initial condition: - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:2'] - - SSC SSC1 ap -Q - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] - - SSC SSC1 dhcp -Q -o 2 - ['R SSC1 C +DHCP:AP,STARTED'] - - SSC SSC1 mac -Q -o 2 - [R SSC1 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] initial condition detail: AP mode, DHCP on, will autogen a TC with initial condition APSTA1 restore cmd set: - '' - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 31.0 tag: APM1 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:2'] - - SSC SSC1 ap -Q - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] - - SSC SSC1 ap -L - ['R SSC1 RE "\+LSTA:.+,%%s"%%()'] - - SSC SSC1 dhcp -Q -o 2 - ['R SSC1 C +DHCP:AP,STARTED'] - - SSC SSC1 mac -Q -o 2 - [R SSC1 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] initial condition detail: AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 restore cmd set: - '' - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 38.0 tag: APM2 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:2'] - - SSC SSC1 ap -Q - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] - - SSC SSC1 dhcp -Q -o 2 - ['R SSC1 C +DHCP:AP,STARTED'] - - SSC SSC1 mac -Q -o 2 - [R SSC1 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] initial condition detail: AP mode, will NOT autogen a TC with initial condition APSTA1 restore cmd set: - '' - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 31.0 tag: APO1 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:2'] - - SSC SSC1 ap -Q - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] - - SSC SSC1 ap -L - ['R SSC1 RE "\+LSTA:.+,%%s"%%()'] - - SSC SSC1 dhcp -Q -o 2 - ['R SSC1 C +DHCP:AP,STARTED'] - - SSC SSC1 mac -Q -o 2 - [R SSC1 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] initial condition detail: AP mode, will NOT autogen a TC with initial condition APSTA2 restore cmd set: - '' - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 38.0 tag: APO2 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 upgrade -Q -t 1 - ['R SSC1 C BIN_ID,0'] - - SSC SSC1 upgrade -Q -t 2 -b 0 - ['R SSC1 C BIN_INFO,0'] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] force restore cmd set: - '' - - SSC SSC1 upgrade -R -r 1 -s - [R SSC1 NC ERROR C !!!ready!!!] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] - - SOC SOC1 ULISTEN - [R SOC_COM L OK] - - SOC SOC1 SETOPT REPLY BIN - [R SOC_COM C OK] - - SSC SSC1 upgrade -I -b 0 -f 0 - ['P SSC1 C +UPGRADE:OK'] - - SSC SSC1 upgrade -U -i -p -u - ['P SSC1 C +UPGRADE:SUCCEED'] - - SSC SSC1 upgrade -R -b 0 - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] initial condition detail: AP only mode, running BIN0 (located on flash id 0) restore cmd set: - '' - - SSC SSC1 upgrade -Q -t 2 -b 0 - ['R SSC1 C BIN_INFO,0'] - - SSC SSC1 upgrade -R -b 0 - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] restore post cmd set: - '' - - SSC SSC1 upgrade -D - ['R SSC1 C +UPGRADE:OK'] - - SSC SSC1 ram - ['R SSC1 A :(\d+)'] script path: InitCondBase.py start: 31.0 tag: APOBIN0 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:3'] - - SSC SSC1 ap -Q - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] - - SSC SSC1 dhcp -Q -o 2 - ['R SSC1 C +DHCP:AP,STARTED'] - - SSC SSC1 mac -Q -o 2 - [R SSC1 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] initial condition detail: testing ap on sta + ap mode (autogen by APM1) restore cmd set: - '' - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 59.0 tag: APSTA1 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:3'] - - SSC SSC1 ap -Q - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] - - SSC SSC1 ap -L - ['R SSC1 RE "\+LSTA:.+,%%s"%%()'] - - SSC SSC1 dhcp -Q -o 2 - ['R SSC1 C +DHCP:AP,STARTED'] - - SSC SSC1 mac -Q -o 2 - [R SSC1 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] initial condition detail: testing ap on sta + ap mode, PC join AP (autogen by APM2) restore cmd set: - '' - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 66.0 tag: APSTA2 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:3'] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - DELAY 5 - [''] - - ATC AT1 CWSAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - ATS AT1 AT+CWLIF - [R AT1 P ] initial condition detail: StationSoftAP mode restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 24.0 tag: ATAP1 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 C +CWMODE_CUR:3 L OK'] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CIPMUX? - ['R AT1 L +CIPMUX:1'] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - DELAY 5 - [''] - - ATC AT1 CWSAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=1 - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] initial condition detail: StationSoftAP mode, PC join Target AP, multi link, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATS AT1 AT+CIPMUX=1 - [R AT1 R *] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 31.0 tag: ATAP3 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 C +CWMODE_CUR:3 L OK'] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CIPMUX? - ['R AT1 L +CIPMUX:0'] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - DELAY 10 - [''] - - ATC AT1 CWSAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] initial condition detail: StationSoftAP mode, PC join Target AP, single link, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 45.0 tag: ATAP4 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT - [R AT1 L OK] - - ATS AT1 AT - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+RST - [R AT1 L OK] initial condition detail: StationSoftAP mode, both PC join Target AP, single link, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 3.0 tag: ATAP5 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT - [R AT1 L OK] - - ATS AT1 AT - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+RST - [R AT1 L OK] initial condition detail: StationSoftAP mode, both PC join Target AP, multi link, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 3.0 tag: ATAP6 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:2'] - - ATS AT1 AT+CWDHCP_DEF=0,1 - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=2 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=0,1 - [R AT1 R *] initial condition detail: SoftAP mode, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=2 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=0,1 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 59.0 tag: ATAPO1 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 C +CWMODE_CUR:2 L OK'] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CIPMUX? - ['R AT1 L +CIPMUX:1'] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CWDHCP_DEF=0,1 - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=2 - [R AT1 L OK] - - ATC AT1 CWSAP_DEF - [R AT1 L OK] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=1 - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CWDHCP_DEF=0,1 - [R AT1 R *] initial condition detail: SoftAP mode, PC join Target AP, multi link, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=2 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATS AT1 AT+CIPMUX=1 - [R AT1 R *] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CWDHCP_DEF=0,1 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 66.0 tag: ATAPO3 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 C +CWMODE_CUR:2 L OK'] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CIPMUX? - ['R AT1 L +CIPMUX:0'] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATS AT1 AT+CWDHCP_DEF=0,1 - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=2 - [R AT1 L OK] - - ATC AT1 CWSAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=0,1 - [R AT1 R *] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] initial condition detail: SoftAP mode, PC join Target AP, single link, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=2 - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATS AT1 AT+CWLIF - [R AT1 P ] - - ATS AT1 AT+CWDHCP_DEF=0,1 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 73.0 tag: ATAPO4 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT - [R AT1 L OK] - - ATS AT1 AT - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+RST - [R AT1 L OK] initial condition detail: SoftAP mode, both PC join Target AP, single link, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 3.0 tag: ATAPO5 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT - [R AT1 L OK] - - ATS AT1 AT - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+RST - [R AT1 L OK] initial condition detail: SoftAP mode, both PC join Target AP, multi link, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 3.0 tag: ATAPO6 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:3'] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] initial condition detail: StationSoftAP mode restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 87.0 tag: ATAPSTA1 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:3'] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] initial condition detail: StationSoftAP mode, DHCP client on restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 87.0 tag: ATAPSTA2 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:3'] - - ATS AT1 AT+CWJAP_CUR? - ['R AT1 C +CWJAP_CUR:', R AT1 P ] - - ATS AT1 AT+CIPMUX? - ['R AT1 L +CIPMUX:1'] - - ATS AT1 AT+CWDHCP_CUR? - ['R AT1 C DHCP:3'] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=1 - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] initial condition detail: StationSoftAP mode, connected to AP, multi link, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATS AT1 AT+CIPMUX=1 - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 94.0 tag: ATAPSTA3 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:3'] - - ATS AT1 AT+CWJAP_CUR? - ['R AT1 C +CWJAP_CUR:', R AT1 P ] - - ATS AT1 AT+CIPMUX? - ['R AT1 L +CIPMUX:0'] - - ATS AT1 AT+CWDHCP_CUR? - ['R AT1 C DHCP:3'] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] initial condition detail: StationSoftAP mode, connected to AP, single link, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATS AT1 AT+CWDHCP_DEF=2,1 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 101.0 tag: ATAPSTA4 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:3'] - - ATS AT1 AT+CWJAP_CUR? - ['R AT1 C +CWJAP_CUR:', R AT1 P ] - - ATS AT1 AT+CIPMUX? - ['R AT1 L +CIPMUX:1'] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATC AT1 CIPSTA_DEF - [R AT1 L OK] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=1 - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATC AT1 CIPSTA_DEF - [R AT1 L OK] initial condition detail: StationSoftAP mode, connected to AP, multi link, use static ip restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATS AT1 AT+CIPMUX=1 - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATC AT1 CIPSTA_DEF - [R AT1 L OK] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 129.0 tag: ATAPSTA5 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:3'] - - ATS AT1 AT+CWJAP_CUR? - ['R AT1 C +CWJAP_CUR:', R AT1 P ] - - ATS AT1 AT+CIPMUX? - ['R AT1 L +CIPMUX:0'] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATC AT1 CIPSTA_DEF - [R AT1 L OK] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATC AT1 CIPSTA_DEF - [R AT1 L OK] initial condition detail: StationSoftAP mode, connected to AP, single link, use static ip restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATC AT1 CIPSTA_DEF - [R AT1 L OK] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 136.0 tag: ATAPSTA6 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT - [R AT1 L OK] - - ATS AT1 AT+RESTORE - [R AT1 L OK, R AT1 C ready] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT - [R AT1 L OK] - - ATS AT1 AT+RESTORE - [R AT1 L OK, R AT1 C ready] initial condition detail: 'first time usage. Use restore function. ' restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+RESTORE - [R AT1 L OK, R AT1 C ready] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 143.0 tag: ATFTU test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT - [R AT1 L OK] - - ATS AT1 AT - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+RST - [R AT1 L OK] initial condition detail: none restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 3.0 tag: ATNone test script: InitCondBase - check cmd set: - '' - - DELAY 0.1 - [dummy] force restore cmd set: - '' - - DELAY 0.1 - [dummy] initial condition detail: none 2 restore cmd set: - '' - - DELAY 0.1 - [dummy] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 108.0 tag: ATNone2 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:1'] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 L OK] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 L OK] initial condition detail: same as STA1, but will not autogen STA+AP STA test case restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 L OK] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 10.0 tag: ATOSTA1 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:1'] - - ATS AT1 AT+CWJAP_CUR? - ['R AT1 C +CWJAP_CUR:', R AT1 P ] - - ATS AT1 AT+CIPMUX? - ['R AT1 L +CIPMUX:0'] - - ATS AT1 AT+CWDHCP_CUR? - ['R AT1 C DHCP:3'] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 R *] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] initial condition detail: same as STA4, but will not autogen STA+AP STA test case restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 R *] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 17.0 tag: ATOSTA4 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 C +CWMODE_CUR:3 C OK'] - - ATS AT2 AT+CWMODE_CUR? - ['R AT2 C +CWMODE_CUR:1 C OK'] - - ATS AT1 AT+CWJAP_CUR? - [R AT1 NC OK L ERROR] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT2 AT+CWMODE_DEF=1 - [R AT2 L OK] - - ATS AT1 AT+CWQAP - [R AT1 L OK] initial condition detail: same as OT2_1, but will not autogen STA+AP STA test case restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT2 AT+CWMODE_DEF=1 - [R AT2 L OK] - - ATS AT1 AT+CWQAP - [R AT1 L OK] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 52.0 tag: ATOT2_1 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:1'] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 L OK] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 L OK] initial condition detail: station mode, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 L OK] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 10.0 tag: ATSTA1 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:1'] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 L OK] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 L OK] initial condition detail: station mode, DHCP client on, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 L OK] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 10.0 tag: ATSTA2 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:1'] - - ATS AT1 AT+CWJAP_CUR? - ['R AT1 C +CWJAP_CUR:', R AT1 P ] - - ATS AT1 AT+CIPMUX? - ['R AT1 L +CIPMUX:1'] - - ATS AT1 AT+CWDHCP_CUR? - ['R AT1 C DHCP:3'] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 R *] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=1 - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] initial condition detail: station mode, connected to AP, multi link, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 R *] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATS AT1 AT+CIPMUX=1 - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 38.0 tag: ATSTA3 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:1'] - - ATS AT1 AT+CWJAP_CUR? - ['R AT1 C +CWJAP_CUR:', R AT1 P ] - - ATS AT1 AT+CIPMUX? - ['R AT1 L +CIPMUX:0'] - - ATS AT1 AT+CWDHCP_CUR? - ['R AT1 C DHCP:3'] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 R *] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] initial condition detail: station mode, connected to AP, single link, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATS AT1 AT+CWDHCP_DEF=1,1 - [R AT1 R *] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 17.0 tag: ATSTA4 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:1'] - - ATS AT1 AT+CWJAP_CUR? - ['R AT1 C +CWJAP_CUR:', R AT1 P ] - - ATS AT1 AT+CIPMUX? - ['R AT1 L +CIPMUX:1'] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATC AT1 CIPSTA_DEF - [R AT1 L OK] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=1 - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATC AT1 CIPSTA_DEF - [R AT1 L OK] initial condition detail: station mode, connected to AP, multi link, use static ip restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATS AT1 AT+CIPMUX=1 - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATC AT1 CIPSTA_DEF - [R AT1 L OK] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 115.0 tag: ATSTA5 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 L +CWMODE_CUR:1'] - - ATS AT1 AT+CWJAP_CUR? - ['R AT1 C +CWJAP_CUR:', R AT1 P ] - - ATS AT1 AT+CIPMUX? - ['R AT1 L +CIPMUX:0'] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATC AT1 CIPSTA_DEF - [R AT1 L OK] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATC AT1 CIPSTA_DEF - [R AT1 L OK] initial condition detail: station mode, connected to AP, single link, use static ip restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=1 - [R AT1 L OK] - - ATC AT1 CWJAP_DEF - [R AT1 L OK] - - ATS AT1 AT+CIPSERVER=0 - [R AT1 R *] - - ATC AT1 CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMUX=0 - [R AT1 L OK] - - ATS AT1 AT+CIPCLOSE - [R AT1 R *] - - ATS AT1 AT+CIPMODE=0 - [R AT1 R *] - - ATC AT1 CIPSTA_DEF - [R AT1 L OK] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 122.0 tag: ATSTA6 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 C +CWMODE_CUR:3 C OK'] - - ATS AT2 AT+CWMODE_CUR? - ['R AT2 C +CWMODE_CUR:1 C OK'] - - ATS AT1 AT+CWJAP_CUR? - [R AT1 NC OK L ERROR] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT2 AT+CWMODE_DEF=1 - [R AT2 L OK] - - ATS AT1 AT+CWQAP - [R AT1 L OK] initial condition detail: Target 1 in StationSoftAP mode, Target 2 in station mode, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=3 - [R AT1 L OK] - - ATS AT2 AT+CWMODE_DEF=1 - [R AT2 L OK] - - ATS AT1 AT+CWQAP - [R AT1 L OK] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 52.0 tag: ATT2_1 test script: InitCondBase - check cmd set: - '' - - ATS AT1 AT+CWMODE_CUR? - ['R AT1 C +CWMODE_CUR:2 C OK'] - - ATS AT2 AT+CWMODE_CUR? - ['R AT2 C +CWMODE_CUR:3 C OK'] - - ATS AT1 AT+CWJAP_CUR? - [R AT1 NC OK L ERROR] force restore cmd set: - '' - - ATS AT1 AT+RST - [R AT1 C ready] - - ATS AT1 AT+CWMODE_DEF=2 - [R AT1 L OK] - - ATS AT2 AT+CWMODE_DEF=3 - [R AT2 L OK] initial condition detail: Target 1 in SoftAP mode, Target 2 in StationSoftAP mode, use dhcp restore cmd set: - '' - - ATSO AT1 +++ - [''] - - ATS AT1 AT - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - ATS AT1 AT+CWMODE_DEF=2 - [R AT1 L OK] - - ATS AT2 AT+CWMODE_DEF=3 - [R AT2 L OK] restore post cmd set: - '' - - ATS AT1 AT+CWSTOPSMART - [R AT1 R *] - - ATS AT1 AT+SAVETRANSLINK=0 - [R AT1 R *] - - AT+SYSRAM - ['R AT1 A :(\d+)'] script path: InitCondBase.py start: 80.0 tag: ATT2_2 test script: InitCondBase - check cmd set: - '' - - ASSERT - [dummy] force restore cmd set: - '' - - SSC SSC[1-] reboot - ['P SSC[1-] C !!!ready!!!'] - - SSC SSC[1-] mesh -E -o 0 - ['P SSC[1-] C +MESH:DISABLED'] - - SSC SSC[1-] op -S -o 1 - ['P SSC[1-] C +MODE:OK'] - - SSC SSC[1-] sta -D - ['P SSC[1-] C +QAP:OK'] initial condition detail: all mesh node disabled restore cmd set: - '' - - SSC SSC[1-] mesh -E -o 0 - ['P SSC[1-] C +MESH:DISABLED'] - - SSC SSC[1-] op -S -o 1 - ['P SSC[1-] C +MODE:OK'] - - SSC SSC[1-] sta -D - ['P SSC[1-] C +QAP:OK'] restore post cmd set: - '' - - SSC SSC1 ram - ['R SSC1 A :(\d+)'] script path: InitCondBase.py start: 31.0 tag: DISABLED test script: InitCondBase - check cmd set: - '' - - ASSERT - [dummy] - - SSC SSC[1-] mesh -Q -t 4 - ['R SSC[1-] T '] - - MESHTREE - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] force restore cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC[1-] mesh -E -o 0 - ['P SSC[1-] C +MESH:DISABLED'] - - SSC SSC[1-] mesh -I -g -a 4 -k -i -p -h 5 - ['P SSC[1-] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK'] - - SSC SSC[1-] mesh -A -s -k - ['P SSC[1-] C +MESHINIT:AP,OK'] - - SSC SSC1 mesh -E -o 1 -t 2 - ['P SSC1 C +MESH:ENABLED'] - - SOC SOC1 MACCEPT GSOC1 - [R SOC_COM L OK] - - SSC SSC[2-] mesh -E -o 1 -t 2 - ['P SSC[2-] C +MESH:ENABLED'] - - DELAY 60 - [''] - - SSC SSC[1-] mesh -C - ['P SSC[1-] C +MESH:CONNECTED'] - - SSC SSC[1-] mesh -Q -t 4 - ['R SSC[1-] T '] - - MESHTREE - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] - - SSC SSC[1-] mesh -O -t 1 -o 1 - ['P SSC[1-] C +MESH:OK'] initial condition detail: all mesh node enabled as ONLINE, mesh network established restore cmd set: - '' - - SSC SSC[1-] reboot - ['P SSC[1-] C !!!ready!!!'] - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC[1-] mesh -E -o 0 - ['P SSC[1-] C +MESH:DISABLED'] - - SSC SSC[1-] mesh -I -g -a 4 -k -i -p -h 5 - ['P SSC[1-] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK'] - - SSC SSC[1-] mesh -A -s -k - ['P SSC[1-] C +MESHINIT:AP,OK'] - - SSC SSC1 mesh -E -o 1 -t 2 - ['P SSC1 C +MESH:ENABLED'] - - SOC SOC1 MACCEPT GSOC1 - [R SOC_COM L OK] - - SSC SSC[2-] mesh -E -o 1 -t 2 - ['P SSC[2-] C +MESH:ENABLED'] - - DELAY 60 - [''] - - SSC SSC[1-] mesh -C - ['P SSC[1-] C +MESH:CONNECTED'] - - SSC SSC[1-] mesh -Q -t 4 - ['R SSC[1-] T '] - - MESHTREE - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] - - SSC SSC[1-] mesh -O -t 1 -o 1 - ['P SSC[1-] C +MESH:OK'] restore post cmd set: - '' - - SSC SSC1 ram - ['R SSC1 A :(\d+)'] script path: InitCondBase.py start: 17.0 tag: ENABLED_1 test script: InitCondBase - check cmd set: - '' - - ASSERT - [dummy] - - SSC SSC[1-] mesh -Q -t 4 - ['R SSC[1-] T '] - - MESHTREE - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] force restore cmd set: - '' - - SSC SSC[1-] reboot - ['P SSC[1-] C !!!ready!!!'] - - SSC SSC[1-] mesh -I -g -a 4 -k -i -p -h 5 - ['P SSC[1-] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK'] - - SSC SSC1 mesh -A -s -k - ['P SSC1 C +MESHINIT:AP,OK'] - - SSC SSC1 mesh -E -o 1 -t 1 - ['P SSC1 C +MESH:ENABLED'] - - SSC SSC[2-] mesh -E -o 1 -t 2 - [''] - - DELAY 60 - ['P SSC[2-] C +MESH:ENABLED'] - - SSC SSC[1-] mesh -C - ['P SSC[1-] C +MESH:CONNECTED'] - - SSC SSC[1-] mesh -Q -t 4 - ['R SSC[1-] T '] - - MESHTREE - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] initial condition detail: root as LOCAL, rest node as ONLINE, mesh network established restore cmd set: - '' - - SSC SSC[1-] mesh -E -o 0 - ['P SSC[1-] C +MESH:DISABLED'] - - SSC SSC[1-] mesh -I -g -a 4 -k -i -p -h 5 - ['P SSC[1-] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK'] - - SSC SSC1 mesh -A -s -k - ['P SSC1 C +MESHINIT:AP,OK'] - - SSC SSC1 mesh -E -o 1 -t 1 - ['P SSC1 C +MESH:ENABLED'] - - SSC SSC[2-] mesh -E -o 1 -t 2 - [''] - - DELAY 60 - ['P SSC[2-] C +MESH:ENABLED'] - - SSC SSC[1-] mesh -C - ['P SSC[1-] C +MESH:CONNECTED'] - - SSC SSC[1-] mesh -Q -t 4 - ['R SSC[1-] T '] - - MESHTREE - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] restore post cmd set: - '' - - SSC SSC1 ram - ['R SSC1 A :(\d+)'] script path: InitCondBase.py start: 24.0 tag: ENABLED_2 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:2'] - - SSC SSC1 mac -Q -o 2 - [R SSC1 P ] - - SSC SSC1 espnow -D - ['R SSC1 C +ESPNOW:'] force restore cmd set: - '' - - SSC SSC[1-] reboot - ['R SSC[1-] C !!!ready!!!'] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 mac -S -m -o 2 - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 espnow -D - ['R SSC1 C +ESPNOW:'] initial condition detail: one target in AP mode and espnow is de-initialized restore cmd set: - '' - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 mac -S -m -o 2 - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 espnow -D - ['R SSC1 C +ESPNOW:'] restore post cmd set: - '' - - SSC SSC1 ram - ['R SSC1 A :(\d+)'] script path: InitCondBase.py start: 17.0 tag: NOW1 test script: InitCondBase - check cmd set: - '' - - SSC SSC[1-] op -Q - ['R SSC[1-] C +CURMODE:2'] - - SSC SSC[1-] mac -Q -o 3 - ['R SSC[1-] P ]_ap_mac> P ]_mac>'] - - SSC SSC[1-] espnow -D - ['R SSC[1-] C +ESPNOW:'] - - SSC SSC[1-] espnow -I - ['R SSC[1-] C +ESPNOW:OK'] - - SSC SSC[1-] espnow -R -t Set -r 2 - ['R SSC[1-] C +ESPNOW:OK'] force restore cmd set: - '' - - SSC SSC[1-] reboot - ['R SSC[1-] C !!!ready!!!'] - - SSC SSC[1-] op -S -o 3 - ['R SSC[1-] C +MODE:OK'] - - SSC SSC[1-] mac -S -m ]_ap_mac> -o 2 - ['R SSC[1-] C +MAC:AP,OK'] - - SSC SSC[1-] mac -S -m ]_mac> -o 1 - ['R SSC[1-] C +MAC:STA,OK'] - - SSC SSC[1-] op -S -o 2 - ['R SSC[1-] C +MODE:OK'] - - SSC SSC[1-] espnow -D - ['R SSC[1-] C +ESPNOW:'] - - SSC SSC[1-] espnow -I - ['R SSC[1-] C +ESPNOW:OK'] - - SSC SSC[1-] espnow -R -t Set -r 2 - ['R SSC[1-] C +ESPNOW:OK'] initial condition detail: multiple () targets in AP mode, espnow is initialized with self role slave restore cmd set: - '' - - SSC SSC[1-] op -S -o 3 - ['R SSC[1-] C +MODE:OK'] - - SSC SSC[1-] mac -S -m ]_ap_mac> -o 2 - ['R SSC[1-] C +MAC:AP,OK'] - - SSC SSC[1-] mac -S -m ]_mac> -o 1 - ['R SSC[1-] C +MAC:STA,OK'] - - SSC SSC[1-] op -S -o 2 - ['R SSC[1-] C +MODE:OK'] - - SSC SSC[1-] espnow -D - ['R SSC[1-] C +ESPNOW:'] - - SSC SSC[1-] espnow -I - ['R SSC[1-] C +ESPNOW:OK'] - - SSC SSC[1-] espnow -R -t Set -r 2 - ['R SSC[1-] C +ESPNOW:OK'] restore post cmd set: - '' - - SSC SSC1 ram - ['R SSC1 A :(\d+)'] script path: InitCondBase.py start: 24.0 tag: NOW2 test script: InitCondBase - check cmd set: - '' - - DELAY 0.1 - [dummy] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] initial condition detail: none restore cmd set: - '' - - DELAY 0.1 - [dummy] restore post cmd set: - '' - - DELAY 0.1 - [dummy] script path: InitCondBase.py start: 10.0 tag: None test script: InitCondBase - check cmd set: - '' - - SSC SSC1 sp -D - ['R SSC1 C +SP:OK'] force restore cmd set: - '' - - SSC SSC1 sp -D - ['R SSC1 C +SP:OK'] initial condition detail: one target and simple is de-inited restore cmd set: - '' - - SSC SSC1 sp -D - ['R SSC1 C +SP:OK'] restore post cmd set: - '' - - SSC SSC1 ram - ['R SSC1 A :(\d+)'] script path: InitCondBase.py start: 31.0 tag: PAIR1 test script: InitCondBase - check cmd set: - '' - - SSC SSC[1,2] op -Q - ['R SSC[1,2] C +MODE:[2,1]'] - - SSC SSC[1,2] mac -Q -o 3 - ['R SSC[1,2] P P '] - - SSC SSC[1,2] sp -D - ['R SSC[1,2] C +SP:OK'] - - SSC SSC[1,2] sp -I - ['R SSC[1,2] C +SP:OK'] force restore cmd set: - '' - - SSC SSC[1,2] reboot - ['R SSC[1,2] C !!!ready!!!'] - - SSC SSC[1,2] op -S -o 3 - ['R SSC[1,2] C +MODE:OK'] - - SSC SSC[1,2] mac -S -m -o 2 - ['R SSC[1,2] C +MAC:AP,OK'] - - SSC SSC[1,2] mac -S -m -o 1 - ['R SSC[1,2] C +MAC:STA,OK'] - - SSC SSC[1,2] op -S -o [2,1] - ['R SSC[1,2] C +MODE:OK'] - - SSC SSC[1,2] sp -D - ['R SSC[1,2] C +SP:OK'] - - SSC SSC[1,2] sp -I - ['R SSC[1,2] C +SP:OK'] initial condition detail: target1 in AP mode, target2 in STA mode, two targets de-init and init simple pair restore cmd set: - '' - - SSC SSC[1,2] op -S -o 3 - ['R SSC[1,2] C +MODE:OK'] - - SSC SSC[1,2] mac -S -m -o 2 - ['R SSC[1,2] C +MAC:AP,OK'] - - SSC SSC[1,2] mac -S -m -o 1 - ['R SSC[1,2] C +MAC:STA,OK'] - - SSC SSC[1,2] op -S -o [2,1] - ['R SSC[1,2] C +MODE:OK'] - - SSC SSC[1,2] sp -D - ['R SSC[1,2] C +SP:OK'] - - SSC SSC[1,2] sp -I - ['R SSC[1,2] C +SP:OK'] restore post cmd set: - '' - - SSC SSC1 ram - ['R SSC1 A :(\d+)'] script path: InitCondBase.py start: 38.0 tag: PAIR2 test script: InitCondBase - check cmd set: - '' - - SSC SSC[1,2] op -Q - ['R SSC[1,2] C +MODE:[3,3]'] - - SSC SSC[1,2] mac -Q -o 3 - ['R SSC[1,2] P P '] - - SSC SSC[1,2] sp -D - ['R SSC[1,2] C +SP:OK'] - - SSC SSC[1,2] sp -I - ['R SSC[1,2] C +SP:OK'] force restore cmd set: - '' - - SSC SSC[1,2] reboot - ['R SSC[1,2] C !!!ready!!!'] - - SSC SSC[1,2] op -S -o [3,3] - ['R SSC[1,2] C +MODE:OK'] - - SSC SSC[1,2] mac -S -m -o 2 - ['R SSC[1,2] C +MAC:AP,OK'] - - SSC SSC[1,2] mac -S -m -o 1 - ['R SSC[1,2] C +MAC:STA,OK'] - - SSC SSC[1,2] sp -D - ['R SSC[1,2] C +SP:OK'] - - SSC SSC[1,2] sp -I - ['R SSC[1,2] C +SP:OK'] initial condition detail: target1 and target2 in STA+AP mode, two targets de-init and init simple pair restore cmd set: - '' - - SSC SSC[1,2] op -S -o [3,3] - ['R SSC[1,2] C +MODE:OK'] - - SSC SSC[1,2] mac -S -m -o 2 - ['R SSC[1,2] C +MAC:AP,OK'] - - SSC SSC[1,2] mac -S -m -o 1 - ['R SSC[1,2] C +MAC:STA,OK'] - - SSC SSC[1,2] sp -D - ['R SSC[1,2] C +SP:OK'] - - SSC SSC[1,2] sp -I - ['R SSC[1,2] C +SP:OK'] restore post cmd set: - '' - - SSC SSC1 ram - ['R SSC1 A :(\d+)'] script path: InitCondBase.py start: 45.0 tag: PAIR3 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:3'] - - SSC SSC1 sta -D - ['R SSC1 C +QAP:'] - - SSC SSC1 dhcp -Q -o 1 - ['R SSC1 C +DHCP:STA,STARTED'] - - SSC SSC1 mac -Q -o 1 - [R SSC1 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 sta -D - ['R SSC1 C +QAP:'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] initial condition detail: testing sta on sta + ap mode, quit AP (autogen by STAM1) restore cmd set: - '' - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 sta -D - ['R SSC1 C +QAP:'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 45.0 tag: STAAP1 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:3'] - - SSC SSC1 sta -Q - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 dhcp -Q -o 1 - ['R SSC1 C +DHCP:STA,STARTED'] - - SSC SSC1 mac -Q -o 1 - [R SSC1 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] initial condition detail: testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) restore cmd set: - '' - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 52.0 tag: STAAP2 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 upgrade -Q -t 1 - ['R SSC1 C BIN_ID,0'] - - SSC SSC1 upgrade -Q -t 2 -b 0 - ['R SSC1 C BIN_INFO,0'] - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] force restore cmd set: - '' - - SSC SSC1 upgrade -R -r 1 -s - [R SSC1 NC ERROR C !!!ready!!!] - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] - - SOC SOC1 ULISTEN - [R SOC_COM L OK] - - SOC SOC1 SETOPT REPLY BIN - [R SOC_COM C OK] - - SSC SSC1 upgrade -I -b 0 -f 0 - ['P SSC1 C +UPGRADE:OK'] - - SSC SSC1 upgrade -U -i -p -u - ['P SSC1 C +UPGRADE:SUCCEED'] - - SSC SSC1 upgrade -R -b 0 - [R SSC1 C !!!ready!!!] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] initial condition detail: APSTA mode, connected to AP, running BIN0 (located on flash id 0) restore cmd set: - '' - - SSC SSC1 upgrade -Q -t 2 -b 0 - ['R SSC1 C BIN_INFO,0'] - - SSC SSC1 upgrade -R -b 0 - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] restore post cmd set: - '' - - SSC SSC1 upgrade -D - ['R SSC1 C +UPGRADE:OK'] - - SSC SSC1 ram - ['R SSC1 A :(\d+)'] script path: InitCondBase.py start: 24.0 tag: STAAPBIN0 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:1'] - - SSC SSC1 sta -D - ['R SSC1 C +QAP:'] - - SSC SSC1 dhcp -Q -o 1 - ['R SSC1 C +DHCP:STA,STARTED'] - - SSC SSC1 mac -Q -o 1 - [R SSC1 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 sta -D - ['R SSC1 C +QAP:'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] initial condition detail: sta mode, quit AP, DHCP on, will autogen a TC with initial condition STAAP1 restore cmd set: - '' - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 sta -D - ['R SSC1 C +QAP:'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 17.0 tag: STAM1 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:1'] - - SSC SSC1 sta -Q - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 dhcp -Q -o 1 - ['R SSC1 C +DHCP:STA,STARTED'] - - SSC SSC1 mac -Q -o 1 - [R SSC1 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] initial condition detail: sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 restore cmd set: - '' - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 24.0 tag: STAM2 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 upgrade -Q -t 1 - ['R SSC1 C BIN_ID,0'] - - SSC SSC1 upgrade -Q -t 2 -b 0 - ['R SSC1 C BIN_INFO,0'] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] force restore cmd set: - '' - - SSC SSC1 upgrade -R -r 1 -s - [R SSC1 NC ERROR C !!!ready!!!] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] - - SOC SOC1 ULISTEN - [R SOC_COM L OK] - - SOC SOC1 SETOPT REPLY BIN - [R SOC_COM C OK] - - SSC SSC1 upgrade -I -b 0 -f 0 - ['P SSC1 C +UPGRADE:OK'] - - SSC SSC1 upgrade -U -i -p -u - ['P SSC1 C +UPGRADE:SUCCEED'] - - SSC SSC1 upgrade -R -b 0 - [R SSC1 C !!!ready!!!] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] initial condition detail: STA mode, connected to AP, running BIN0 (located on flash id 0) restore cmd set: - '' - - SSC SSC1 upgrade -Q -t 2 -b 0 - ['R SSC1 C BIN_INFO,0'] - - SSC SSC1 upgrade -R -b 0 - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] restore post cmd set: - '' - - SSC SSC1 upgrade -D - ['R SSC1 C +UPGRADE:OK'] - - SSC SSC1 ram - ['R SSC1 A :(\d+)'] script path: InitCondBase.py start: 17.0 tag: STAMBIN0 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:1'] - - SSC SSC1 sta -D - ['R SSC1 C +QAP:'] - - SSC SSC1 dhcp -Q -o 1 - ['R SSC1 C +DHCP:STA,STARTED'] - - SSC SSC1 mac -Q -o 1 - [R SSC1 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 sta -D - ['R SSC1 C +QAP:'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] initial condition detail: sta mode, quit AP, will NOT autogen a TC with initial condition STAAP1 restore cmd set: - '' - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 sta -D - ['R SSC1 C +QAP:'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 17.0 tag: STAO1 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:1'] - - SSC SSC1 sta -Q - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 dhcp -Q -o 1 - ['R SSC1 C +DHCP:STA,STARTED'] - - SSC SSC1 mac -Q -o 1 - [R SSC1 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] initial condition detail: sta mode, join AP, DHCP on, will NOT autogen a TC with initial condition STAAP2 restore cmd set: - '' - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - [R SSC1 C +DHCP] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 24.0 tag: STAO2 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:2'] - - SSC SSC2 op -Q - ['R SSC2 C +CURMODE:1'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:'] - - SSC SSC2 soc -T - [''] - - SSC SSC1 dhcp -Q -o 2 - ['R SSC1 C +DHCP:AP,STARTED'] - - SSC SSC2 dhcp -Q -o 1 - ['R SSC2 C +DHCP:STA,STARTED'] - - SSC SSC1 mac -Q -o 2 - [R SSC1 P ] - - SSC SSC2 mac -Q -o 1 - [R SSC2 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC2 reboot - [R SSC2 C !!!ready!!!] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC2 op -S -o 1 - ['R SSC2 C +MODE:OK'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:'] - - SSC SSC2 soc -T - [''] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC2 dhcp -S -o 1 - [R SSC2 C +DHCP] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC2 mac -S -o 1 -m - ['R SSC2 C +MAC:STA,OK'] initial condition detail: same as T2_1 but will NOT autogen a TC with initial condition T2_2 restore cmd set: - '' - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC2 op -S -o 1 - ['R SSC2 C +MODE:OK'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:'] - - SSC SSC2 soc -T - [''] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC2 dhcp -S -o 1 - [R SSC2 C +DHCP] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC2 mac -S -o 1 -m - ['R SSC2 C +MAC:STA,OK'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 73.0 tag: T2O_1 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:2'] - - SSC SSC2 op -Q - ['R SSC2 C +CURMODE:1'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:'] - - SSC SSC2 soc -T - [''] - - SSC SSC1 dhcp -Q -o 2 - ['R SSC1 C +DHCP:AP,STARTED'] - - SSC SSC2 dhcp -Q -o 1 - ['R SSC2 C +DHCP:STA,STARTED'] - - SSC SSC1 mac -Q -o 2 - [R SSC1 P ] - - SSC SSC2 mac -Q -o 1 - [R SSC2 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC2 reboot - [R SSC2 C !!!ready!!!] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC2 op -S -o 1 - ['R SSC2 C +MODE:OK'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:'] - - SSC SSC2 soc -T - [''] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC2 dhcp -S -o 1 - [R SSC2 C +DHCP] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC2 mac -S -o 1 -m - ['R SSC2 C +MAC:STA,OK'] initial condition detail: target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 restore cmd set: - '' - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - SSC SSC2 op -S -o 1 - ['R SSC2 C +MODE:OK'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:'] - - SSC SSC2 soc -T - [''] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC2 dhcp -S -o 1 - [R SSC2 C +DHCP] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC2 mac -S -o 1 -m - ['R SSC2 C +MAC:STA,OK'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 73.0 tag: T2_1 test script: InitCondBase - check cmd set: - '' - - SSC SSC1 op -Q - ['R SSC1 C +CURMODE:3'] - - SSC SSC2 op -Q - ['R SSC2 C +CURMODE:3'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:'] - - SSC SSC2 soc -T - [R SSC2 C +CLOSEALL] - - SSC SSC1 dhcp -Q -o 2 - ['R SSC1 C +DHCP:AP,STARTED'] - - SSC SSC2 dhcp -Q -o 1 - ['R SSC2 C +DHCP:STA,STARTED'] - - SSC SSC1 mac -Q -o 2 - [R SSC1 P ] - - SSC SSC2 mac -Q -o 1 - [R SSC2 P ] force restore cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] - - SSC SSC2 reboot - [R SSC2 C !!!ready!!!] - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC2 op -S -o 3 - ['R SSC2 C +MODE:OK'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:'] - - SSC SSC2 soc -T - [R SSC2 C +CLOSEALL] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC2 dhcp -S -o 1 - [R SSC2 C +DHCP] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC2 mac -S -o 1 -m - ['R SSC2 C +MAC:STA,OK'] initial condition detail: target 1 as AP+STA, target 2 as AP+STA (autogen) restore cmd set: - '' - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC2 op -S -o 3 - ['R SSC2 C +MODE:OK'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:'] - - SSC SSC2 soc -T - [R SSC2 C +CLOSEALL] - - SSC SSC1 dhcp -S -o 2 - [R SSC1 C +DHCP] - - SSC SSC2 dhcp -S -o 1 - [R SSC2 C +DHCP] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC2 mac -S -o 1 -m - ['R SSC2 C +MAC:STA,OK'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 ram - ['R SSC1 C +FREEHEAP:'] script path: InitCondBase.py start: 80.0 tag: T2_2 test script: InitCondBase - check cmd set: - '' - - SSC SSC[1-3] op -Q - ['R SSC[1-3] C +CURMODE:3'] - - SSC SSC[1-3] phy -Q -o 3 - ['R SSC[1-3] C STA,n,40 C AP,n,40'] force restore cmd set: - '' - - SSC SSC[1-3] reboot - ['R SSC[1-3] C !!!ready!!!'] - - SSC SSC[1-3] op -S -o 3 - ['R SSC[1-3] C +MODE:OK'] - - SSC SSC[1-3] phy -S -o 3 -m n -b 40 - ['R SSC[1-3] C +PHY:OK'] initial condition detail: '1. target 1 and target 2 set to AP+STA mode, target 3 set to STA mode 2. all interface of target 2,3 set to 11n ht40 3. config softAP of target 1 and target 2' restore cmd set: - '' - - SSC SSC[1-3] op -S -o 3 - ['R SSC[1-3] C +MODE:OK'] - - SSC SSC[1-3] phy -S -o 3 -m n -b 40 - ['R SSC[1-3] C +PHY:OK'] restore post cmd set: - '' - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 sta -R -r 1 - [R SSC1 C OK] - - SSC SSC1 ram - ['R SSC1 A :(\d+)'] script path: InitCondBase.py start: 87.0 tag: T3_PHY1 test script: InitCondBase - check cmd set: - '' - - UT UT1 - - [R UT1 C Tests C Failures C Ignored] force restore cmd set: - '' - - FREBOOT UT1 - [''] - - UT UT1 - - [R UT1 C Tests C Failures C Ignored] initial condition detail: At UT menu page restore cmd set: - '' - - FREBOOT UT1 - [''] - - UT UT1 - - [R UT1 C Tests C Failures C Ignored] restore post cmd set: - '' - - DELAY 0.1 - [''] script path: InitCondBase.py tag: UTINIT1 test script: InitCondBase