122 lines
4 KiB
C
122 lines
4 KiB
C
/*
|
|
Tests for the dac device driver
|
|
*/
|
|
#include "esp_system.h"
|
|
#include "driver/adc.h"
|
|
#include "driver/dac.h"
|
|
#include "unity.h"
|
|
#include "esp_system.h"
|
|
#include "esp_event.h"
|
|
#include "esp_wifi.h"
|
|
#include "esp_log.h"
|
|
#include "nvs_flash.h"
|
|
#include "test_utils.h"
|
|
#include "driver/i2s.h"
|
|
|
|
static const char *TAG = "test_dac";
|
|
|
|
#ifdef CONFIG_IDF_TARGET_ESP32
|
|
#define ADC_TEST_WIDTH ADC_WIDTH_BIT_12
|
|
#elif defined CONFIG_IDF_TARGET_ESP32S2
|
|
#define ADC_TEST_WIDTH ADC_WIDTH_BIT_13 //ESP32S2 only support 13 bit width
|
|
#endif
|
|
#define ADC_TEST_ATTEN ADC_ATTEN_DB_11
|
|
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
#define ADC_TEST_CHANNEL_NUM ADC2_CHANNEL_8 // GPIO25
|
|
#define DAC_TEST_CHANNEL_NUM DAC_CHANNEL_1 // GPIO25
|
|
#elif CONFIG_IDF_TARGET_ESP32S2
|
|
#define ADC_TEST_CHANNEL_NUM ADC2_CHANNEL_6 // GPIO17
|
|
#define DAC_TEST_CHANNEL_NUM DAC_CHANNEL_1 // GPIO17
|
|
#endif
|
|
|
|
#define DAC_OUT_MAX (200)
|
|
#define DAC_OUT_TIMES (10)
|
|
#define DAC_OUT_STEP (DAC_OUT_MAX / DAC_OUT_TIMES)
|
|
|
|
#define DAC_TEST_TIMES (100)
|
|
|
|
TEST_CASE("DAC output (RTC) check by adc", "[dac]")
|
|
{
|
|
gpio_num_t adc_gpio_num, dac_gpio_num;
|
|
|
|
TEST_ESP_OK( adc2_pad_get_io_num( ADC_TEST_CHANNEL_NUM, &adc_gpio_num ) );
|
|
TEST_ESP_OK( dac_pad_get_io_num( DAC_TEST_CHANNEL_NUM, &dac_gpio_num ) );
|
|
|
|
printf("Please connect ADC2 CH%d-GPIO%d <--> DAC CH%d-GPIO%d.\n", ADC_TEST_CHANNEL_NUM, adc_gpio_num,
|
|
DAC_TEST_CHANNEL_NUM + 1, dac_gpio_num );
|
|
|
|
TEST_ESP_OK( dac_output_enable( DAC_TEST_CHANNEL_NUM ) );
|
|
|
|
//be sure to do the init before using adc2.
|
|
printf("adc2_init...\n");
|
|
TEST_ESP_OK( adc2_config_channel_atten( ADC_TEST_CHANNEL_NUM, ADC_TEST_ATTEN ) );
|
|
|
|
vTaskDelay(2 * portTICK_RATE_MS);
|
|
|
|
printf("start conversion.\n");
|
|
int output_data = 0;
|
|
int read_raw = 0, read_old = 0;
|
|
for (int i = 0; i < DAC_OUT_TIMES; i++) {
|
|
TEST_ESP_OK( dac_output_voltage( DAC_TEST_CHANNEL_NUM, output_data ) );
|
|
output_data += DAC_OUT_STEP;
|
|
vTaskDelay(2 * portTICK_RATE_MS);
|
|
TEST_ESP_OK( adc2_get_raw( ADC_TEST_CHANNEL_NUM, ADC_TEST_WIDTH, &read_raw) );
|
|
ESP_LOGI(TAG, "DAC%d - ADC%d", output_data, read_raw);
|
|
if (read_old != 0) {
|
|
TEST_ASSERT_GREATER_THAN(read_old, read_raw);
|
|
}
|
|
read_old = read_raw;
|
|
}
|
|
TEST_ESP_OK( dac_output_disable( DAC_TEST_CHANNEL_NUM ) );
|
|
}
|
|
|
|
TEST_CASE("DAC cw generator output (RTC) check by adc", "[dac]")
|
|
{
|
|
gpio_num_t adc_gpio_num, dac_gpio_num;
|
|
|
|
TEST_ESP_OK( adc2_pad_get_io_num( ADC_TEST_CHANNEL_NUM, &adc_gpio_num ) );
|
|
TEST_ESP_OK( dac_pad_get_io_num( DAC_TEST_CHANNEL_NUM, &dac_gpio_num ) );
|
|
|
|
printf("Please connect ADC2 CH%d-GPIO%d <--> DAC CH%d-GPIO%d.\n", ADC_TEST_CHANNEL_NUM, adc_gpio_num,
|
|
DAC_TEST_CHANNEL_NUM + 1, dac_gpio_num );
|
|
|
|
dac_cw_config_t cw = {
|
|
.en_ch = DAC_TEST_CHANNEL_NUM,
|
|
.scale = DAC_CW_SCALE_2,
|
|
.phase = DAC_CW_PHASE_0,
|
|
.freq = 1000,
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
.offset = 64,
|
|
#elif CONFIG_IDF_TARGET_ESP32S2
|
|
.offset = 16,
|
|
#endif
|
|
};
|
|
TEST_ESP_OK( dac_cw_generator_config(&cw) );
|
|
TEST_ESP_OK( dac_cw_generator_enable() );
|
|
TEST_ESP_OK( dac_output_enable( DAC_TEST_CHANNEL_NUM ) );
|
|
|
|
//be sure to do the init before using adc2.
|
|
printf("adc2_init...\n");
|
|
TEST_ESP_OK( adc2_config_channel_atten( ADC_TEST_CHANNEL_NUM, ADC_TEST_ATTEN ) );
|
|
|
|
vTaskDelay(2 * portTICK_RATE_MS);
|
|
|
|
printf("start conversion.\n");
|
|
int read_raw[3] = {0};
|
|
for (int i = 0; i < DAC_TEST_TIMES; i++) {
|
|
vTaskDelay(10 * portTICK_RATE_MS);
|
|
TEST_ESP_OK( adc2_get_raw( ADC_TEST_CHANNEL_NUM, ADC_TEST_WIDTH, &read_raw[0]) );
|
|
ESP_LOGI(TAG, "ADC: %d", read_raw[0]);
|
|
/* Should open after dac cali. */
|
|
// if (read_raw[0] == read_raw[1]) {
|
|
// TEST_ASSERT_NOT_EQUAL(read_raw[1], read_raw[2]);
|
|
// }
|
|
read_raw[2] = read_raw[1];
|
|
read_raw[1] = read_raw[0];
|
|
}
|
|
|
|
TEST_ESP_OK( dac_cw_generator_disable() );
|
|
TEST_ESP_OK( dac_output_disable( DAC_TEST_CHANNEL_NUM ) );
|
|
}
|