OVMS3-idf/components/esp_system/include/esp_system.h
Jiang Jiang Jian c3e6689777 Merge branch 'bugfix/customer_baidu_int_wdt_master' into 'master'
system: add soft solution for esp32 eco3 live lock issue

See merge request espressif/esp-idf!8968
2020-06-17 11:53:25 +08:00

294 lines
10 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __ESP_SYSTEM_H__
#define __ESP_SYSTEM_H__
#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"
#include "esp_attr.h"
#include "esp_bit_defs.h"
#include "esp_idf_version.h"
#include "sdkconfig.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ESP_MAC_WIFI_STA,
ESP_MAC_WIFI_SOFTAP,
ESP_MAC_BT,
ESP_MAC_ETH,
} esp_mac_type_t;
/** @cond */
#define TWO_UNIVERSAL_MAC_ADDR 2
#define FOUR_UNIVERSAL_MAC_ADDR 4
#if CONFIG_IDF_TARGET_ESP32
#define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES
#elif CONFIG_IDF_TARGET_ESP32S2
#define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32S2_UNIVERSAL_MAC_ADDRESSES
#endif
/** @endcond */
/**
* @brief Reset reasons
*/
typedef enum {
ESP_RST_UNKNOWN, //!< Reset reason can not be determined
ESP_RST_POWERON, //!< Reset due to power-on event
ESP_RST_EXT, //!< Reset by external pin (not applicable for ESP32)
ESP_RST_SW, //!< Software reset via esp_restart
ESP_RST_PANIC, //!< Software reset due to exception/panic
ESP_RST_INT_WDT, //!< Reset (software or hardware) due to interrupt watchdog
ESP_RST_TASK_WDT, //!< Reset due to task watchdog
ESP_RST_WDT, //!< Reset due to other watchdogs
ESP_RST_DEEPSLEEP, //!< Reset after exiting deep sleep mode
ESP_RST_BROWNOUT, //!< Brownout reset (software or hardware)
ESP_RST_SDIO, //!< Reset over SDIO
} esp_reset_reason_t;
/**
* Shutdown handler type
*/
typedef void (*shutdown_handler_t)(void);
/**
* @brief Register shutdown handler
*
* This function allows you to register a handler that gets invoked before
* the application is restarted using esp_restart function.
* @param handle function to execute on restart
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_STATE if the handler has already been registered
* - ESP_ERR_NO_MEM if no more shutdown handler slots are available
*/
esp_err_t esp_register_shutdown_handler(shutdown_handler_t handle);
/**
* @brief Unregister shutdown handler
*
* This function allows you to unregister a handler which was previously
* registered using esp_register_shutdown_handler function.
* - ESP_OK on success
* - ESP_ERR_INVALID_STATE if the given handler hasn't been registered before
*/
esp_err_t esp_unregister_shutdown_handler(shutdown_handler_t handle);
/**
* @brief Restart PRO and APP CPUs.
*
* This function can be called both from PRO and APP CPUs.
* After successful restart, CPU reset reason will be SW_CPU_RESET.
* Peripherals (except for WiFi, BT, UART0, SPI1, and legacy timers) are not reset.
* This function does not return.
*/
void esp_restart(void) __attribute__ ((noreturn));
/**
* @brief Get reason of last reset
* @return See description of esp_reset_reason_t for explanation of each value.
*/
esp_reset_reason_t esp_reset_reason(void);
/**
* @brief Get the size of available heap.
*
* Note that the returned value may be larger than the maximum contiguous block
* which can be allocated.
*
* @return Available heap size, in bytes.
*/
uint32_t esp_get_free_heap_size(void);
/**
* @brief Get the minimum heap that has ever been available
*
* @return Minimum free heap ever available
*/
uint32_t esp_get_minimum_free_heap_size( void );
/**
* @brief Get one random 32-bit word from hardware RNG
*
* The hardware RNG is fully functional whenever an RF subsystem is running (ie Bluetooth or WiFi is enabled). For
* random values, call this function after WiFi or Bluetooth are started.
*
* If the RF subsystem is not used by the program, the function bootloader_random_enable() can be called to enable an
* entropy source. bootloader_random_disable() must be called before RF subsystem or I2S peripheral are used. See these functions'
* documentation for more details.
*
* Any time the app is running without an RF subsystem (or bootloader_random) enabled, RNG hardware should be
* considered a PRNG. A very small amount of entropy is available due to pre-seeding while the IDF
* bootloader is running, but this should not be relied upon for any use.
*
* @return Random value between 0 and UINT32_MAX
*/
uint32_t esp_random(void);
/**
* @brief Fill a buffer with random bytes from hardware RNG
*
* @note This function has the same restrictions regarding available entropy as esp_random()
*
* @param buf Pointer to buffer to fill with random numbers.
* @param len Length of buffer in bytes
*/
void esp_fill_random(void *buf, size_t len);
/**
* @brief Set base MAC address with the MAC address which is stored in BLK3 of EFUSE or
* external storage e.g. flash and EEPROM.
*
* Base MAC address is used to generate the MAC addresses used by the networking interfaces.
* If using base MAC address stored in BLK3 of EFUSE or external storage, call this API to set base MAC
* address with the MAC address which is stored in BLK3 of EFUSE or external storage before initializing
* WiFi/BT/Ethernet.
*
* @note Base MAC must be a unicast MAC (least significant bit of first byte must be zero).
*
* @note If not using a valid OUI, set the "locally administered" bit
* (bit value 0x02 in the first byte) to avoid collisions.
*
* @param mac base MAC address, length: 6 bytes.
*
* @return ESP_OK on success
* ESP_ERR_INVALID_ARG If mac is NULL or is not a unicast MAC
*/
esp_err_t esp_base_mac_addr_set(const uint8_t *mac);
/**
* @brief Return base MAC address which is set using esp_base_mac_addr_set.
*
* @param mac base MAC address, length: 6 bytes.
*
* @return ESP_OK on success
* ESP_ERR_INVALID_MAC base MAC address has not been set
*/
esp_err_t esp_base_mac_addr_get(uint8_t *mac);
/**
* @brief Return base MAC address which was previously written to BLK3 of EFUSE.
*
* Base MAC address is used to generate the MAC addresses used by the networking interfaces.
* This API returns the custom base MAC address which was previously written to BLK3 of EFUSE.
* Writing this EFUSE allows setting of a different (non-Espressif) base MAC address. It is also
* possible to store a custom base MAC address elsewhere, see esp_base_mac_addr_set() for details.
*
* @param mac base MAC address, length: 6 bytes.
*
* @return ESP_OK on success
* ESP_ERR_INVALID_VERSION An invalid MAC version field was read from BLK3 of EFUSE
* ESP_ERR_INVALID_CRC An invalid MAC CRC was read from BLK3 of EFUSE
*/
esp_err_t esp_efuse_mac_get_custom(uint8_t *mac);
/**
* @brief Return base MAC address which is factory-programmed by Espressif in BLK0 of EFUSE.
*
* @param mac base MAC address, length: 6 bytes.
*
* @return ESP_OK on success
*/
esp_err_t esp_efuse_mac_get_default(uint8_t *mac);
/**
* @brief Read base MAC address and set MAC address of the interface.
*
* This function first get base MAC address using esp_base_mac_addr_get or reads base MAC address
* from BLK0 of EFUSE. Then set the MAC address of the interface including wifi station, wifi softap,
* bluetooth and ethernet.
*
* @param mac MAC address of the interface, length: 6 bytes.
* @param type type of MAC address, 0:wifi station, 1:wifi softap, 2:bluetooth, 3:ethernet.
*
* @return ESP_OK on success
*/
esp_err_t esp_read_mac(uint8_t* mac, esp_mac_type_t type);
/**
* @brief Derive local MAC address from universal MAC address.
*
* This function derives a local MAC address from an universal MAC address.
* A `definition of local vs universal MAC address can be found on Wikipedia
* <https://en.wikipedia.org/wiki/MAC_address#Universal_vs._local>`.
* In ESP32, universal MAC address is generated from base MAC address in EFUSE or other external storage.
* Local MAC address is derived from the universal MAC address.
*
* @param local_mac Derived local MAC address, length: 6 bytes.
* @param universal_mac Source universal MAC address, length: 6 bytes.
*
* @return ESP_OK on success
*/
esp_err_t esp_derive_local_mac(uint8_t* local_mac, const uint8_t* universal_mac);
/**
* @brief Trigger a software abort
*
* @param details Details that will be displayed during panic handling.
*/
void __attribute__((noreturn)) esp_system_abort(const char* details);
/**
* @brief Chip models
*/
typedef enum {
CHIP_ESP32 = 1, //!< ESP32
CHIP_ESP32S2 = 2, //!< ESP32-S2
CHIP_ESP32S3 = 4, //!< ESP32-S3
} esp_chip_model_t;
/* Chip feature flags, used in esp_chip_info_t */
#define CHIP_FEATURE_EMB_FLASH BIT(0) //!< Chip has embedded flash memory
#define CHIP_FEATURE_WIFI_BGN BIT(1) //!< Chip has 2.4GHz WiFi
#define CHIP_FEATURE_BLE BIT(4) //!< Chip has Bluetooth LE
#define CHIP_FEATURE_BT BIT(5) //!< Chip has Bluetooth Classic
/**
* @brief The structure represents information about the chip
*/
typedef struct {
esp_chip_model_t model; //!< chip model, one of esp_chip_model_t
uint32_t features; //!< bit mask of CHIP_FEATURE_x feature flags
uint8_t cores; //!< number of CPU cores
uint8_t revision; //!< chip revision number
} esp_chip_info_t;
/**
* @brief Fill an esp_chip_info_t structure with information about the chip
* @param[out] out_info structure to be filled
*/
void esp_chip_info(esp_chip_info_t* out_info);
#if CONFIG_ESP32_ECO3_CACHE_LOCK_FIX
/**
* @brief Cache lock bug exists or not
*
* @return
* - ture : bug exists
* - false : bug not exists
*/
bool soc_has_cache_lock_bug(void);
#endif
#ifdef __cplusplus
}
#endif
#endif /* __ESP_SYSTEM_H__ */