// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. #ifndef __ESP_GATTS_API_H__ #define __ESP_GATTS_API_H__ #include "esp_bt_defs.h" #include "esp_gatt_defs.h" #include "esp_err.h" #ifdef __cplusplus extern "C" { #endif /// GATT Server callback function events typedef enum { ESP_GATTS_REG_EVT = 0, /*!< When register application id, the event comes */ ESP_GATTS_READ_EVT = 1, /*!< When gatt client request read operation, the event comes */ ESP_GATTS_WRITE_EVT = 2, /*!< When gatt client request write operation, the event comes */ ESP_GATTS_EXEC_WRITE_EVT = 3, /*!< When gatt client request execute write, the event comes */ ESP_GATTS_MTU_EVT = 4, /*!< When set mtu complete, the event comes */ ESP_GATTS_CONF_EVT = 5, /*!< When receive confirm, the event comes */ ESP_GATTS_UNREG_EVT = 6, /*!< When unregister application id, the event comes */ ESP_GATTS_CREATE_EVT = 7, /*!< When create service complete, the event comes */ ESP_GATTS_ADD_INCL_SRVC_EVT = 8, /*!< When add included service complete, the event comes */ ESP_GATTS_ADD_CHAR_EVT = 9, /*!< When add characteristic complete, the event comes */ ESP_GATTS_ADD_CHAR_DESCR_EVT = 10, /*!< When add descriptor complete, the event comes */ ESP_GATTS_DELETE_EVT = 11, /*!< When delete service complete, the event comes */ ESP_GATTS_START_EVT = 12, /*!< When start service complete, the event comes */ ESP_GATTS_STOP_EVT = 13, /*!< When stop service complete, the event comes */ ESP_GATTS_CONNECT_EVT = 14, /*!< When gatt client connect, the event comes */ ESP_GATTS_DISCONNECT_EVT = 15, /*!< When gatt client disconnect, the event comes */ ESP_GATTS_OPEN_EVT = 16, /*!< When connect to peer, the event comes */ ESP_GATTS_CANCEL_OPEN_EVT = 17, /*!< When disconnect from peer, the event comes */ ESP_GATTS_CLOSE_EVT = 18, /*!< When gatt server close, the event comes */ ESP_GATTS_LISTEN_EVT = 19, /*!< When gatt listen to be connected the event comes */ ESP_GATTS_CONGEST_EVT = 20, /*!< When congest happen, the event comes */ /* following is extra event */ ESP_GATTS_RESPONSE_EVT = 21, /*!< When gatt send response complete, the event comes */ } esp_gatts_cb_event_t; /** * @brief Gatt server callback parameters union */ typedef union { /** * @brief ESP_GATTS_REG_EVT */ struct gatts_reg_evt_param { esp_gatt_status_t status; /*!< Operation status */ uint16_t app_id; /*!< Application id which input in register API */ } reg; /*!< Gatt server callback param of ESP_GATTS_REG_EVT */ /** * @brief ESP_GATTS_READ_EVT */ struct gatts_read_evt_param { uint16_t conn_id; /*!< Connection id */ uint32_t trans_id; /*!< Transfer id */ esp_bd_addr_t bda; /*!< The bluetooth device address which been read */ uint16_t handle; /*!< The attribute handle */ uint16_t offset; /*!< Offset of the value, if the value is too long */ bool is_long; /*!< The value is too long or not */ } read; /*!< Gatt server callback param of ESP_GATTS_READ_EVT */ /** * @brief ESP_GATTS_WRITE_EVT */ struct gatts_write_evt_param { uint16_t conn_id; /*!< Connection id */ uint32_t trans_id; /*!< Transfer id */ esp_bd_addr_t bda; /*!< The bluetooth device address which been written */ uint16_t handle; /*!< The attribute handle */ uint16_t offset; /*!< Offset of the value, if the value is too long */ bool need_rsp; /*!< The write operation need to do response */ bool is_prep; /*!< This write operation is prepare write */ uint16_t len; /*!< The write attribute value length */ uint8_t *value; /*!< The write attribute value */ } write; /*!< Gatt server callback param of ESP_GATTS_WRITE_EVT */ /** * @brief ESP_GATTS_EXEC_WRITE_EVT */ struct gatts_exec_write_evt_param { uint16_t conn_id; /*!< Connection id */ uint32_t trans_id; /*!< Transfer id */ esp_bd_addr_t bda; /*!< The bluetooth device address which been written */ #define ESP_GATT_PREP_WRITE_CANCEL 0x00 #define ESP_GATT_PREP_WRITE_EXEC 0x01 uint8_t exec_write_flag; /*!< Execute write flag */ } exec_write; /*!< Gatt server callback param of ESP_GATTS_EXEC_WRITE_EVT */ /** * @brief ESP_GATTS_MTU_EVT */ struct gatts_mtu_evt_param { uint16_t conn_id; /*!< Connection id */ uint16_t mtu; /*!< MTU size */ } mtu; /*!< Gatt server callback param of ESP_GATTS_MTU_EVT */ /** * @brief ESP_GATTS_CONF_EVT */ struct gatts_conf_evt_param { esp_gatt_status_t status; /*!< Operation status */ uint16_t conn_id; /*!< Connection id */ } conf; /*!< Gatt server callback param of ESP_GATTS_CONF_EVT (confirm) */ /** * @brief ESP_GATTS_UNREG_EVT */ /** * @brief ESP_GATTS_CREATE_EVT */ struct gatts_create_evt_param { esp_gatt_status_t status; /*!< Operation status */ uint16_t service_handle; /*!< Service attribute handle */ esp_gatt_srvc_id_t service_id; /*!< Service id, include service uuid and other information */ } create; /*!< Gatt server callback param of ESP_GATTS_CREATE_EVT */ /** * @brief ESP_GATTS_ADD_INCL_SRVC_EVT */ struct gatts_add_incl_srvc_evt_param { esp_gatt_status_t status; /*!< Operation status */ uint16_t attr_handle; /*!< Included service attribute handle */ uint16_t service_handle; /*!< Service attribute handle */ } add_incl_srvc; /*!< Gatt server callback param of ESP_GATTS_ADD_INCL_SRVC_EVT */ /** * @brief ESP_GATTS_ADD_CHAR_EVT */ struct gatts_add_char_evt_param { esp_gatt_status_t status; /*!< Operation status */ uint16_t attr_handle; /*!< Characteristic attribute handle */ uint16_t service_handle; /*!< Service attribute handle */ esp_bt_uuid_t char_uuid; /*!< Characteristic uuid */ } add_char; /*!< Gatt server callback param of ESP_GATTS_ADD_CHAR_EVT */ /** * @brief ESP_GATTS_ADD_CHAR_DESCR_EVT */ struct gatts_add_char_descr_evt_param { esp_gatt_status_t status; /*!< Operation status */ uint16_t attr_handle; /*!< Descriptor attribute handle */ uint16_t service_handle; /*!< Service attribute handle */ esp_bt_uuid_t char_uuid; /*!< Characteristic uuid */ } add_char_descr; /*!< Gatt server callback param of ESP_GATTS_ADD_CHAR_DESCR_EVT */ /** * @brief ESP_GATTS_DELETE_EVT */ struct gatts_delete_evt_param { esp_gatt_status_t status; /*!< Operation status */ uint16_t service_handle; /*!< Service attribute handle */ } del; /*!< Gatt server callback param of ESP_GATTS_DELETE_EVT */ /** * @brief ESP_GATTS_START_EVT */ struct gatts_start_evt_param { esp_gatt_status_t status; /*!< Operation status */ uint16_t service_handle; /*!< Service attribute handle */ } start; /*!< Gatt server callback param of ESP_GATTS_START_EVT */ /** * @brief ESP_GATTS_STOP_EVT */ struct gatts_stop_evt_param { esp_gatt_status_t status; /*!< Operation status */ uint16_t service_handle; /*!< Service attribute handle */ } stop; /*!< Gatt server callback param of ESP_GATTS_STOP_EVT */ /** * @brief ESP_GATTS_CONNECT_EVT */ struct gatts_connect_evt_param { uint16_t conn_id; /*!< Connection id */ esp_bd_addr_t remote_bda; /*!< Remote bluetooth device address */ bool is_connected; /*!< Indicate it is connected or not */ } connect; /*!< Gatt server callback param of ESP_GATTS_CONNECT_EVT */ /** * @brief ESP_GATTS_DISCONNECT_EVT */ struct gatts_disconnect_evt_param { uint16_t conn_id; /*!< Connection id */ esp_bd_addr_t remote_bda; /*!< Remote bluetooth device address */ bool is_connected; /*!< Indicate it is connected or not */ } disconnect; /*!< Gatt server callback param of ESP_GATTS_DISCONNECT_EVT */ /** * @brief ESP_GATTS_OPEN_EVT */ /** * @brief ESP_GATTS_CANCEL_OPEN_EVT */ /** * @brief ESP_GATTS_CLOSE_EVT */ /** * @brief ESP_GATTS_LISTEN_EVT */ /** * @brief ESP_GATTS_CONGEST_EVT */ struct gatts_congest_evt_param { uint16_t conn_id; /*!< Connection id */ bool congested; /*!< Congested or not */ } congest; /*!< Gatt server callback param of ESP_GATTS_CONGEST_EVT */ /** * @brief ESP_GATTS_RESPONSE_EVT */ struct gatts_rsp_evt_param { esp_gatt_status_t status; /*!< Operation status */ uint16_t handle; /*!< Attribute handle which send response */ } rsp; /*!< Gatt server callback param of ESP_GATTS_RESPONSE_EVT */ } esp_ble_gatts_cb_param_t; /** * @brief GATT Server callback function type * @param event : Event type * @param gatts_if : GATT server access interface, normally * different gatts_if correspond to different profile * @param param : Point to callback parameter, currently is union type */ typedef void (* esp_gatts_cb_t)(esp_gatts_cb_event_t event, esp_gatt_if_t gatts_if, esp_ble_gatts_cb_param_t *param); /** * @brief This function is called to register application callbacks * with BTA GATTS module. * * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_register_callback(esp_gatts_cb_t callback); /** * @brief This function is called to register application identifier * * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_app_register(uint16_t app_id); /** * @brief unregister with GATT Server. * * @param[in] gatts_if: GATT server access interface * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_app_unregister(esp_gatt_if_t gatts_if); /** * @brief Create a service. When service creation is done, a callback * event BTA_GATTS_CREATE_SRVC_EVT is called to report status * and service ID to the profile. The service ID obtained in * the callback function needs to be used when adding included * service and characteristics/descriptors into the service. * * @param[in] gatts_if: GATT server access interface * @param[in] service_id: service ID. * @param[in] num_handle: number of handle requested for this service. * * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_create_service(esp_gatt_if_t gatts_if, esp_gatt_srvc_id_t *service_id, uint16_t num_handle); /** * @brief This function is called to add an included service. After included * service is included, a callback event BTA_GATTS_ADD_INCL_SRVC_EVT * is reported the included service ID. * * @param[in] service_handle: service handle to which this included service is to * be added. * @param[in] included_service_handle: the service ID to be included. * * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_add_included_service(uint16_t service_handle, uint16_t included_service_handle); /** * @brief This function is called to add a characteristic into a service. * * @param[in] service_handle: service handle to which this included service is to * be added. * @param[in] char_uuid : Characteristic UUID. * @param[in] perm : Characteristic value declaration attribute permission. * @param[in] property : Characteristic Properties * * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_add_char(uint16_t service_handle, esp_bt_uuid_t *char_uuid, esp_gatt_perm_t perm, esp_gatt_char_prop_t property); /** * @brief This function is called to add characteristic descriptor. When * it's done, a callback event BTA_GATTS_ADD_DESCR_EVT is called * to report the status and an ID number for this descriptor. * * @param[in] service_handle: service handle to which this characteristic descriptor is to * be added. * @param[in] perm: descriptor access permission. * @param[in] descr_uuid: descriptor UUID. * * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_add_char_descr (uint16_t service_handle, esp_bt_uuid_t *descr_uuid, esp_gatt_perm_t perm); /** * @brief This function is called to delete a service. When this is done, * a callback event BTA_GATTS_DELETE_EVT is report with the status. * * @param[in] service_handle: service_handle to be deleted. * * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_delete_service(uint16_t service_handle); /** * @brief This function is called to start a service. * * @param[in] service_handle: the service handle to be started. * * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_start_service(uint16_t service_handle); /** * @brief This function is called to stop a service. * * @param[in] service_handle - service to be topped. * * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_stop_service(uint16_t service_handle); /** * @brief This function is called to read a characteristics descriptor. * * @param[in] gatts_if: GATT server access interface * @param[in] conn_id - connection id to indicate. * @param[in] attr_handle - attribute handle to indicate. * @param[in] value_len - indicate value length. * @param[in] value: value to indicate. * @param[in] need_confirm - if this indication expects a confirmation or not. * * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_send_indicate(esp_gatt_if_t gatts_if, uint16_t conn_id, uint16_t attr_handle, uint16_t value_len, uint8_t *value, bool need_confirm); /** * @brief This function is called to send a response to a request. * * @param[in] gatts_if: GATT server access interface * @param[in] conn_id - connection identifier. * @param[in] trans_id - transfer id * @param[in] status - response status * @param[in] rsp - response data. * * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_send_response(esp_gatt_if_t gatts_if, uint16_t conn_id, uint32_t trans_id, esp_gatt_status_t status, esp_gatt_rsp_t *rsp); /** * @brief Open a direct open connection or add a background auto connection * * @param[in] gatts_if: GATT server access interface * @param[in] remote_bda: remote device bluetooth device address. * @param[in] is_direct: direct connection or background auto connection * * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_open(esp_gatt_if_t gatts_if, esp_bd_addr_t remote_bda, bool is_direct); /** * @brief Close a connection a remote device. * * @param[in] gatts_if: GATT server access interface * @param[in] conn_id: connection ID to be closed. * * @return * - ESP_OK : success * - other : failed * */ esp_err_t esp_ble_gatts_close(esp_gatt_if_t gatts_if, uint16_t conn_id); #ifdef __cplusplus } #endif #endif /* __ESP_GATTS_API_H__ */