOUCH_PAD3_RUE (BIT(27))
#define RTC_IO_TOUCH_PAD3_RUE_M (BIT(27))
#define RTC_IO_TOUCH_PAD3_RUE_V 0x1
#define RTC_IO_TOUCH_PAD3_RUE_S 27
/* RTC_IO_TOUCH_PAD3_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
/*description: touch sensor slope control. 3-bit for each touch panel default 100.*/
#define RTC_IO_TOUCH_PAD3_DAC 0x00000007
#define RTC_IO_TOUCH_PAD3_DAC_M ((RTC_IO_TOUCH_PAD3_DAC_V)<<(RTC_IO_TOUCH_PAD3_DAC_S))
#define RTC_IO_TOUCH_PAD3_DAC_V 0x7
#define RTC_IO_TOUCH_PAD3_DAC_S 23
/* RTC_IO_TOUCH_PAD3_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
/*description: start touch sensor.*/
#define RTC_IO_TOUCH_PAD3_START (BIT(22))
#define RTC_IO_TOUCH_PAD3_START_M (BIT(22))
#define RTC_IO_TOUCH_PAD3_START_V 0x1
#define RTC_IO_TOUCH_PAD3_START_S 22
/* RTC_IO_TOUCH_PAD3_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
/*description: default touch sensor tie option. 0: tie low 1: tie high.*/
#define RTC_IO_TOUCH_PAD3_TIE_OPT (BIT(21))
#define RTC_IO_TOUCH_PAD3_TIE_OPT_M (BIT(21))
#define RTC_IO_TOUCH_PAD3_TIE_OPT_V 0x1
#define RTC_IO_TOUCH_PAD3_TIE_OPT_S 21
/* RTC_IO_TOUCH_PAD3_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
/*description: touch sensor power on.*/
#define RTC_IO_TOUCH_PAD3_XPD (BIT(20))
#define RTC_IO_TOUCH_PAD3_XPD_M (BIT(20))
#define RTC_IO_TOUCH_PAD3_XPD_V 0x1
#define RTC_IO_TOUCH_PAD3_XPD_S 20
/* RTC_IO_TOUCH_PAD3_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_TOUCH_PAD3_MUX_SEL (BIT(19))
#define RTC_IO_TOUCH_PAD3_MUX_SEL_M (BIT(19))
#define RTC_IO_TOUCH_PAD3_MUX_SEL_V 0x1
#define RTC_IO_TOUCH_PAD3_MUX_SEL_S 19
/* RTC_IO_TOUCH_PAD3_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_TOUCH_PAD3_FUN_SEL 0x00000003
#define RTC_IO_TOUCH_PAD3_FUN_SEL_M ((RTC_IO_TOUCH_PAD3_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD3_FUN_SEL_S))
#define RTC_IO_TOUCH_PAD3_FUN_SEL_V 0x3
#define RTC_IO_TOUCH_PAD3_FUN_SEL_S 17
/* RTC_IO_TOUCH_PAD3_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_TOUCH_PAD3_SLP_SEL (BIT(16))
#define RTC_IO_TOUCH_PAD3_SLP_SEL_M (BIT(16))
#define RTC_IO_TOUCH_PAD3_SLP_SEL_V 0x1
#define RTC_IO_TOUCH_PAD3_SLP_SEL_S 16
/* RTC_IO_TOUCH_PAD3_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD3_SLP_IE (BIT(15))
#define RTC_IO_TOUCH_PAD3_SLP_IE_M (BIT(15))
#define RTC_IO_TOUCH_PAD3_SLP_IE_V 0x1
#define RTC_IO_TOUCH_PAD3_SLP_IE_S 15
/* RTC_IO_TOUCH_PAD3_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
/*description: the output enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD3_SLP_OE (BIT(14))
#define RTC_IO_TOUCH_PAD3_SLP_OE_M (BIT(14))
#define RTC_IO_TOUCH_PAD3_SLP_OE_V 0x1
#define RTC_IO_TOUCH_PAD3_SLP_OE_S 14
/* RTC_IO_TOUCH_PAD3_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_TOUCH_PAD3_FUN_IE (BIT(13))
#define RTC_IO_TOUCH_PAD3_FUN_IE_M (BIT(13))
#define RTC_IO_TOUCH_PAD3_FUN_IE_V 0x1
#define RTC_IO_TOUCH_PAD3_FUN_IE_S 13
/* RTC_IO_TOUCH_PAD3_TO_GPIO : R/W ;bitpos:[12] ;default: 1'd0 ; */
/*description: connect the rtc pad input to digital pad input Ó0Ó is availbale.MTDO*/
#define RTC_IO_TOUCH_PAD3_TO_GPIO (BIT(12))
#define RTC_IO_TOUCH_PAD3_TO_GPIO_M (BIT(12))
#define RTC_IO_TOUCH_PAD3_TO_GPIO_V 0x1
#define RTC_IO_TOUCH_PAD3_TO_GPIO_S 12
#define RTC_IO_TOUCH_PAD4_REG (DR_REG_RTCIO_BASE + 0xa4)
/* RTC_IO_TOUCH_PAD4_HOLD : R/W ;bitpos:[31] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_TOUCH_PAD4_HOLD (BIT(31))
#define RTC_IO_TOUCH_PAD4_HOLD_M (BIT(31))
#define RTC_IO_TOUCH_PAD4_HOLD_V 0x1
#define RTC_IO_TOUCH_PAD4_HOLD_S 31
/* RTC_IO_TOUCH_PAD4_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
/*description: the driver strength of the pad*/
#define RTC_IO_TOUCH_PAD4_DRV 0x00000003
#define RTC_IO_TOUCH_PAD4_DRV_M ((RTC_IO_TOUCH_PAD4_DRV_V)<<(RTC_IO_TOUCH_PAD4_DRV_S))
#define RTC_IO_TOUCH_PAD4_DRV_V 0x3
#define RTC_IO_TOUCH_PAD4_DRV_S 29
/* RTC_IO_TOUCH_PAD4_RDE : R/W ;bitpos:[28] ;default: 1'd1 ; */
/*description: the pull down enable of the pad*/
#define RTC_IO_TOUCH_PAD4_RDE (BIT(28))
#define RTC_IO_TOUCH_PAD4_RDE_M (BIT(28))
#define RTC_IO_TOUCH_PAD4_RDE_V 0x1
#define RTC_IO_TOUCH_PAD4_RDE_S 28
/* RTC_IO_TOUCH_PAD4_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
/*description: the pull up enable of the pad*/
#define RTC_IO_TOUCH_PAD4_RUE (BIT(27))
#define RTC_IO_TOUCH_PAD4_RUE_M (BIT(27))
#define RTC_IO_TOUCH_PAD4_RUE_V 0x1
#define RTC_IO_TOUCH_PAD4_RUE_S 27
/* RTC_IO_TOUCH_PAD4_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
/*description: touch sensor slope control. 3-bit for each touch panel default 100.*/
#define RTC_IO_TOUCH_PAD4_DAC 0x00000007
#define RTC_IO_TOUCH_PAD4_DAC_M ((RTC_IO_TOUCH_PAD4_DAC_V)<<(RTC_IO_TOUCH_PAD4_DAC_S))
#define RTC_IO_TOUCH_PAD4_DAC_V 0x7
#define RTC_IO_TOUCH_PAD4_DAC_S 23
/* RTC_IO_TOUCH_PAD4_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
/*description: start touch sensor.*/
#define RTC_IO_TOUCH_PAD4_START (BIT(22))
#define RTC_IO_TOUCH_PAD4_START_M (BIT(22))
#define RTC_IO_TOUCH_PAD4_START_V 0x1
#define RTC_IO_TOUCH_PAD4_START_S 22
/* RTC_IO_TOUCH_PAD4_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
/*description: default touch sensor tie option. 0: tie low 1: tie high.*/
#define RTC_IO_TOUCH_PAD4_TIE_OPT (BIT(21))
#define RTC_IO_TOUCH_PAD4_TIE_OPT_M (BIT(21))
#define RTC_IO_TOUCH_PAD4_TIE_OPT_V 0x1
#define RTC_IO_TOUCH_PAD4_TIE_OPT_S 21
/* RTC_IO_TOUCH_PAD4_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
/*description: touch sensor power on.*/
#define RTC_IO_TOUCH_PAD4_XPD (BIT(20))
#define RTC_IO_TOUCH_PAD4_XPD_M (BIT(20))
#define RTC_IO_TOUCH_PAD4_XPD_V 0x1
#define RTC_IO_TOUCH_PAD4_XPD_S 20
/* RTC_IO_TOUCH_PAD4_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_TOUCH_PAD4_MUX_SEL (BIT(19))
#define RTC_IO_TOUCH_PAD4_MUX_SEL_M (BIT(19))
#define RTC_IO_TOUCH_PAD4_MUX_SEL_V 0x1
#define RTC_IO_TOUCH_PAD4_MUX_SEL_S 19
/* RTC_IO_TOUCH_PAD4_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_TOUCH_PAD4_FUN_SEL 0x00000003
#define RTC_IO_TOUCH_PAD4_FUN_SEL_M ((RTC_IO_TOUCH_PAD4_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD4_FUN_SEL_S))
#define RTC_IO_TOUCH_PAD4_FUN_SEL_V 0x3
#define RTC_IO_TOUCH_PAD4_FUN_SEL_S 17
/* RTC_IO_TOUCH_PAD4_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_TOUCH_PAD4_SLP_SEL (BIT(16))
#define RTC_IO_TOUCH_PAD4_SLP_SEL_M (BIT(16))
#define RTC_IO_TOUCH_PAD4_SLP_SEL_V 0x1
#define RTC_IO_TOUCH_PAD4_SLP_SEL_S 16
/* RTC_IO_TOUCH_PAD4_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD4_SLP_IE (BIT(15))
#define RTC_IO_TOUCH_PAD4_SLP_IE_M (BIT(15))
#define RTC_IO_TOUCH_PAD4_SLP_IE_V 0x1
#define RTC_IO_TOUCH_PAD4_SLP_IE_S 15
/* RTC_IO_TOUCH_PAD4_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
/*description: the output enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD4_SLP_OE (BIT(14))
#define RTC_IO_TOUCH_PAD4_SLP_OE_M (BIT(14))
#define RTC_IO_TOUCH_PAD4_SLP_OE_V 0x1
#define RTC_IO_TOUCH_PAD4_SLP_OE_S 14
/* RTC_IO_TOUCH_PAD4_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_TOUCH_PAD4_FUN_IE (BIT(13))
#define RTC_IO_TOUCH_PAD4_FUN_IE_M (BIT(13))
#define RTC_IO_TOUCH_PAD4_FUN_IE_V 0x1
#define RTC_IO_TOUCH_PAD4_FUN_IE_S 13
/* RTC_IO_TOUCH_PAD4_TO_GPIO : R/W ;bitpos:[12] ;default: 1'd0 ; */
/*description: connect the rtc pad input to digital pad input Ó0Ó is availbale.MTCK*/
#define RTC_IO_TOUCH_PAD4_TO_GPIO (BIT(12))
#define RTC_IO_TOUCH_PAD4_TO_GPIO_M (BIT(12))
#define RTC_IO_TOUCH_PAD4_TO_GPIO_V 0x1
#define RTC_IO_TOUCH_PAD4_TO_GPIO_S 12
#define RTC_IO_TOUCH_PAD5_REG (DR_REG_RTCIO_BASE + 0xa8)
/* RTC_IO_TOUCH_PAD5_HOLD : R/W ;bitpos:[31] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_TOUCH_PAD5_HOLD (BIT(31))
#define RTC_IO_TOUCH_PAD5_HOLD_M (BIT(31))
#define RTC_IO_TOUCH_PAD5_HOLD_V 0x1
#define RTC_IO_TOUCH_PAD5_HOLD_S 31
/* RTC_IO_TOUCH_PAD5_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
/*description: the driver strength of the pad*/
#define RTC_IO_TOUCH_PAD5_DRV 0x00000003
#define RTC_IO_TOUCH_PAD5_DRV_M ((RTC_IO_TOUCH_PAD5_DRV_V)<<(RTC_IO_TOUCH_PAD5_DRV_S))
#define RTC_IO_TOUCH_PAD5_DRV_V 0x3
#define RTC_IO_TOUCH_PAD5_DRV_S 29
/* RTC_IO_TOUCH_PAD5_RDE : R/W ;bitpos:[28] ;default: 1'd1 ; */
/*description: the pull down enable of the pad*/
#define RTC_IO_TOUCH_PAD5_RDE (BIT(28))
#define RTC_IO_TOUCH_PAD5_RDE_M (BIT(28))
#define RTC_IO_TOUCH_PAD5_RDE_V 0x1
#define RTC_IO_TOUCH_PAD5_RDE_S 28
/* RTC_IO_TOUCH_PAD5_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
/*description: the pull up enable of the pad*/
#define RTC_IO_TOUCH_PAD5_RUE (BIT(27))
#define RTC_IO_TOUCH_PAD5_RUE_M (BIT(27))
#define RTC_IO_TOUCH_PAD5_RUE_V 0x1
#define RTC_IO_TOUCH_PAD5_RUE_S 27
/* RTC_IO_TOUCH_PAD5_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
/*description: touch sensor slope control. 3-bit for each touch panel default 100.*/
#define RTC_IO_TOUCH_PAD5_DAC 0x00000007
#define RTC_IO_TOUCH_PAD5_DAC_M ((RTC_IO_TOUCH_PAD5_DAC_V)<<(RTC_IO_TOUCH_PAD5_DAC_S))
#define RTC_IO_TOUCH_PAD5_DAC_V 0x7
#define RTC_IO_TOUCH_PAD5_DAC_S 23
/* RTC_IO_TOUCH_PAD5_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
/*description: start touch sensor.*/
#define RTC_IO_TOUCH_PAD5_START (BIT(22))
#define RTC_IO_TOUCH_PAD5_START_M (BIT(22))
#define RTC_IO_TOUCH_PAD5_START_V 0x1
#define RTC_IO_TOUCH_PAD5_START_S 22
/* RTC_IO_TOUCH_PAD5_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
/*description: default touch sensor tie option. 0: tie low 1: tie high.*/
#define RTC_IO_TOUCH_PAD5_TIE_OPT (BIT(21))
#define RTC_IO_TOUCH_PAD5_TIE_OPT_M (BIT(21))
#define RTC_IO_TOUCH_PAD5_TIE_OPT_V 0x1
#define RTC_IO_TOUCH_PAD5_TIE_OPT_S 21
/* RTC_IO_TOUCH_PAD5_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
/*description: touch sensor power on.*/
#define RTC_IO_TOUCH_PAD5_XPD (BIT(20))
#define RTC_IO_TOUCH_PAD5_XPD_M (BIT(20))
#define RTC_IO_TOUCH_PAD5_XPD_V 0x1
#define RTC_IO_TOUCH_PAD5_XPD_S 20
/* RTC_IO_TOUCH_PAD5_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_TOUCH_PAD5_MUX_SEL (BIT(19))
#define RTC_IO_TOUCH_PAD5_MUX_SEL_M (BIT(19))
#define RTC_IO_TOUCH_PAD5_MUX_SEL_V 0x1
#define RTC_IO_TOUCH_PAD5_MUX_SEL_S 19
/* RTC_IO_TOUCH_PAD5_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_TOUCH_PAD5_FUN_SEL 0x00000003
#define RTC_IO_TOUCH_PAD5_FUN_SEL_M ((RTC_IO_TOUCH_PAD5_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD5_FUN_SEL_S))
#define RTC_IO_TOUCH_PAD5_FUN_SEL_V 0x3
#define RTC_IO_TOUCH_PAD5_FUN_SEL_S 17
/* RTC_IO_TOUCH_PAD5_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_TOUCH_PAD5_SLP_SEL (BIT(16))
#define RTC_IO_TOUCH_PAD5_SLP_SEL_M (BIT(16))
#define RTC_IO_TOUCH_PAD5_SLP_SEL_V 0x1
#define RTC_IO_TOUCH_PAD5_SLP_SEL_S 16
/* RTC_IO_TOUCH_PAD5_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD5_SLP_IE (BIT(15))
#define RTC_IO_TOUCH_PAD5_SLP_IE_M (BIT(15))
#define RTC_IO_TOUCH_PAD5_SLP_IE_V 0x1
#define RTC_IO_TOUCH_PAD5_SLP_IE_S 15
/* RTC_IO_TOUCH_PAD5_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
/*description: the output enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD5_SLP_OE (BIT(14))
#define RTC_IO_TOUCH_PAD5_SLP_OE_M (BIT(14))
#define RTC_IO_TOUCH_PAD5_SLP_OE_V 0x1
#define RTC_IO_TOUCH_PAD5_SLP_OE_S 14
/* RTC_IO_TOUCH_PAD5_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_TOUCH_PAD5_FUN_IE (BIT(13))
#define RTC_IO_TOUCH_PAD5_FUN_IE_M (BIT(13))
#define RTC_IO_TOUCH_PAD5_FUN_IE_V 0x1
#define RTC_IO_TOUCH_PAD5_FUN_IE_S 13
/* RTC_IO_TOUCH_PAD5_TO_GPIO : R/W ;bitpos:[12] ;default: 1'd0 ; */
/*description: connect the rtc pad input to digital pad input Ó0Ó is availbale.MTDI*/
#define RTC_IO_TOUCH_PAD5_TO_GPIO (BIT(12))
#define RTC_IO_TOUCH_PAD5_TO_GPIO_M (BIT(12))
#define RTC_IO_TOUCH_PAD5_TO_GPIO_V 0x1
#define RTC_IO_TOUCH_PAD5_TO_GPIO_S 12
#define RTC_IO_TOUCH_PAD6_REG (DR_REG_RTCIO_BASE + 0xac)
/* RTC_IO_TOUCH_PAD6_HOLD : R/W ;bitpos:[31] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_TOUCH_PAD6_HOLD (BIT(31))
#define RTC_IO_TOUCH_PAD6_HOLD_M (BIT(31))
#define RTC_IO_TOUCH_PAD6_HOLD_V 0x1
#define RTC_IO_TOUCH_PAD6_HOLD_S 31
/* RTC_IO_TOUCH_PAD6_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
/*description: the driver strength of the pad*/
#define RTC_IO_TOUCH_PAD6_DRV 0x00000003
#define RTC_IO_TOUCH_PAD6_DRV_M ((RTC_IO_TOUCH_PAD6_DRV_V)<<(RTC_IO_TOUCH_PAD6_DRV_S))
#define RTC_IO_TOUCH_PAD6_DRV_V 0x3
#define RTC_IO_TOUCH_PAD6_DRV_S 29
/* RTC_IO_TOUCH_PAD6_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
/*description: the pull down enable of the pad*/
#define RTC_IO_TOUCH_PAD6_RDE (BIT(28))
#define RTC_IO_TOUCH_PAD6_RDE_M (BIT(28))
#define RTC_IO_TOUCH_PAD6_RDE_V 0x1
#define RTC_IO_TOUCH_PAD6_RDE_S 28
/* RTC_IO_TOUCH_PAD6_RUE : R/W ;bitpos:[27] ;default: 1'd1 ; */
/*description: the pull up enable of the pad*/
#define RTC_IO_TOUCH_PAD6_RUE (BIT(27))
#define RTC_IO_TOUCH_PAD6_RUE_M (BIT(27))
#define RTC_IO_TOUCH_PAD6_RUE_V 0x1
#define RTC_IO_TOUCH_PAD6_RUE_S 27
/* RTC_IO_TOUCH_PAD6_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
/*description: touch sensor slope control. 3-bit for each touch panel default 100.*/
#define RTC_IO_TOUCH_PAD6_DAC 0x00000007
#define RTC_IO_TOUCH_PAD6_DAC_M ((RTC_IO_TOUCH_PAD6_DAC_V)<<(RTC_IO_TOUCH_PAD6_DAC_S))
#define RTC_IO_TOUCH_PAD6_DAC_V 0x7
#define RTC_IO_TOUCH_PAD6_DAC_S 23
/* RTC_IO_TOUCH_PAD6_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
/*description: start touch sensor.*/
#define RTC_IO_TOUCH_PAD6_START (BIT(22))
#define RTC_IO_TOUCH_PAD6_START_M (BIT(22))
#define RTC_IO_TOUCH_PAD6_START_V 0x1
#define RTC_IO_TOUCH_PAD6_START_S 22
/* RTC_IO_TOUCH_PAD6_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
/*description: default touch sensor tie option. 0: tie low 1: tie high.*/
#define RTC_IO_TOUCH_PAD6_TIE_OPT (BIT(21))
#define RTC_IO_TOUCH_PAD6_TIE_OPT_M (BIT(21))
#define RTC_IO_TOUCH_PAD6_TIE_OPT_V 0x1
#define RTC_IO_TOUCH_PAD6_TIE_OPT_S 21
/* RTC_IO_TOUCH_PAD6_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
/*description: touch sensor power on.*/
#define RTC_IO_TOUCH_PAD6_XPD (BIT(20))
#define RTC_IO_TOUCH_PAD6_XPD_M (BIT(20))
#define RTC_IO_TOUCH_PAD6_XPD_V 0x1
#define RTC_IO_TOUCH_PAD6_XPD_S 20
/* RTC_IO_TOUCH_PAD6_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_TOUCH_PAD6_MUX_SEL (BIT(19))
#define RTC_IO_TOUCH_PAD6_MUX_SEL_M (BIT(19))
#define RTC_IO_TOUCH_PAD6_MUX_SEL_V 0x1
#define RTC_IO_TOUCH_PAD6_MUX_SEL_S 19
/* RTC_IO_TOUCH_PAD6_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_TOUCH_PAD6_FUN_SEL 0x00000003
#define RTC_IO_TOUCH_PAD6_FUN_SEL_M ((RTC_IO_TOUCH_PAD6_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD6_FUN_SEL_S))
#define RTC_IO_TOUCH_PAD6_FUN_SEL_V 0x3
#define RTC_IO_TOUCH_PAD6_FUN_SEL_S 17
/* RTC_IO_TOUCH_PAD6_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_TOUCH_PAD6_SLP_SEL (BIT(16))
#define RTC_IO_TOUCH_PAD6_SLP_SEL_M (BIT(16))
#define RTC_IO_TOUCH_PAD6_SLP_SEL_V 0x1
#define RTC_IO_TOUCH_PAD6_SLP_SEL_S 16
/* RTC_IO_TOUCH_PAD6_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD6_SLP_IE (BIT(15))
#define RTC_IO_TOUCH_PAD6_SLP_IE_M (BIT(15))
#define RTC_IO_TOUCH_PAD6_SLP_IE_V 0x1
#define RTC_IO_TOUCH_PAD6_SLP_IE_S 15
/* RTC_IO_TOUCH_PAD6_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
/*description: the output enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD6_SLP_OE (BIT(14))
#define RTC_IO_TOUCH_PAD6_SLP_OE_M (BIT(14))
#define RTC_IO_TOUCH_PAD6_SLP_OE_V 0x1
#define RTC_IO_TOUCH_PAD6_SLP_OE_S 14
/* RTC_IO_TOUCH_PAD6_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_TOUCH_PAD6_FUN_IE (BIT(13))
#define RTC_IO_TOUCH_PAD6_FUN_IE_M (BIT(13))
#define RTC_IO_TOUCH_PAD6_FUN_IE_V 0x1
#define RTC_IO_TOUCH_PAD6_FUN_IE_S 13
/* RTC_IO_TOUCH_PAD6_TO_GPIO : R/W ;bitpos:[12] ;default: 1'd0 ; */
/*description: connect the rtc pad input to digital pad input Ó0Ó is availbale.MTMS*/
#define RTC_IO_TOUCH_PAD6_TO_GPIO (BIT(12))
#define RTC_IO_TOUCH_PAD6_TO_GPIO_M (BIT(12))
#define RTC_IO_TOUCH_PAD6_TO_GPIO_V 0x1
#define RTC_IO_TOUCH_PAD6_TO_GPIO_S 12
#define RTC_IO_TOUCH_PAD7_REG (DR_REG_RTCIO_BASE + 0xb0)
/* RTC_IO_TOUCH_PAD7_HOLD : R/W ;bitpos:[31] ;default: 1'd0 ; */
/*description: hold the current value of the output when setting the hold to Ò1Ó*/
#define RTC_IO_TOUCH_PAD7_HOLD (BIT(31))
#define RTC_IO_TOUCH_PAD7_HOLD_M (BIT(31))
#define RTC_IO_TOUCH_PAD7_HOLD_V 0x1
#define RTC_IO_TOUCH_PAD7_HOLD_S 31
/* RTC_IO_TOUCH_PAD7_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
/*description: the driver strength of the pad*/
#define RTC_IO_TOUCH_PAD7_DRV 0x00000003
#define RTC_IO_TOUCH_PAD7_DRV_M ((RTC_IO_TOUCH_PAD7_DRV_V)<<(RTC_IO_TOUCH_PAD7_DRV_S))
#define RTC_IO_TOUCH_PAD7_DRV_V 0x3
#define RTC_IO_TOUCH_PAD7_DRV_S 29
/* RTC_IO_TOUCH_PAD7_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
/*description: the pull down enable of the pad*/
#define RTC_IO_TOUCH_PAD7_RDE (BIT(28))
#define RTC_IO_TOUCH_PAD7_RDE_M (BIT(28))
#define RTC_IO_TOUCH_PAD7_RDE_V 0x1
#define RTC_IO_TOUCH_PAD7_RDE_S 28
/* RTC_IO_TOUCH_PAD7_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
/*description: the pull up enable of the pad*/
#define RTC_IO_TOUCH_PAD7_RUE (BIT(27))
#define RTC_IO_TOUCH_PAD7_RUE_M (BIT(27))
#define RTC_IO_TOUCH_PAD7_RUE_V 0x1
#define RTC_IO_TOUCH_PAD7_RUE_S 27
/* RTC_IO_TOUCH_PAD7_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
/*description: touch sensor slope control. 3-bit for each touch panel default 100.*/
#define RTC_IO_TOUCH_PAD7_DAC 0x00000007
#define RTC_IO_TOUCH_PAD7_DAC_M ((RTC_IO_TOUCH_PAD7_DAC_V)<<(RTC_IO_TOUCH_PAD7_DAC_S))
#define RTC_IO_TOUCH_PAD7_DAC_V 0x7
#define RTC_IO_TOUCH_PAD7_DAC_S 23
/* RTC_IO_TOUCH_PAD7_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
/*description: start touch sensor.*/
#define RTC_IO_TOUCH_PAD7_START (BIT(22))
#define RTC_IO_TOUCH_PAD7_START_M (BIT(22))
#define RTC_IO_TOUCH_PAD7_START_V 0x1
#define RTC_IO_TOUCH_PAD7_START_S 22
/* RTC_IO_TOUCH_PAD7_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
/*description: default touch sensor tie option. 0: tie low 1: tie high.*/
#define RTC_IO_TOUCH_PAD7_TIE_OPT (BIT(21))
#define RTC_IO_TOUCH_PAD7_TIE_OPT_M (BIT(21))
#define RTC_IO_TOUCH_PAD7_TIE_OPT_V 0x1
#define RTC_IO_TOUCH_PAD7_TIE_OPT_S 21
/* RTC_IO_TOUCH_PAD7_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
/*description: touch sensor power on.*/
#define RTC_IO_TOUCH_PAD7_XPD (BIT(20))
#define RTC_IO_TOUCH_PAD7_XPD_M (BIT(20))
#define RTC_IO_TOUCH_PAD7_XPD_V 0x1
#define RTC_IO_TOUCH_PAD7_XPD_S 20
/* RTC_IO_TOUCH_PAD7_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
/*description: Ò1Ó select the digital function Ó0Óslection the rtc function*/
#define RTC_IO_TOUCH_PAD7_MUX_SEL (BIT(19))
#define RTC_IO_TOUCH_PAD7_MUX_SEL_M (BIT(19))
#define RTC_IO_TOUCH_PAD7_MUX_SEL_V 0x1
#define RTC_IO_TOUCH_PAD7_MUX_SEL_S 19
/* RTC_IO_TOUCH_PAD7_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
/*description: the functional selection signal of the pad*/
#define RTC_IO_TOUCH_PAD7_FUN_SEL 0x00000003
#define RTC_IO_TOUCH_PAD7_FUN_SEL_M ((RTC_IO_TOUCH_PAD7_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD7_FUN_SEL_S))
#define RTC_IO_TOUCH_PAD7_FUN_SEL_V 0x3
#define RTC_IO_TOUCH_PAD7_FUN_SEL_S 17
/* RTC_IO_TOUCH_PAD7_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
/*description: the sleep status selection signal of the pad*/
#define RTC_IO_TOUCH_PAD7_SLP_SEL (BIT(16))
#define RTC_IO_TOUCH_PAD7_SLP_SEL_M (BIT(16))
#define RTC_IO_TOUCH_PAD7_SLP_SEL_V 0x1
#define RTC_IO_TOUCH_PAD7_SLP_SEL_S 16
/* RTC_IO_TOUCH_PAD7_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
/*description: the input enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD7_SLP_IE (BIT(15))
#define RTC_IO_TOUCH_PAD7_SLP_IE_M (BIT(15))
#define RTC_IO_TOUCH_PAD7_SLP_IE_V 0x1
#define RTC_IO_TOUCH_PAD7_SLP_IE_S 15
/* RTC_IO_TOUCH_PAD7_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
/*description: the output enable of the pad in sleep status*/
#define RTC_IO_TOUCH_PAD7_SLP_OE (BIT(14))
#define RTC_IO_TOUCH_PAD7_SLP_OE_M (BIT(14))
#define RTC_IO_TOUCH_PAD7_SLP_OE_V 0x1
#define RTC_IO_TOUCH_PAD7_SLP_OE_S 14
/* RTC_IO_TOUCH_PAD7_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
/*description: the input enable of the pad*/
#define RTC_IO_TOUCH_PAD7_FUN_IE (BIT(13))
#define RTC_IO_TOUCH_PAD7_FUN_IE_M (BIT(13))
#define RTC_IO_TOUCH_PAD7_FUN_IE_V 0x1
#define RTC_IO_TOUCH_PAD7_FUN_IE_S 13
/* RTC_IO_TOUCH_PAD7_TO_GPIO : R/W ;bitpos:[12] ;default: 1'd0 ; */
/*description: connect the rtc pad input to digital pad input Ó0Ó is availbale.GPIO27*/
#define RTC_IO_TOUCH_PAD7_TO_GPIO (BIT(12))
#define RTC_IO_TOUCH_PAD7_TO_GPIO_M (BIT(12))
#define RTC_IO_TOUCH_PAD7_TO_GPIO_V 0x1
#define RTC_IO_TOUCH_PAD7_TO_GPIO_S 12
#define RTC_IO_TOUCH_PAD8_REG (DR_REG_RTCIO_BASE + 0xb4)
/* RTC_IO_TOUCH_PAD8_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
/*description: touch sensor slope control. 3-bit for each touch panel default 100.*/
#define RTC_IO_TOUCH_PAD8_DAC 0x00000007
#define RTC_IO_TOUCH_PAD8_DAC_M ((RTC_IO_TOUCH_PAD8_DAC_V)<<(RTC_IO_TOUCH_PAD8_DAC_S))
#define RTC_IO_TOUCH_PAD8_DAC_V 0x7
#define RTC_IO_TOUCH_PAD8_DAC_S 23
/* RTC_IO_TOUCH_PAD8_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
/*description: start touch sensor.*/
#define RTC_IO_TOUCH_PAD8_START (BIT(22))
#define RTC_IO_TOUCH_PAD8_START_M (BIT(22))
#define RTC_IO_TOUCH_PAD8_START_V 0x1
#define RTC_IO_TOUCH_PAD8_START_S 22
/* RTC_IO_TOUCH_PAD8_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
/*description: default touch sensor tie option. 0: tie low 1: tie high.*/
#define RTC_IO_TOUCH_PAD8_TIE_OPT (BIT(21))
#define RTC_IO_TOUCH_PAD8_TIE_OPT_M (BIT(21))
#define RTC_IO_TOUCH_PAD8_TIE_OPT_V 0x1
#define RTC_IO_TOUCH_PAD8_TIE_OPT_S 21
/* RTC_IO_TOUCH_PAD8_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
/*description: touch sensor power on.*/
#define RTC_IO_TOUCH_PAD8_XPD (BIT(20))
#define RTC_IO_TOUCH_PAD8_XPD_M (BIT(20))
#define RTC_IO_TOUCH_PAD8_XPD_V 0x1
#define RTC_IO_TOUCH_PAD8_XPD_S 20
/* RTC_IO_TOUCH_PAD8_TO_GPIO : R/W ;bitpos:[19] ;default: 1'd0 ; */
/*description: connect the rtc pad input to digital pad input Ó0Ó is availbale*/
#define RTC_IO_TOUCH_PAD8_TO_GPIO (BIT(19))
#define RTC_IO_TOUCH_PAD8_TO_GPIO_M (BIT(19))
#define RTC_IO_TOUCH_PAD8_TO_GPIO_V 0x1
#define RTC_IO_TOUCH_PAD8_TO_GPIO_S 19
#define RTC_IO_TOUCH_PAD9_REG (DR_REG_RTCIO_BASE + 0xb8)
/* RTC_IO_TOUCH_PAD9_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
/*description: touch sensor slope control. 3-bit for each touch panel default 100.*/
#define RTC_IO_TOUCH_PAD9_DAC 0x00000007
#define RTC_IO_TOUCH_PAD9_DAC_M ((RTC_IO_TOUCH_PAD9_DAC_V)<<(RTC_IO_TOUCH_PAD9_DAC_S))
#define RTC_IO_TOUCH_PAD9_DAC_V 0x7
#define RTC_IO_TOUCH_PAD9_DAC_S 23
/* RTC_IO_TOUCH_PAD9_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
/*description: start touch sensor.*/
#define RTC_IO_TOUCH_PAD9_START (BIT(22))
#define RTC_IO_TOUCH_PAD9_START_M (BIT(22))
#define RTC_IO_TOUCH_PAD9_START_V 0x1
#define RTC_IO_TOUCH_PAD9_START_S 22
/* RTC_IO_TOUCH_PAD9_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
/*description: default touch sensor tie option. 0: tie low 1: tie high.*/
#define RTC_IO_TOUCH_PAD9_TIE_OPT (BIT(21))
#define RTC_IO_TOUCH_PAD9_TIE_OPT_M (BIT(21))
#define RTC_IO_TOUCH_PAD9_TIE_OPT_V 0x1
#define RTC_IO_TOUCH_PAD9_TIE_OPT_S 21
/* RTC_IO_TOUCH_PAD9_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
/*description: touch sensor power on.*/
#define RTC_IO_TOUCH_PAD9_XPD (BIT(20))
#define RTC_IO_TOUCH_PAD9_XPD_M (BIT(20))
#define RTC_IO_TOUCH_PAD9_XPD_V 0x1
#define RTC_IO_TOUCH_PAD9_XPD_S 20
/* RTC_IO_TOUCH_PAD9_TO_GPIO : R/W ;bitpos:[19] ;default: 1'd0 ; */
/*description: connect the rtc pad input to digital pad input Ó0Ó is availbale*/
#define RTC_IO_TOUCH_PAD9_TO_GPIO (BIT(19))
#define RTC_IO_TOUCH_PAD9_TO_GPIO_M (BIT(19))
#define RTC_IO_TOUCH_PAD9_TO_GPIO_V 0x1
#define RTC_IO_TOUCH_PAD9_TO_GPIO_S 19
#define RTC_IO_EXT_WAKEUP0_REG (DR_REG_RTCIO_BASE + 0xbc)
/* RTC_IO_EXT_WAKEUP0_SEL : R/W ;bitpos:[31:27] ;default: 5'd0 ; */
/*description: select the wakeup source Ó0Ó select GPIO0 Ó1Ó select GPIO2 ...Ò17Ó select GPIO17*/
#define RTC_IO_EXT_WAKEUP0_SEL 0x0000001F
#define RTC_IO_EXT_WAKEUP0_SEL_M ((RTC_IO_EXT_WAKEUP0_SEL_V)<<(RTC_IO_EXT_WAKEUP0_SEL_S))
#define RTC_IO_EXT_WAKEUP0_SEL_V 0x1F
#define RTC_IO_EXT_WAKEUP0_SEL_S 27
#define RTC_IO_XTL_EXT_CTR_REG (DR_REG_RTCIO_BASE + 0xc0)
/* RTC_IO_XTL_EXT_CTR_SEL : R/W ;bitpos:[31:27] ;default: 5'd0 ; */
/*description: select the external xtl power source Ó0Ó select GPIO0 Ó1Ó select
GPIO2 ...Ò17Ó select GPIO17*/
#define RTC_IO_XTL_EXT_CTR_SEL 0x0000001F
#define RTC_IO_XTL_EXT_CTR_SEL_M ((RTC_IO_XTL_EXT_CTR_SEL_V)<<(RTC_IO_XTL_EXT_CTR_SEL_S))
#define RTC_IO_XTL_EXT_CTR_SEL_V 0x1F
#define RTC_IO_XTL_EXT_CTR_SEL_S 27
#define RTC_IO_SAR_I2C_IO_REG (DR_REG_RTCIO_BASE + 0xc4)
/* RTC_IO_SAR_I2C_SDA_SEL : R/W ;bitpos:[31:30] ;default: 2'd0 ; */
/*description: Ò0Ó using TOUCH_PAD[1] as i2c sda Ò1Ó using TOUCH_PAD[3] as i2c sda*/
#define RTC_IO_SAR_I2C_SDA_SEL 0x00000003
#define RTC_IO_SAR_I2C_SDA_SEL_M ((RTC_IO_SAR_I2C_SDA_SEL_V)<<(RTC_IO_SAR_I2C_SDA_SEL_S))
#define RTC_IO_SAR_I2C_SDA_SEL_V 0x3
#define RTC_IO_SAR_I2C_SDA_SEL_S 30
/* RTC_IO_SAR_I2C_SCL_SEL : R/W ;bitpos:[29:28] ;default: 2'd0 ; */
/*description: Ò0Ó using TOUCH_PAD[0] as i2c clk Ò1Ó using TOUCH_PAD[2] as i2c clk*/
#define RTC_IO_SAR_I2C_SCL_SEL 0x00000003
#define RTC_IO_SAR_I2C_SCL_SEL_M ((RTC_IO_SAR_I2C_SCL_SEL_V)<<(RTC_IO_SAR_I2C_SCL_SEL_S))
#define RTC_IO_SAR_I2C_SCL_SEL_V 0x3
#define RTC_IO_SAR_I2C_SCL_SEL_S 28
/* RTC_IO_SAR_DEBUG_BIT_SEL : R/W ;bitpos:[27:23] ;default: 5'h0 ; */
/*description: */
#define RTC_IO_SAR_DEBUG_BIT_SEL 0x0000001F
#define RTC_IO_SAR_DEBUG_BIT_SEL_M ((RTC_IO_SAR_DEBUG_BIT_SEL_V)<<(RTC_IO_SAR_DEBUG_BIT_SEL_S))
#define RTC_IO_SAR_DEBUG_BIT_SEL_V 0x1F
#define RTC_IO_SAR_DEBUG_BIT_SEL_S 23
#define RTC_IO_DATE_REG (DR_REG_RTCIO_BASE + 0xc8)
/* RTC_IO_IO_DATE : R/W ;bitpos:[27:0] ;default: 28'h1603160 ; */
/*description: date*/
#define RTC_IO_IO_DATE 0x0FFFFFFF
#define RTC_IO_IO_DATE_M ((RTC_IO_IO_DATE_V)<<(RTC_IO_IO_DATE_S))
#define RTC_IO_IO_DATE_V 0xFFFFFFF
#define RTC_IO_IO_DATE_S 0
#define RTC_IO_RTC_IO_DATE_VERSION 0x1703160
#endif /*_SOC_RTC_IO_REG_H_ */
Reference in a new issue View git blame Copy permalink