OVMS3-idf/components/driver/test/adc_dma_test/test_esp32.c
houwenxiang b35d9002f3 driver(I2S): Fix i2s_comm_format_t configuration parameter does not match the TRM bug.
When I2S `i2s_comm_format_t` is set to `I2S_COMM_FORMAT_I2S_MSB`, the data should launch at first BCK. But not in fact, this MR fixed this issue.

For compatibility, several nwe parameters have been added, and the old parameters will be removed in the future.

    closes https://github.com/espressif/esp-idf/issues/5065

    closes https://github.com/espressif/esp-idf/issues/4957

    closes https://github.com/espressif/esp-idf/issues/2978

    closes https://github.com/espressif/esp-idf/issues/5136

    Merges https://github.com/espressif/esp-idf/pull/4522
2020-05-18 19:55:30 +08:00

141 lines
No EOL
4.3 KiB
C

// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
/*
Tests for the adc device driver
*/
#include "esp_system.h"
#include "driver/adc.h"
#include "driver/dac.h"
#include "driver/rtc_io.h"
#include "driver/gpio.h"
#include "unity.h"
#include "esp_system.h"
#include "esp_event.h"
#include "esp_wifi.h"
#include "esp_log.h"
#include "nvs_flash.h"
#include "test_utils.h"
#if !DISABLED_FOR_TARGETS(ESP8266, ESP32S2) // This testcase for ESP32
/*
* ADC DMA testcase
*/
#include "driver/i2s.h"
//i2s number
#define EXAMPLE_I2S_NUM (0)
//i2s sample rate
#define EXAMPLE_I2S_SAMPLE_RATE (16000)
//i2s data bits
#define EXAMPLE_I2S_SAMPLE_BITS (16)
//enable display buffer for debug
#define EXAMPLE_I2S_BUF_DEBUG (0)
//I2S read buffer length
#define EXAMPLE_I2S_READ_LEN (16 * 1024)
//I2S data format
#define EXAMPLE_I2S_FORMAT (I2S_CHANNEL_FMT_RIGHT_LEFT)
//I2S channel number
#define EXAMPLE_I2S_CHANNEL_NUM ((EXAMPLE_I2S_FORMAT < I2S_CHANNEL_FMT_ONLY_RIGHT) ? (2) : (1))
//I2S built-in ADC unit
#define I2S_ADC_UNIT ADC_UNIT_1
//I2S built-in ADC channel
//#define I2S_ADC_CHANNEL //adc1_ch[0]
//flash record size, for recording 5 seconds' data
#define FLASH_RECORD_SIZE (EXAMPLE_I2S_CHANNEL_NUM * EXAMPLE_I2S_SAMPLE_RATE * EXAMPLE_I2S_SAMPLE_BITS / 8 * 5)
#define FLASH_ERASE_SIZE (FLASH_RECORD_SIZE % FLASH_SECTOR_SIZE == 0) ? FLASH_RECORD_SIZE : FLASH_RECORD_SIZE + (FLASH_SECTOR_SIZE - FLASH_RECORD_SIZE % FLASH_SECTOR_SIZE)
//sector size of flash
#define FLASH_SECTOR_SIZE (0x1000)
#define ADC1_TEST_CHANNEL_NUM 3
#define ADC2_TEST_CHANNEL_NUM 3
static const int adc1_ch[ADC1_TEST_CHANNEL_NUM] = {
ADC1_CHANNEL_2,
ADC1_CHANNEL_3,
ADC1_CHANNEL_4,
};
/**
* @brief I2S ADC/DAC mode init.
*/
static void example_i2s_init(void)
{
int i2s_num = EXAMPLE_I2S_NUM;
i2s_config_t i2s_config = {
.mode = I2S_MODE_MASTER | I2S_MODE_RX | I2S_MODE_TX | I2S_MODE_DAC_BUILT_IN | I2S_MODE_ADC_BUILT_IN,
.sample_rate = EXAMPLE_I2S_SAMPLE_RATE,
.bits_per_sample = EXAMPLE_I2S_SAMPLE_BITS,
.channel_format = EXAMPLE_I2S_FORMAT,
.intr_alloc_flags = 0,
.dma_buf_count = 2,
.dma_buf_len = 1024,
.use_apll = 1,
};
//install and start i2s driver
TEST_ESP_OK( i2s_driver_install(i2s_num, &i2s_config, 0, NULL) );
//init ADC pad
TEST_ESP_OK( i2s_set_adc_mode(I2S_ADC_UNIT, adc1_ch[0]) );
}
static void example_i2s_deinit(void)
{
TEST_ESP_OK( i2s_driver_uninstall(EXAMPLE_I2S_NUM) );
}
/**
* @brief debug buffer data
*/
static void example_disp_buf(uint8_t *buf, int length)
{
printf("======\n");
for (int i = 0; i < length; i++) {
printf("%02x ", buf[i]);
if ((i + 1) % 8 == 0) {
printf("\n");
}
}
printf("======\n");
}
TEST_CASE("ADC DMA read", "[adc dma]")
{
example_i2s_init();
int i2s_read_len = EXAMPLE_I2S_READ_LEN;
int flash_wr_size = 0;
size_t bytes_read;
char *i2s_read_buff = (char *) calloc(i2s_read_len, sizeof(char));
TEST_ESP_OK( i2s_adc_enable(EXAMPLE_I2S_NUM) );
while (flash_wr_size < FLASH_RECORD_SIZE) {
//read data from I2S bus, in this case, from ADC.
TEST_ESP_OK( i2s_read(EXAMPLE_I2S_NUM, (void *) i2s_read_buff, i2s_read_len, &bytes_read, portMAX_DELAY) );
example_disp_buf((uint8_t *) i2s_read_buff, 64);
//save original data from I2S(ADC) into flash.
flash_wr_size += i2s_read_len;
ets_printf("Sound recording %u%%\n", flash_wr_size * 100 / FLASH_RECORD_SIZE);
}
TEST_ESP_OK( i2s_adc_disable(EXAMPLE_I2S_NUM) );
if (i2s_read_buff) {
free(i2s_read_buff);
i2s_read_buff = NULL;
}
example_i2s_deinit();
}
#endif // !DISABLED_FOR_TARGETS(ESP8266, ESP32S2)