OVMS3-idf/components/esp_rom/include/esp32/rom/secure_boot.h

114 lines
3.7 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "sdkconfig.h"
#ifndef _ROM_SECURE_BOOT_H_
#define _ROM_SECURE_BOOT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
void ets_secure_boot_start(void);
void ets_secure_boot_finish(void);
void ets_secure_boot_hash(const uint32_t *buf);
void ets_secure_boot_obtain(void);
int ets_secure_boot_check(uint32_t *buf);
void ets_secure_boot_rd_iv(uint32_t *buf);
void ets_secure_boot_rd_abstract(uint32_t *buf);
bool ets_secure_boot_check_start(uint8_t abs_index, uint32_t iv_addr);
int ets_secure_boot_check_finish(uint32_t *abstract);
#ifdef CONFIG_ESP32_REV_MIN_3
#define SECURE_BOOT_NUM_BLOCKS 1
typedef enum {
SBV2_SUCCESS = 0x3A5A5AA5,
SBV2_FAILED = 0xA533885A,
} secure_boot_v2_status_t;
/* Secure Boot Version 2 - Public Key format */
typedef struct {
uint8_t n[384]; /* Public key modulus */
uint32_t e; /* Public key exponent */
uint8_t rinv[384];
uint32_t mdash;
} ets_rsa_pubkey_t;
/* Secure Boot Version 2 signature format for ESP32 ECO3 */
typedef struct {
uint8_t magic_byte;
uint8_t version;
uint8_t _reserved1;
uint8_t _reserved2;
uint8_t image_digest[32];
ets_rsa_pubkey_t key;
uint8_t signature[384];
uint32_t block_crc;
uint8_t _padding[16];
} ets_secure_boot_sig_block_t;
/* Multiple key block support */
struct ets_secure_boot_signature {
ets_secure_boot_sig_block_t block[SECURE_BOOT_NUM_BLOCKS];
uint8_t _padding[4096 - (sizeof(ets_secure_boot_sig_block_t) * SECURE_BOOT_NUM_BLOCKS)];
};
typedef struct ets_secure_boot_signature ets_secure_boot_signature_t;
/** @brief Verifies the signature block appended to a firmware image. Implemented in the ROM.
*
* This function is used to verify the bootloader before burning its public key hash into Efuse.
* Also, it is used to verify the app on loading the image on boot and on OTA.
*
* @param sig The signature block flashed aligned 4096 bytes from the firmware.
* @param image_digest The SHA-256 Digest of the firmware to be verified
* @param trusted_key_digest The SHA-256 Digest of the public key (ets_rsa_pubkey_t) of a single signature block.
* @param verified_digest RSA-PSS signature of image_digest. Pass an uninitialised array.
*
* @return SBV2_SUCCESS if signature is valid
* SBV2_FAILED for failures.
*/
secure_boot_v2_status_t ets_secure_boot_verify_signature(const ets_secure_boot_signature_t *sig, const uint8_t *image_digest, const uint8_t *trusted_key_digest, uint8_t *verified_digest);
/** @brief This function verifies the 1st stage bootloader. Implemented in the ROM.
* Reboots post verification. It reads the Efuse key for verification of the public key.
*
* This function is not used in the current workflow.
*
*/
void ets_secure_boot_verify_boot_bootloader(void);
/** @brief Confirms if the secure boot V2 has been enabled. Implemented in the ROM.
*
* In ESP32-ECO3 - It checks the value of ABS_DONE_1 in EFuse.
*
* @return true if is Secure boot v2 has been enabled
* False if Secure boot v2 has not been enabled.
*/
bool ets_use_secure_boot_v2();
#endif /* CONFIG_ESP32_REV_MIN_3 */
#endif /* _ROM_SECURE_BOOT_H_ */