/******************************************************************************
 *
 *  Copyright (C) 2009-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  Filename:      bte_main.c
 *
 *  Description:   Contains BTE core stack initialization and shutdown code
 *
 ******************************************************************************/


#include "bt_defs.h"
#include "bt_common_types.h"
#include "bte.h"
#include "btu.h"
#include "bt_trace.h"
#include "osi.h"
#include "alarm.h"
#include "fixed_queue.h"
#include "hash_map.h"
#include "hash_functions.h"
#include "controller.h"
#include "hci_layer.h"

//#include "bluedroid_test.h"
/*
#define LOG_TAG "bt_main"

#include <cutils/properties.h>
#include <fcntl.h>
#include <hardware/bluetooth.h>
#include <pthread.h>
#include <signal.h>
#include <stdlib.h>
#include <time.h>

#include "osi/include/alarm.h"
#include "bta_api.h"
#include "bt_hci_bdroid.h"
#include "bte.h"
#include "btif_common.h"
#include "btu.h"
#include "btsnoop.h"
#include "bt_utils.h"
#include "btcore/include/counter.h"
#include "btcore/include/module.h"
#include "osi/include/fixed_queue.h"
#include "osi/include/future.h"
#include "gki.h"
#include "osi/include/hash_functions.h"
#include "osi/include/hash_map.h"
#include "hci_layer.h"
#include "osi/include/osi.h"
#include "osi/include/log.h"
#include "stack_config.h"
#include "osi/include/thread.h"
*/
/*******************************************************************************
**  Constants & Macros
*******************************************************************************/

/* Run-time configuration file for BLE*/
/*
#ifndef BTE_BLE_STACK_CONF_FILE
#define BTE_BLE_STACK_CONF_FILE "/etc/bluetooth/ble_stack.conf"
#endif
*/
/******************************************************************************
**  Variables
******************************************************************************/

/*******************************************************************************
**  Static variables
*******************************************************************************/
static const hci_t *hci;
static void bte_main_enable(void);
/*******************************************************************************
**  Static functions
*******************************************************************************/

/*******************************************************************************
**  Externs
*******************************************************************************/
//extern void bte_load_ble_conf(const char *p_path);
fixed_queue_t *btu_hci_msg_queue;

bluedroid_init_done_cb_t bluedroid_init_done_cb;

/******************************************************************************
**
** Function         bte_main_boot_entry
**
** Description      BTE MAIN API - Entry point for BTE chip/stack initialization
**
** Returns          None
**
******************************************************************************/
void bte_main_boot_entry(bluedroid_init_done_cb_t cb)
{
    if (gki_init())
        LOG_ERROR("%s: Init GKI Module Failure.\n", __func__);

    hci = hci_layer_get_interface();
    if (!hci)
      LOG_ERROR("%s could not get hci layer interface.\n", __func__);

    btu_hci_msg_queue = fixed_queue_new(SIZE_MAX);
    if (btu_hci_msg_queue == NULL) {
      LOG_ERROR("%s unable to allocate hci message queue.\n", __func__);
      return;
    }

    bluedroid_init_done_cb = cb;

    //Caution: No event dispatcher defined now in hci layer 
    //data_dispatcher_register_default(hci->event_dispatcher, btu_hci_msg_queue);
    hci->set_data_queue(btu_hci_msg_queue);

    osi_alarm_init();

#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE))
    //bte_load_ble_conf(BTE_BLE_STACK_CONF_FILE);
#endif

    //Enbale HCI
    bte_main_enable();
}

/******************************************************************************
**
** Function         bte_main_shutdown
**
** Description      BTE MAIN API - Shutdown code for BTE chip/stack
**
** Returns          None
**
******************************************************************************/
void bte_main_shutdown()
{
    //data_dispatcher_register_default(hci_layer_get_interface()->event_dispatcher, NULL);
    hci->set_data_queue(NULL);
    fixed_queue_free(btu_hci_msg_queue, NULL);

    btu_hci_msg_queue = NULL;

/*
    module_clean_up(get_module(STACK_CONFIG_MODULE));

    module_clean_up(get_module(COUNTER_MODULE));
    module_clean_up(get_module(GKI_MODULE));
*/

    gki_clean_up();
}

/******************************************************************************
**
** Function         bte_main_enable
**
** Description      BTE MAIN API - Creates all the BTE tasks. Should be called
**                  part of the Bluetooth stack enable sequence
**
** Returns          None
**
******************************************************************************/
static void bte_main_enable(void)
{
    LOG_DEBUG("Enable HCI\n");
    if (hci_start_up()) {
        LOG_ERROR("Start HCI Host Layer Failure\n");
        return;
    }

    //Now Test Case Not Supported BTU
    LOG_ERROR("Startup BTU\n");
    BTU_StartUp();
}

/******************************************************************************
**
** Function         bte_main_disable
**
** Description      BTE MAIN API - Destroys all the BTE tasks. Should be called
**                  part of the Bluetooth stack disable sequence
**
** Returns          None
**
******************************************************************************/
void bte_main_disable(void)
{
/*
    APPL_TRACE_DEBUG("%s", __FUNCTION__);

    module_shut_down(get_module(HCI_MODULE));
    module_shut_down(get_module(BTSNOOP_MODULE));
*/

    hci_shut_down();

    BTU_ShutDown();
}

/******************************************************************************
**
** Function         bte_main_postload_cfg
**
** Description      BTE MAIN API - Stack postload configuration
**
** Returns          None
**
******************************************************************************/
void bte_main_postload_cfg(void)
{
    hci->do_postload();
}

#if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE)
/******************************************************************************
**
** Function         bte_main_enable_lpm
**
** Description      BTE MAIN API - Enable/Disable low power mode operation
**
** Returns          None
**
******************************************************************************/
void bte_main_enable_lpm(BOOLEAN enable)
{
    /*Enable Low power ?*/
    //hci->send_low_power_command(enable ? LPM_ENABLE : LPM_DISABLE);
}

/******************************************************************************
**
** Function         bte_main_lpm_allow_bt_device_sleep
**
** Description      BTE MAIN API - Allow BT controller goest to sleep
**
** Returns          None
**
******************************************************************************/
void bte_main_lpm_allow_bt_device_sleep()
{
    /**/
    //hci->send_low_power_command(LPM_WAKE_DEASSERT);
}

/******************************************************************************
**
** Function         bte_main_lpm_wake_bt_device
**
** Description      BTE MAIN API - Wake BT controller up if it is in sleep mode
**
** Returns          None
**
******************************************************************************/
void bte_main_lpm_wake_bt_device()
{
    //hci->send_low_power_command(LPM_WAKE_ASSERT);
}
#endif  // HCILP_INCLUDED

/******************************************************************************
**
** Function         bte_main_hci_send
**
** Description      BTE MAIN API - This function is called by the upper stack to
**                  send an HCI message. The function displays a protocol trace
**                  message (if enabled), and then calls the 'transmit' function
**                  associated with the currently selected HCI transport
**
** Returns          None
**
******************************************************************************/
void bte_main_hci_send (BT_HDR *p_msg, UINT16 event)
{
    UINT16 sub_event = event & BT_SUB_EVT_MASK;  /* local controller ID */

    p_msg->event = event;

    //counter_add("main.tx.packets", 1);
    //counter_add("main.tx.bytes", p_msg->len);

    if((sub_event == LOCAL_BR_EDR_CONTROLLER_ID) || \
       (sub_event == LOCAL_BLE_CONTROLLER_ID))
    {
        hci->transmit_downward(event, p_msg);
    }
    else
    {
        //APPL_TRACE_ERROR("Invalid Controller ID. Discarding message.");
        GKI_freebuf(p_msg);
    }
}