OVMS3-idf/examples/security/flash_encryption/main/flash_encrypt_main.c
Hemal Gujarathi a68c7c21e1 Improve flash encryption documentation and add Development & Release modes
This MR improves existing flash encryption document to provide simplified steps
Adds two new modes for user: Development & Release
Adds a simple example
Supports encrypted write through make command
2019-06-25 23:41:18 +00:00

67 lines
2.2 KiB
C

/* Flash encryption Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <stdio.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "soc/efuse_reg.h"
#include "esp_efuse.h"
#include "esp_system.h"
#include "esp_spi_flash.h"
#include "esp_flash_encrypt.h"
#include "esp_efuse_table.h"
void app_main()
{
uint32_t flash_crypt_cnt = 0;
esp_flash_enc_mode_t mode;
printf("\nSample program to check Flash Encryption\n");
/* Print chip information */
esp_chip_info_t chip_info;
esp_chip_info(&chip_info);
printf("This is ESP32 chip with %d CPU cores, WiFi%s%s, ",
chip_info.cores,
(chip_info.features & CHIP_FEATURE_BT) ? "/BT" : "",
(chip_info.features & CHIP_FEATURE_BLE) ? "/BLE" : "");
printf("silicon revision %d, ", chip_info.revision);
printf("%dMB %s flash\n", spi_flash_get_chip_size() / (1024 * 1024),
(chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "embedded" : "external");
esp_efuse_read_field_blob(ESP_EFUSE_FLASH_CRYPT_CNT, &flash_crypt_cnt, 7);
if (esp_flash_encryption_enabled()) {
printf("Flash encryption feature is enabled\n");
mode = esp_get_flash_encryption_mode();
if (mode == ESP_FLASH_ENC_MODE_DEVELOPMENT) {
printf("Flash encryption mode is DEVELOPMENT\n");
/* If odd bits set flash encryption is enabled else disabled */
if (__builtin_parity(flash_crypt_cnt) == 1) {
printf("Flash in encrypted mode with flash_crypt_cnt = %d\n", flash_crypt_cnt);
}
else {
printf("Flash in plaintext mode with flash_crypt_cnt = %d\n", flash_crypt_cnt);
}
} else {
printf("Flash encryption mode is RELEASE\n");
}
}
else {
printf("FLASH_CRYPT_CNT eFuse value is %d\n", flash_crypt_cnt);
printf("Flash encryption feature is disabled\n\n");
}
printf("Halting...\n");
while(1) {
vTaskDelay(1000 / portTICK_PERIOD_MS);
}
}