Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
OVMS3-idf/components/ethernet/eth_phy/phy_tlk110.c
morris 20b7f0ec87 ethernet: fix infinite loop when init phy or reset mac 
1. fix infinite loop problem when init phy device
2. fix infinite loop problem when reset mac
3. fix little bugs in ethernetif_init
4. fix incompatible return value between lwip and esp-idf

Closes https://github.com/espressif/esp-idf/issues/2331
Closes https://github.com/espressif/esp-idf/issues/2141
2018-09-20 10:09:38 +08:00

179 lines
6.8 KiB
C
Raw Blame History

// Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "esp_attr.h"
#include "esp_log.h"
#include "esp_eth.h"
#include "eth_phy/phy_tlk110.h"
#include "eth_phy/phy_reg.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
/* Value of MII_PHY_IDENTIFIER_REG for TI TLK110,
Excluding bottom 4 bytes of ID2, used for model revision
*/
#define TLK110_PHY_ID1 0x2000
#define TLK110_PHY_ID2 0xa210
#define TLK110_PHY_ID2_MASK 0xFFF0
/* TLK110-specific registers */
#define SW_STRAP_CONTROL_REG (0x9)
#define SW_STRAP_CONFIG_DONE BIT(15)
#define AUTO_MDIX_ENABLE BIT(14)
#define AUTO_NEGOTIATION_ENABLE BIT(13)
#define AN_1 BIT(12)
#define AN_0 BIT(11)
#define LED_CFG BIT(10)
#define RMII_ENHANCED_MODE BIT(9)
#define DEFAULT_STRAP_CONFIG (AUTO_MDIX_ENABLE|AUTO_NEGOTIATION_ENABLE|AN_1|AN_0|LED_CFG)
#define PHY_STATUS_REG (0x10)
#define AUTO_NEGOTIATION_STATUS BIT(4)
#define DUPLEX_STATUS BIT(2)
#define SPEED_STATUS BIT(1)
#define CABLE_DIAGNOSTIC_CONTROL_REG (0x1e)
#define DIAGNOSTIC_DONE BIT(1)
#define PHY_RESET_CONTROL_REG (0x1f)
#define SOFTWARE_RESET BIT(15)
static const char *TAG = "tlk110";
void phy_tlk110_check_phy_init(void)
{
phy_tlk110_dump_registers();
esp_eth_smi_wait_set(MII_BASIC_MODE_STATUS_REG, MII_AUTO_NEGOTIATION_COMPLETE, 0);
esp_eth_smi_wait_set(PHY_STATUS_REG, AUTO_NEGOTIATION_STATUS, 0);
esp_eth_smi_wait_set(CABLE_DIAGNOSTIC_CONTROL_REG, DIAGNOSTIC_DONE, 0);
}
eth_speed_mode_t phy_tlk110_get_speed_mode(void)
{
if ((esp_eth_smi_read(PHY_STATUS_REG) & SPEED_STATUS ) != SPEED_STATUS) {
ESP_LOGD(TAG, "phy_tlk110_get_speed_mode(100)");
return ETH_SPEED_MODE_100M;
} else {
ESP_LOGD(TAG, "phy_tlk110_get_speed_mode(10)");
return ETH_SPEED_MODE_10M;
}
}
eth_duplex_mode_t phy_tlk110_get_duplex_mode(void)
{
if ((esp_eth_smi_read(PHY_STATUS_REG) & DUPLEX_STATUS ) == DUPLEX_STATUS) {
ESP_LOGD(TAG, "phy_tlk110_get_duplex_mode(FULL)");
return ETH_MODE_FULLDUPLEX;
} else {
ESP_LOGD(TAG, "phy_tlk110_get_duplex_mode(HALF)");
return ETH_MODE_HALFDUPLEX;
}
}
void phy_tlk110_power_enable(bool enable)
{
if (enable) {
esp_eth_smi_write(SW_STRAP_CONTROL_REG, DEFAULT_STRAP_CONFIG | SW_STRAP_CONFIG_DONE);
// TODO: only do this if config.flow_ctrl_enable == true
phy_mii_enable_flow_ctrl();
}
}
esp_err_t phy_tlk110_init(void)
{
ESP_LOGD(TAG, "phy_tlk110_init()");
phy_tlk110_dump_registers();
esp_eth_smi_write(PHY_RESET_CONTROL_REG, SOFTWARE_RESET);
esp_err_t res1, res2;
// Call esp_eth_smi_wait_value() with a timeout so it prints an error periodically
res1 = esp_eth_smi_wait_value(MII_PHY_IDENTIFIER_1_REG, TLK110_PHY_ID1, UINT16_MAX, 1000);
res2 = esp_eth_smi_wait_value(MII_PHY_IDENTIFIER_2_REG, TLK110_PHY_ID2, TLK110_PHY_ID2_MASK, 1000);
esp_eth_smi_write(SW_STRAP_CONTROL_REG,
DEFAULT_STRAP_CONFIG | SW_STRAP_CONFIG_DONE);
ets_delay_us(300);
// TODO: only do this if config.flow_ctrl_enable == true
phy_mii_enable_flow_ctrl();
if (res1 == ESP_OK && res2 == ESP_OK) {
return ESP_OK;
} else {
return ESP_ERR_TIMEOUT;
}
}
const eth_config_t phy_tlk110_default_ethernet_config = {
// PHY address configured by PHYADx pins. Default value of 0x1
// is used if all pins are unconnected.
.phy_addr = 0x1,
.mac_mode = ETH_MODE_RMII,
.clock_mode = ETH_CLOCK_GPIO0_IN,
//Only FULLDUPLEX mode support flow ctrl now!
.flow_ctrl_enable = true,
.phy_init = phy_tlk110_init,
.phy_check_init = phy_tlk110_check_phy_init,
.phy_check_link = phy_mii_check_link_status,
.phy_get_speed_mode = phy_tlk110_get_speed_mode,
.phy_get_duplex_mode = phy_tlk110_get_duplex_mode,
.phy_get_partner_pause_enable = phy_mii_get_partner_pause_enable,
.phy_power_enable = phy_tlk110_power_enable,
.reset_timeout_ms = 1000
};
void phy_tlk110_dump_registers()
{
ESP_LOGD(TAG, "TLK110 Registers:");
ESP_LOGD(TAG, "BMCR 0x%04x", esp_eth_smi_read(0x0));
ESP_LOGD(TAG, "BMSR 0x%04x", esp_eth_smi_read(0x1));
ESP_LOGD(TAG, "PHYIDR1 0x%04x", esp_eth_smi_read(0x2));
ESP_LOGD(TAG, "PHYIDR2 0x%04x", esp_eth_smi_read(0x3));
ESP_LOGD(TAG, "ANAR 0x%04x", esp_eth_smi_read(0x4));
ESP_LOGD(TAG, "ANLPAR 0x%04x", esp_eth_smi_read(0x5));
ESP_LOGD(TAG, "ANER 0x%04x", esp_eth_smi_read(0x6));
ESP_LOGD(TAG, "ANNPTR 0x%04x", esp_eth_smi_read(0x7));
ESP_LOGD(TAG, "ANLNPTR 0x%04x", esp_eth_smi_read(0x8));
ESP_LOGD(TAG, "SWSCR1 0x%04x", esp_eth_smi_read(0x9));
ESP_LOGD(TAG, "SWSCR2 0x%04x", esp_eth_smi_read(0xa));
ESP_LOGD(TAG, "SWSCR3 0x%04x", esp_eth_smi_read(0xb));
ESP_LOGD(TAG, "REGCR 0x%04x", esp_eth_smi_read(0xd));
ESP_LOGD(TAG, "ADDAR 0x%04x", esp_eth_smi_read(0xe));
ESP_LOGD(TAG, "PHYSTS 0x%04x", esp_eth_smi_read(0x10));
ESP_LOGD(TAG, "PHYSCR 0x%04x", esp_eth_smi_read(0x11));
ESP_LOGD(TAG, "MISR1 0x%04x", esp_eth_smi_read(0x12));
ESP_LOGD(TAG, "MISR2 0x%04x", esp_eth_smi_read(0x13));
ESP_LOGD(TAG, "FCSCR 0x%04x", esp_eth_smi_read(0x14));
ESP_LOGD(TAG, "RECR 0x%04x", esp_eth_smi_read(0x15));
ESP_LOGD(TAG, "BISCR 0x%04x", esp_eth_smi_read(0x16));
ESP_LOGD(TAG, "RBR 0x%04x", esp_eth_smi_read(0x17));
ESP_LOGD(TAG, "LEDCR 0x%04x", esp_eth_smi_read(0x18));
ESP_LOGD(TAG, "PHYCR 0x%04x", esp_eth_smi_read(0x19));
ESP_LOGD(TAG, "10BTSCR 0x%04x", esp_eth_smi_read(0x1a));
ESP_LOGD(TAG, "BICSR1 0x%04x", esp_eth_smi_read(0x1b));
ESP_LOGD(TAG, "BICSR2 0x%04x", esp_eth_smi_read(0x1c));
ESP_LOGD(TAG, "CDCR 0x%04x", esp_eth_smi_read(0x1e));
ESP_LOGD(TAG, "TRXCPSR 0x%04x", esp_eth_smi_read(0x42));
ESP_LOGD(TAG, "PWRBOCR 0x%04x", esp_eth_smi_read(0xae));
ESP_LOGD(TAG, "VRCR 0x%04x", esp_eth_smi_read(0xD0));
ESP_LOGD(TAG, "ALCDRR1 0x%04x", esp_eth_smi_read(0x155));
ESP_LOGD(TAG, "CDSCR1 0x%04x", esp_eth_smi_read(0x170));
ESP_LOGD(TAG, "CDSCR2 0x%04x", esp_eth_smi_read(0x171));
}
Reference in a new issue View git blame Copy permalink