OVMS3-idf/examples/bluetooth/ble_ibeacon/main/ibeacon_demo.c

184 lines
6.5 KiB
C

// Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
/****************************************************************************
*
* This file is for iBeacon demo. It supports both iBeacon sender and receiver
* which is distinguished by macros IBEACON_SENDER and IBEACON_RECEIVER,
*
* iBeacon is a trademark of Apple Inc. Before building devices which use iBeacon technology,
* visit https://developer.apple.com/ibeacon/ to obtain a license.
*
****************************************************************************/
#include <stdint.h>
#include <string.h>
#include <stdbool.h>
#include <stdio.h>
#include "controller.h"
#include "nvs_flash.h"
#include "esp_bt.h"
#include "esp_gap_ble_api.h"
#include "esp_gattc_api.h"
#include "esp_gatt_defs.h"
#include "esp_bt_main.h"
#include "esp_ibeacon_api.h"
static const char* DEMO_TAG = "IBEACON_DEMO";
extern esp_ble_ibeacon_vendor_t vendor_config;
///Declare static functions
static void esp_gap_cb(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param);
#if (IBEACON_MODE == IBEACON_RECEIVER)
static esp_ble_scan_params_t ble_scan_params = {
.scan_type = BLE_SCAN_TYPE_ACTIVE,
.own_addr_type = BLE_ADDR_TYPE_PUBLIC,
.scan_filter_policy = BLE_SCAN_FILTER_ALLOW_ALL,
.scan_interval = 0x50,
.scan_window = 0x30
};
#elif (IBEACON_MODE == IBEACON_SENDER)
static esp_ble_adv_params_t ble_adv_params = {
.adv_int_min = 0x20,
.adv_int_max = 0x40,
.adv_type = ADV_TYPE_NONCONN_IND,
.own_addr_type = BLE_ADDR_TYPE_PUBLIC,
.channel_map = ADV_CHNL_ALL,
.adv_filter_policy = ADV_FILTER_ALLOW_SCAN_ANY_CON_ANY,
};
#endif
static void esp_gap_cb(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param)
{
switch (event) {
case ESP_GAP_BLE_ADV_DATA_RAW_SET_COMPLETE_EVT:{
#if (IBEACON_MODE == IBEACON_SENDER)
esp_ble_gap_start_advertising(&ble_adv_params);
#endif
break;
}
case ESP_GAP_BLE_SCAN_PARAM_SET_COMPLETE_EVT: {
#if (IBEACON_MODE == IBEACON_RECEIVER)
//the unit of the duration is second, 0 means scan permanently
uint32_t duration = 0;
esp_ble_gap_start_scanning(duration);
#endif
break;
}
case ESP_GAP_BLE_SCAN_START_COMPLETE_EVT:
//scan start complete event to indicate scan start successfully or failed
if (param->scan_start_cmpl.status != ESP_BT_STATUS_SUCCESS) {
ESP_LOGE(DEMO_TAG, "Scan start failed");
}
break;
case ESP_GAP_BLE_ADV_START_COMPLETE_EVT:
//adv start complete event to indicate adv start successfully or failed
if (param->adv_start_cmpl.status != ESP_BT_STATUS_SUCCESS) {
ESP_LOGE(DEMO_TAG, "Adv start failed");
}
break;
case ESP_GAP_BLE_SCAN_RESULT_EVT: {
esp_ble_gap_cb_param_t *scan_result = (esp_ble_gap_cb_param_t *)param;
switch (scan_result->scan_rst.search_evt) {
case ESP_GAP_SEARCH_INQ_RES_EVT:
/* Search for BLE iBeacon Packet */
if (esp_ble_is_ibeacon_packet(scan_result->scan_rst.ble_adv, scan_result->scan_rst.adv_data_len)){
esp_ble_ibeacon_t *ibeacon_data = (esp_ble_ibeacon_t*)(scan_result->scan_rst.ble_adv);
ESP_LOGI(DEMO_TAG, "----------iBeacon Found----------");
esp_log_buffer_hex("IBEACON_DEMO: Device address:", scan_result->scan_rst.bda, BD_ADDR_LEN );
esp_log_buffer_hex("IBEACON_DEMO: Proximity UUID:", ibeacon_data->ibeacon_vendor.proximity_uuid, ESP_UUID_LEN_128);
uint16_t major = ENDIAN_CHANGE_U16(ibeacon_data->ibeacon_vendor.major);
uint16_t minor = ENDIAN_CHANGE_U16(ibeacon_data->ibeacon_vendor.minor);
ESP_LOGI(DEMO_TAG, "Major: 0x%04x (%d)", major, major);
ESP_LOGI(DEMO_TAG, "Minor: 0x%04x (%d)", minor, minor);
ESP_LOGI(DEMO_TAG, "Measured power (RSSI at a 1m distance):%d dbm", ibeacon_data->ibeacon_vendor.measured_power);
ESP_LOGI(DEMO_TAG, "RSSI of packet:%d dbm", scan_result->scan_rst.rssi);
}
break;
default:
break;
}
break;
}
case ESP_GAP_BLE_SCAN_STOP_COMPLETE_EVT:
if (param->scan_stop_cmpl.status != ESP_BT_STATUS_SUCCESS){
ESP_LOGE(DEMO_TAG, "Scan stop failed");
}
else {
ESP_LOGI(DEMO_TAG, "Stop scan successfully");
}
break;
case ESP_GAP_BLE_ADV_STOP_COMPLETE_EVT:
if (param->adv_stop_cmpl.status != ESP_BT_STATUS_SUCCESS){
ESP_LOGE(DEMO_TAG, "Adv stop failed");
}
else {
ESP_LOGI(DEMO_TAG, "Stop adv successfully");
}
break;
default:
break;
}
}
void ble_ibeacon_appRegister(void)
{
esp_err_t status;
ESP_LOGI(DEMO_TAG, "register callback");
//register the scan callback function to the gap module
if ((status = esp_ble_gap_register_callback(esp_gap_cb)) != ESP_OK) {
ESP_LOGE(DEMO_TAG, "gap register error, error code = %x", status);
return;
}
}
void ble_ibeacon_init(void)
{
esp_bluedroid_init();
esp_bluedroid_enable();
ble_ibeacon_appRegister();
}
void app_main()
{
ESP_ERROR_CHECK(nvs_flash_init());
esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
esp_bt_controller_init(&bt_cfg);
esp_bt_controller_enable(ESP_BT_MODE_BTDM);
ble_ibeacon_init();
/* set scan parameters */
#if (IBEACON_MODE == IBEACON_RECEIVER)
esp_ble_gap_set_scan_params(&ble_scan_params);
#elif (IBEACON_MODE == IBEACON_SENDER)
esp_ble_ibeacon_t ibeacon_adv_data;
esp_err_t status = esp_ble_config_ibeacon_data (&vendor_config, &ibeacon_adv_data);
if (status == ESP_OK){
esp_ble_gap_config_adv_data_raw((uint8_t*)&ibeacon_adv_data, sizeof(ibeacon_adv_data));
}
else {
ESP_LOGE(DEMO_TAG, "Config iBeacon data failed, status =0x%x\n", status);
}
#endif
}