OVMS3-idf/examples/peripherals/adc2/main/adc2_example_main.c
fuzhibo baa7898e35 driver(adc/dac): fix adc dac driver for esp32s2
1. update register file about adc; 2. fix adc driver; 3. add UT for adc/dac;

See merge request espressif/esp-idf!7776
2020-04-01 12:41:51 +08:00

69 lines
2.2 KiB
C

/* ADC2 Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <stdio.h>
#include <stdlib.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "driver/gpio.h"
#include "driver/adc.h"
#include "driver/dac.h"
#include "esp_system.h"
#define DAC_EXAMPLE_CHANNEL CONFIG_EXAMPLE_DAC_CHANNEL
#define ADC2_EXAMPLE_CHANNEL CONFIG_EXAMPLE_ADC2_CHANNEL
#if CONFIG_IDF_TARGET_ESP32
static const adc_bits_width_t width = ADC_WIDTH_BIT_12;
#elif CONFIG_IDF_TARGET_ESP32S2
static const adc_bits_width_t width = ADC_WIDTH_BIT_13;
#endif
void app_main(void)
{
uint8_t output_data=0;
int read_raw;
esp_err_t r;
gpio_num_t adc_gpio_num, dac_gpio_num;
r = adc2_pad_get_io_num( ADC2_EXAMPLE_CHANNEL, &adc_gpio_num );
assert( r == ESP_OK );
r = dac_pad_get_io_num( DAC_EXAMPLE_CHANNEL, &dac_gpio_num );
assert( r == ESP_OK );
printf("ADC2 channel %d @ GPIO %d, DAC channel %d @ GPIO %d.\n", ADC2_EXAMPLE_CHANNEL, adc_gpio_num,
DAC_EXAMPLE_CHANNEL + 1, dac_gpio_num );
dac_output_enable( DAC_EXAMPLE_CHANNEL );
//be sure to do the init before using adc2.
printf("adc2_init...\n");
adc2_config_channel_atten( ADC2_EXAMPLE_CHANNEL, ADC_ATTEN_0db );
vTaskDelay(2 * portTICK_PERIOD_MS);
printf("start conversion.\n");
while(1) {
dac_output_voltage( DAC_EXAMPLE_CHANNEL, output_data++ );
r = adc2_get_raw( ADC2_EXAMPLE_CHANNEL, width, &read_raw);
if ( r == ESP_OK ) {
printf("%d: %d\n", output_data, read_raw );
} else if ( r == ESP_ERR_INVALID_STATE ) {
printf("%s: ADC2 not initialized yet.\n", esp_err_to_name(r));
} else if ( r == ESP_ERR_TIMEOUT ) {
//This can not happen in this example. But if WiFi is in use, such error code could be returned.
printf("%s: ADC2 is in use by Wi-Fi.\n", esp_err_to_name(r));
} else {
printf("%s\n", esp_err_to_name(r));
}
vTaskDelay( 2 * portTICK_PERIOD_MS );
}
}