OVMS3-idf/components/ethernet/include/esp_eth.h
suda-morris 15070ea648 add promiscuous mode control in emac driver
1. add promiscuous mode control in emac driver
2. fix minor bugs in IP101 driver
2019-05-08 17:15:21 +08:00

322 lines
9.6 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __ESP_ETH_H__
#define __ESP_ETH_H__
#ifdef __cplusplus
extern "C" {
#endif
#include <stdbool.h>
#include <stdint.h>
#include "esp_event_base.h"
#include "esp_types.h"
#include "esp_err.h"
/**
* @brief Ethernet interface mode
*
*/
typedef enum {
ETH_MODE_RMII = 0, /*!< RMII mode */
ETH_MODE_MII, /*!< MII mode */
} eth_mode_t;
/**
* @brief Ethernet clock mode
*
*/
typedef enum {
ETH_CLOCK_GPIO0_IN = 0, /*!< RMII clock input to GPIO0 */
ETH_CLOCK_GPIO0_OUT = 1, /*!< RMII clock output from GPIO0 */
ETH_CLOCK_GPIO16_OUT = 2, /*!< RMII clock output from GPIO16 */
ETH_CLOCK_GPIO17_OUT = 3 /*!< RMII clock output from GPIO17 */
} eth_clock_mode_t;
/**
* @brief Ethernet Speed
*
*/
typedef enum {
ETH_SPEED_MODE_10M = 0, /*!< Ethernet speed: 10Mbps */
ETH_SPEED_MODE_100M, /*!< Ethernet speed: 100Mbps */
} eth_speed_mode_t;
/**
* @brief Ethernet Duplex
*
*/
typedef enum {
ETH_MODE_HALFDUPLEX = 0, /*!< Ethernet half duplex */
ETH_MODE_FULLDUPLEX, /*!< Ethernet full duplex */
} eth_duplex_mode_t;
/**
* @brief Ethernet PHY address
*
*/
typedef enum {
PHY0 = 0, /*!< PHY address 0 */
PHY1, /*!< PHY address 1 */
PHY2, /*!< PHY address 2 */
PHY3, /*!< PHY address 3 */
PHY4, /*!< PHY address 4 */
PHY5, /*!< PHY address 5 */
PHY6, /*!< PHY address 6 */
PHY7, /*!< PHY address 7 */
PHY8, /*!< PHY address 8 */
PHY9, /*!< PHY address 9 */
PHY10, /*!< PHY address 10 */
PHY11, /*!< PHY address 11 */
PHY12, /*!< PHY address 12 */
PHY13, /*!< PHY address 13 */
PHY14, /*!< PHY address 14 */
PHY15, /*!< PHY address 15 */
PHY16, /*!< PHY address 16 */
PHY17, /*!< PHY address 17 */
PHY18, /*!< PHY address 18 */
PHY19, /*!< PHY address 19 */
PHY20, /*!< PHY address 20 */
PHY21, /*!< PHY address 21 */
PHY22, /*!< PHY address 22 */
PHY23, /*!< PHY address 23 */
PHY24, /*!< PHY address 24 */
PHY25, /*!< PHY address 25 */
PHY26, /*!< PHY address 26 */
PHY27, /*!< PHY address 27 */
PHY28, /*!< PHY address 28 */
PHY29, /*!< PHY address 29 */
PHY30, /*!< PHY address 30 */
PHY31 /*!< PHY address 31 */
} eth_phy_base_t;
typedef bool (*eth_phy_check_link_func)(void);
typedef void (*eth_phy_check_init_func)(void);
typedef eth_speed_mode_t (*eth_phy_get_speed_mode_func)(void);
typedef eth_duplex_mode_t (*eth_phy_get_duplex_mode_func)(void);
typedef esp_err_t (*eth_phy_func)(void);
typedef esp_err_t (*eth_tcpip_input_func)(void *buffer, uint16_t len, void *eb);
typedef void (*eth_gpio_config_func)(void);
typedef bool (*eth_phy_get_partner_pause_enable_func)(void);
typedef void (*eth_phy_power_enable_func)(bool enable);
/**
* @brief ethernet configuration
*
*/
typedef struct {
eth_phy_base_t phy_addr; /*!< PHY address (0~31) */
eth_mode_t mac_mode; /*!< MAC mode: only support RMII now */
eth_clock_mode_t clock_mode; /*!< external/internal clock mode selection */
eth_tcpip_input_func tcpip_input; /*!< tcpip input func */
eth_phy_func phy_init; /*!< phy init func */
eth_phy_check_link_func phy_check_link; /*!< phy check link func */
eth_phy_check_init_func phy_check_init; /*!< phy check init func */
eth_phy_get_speed_mode_func phy_get_speed_mode; /*!< phy check init func */
eth_phy_get_duplex_mode_func phy_get_duplex_mode; /*!< phy check init func */
eth_gpio_config_func gpio_config; /*!< gpio config func */
bool flow_ctrl_enable; /*!< flag of flow ctrl enable */
eth_phy_get_partner_pause_enable_func phy_get_partner_pause_enable; /*!< get partner pause enable */
eth_phy_power_enable_func phy_power_enable; /*!< enable or disable phy power */
uint32_t reset_timeout_ms; /*!< timeout value for reset emac */
bool promiscuous_enable; /*!< set true to enable promiscuous mode */
} eth_config_t;
/** Ethernet event declarations */
typedef enum {
ETHERNET_EVENT_START, /**< ESP32 ethernet start */
ETHERNET_EVENT_STOP, /**< ESP32 ethernet stop */
ETHERNET_EVENT_CONNECTED, /**< ESP32 ethernet phy link up */
ETHERNET_EVENT_DISCONNECTED, /**< ESP32 ethernet phy link down */
} eth_event_t;
/** @brief Ethernet event base declaration */
ESP_EVENT_DECLARE_BASE(ETH_EVENT);
/**
* @brief Init ethernet mac
*
* @note config can not be NULL, and phy chip must be suitable to phy init func.
*
* @param[in] config mac init data.
*
* @return
* - ESP_OK
* - ESP_FAIL
*/
esp_err_t esp_eth_init(eth_config_t *config);
/**
* @brief Deinit ethernet mac
*
* @return
* - ESP_OK
* - ESP_FAIL
* - ESP_ERR_INVALID_STATE
*/
esp_err_t esp_eth_deinit(void);
/**
* @brief Init Ethernet mac driver only
*
* For the most part, you need not call this function directly. It gets called
* from esp_eth_init().
*
* This function may be called, if you only need to initialize the Ethernet
* driver without having to use the network stack on top.
*
* @note config can not be NULL, and phy chip must be suitable to phy init func.
* @param[in] config mac init data.
*
* @return
* - ESP_OK
* - ESP_FAIL
*/
esp_err_t esp_eth_init_internal(eth_config_t *config);
/**
* @brief Send packet from tcp/ip to mac
*
* @note buf can not be NULL, size must be less than 1580
*
* @param[in] buf: start address of packet data.
*
* @param[in] size: size (byte) of packet data.
*
* @return
* - ESP_OK
* - ESP_FAIL
*/
esp_err_t esp_eth_tx(uint8_t *buf, uint16_t size);
/**
* @brief Enable ethernet interface
*
* @note Should be called after esp_eth_init
*
* @return
* - ESP_OK
* - ESP_FAIL
*/
esp_err_t esp_eth_enable(void);
/**
* @brief Disable ethernet interface
*
* @note Should be called after esp_eth_init
*
* @return
* - ESP_OK
* - ESP_FAIL
*/
esp_err_t esp_eth_disable(void);
/**
* @brief Get mac addr
*
* @note mac addr must be a valid unicast address
*
* @param[out] mac: start address of mac address.
*/
void esp_eth_get_mac(uint8_t mac[6]);
/**
* @brief Write PHY reg with SMI interface.
*
* @note PHY base addr must be right.
*
* @param[in] reg_num: PHY reg num.
*
* @param[in] value: value which is written to PHY reg.
*/
void esp_eth_smi_write(uint32_t reg_num, uint16_t value);
/**
* @brief Read PHY reg with SMI interface.
*
* @note PHY base addr must be right.
*
* @param[in] reg_num: PHY reg num.
*
* @return value that is read from PHY reg
*/
uint16_t esp_eth_smi_read(uint32_t reg_num);
/**
* @brief Continuously read a PHY register over SMI interface, wait until the register has the desired value.
*
* @note PHY base address must be right.
*
* @param reg_num: PHY register number
* @param value: Value to wait for (masked with value_mask)
* @param value_mask: Mask of bits to match in the register.
* @param timeout_ms: Timeout to wait for this value (milliseconds). 0 means never timeout.
*
* @return ESP_OK if desired value matches, ESP_ERR_TIMEOUT if timed out.
*/
esp_err_t esp_eth_smi_wait_value(uint32_t reg_num, uint16_t value, uint16_t value_mask, int timeout_ms);
/**
* @brief Continuously read a PHY register over SMI interface, wait until the register has all bits in a mask set.
*
* @note PHY base address must be right.
*
* @param reg_num: PHY register number
* @param value_mask: Value mask to wait for (all bits in this mask must be set)
* @param timeout_ms: Timeout to wait for this value (milliseconds). 0 means never timeout.
*
* @return ESP_OK if desired value matches, ESP_ERR_TIMEOUT if timed out.
*/
static inline esp_err_t esp_eth_smi_wait_set(uint32_t reg_num, uint16_t value_mask, int timeout_ms)
{
return esp_eth_smi_wait_value(reg_num, value_mask, value_mask, timeout_ms);
}
/**
* @brief Free emac rx buf.
*
* @note buf can not be null, and it is tcpip input buf.
*
* @param[in] buf: start address of received packet data.
*
*/
void esp_eth_free_rx_buf(void *buf);
/**
* @brief Set mac of ethernet interface.
*
* @note user can call this function after emac_init, and the new mac address will be enabled after emac_enable.
*
* @param[in] mac: the Mac address.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_INVALID_MAC: invalid mac address
*/
esp_err_t esp_eth_set_mac(const uint8_t mac[6]);
/**
* @brief Get Ethernet link speed
*
* @return eth_speed_mode_t ETH_SPEED_MODE_10M when link speed is 10Mbps
* ETH_SPEED_MODE_100M when link speed is 100Mbps
*/
eth_speed_mode_t esp_eth_get_speed(void);
#ifdef __cplusplus
}
#endif
#endif