ESP BLE Mesh Node demo ========================== This demo shows how BLE Mesh device can be set up as a node with the following features: - One element - Two SIG models - **Configuration Server model**: The role of this model is mainly to configure Provisioner device’s AppKey and set up its relay function, TTL size, subscription, etc. - **OnOff Server model**: This model implements the most basic function of turning the lights on and off. The default purpose of this demo is to enable the advertising function with 20-ms non-connectable interval in BLE 5.0. You can disable this function through menuconfig: `make menuconfig --> Example Configuration --> This option facilitates sending with 20ms non-connectable interval...` For a better demonstration effect, an RGB LED can be soldered onto the ESP32-DevKitC board, by connecting their corresponding GPIO pins are GPIO\_NUM\_25, GPIO\_NUM\_26, GPIO\_NUM\_27. Then you need to select the following option in menuconfig: `make menuconfig --> Example Configuration --> Board selection for BLE Mesh --> ESP-WROOM-32` Please check the [tutorial](tutorial/Ble_Mesh_Node_Example_Walkthrough.md) for more information about this example.