OVMS3-idf/components/freemodbus/port/port.h
Alex Lisitsyn 3abdd2207d freemodbus: fix long buffer failure
check master read write functions with array of registers)
fix master serial processing code and modbus controller to work with register array
modbus_master: add reading and writing of test value array (58 registers) to check failure is gone
remove parameter temporary buffer from modbus controller to allow more than 24 byte writes
driver: fix issue with TOUT feature
driver: fix uart_rx_timeout issue
driver: fix issue with rxfifo_tout_int_raw not triggered when received fifo_len = 120 byte and all bytes read out of fifo as result of rxfifo_full_int_raw
driver: add function uart_internal_set_always_rx_timeout() to always handle tout interrupt
examples: call uart_internal_set_always_rx_timeout() to handle tout interrupt correctly
examples: update examples to use tout feature
driver: reflect changes of uart_set_always_rx_timeout() function, change uart.c
driver: change conditions to trigger workaround for tout feature in uart.c
driver: change uart_set_always_rx_timeout()
freemodbus: fix tabs, remove commented code
driver: remove uart_ll_is_rx_idle()
2020-03-30 22:05:48 +08:00

93 lines
2.9 KiB
C

/* Copyright 2018 Espressif Systems (Shanghai) PTE LTD
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef PORT_COMMON_H_
#define PORT_COMMON_H_
#include "freertos/FreeRTOS.h"
#include "freertos/xtensa_api.h"
#include "esp_log.h" // for ESP_LOGE macro
#include "sdkconfig.h"
#define INLINE inline
#define PR_BEGIN_EXTERN_C extern "C" {
#define PR_END_EXTERN_C }
#define MB_PORT_TAG "MB_PORT_COMMON"
#define MB_BAUD_RATE_DEFAULT (115200)
#define MB_QUEUE_LENGTH (CONFIG_FMB_QUEUE_LENGTH)
#define MB_SERIAL_TASK_PRIO (CONFIG_FMB_SERIAL_TASK_PRIO)
#define MB_SERIAL_TASK_STACK_SIZE (CONFIG_FMB_SERIAL_TASK_STACK_SIZE)
#define MB_SERIAL_TOUT (3) // 3.5*8 = 28 ticks, TOUT=3 -> ~24..33 ticks
// Set buffer size for transmission
#define MB_SERIAL_BUF_SIZE (CONFIG_FMB_SERIAL_BUF_SIZE)
// common definitions for serial port implementations
#define MB_SERIAL_TX_TOUT_MS (100)
#define MB_SERIAL_TX_TOUT_TICKS pdMS_TO_TICKS(MB_SERIAL_TX_TOUT_MS) // timeout for transmission
#define MB_SERIAL_RX_TOUT_MS (1)
#define MB_SERIAL_RX_TOUT_TICKS pdMS_TO_TICKS(MB_SERIAL_RX_TOUT_MS) // timeout for receive
#define MB_SERIAL_RESP_LEN_MIN (4)
#define MB_PORT_CHECK(a, ret_val, str, ...) \
if (!(a)) { \
ESP_LOGE(MB_PORT_TAG, "%s(%u): " str, __FUNCTION__, __LINE__, ##__VA_ARGS__); \
return ret_val; \
}
#ifdef __cplusplus
PR_BEGIN_EXTERN_C
#endif /* __cplusplus */
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
typedef char BOOL;
typedef unsigned char UCHAR;
typedef char CHAR;
typedef unsigned short USHORT;
typedef short SHORT;
typedef unsigned long ULONG;
typedef long LONG;
void vMBPortEnterCritical(void);
void vMBPortExitCritical(void);
#define ENTER_CRITICAL_SECTION( ) { ESP_LOGD(MB_PORT_TAG,"%s: Port enter critical.", __func__); \
vMBPortEnterCritical(); }
#define EXIT_CRITICAL_SECTION( ) { vMBPortExitCritical(); \
ESP_LOGD(MB_PORT_TAG,"%s: Port exit critical", __func__); }
#define MB_PORT_CHECK_EVENT( event, mask ) ( event & mask )
#define MB_PORT_CLEAR_EVENT( event, mask ) do { event &= ~mask; } while(0)
#ifdef __cplusplus
PR_END_EXTERN_C
#endif /* __cplusplus */
#endif /* PORT_COMMON_H_ */