Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
OVMS3-idf/components/bootloader_support/src/bootloader_flash_config.c
chenjianqiang cf2062f1d7 bugfix(flash): add flash config in app startup 
We fixed some flash bugs in bootloader, but for the users used the old
vrsion bootloader, they can not fix these bugs via OTA, the solution is
add these updates in app startup.

These updates include:
1. SPI flash gpio matrix and drive strength configuration
2. SPI flash clock configuration
3. SPI flash read dummy configuration
4. SPI flash cs timing configuration
5. Update flash id of g_rom_flashchip
2019-08-27 21:04:36 +08:00

165 lines
7.1 KiB
C
Raw Blame History

// Copyright 2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdbool.h>
#include <assert.h>
#include "string.h"
#include "sdkconfig.h"
#include "esp_err.h"
#include "esp_log.h"
#include "rom/gpio.h"
#include "rom/spi_flash.h"
#include "rom/efuse.h"
#include "soc/gpio_periph.h"
#include "soc/efuse_reg.h"
#include "soc/spi_reg.h"
#include "soc/spi_pins.h"
#include "flash_qio_mode.h"
#include "bootloader_flash_config.h"
void bootloader_flash_update_id()
{
g_rom_flashchip.device_id = bootloader_read_flash_id();
}
void IRAM_ATTR bootloader_flash_cs_timing_config()
{
SET_PERI_REG_MASK(SPI_USER_REG(0), SPI_CS_HOLD_M | SPI_CS_SETUP_M);
SET_PERI_REG_BITS(SPI_CTRL2_REG(0), SPI_HOLD_TIME_V, 1, SPI_HOLD_TIME_S);
SET_PERI_REG_BITS(SPI_CTRL2_REG(0), SPI_SETUP_TIME_V, 0, SPI_SETUP_TIME_S);
SET_PERI_REG_MASK(SPI_USER_REG(1), SPI_CS_HOLD_M | SPI_CS_SETUP_M);
SET_PERI_REG_BITS(SPI_CTRL2_REG(1), SPI_HOLD_TIME_V, 1, SPI_HOLD_TIME_S);
SET_PERI_REG_BITS(SPI_CTRL2_REG(1), SPI_SETUP_TIME_V, 0, SPI_SETUP_TIME_S);
}
void IRAM_ATTR bootloader_flash_clock_config(const esp_image_header_t* pfhdr)
{
uint32_t spi_clk_div = 0;
switch (pfhdr->spi_speed) {
case ESP_IMAGE_SPI_SPEED_80M:
spi_clk_div = 1;
break;
case ESP_IMAGE_SPI_SPEED_40M:
spi_clk_div = 2;
break;
case ESP_IMAGE_SPI_SPEED_26M:
spi_clk_div = 3;
break;
case ESP_IMAGE_SPI_SPEED_20M:
spi_clk_div = 4;
break;
default:
break;
}
esp_rom_spiflash_config_clk(spi_clk_div, 0);
}
void IRAM_ATTR bootloader_flash_gpio_config(const esp_image_header_t* pfhdr)
{
uint32_t drv = 2;
if (pfhdr->spi_speed == ESP_IMAGE_SPI_SPEED_80M) {
drv = 3;
}
uint32_t chip_ver = REG_GET_FIELD(EFUSE_BLK0_RDATA3_REG, EFUSE_RD_CHIP_VER_PKG);
uint32_t pkg_ver = chip_ver & 0x7;
if (pkg_ver == EFUSE_RD_CHIP_VER_PKG_ESP32D2WDQ5) {
// For ESP32D2WD the SPI pins are already configured
// flash clock signal should come from IO MUX.
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_CLK_U, FUNC_SD_CLK_SPICLK);
SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_CLK_U, FUN_DRV, drv, FUN_DRV_S);
} else if (pkg_ver == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD2) {
// For ESP32PICOD2 the SPI pins are already configured
// flash clock signal should come from IO MUX.
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_CLK_U, FUNC_SD_CLK_SPICLK);
SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_CLK_U, FUN_DRV, drv, FUN_DRV_S);
} else if (pkg_ver == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD4) {
// For ESP32PICOD4 the SPI pins are already configured
// flash clock signal should come from IO MUX.
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_CLK_U, FUNC_SD_CLK_SPICLK);
SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_CLK_U, FUN_DRV, drv, FUN_DRV_S);
} else {
const uint32_t spiconfig = ets_efuse_get_spiconfig();
if (spiconfig == EFUSE_SPICONFIG_SPI_DEFAULTS) {
gpio_matrix_out(SPI_IOMUX_PIN_NUM_CS, SPICS0_OUT_IDX, 0, 0);
gpio_matrix_out(SPI_IOMUX_PIN_NUM_MISO, SPIQ_OUT_IDX, 0, 0);
gpio_matrix_in(SPI_IOMUX_PIN_NUM_MISO, SPIQ_IN_IDX, 0);
gpio_matrix_out(SPI_IOMUX_PIN_NUM_MOSI, SPID_OUT_IDX, 0, 0);
gpio_matrix_in(SPI_IOMUX_PIN_NUM_MOSI, SPID_IN_IDX, 0);
gpio_matrix_out(SPI_IOMUX_PIN_NUM_WP, SPIWP_OUT_IDX, 0, 0);
gpio_matrix_in(SPI_IOMUX_PIN_NUM_WP, SPIWP_IN_IDX, 0);
gpio_matrix_out(SPI_IOMUX_PIN_NUM_HD, SPIHD_OUT_IDX, 0, 0);
gpio_matrix_in(SPI_IOMUX_PIN_NUM_HD, SPIHD_IN_IDX, 0);
//select pin function gpio
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_DATA0_U, PIN_FUNC_GPIO);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_DATA1_U, PIN_FUNC_GPIO);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_DATA2_U, PIN_FUNC_GPIO);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_DATA3_U, PIN_FUNC_GPIO);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_CMD_U, PIN_FUNC_GPIO);
// flash clock signal should come from IO MUX.
// set drive ability for clock
PIN_FUNC_SELECT(PERIPHS_IO_MUX_SD_CLK_U, FUNC_SD_CLK_SPICLK);
SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_CLK_U, FUN_DRV, drv, FUN_DRV_S);
uint32_t flash_id = g_rom_flashchip.device_id;
if (flash_id == FLASH_ID_GD25LQ32C) {
// Set drive ability for 1.8v flash in 80Mhz.
SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_DATA0_U, FUN_DRV, 3, FUN_DRV_S);
SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_DATA1_U, FUN_DRV, 3, FUN_DRV_S);
SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_DATA2_U, FUN_DRV, 3, FUN_DRV_S);
SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_DATA3_U, FUN_DRV, 3, FUN_DRV_S);
SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_CMD_U, FUN_DRV, 3, FUN_DRV_S);
SET_PERI_REG_BITS(PERIPHS_IO_MUX_SD_CLK_U, FUN_DRV, 3, FUN_DRV_S);
}
}
}
}
void IRAM_ATTR bootloader_flash_dummy_config(const esp_image_header_t* pfhdr)
{
int spi_cache_dummy = 0;
uint32_t modebit = READ_PERI_REG(SPI_CTRL_REG(0));
if (modebit & SPI_FASTRD_MODE) {
if (modebit & SPI_FREAD_QIO) { //SPI mode is QIO
spi_cache_dummy = SPI0_R_QIO_DUMMY_CYCLELEN;
} else if (modebit & SPI_FREAD_DIO) { //SPI mode is DIO
spi_cache_dummy = SPI0_R_DIO_DUMMY_CYCLELEN;
SET_PERI_REG_BITS(SPI_USER1_REG(0), SPI_USR_ADDR_BITLEN_V, SPI0_R_DIO_ADDR_BITSLEN, SPI_USR_ADDR_BITLEN_S);
} else if(modebit & (SPI_FREAD_QUAD | SPI_FREAD_DUAL)) { //SPI mode is QOUT or DIO
spi_cache_dummy = SPI0_R_FAST_DUMMY_CYCLELEN;
}
}
extern uint8_t g_rom_spiflash_dummy_len_plus[];
switch (pfhdr->spi_speed) {
case ESP_IMAGE_SPI_SPEED_80M:
g_rom_spiflash_dummy_len_plus[0] = ESP_ROM_SPIFLASH_DUMMY_LEN_PLUS_80M;
g_rom_spiflash_dummy_len_plus[1] = ESP_ROM_SPIFLASH_DUMMY_LEN_PLUS_80M;
break;
case ESP_IMAGE_SPI_SPEED_40M:
g_rom_spiflash_dummy_len_plus[0] = ESP_ROM_SPIFLASH_DUMMY_LEN_PLUS_40M;
g_rom_spiflash_dummy_len_plus[1] = ESP_ROM_SPIFLASH_DUMMY_LEN_PLUS_40M;
break;
case ESP_IMAGE_SPI_SPEED_26M:
case ESP_IMAGE_SPI_SPEED_20M:
g_rom_spiflash_dummy_len_plus[0] = ESP_ROM_SPIFLASH_DUMMY_LEN_PLUS_20M;
g_rom_spiflash_dummy_len_plus[1] = ESP_ROM_SPIFLASH_DUMMY_LEN_PLUS_20M;
break;
default:
break;
}
SET_PERI_REG_BITS(SPI_USER1_REG(0), SPI_USR_DUMMY_CYCLELEN_V, spi_cache_dummy + g_rom_spiflash_dummy_len_plus[0],
SPI_USR_DUMMY_CYCLELEN_S);
}
Reference in a new issue View git blame Copy permalink