#include <stdio.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_spi_flash.h"
#include "esp_err.h"
#include "esp_log.h"
#include "esp_partition.h"
#include "driver/i2s.h"
#include "driver/adc.h"
#include "audio_example_file.h"
#include "esp_adc_cal.h"

static const char* TAG = "ad/da";
#define V_REF   1100
#define ADC1_TEST_CHANNEL (ADC1_CHANNEL_7)

#define PARTITION_NAME   "storage"

/*---------------------------------------------------------------
                            EXAMPLE CONFIG
---------------------------------------------------------------*/
//enable record sound and save in flash
#define RECORD_IN_FLASH_EN        (1)
//enable replay recorded sound in flash
#define REPLAY_FROM_FLASH_EN      (1)

//i2s number
#define EXAMPLE_I2S_NUM           (0)
//i2s sample rate
#define EXAMPLE_I2S_SAMPLE_RATE   (16000)
//i2s data bits
#define EXAMPLE_I2S_SAMPLE_BITS   (16)
//enable display buffer for debug
#define EXAMPLE_I2S_BUF_DEBUG     (0)
//I2S read buffer length
#define EXAMPLE_I2S_READ_LEN      (16 * 1024)
//I2S data format
#define EXAMPLE_I2S_FORMAT        (I2S_CHANNEL_FMT_RIGHT_LEFT)
//I2S channel number
#define EXAMPLE_I2S_CHANNEL_NUM   ((EXAMPLE_I2S_FORMAT < I2S_CHANNEL_FMT_ONLY_RIGHT) ? (2) : (1))
//I2S built-in ADC unit
#define I2S_ADC_UNIT              ADC_UNIT_1
//I2S built-in ADC channel
#define I2S_ADC_CHANNEL           ADC1_CHANNEL_0

//flash record size, for recording 5 seconds' data
#define FLASH_RECORD_SIZE         (EXAMPLE_I2S_CHANNEL_NUM * EXAMPLE_I2S_SAMPLE_RATE * EXAMPLE_I2S_SAMPLE_BITS / 8 * 5)
#define FLASH_ERASE_SIZE          (FLASH_RECORD_SIZE % FLASH_SECTOR_SIZE == 0) ? FLASH_RECORD_SIZE : FLASH_RECORD_SIZE + (FLASH_SECTOR_SIZE - FLASH_RECORD_SIZE % FLASH_SECTOR_SIZE)
//sector size of flash
#define FLASH_SECTOR_SIZE         (0x1000)
//flash read / write address
#define FLASH_ADDR                (0x200000)


/**
 * @brief I2S ADC/DAC mode init.
 */
void example_i2s_init()
{
	 int i2s_num = EXAMPLE_I2S_NUM;
	 i2s_config_t i2s_config = {
        .mode = I2S_MODE_MASTER | I2S_MODE_RX | I2S_MODE_TX | I2S_MODE_DAC_BUILT_IN | I2S_MODE_ADC_BUILT_IN,
        .sample_rate =  EXAMPLE_I2S_SAMPLE_RATE,
        .bits_per_sample = EXAMPLE_I2S_SAMPLE_BITS,
	    .communication_format = I2S_COMM_FORMAT_I2S_MSB,
	    .channel_format = EXAMPLE_I2S_FORMAT,
	    .intr_alloc_flags = 0,
	    .dma_buf_count = 2,
	    .dma_buf_len = 1024,
	    .use_apll = 1,
	 };
	 //install and start i2s driver
	 i2s_driver_install(i2s_num, &i2s_config, 0, NULL);
	 //init DAC pad
	 i2s_set_dac_mode(I2S_DAC_CHANNEL_BOTH_EN);
	 //init ADC pad
	 i2s_set_adc_mode(I2S_ADC_UNIT, I2S_ADC_CHANNEL);
}

/*
 * @brief erase flash for recording
 */
void example_erase_flash()
{
#if RECORD_IN_FLASH_EN
    printf("Erasing flash \n");
    const esp_partition_t *data_partition = NULL;
    data_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA,
            ESP_PARTITION_SUBTYPE_DATA_FAT, PARTITION_NAME);
    if (data_partition != NULL) {
        printf("partiton addr: 0x%08x; size: %d; label: %s\n", data_partition->address, data_partition->size, data_partition->label);
    }
    printf("Erase size: %d Bytes\n", FLASH_ERASE_SIZE);
    ESP_ERROR_CHECK(esp_partition_erase_range(data_partition, 0, FLASH_ERASE_SIZE));
#else
    printf("Skip flash erasing...\n");
#endif
}

/**
 * @brief debug buffer data
 */
void example_disp_buf(uint8_t* buf, int length)
{
#if EXAMPLE_I2S_BUF_DEBUG
    printf("======\n");
    for (int i = 0; i < length; i++) {
        printf("%02x ", buf[i]);
        if ((i + 1) % 8 == 0) {
            printf("\n");
        }
    }
    printf("======\n");
#endif
}

/**
 * @brief Reset i2s clock and mode
 */
void example_reset_play_mode()
{
    i2s_set_clk(EXAMPLE_I2S_NUM, EXAMPLE_I2S_SAMPLE_RATE, EXAMPLE_I2S_SAMPLE_BITS, EXAMPLE_I2S_CHANNEL_NUM);
}

/**
 * @brief Set i2s clock for example audio file
 */
void example_set_file_play_mode()
{
    i2s_set_clk(EXAMPLE_I2S_NUM, 16000, EXAMPLE_I2S_SAMPLE_BITS, 1);
}

/**
 * @brief Scale data to 16bit/32bit for I2S DMA output.
 *        DAC can only output 8bit data value.
 *        I2S DMA will still send 16 bit or 32bit data, the highest 8bit contains DAC data.
 */
int example_i2s_dac_data_scale(uint8_t* d_buff, uint8_t* s_buff, uint32_t len)
{
    uint32_t j = 0;
#if (EXAMPLE_I2S_SAMPLE_BITS == 16)
    for (int i = 0; i < len; i++) {
        d_buff[j++] = 0;
        d_buff[j++] = s_buff[i];
    }
    return (len * 2);
#else
    for (int i = 0; i < len; i++) {
        d_buff[j++] = 0;
        d_buff[j++] = 0;
        d_buff[j++] = 0;
        d_buff[j++] = s_buff[i];
    }
    return (len * 4);
#endif
}

/**
 * @brief Scale data to 8bit for data from ADC.
 *        Data from ADC are 12bit width by default.
 *        DAC can only output 8 bit data.
 *        Scale each 12bit ADC data to 8bit DAC data.
 */
void example_i2s_adc_data_scale(uint8_t * d_buff, uint8_t* s_buff, uint32_t len)
{
    uint32_t j = 0;
    uint32_t dac_value = 0;
#if (EXAMPLE_I2S_SAMPLE_BITS == 16)
    for (int i = 0; i < len; i += 2) {
        dac_value = ((((uint16_t) (s_buff[i + 1] & 0xf) << 8) | ((s_buff[i + 0]))));
        d_buff[j++] = 0;
        d_buff[j++] = dac_value * 256 / 4096;
    }
#else
    for (int i = 0; i < len; i += 4) {
        dac_value = ((((uint16_t)(s_buff[i + 3] & 0xf) << 8) | ((s_buff[i + 2]))));
        d_buff[j++] = 0;
        d_buff[j++] = 0;
        d_buff[j++] = 0;
        d_buff[j++] = dac_value * 256 / 4096;
    }
#endif
}

/**
 * @brief I2S ADC/DAC example
 *        1. Erase flash
 *        2. Record audio from ADC and save in flash
 *        3. Read flash and replay the sound via DAC
 *        4. Play an example audio file(file format: 8bit/8khz/single channel)
 *        5. Loop back to step 3
 */
void example_i2s_adc_dac(void*arg)
{
    const esp_partition_t *data_partition = NULL;
    data_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA,
            ESP_PARTITION_SUBTYPE_DATA_FAT, PARTITION_NAME);
    if (data_partition != NULL) {
        printf("partiton addr: 0x%08x; size: %d; label: %s\n", data_partition->address, data_partition->size, data_partition->label);
    } else {
        ESP_LOGE(TAG, "Partition error: can't find partition name: %s\n", PARTITION_NAME);
        vTaskDelete(NULL);
    }
    //1. Erase flash
    example_erase_flash();
    int i2s_read_len = EXAMPLE_I2S_READ_LEN;
    int flash_wr_size = 0;
    size_t bytes_read, bytes_written;

    //2. Record audio from ADC and save in flash
#if RECORD_IN_FLASH_EN
    char* i2s_read_buff = (char*) calloc(i2s_read_len, sizeof(char));
    uint8_t* flash_write_buff = (uint8_t*) calloc(i2s_read_len, sizeof(char));
    i2s_adc_enable(EXAMPLE_I2S_NUM);
    while (flash_wr_size < FLASH_RECORD_SIZE) {
        //read data from I2S bus, in this case, from ADC.
        i2s_read(EXAMPLE_I2S_NUM, (void*) i2s_read_buff, i2s_read_len, &bytes_read, portMAX_DELAY);
        example_disp_buf((uint8_t*) i2s_read_buff, 64);
        //save original data from I2S(ADC) into flash.
        esp_partition_write(data_partition, flash_wr_size, i2s_read_buff, i2s_read_len);
        flash_wr_size += i2s_read_len;
        ets_printf("Sound recording %u%%\n", flash_wr_size * 100 / FLASH_RECORD_SIZE);
    }
    i2s_adc_disable(EXAMPLE_I2S_NUM);
    free(i2s_read_buff);
    i2s_read_buff = NULL;
    free(flash_write_buff);
    flash_write_buff = NULL;
#endif

    uint8_t* flash_read_buff = (uint8_t*) calloc(i2s_read_len, sizeof(char));
    uint8_t* i2s_write_buff = (uint8_t*) calloc(i2s_read_len, sizeof(char));
    while (1) {

        //3. Read flash and replay the sound via DAC
#if REPLAY_FROM_FLASH_EN
        for (int rd_offset = 0; rd_offset < flash_wr_size; rd_offset += FLASH_SECTOR_SIZE) {
            //read I2S(ADC) original data from flash
            esp_partition_read(data_partition, rd_offset, flash_read_buff, FLASH_SECTOR_SIZE);
            //process data and scale to 8bit for I2S DAC.
            example_i2s_adc_data_scale(i2s_write_buff, flash_read_buff, FLASH_SECTOR_SIZE);
            //send data
            i2s_write(EXAMPLE_I2S_NUM, i2s_write_buff, FLASH_SECTOR_SIZE, &bytes_written, portMAX_DELAY);
            printf("playing: %d %%\n", rd_offset * 100 / flash_wr_size);
        }
#endif

        //4. Play an example audio file(file format: 8bit/16khz/single channel)
        printf("Playing file example: \n");
        int offset = 0;
        int tot_size = sizeof(audio_table);
        example_set_file_play_mode();
        while (offset < tot_size) {
            int play_len = ((tot_size - offset) > (4 * 1024)) ? (4 * 1024) : (tot_size - offset);
            int i2s_wr_len = example_i2s_dac_data_scale(i2s_write_buff, (uint8_t*)(audio_table + offset), play_len);
            i2s_write(EXAMPLE_I2S_NUM, i2s_write_buff, i2s_wr_len, &bytes_written, portMAX_DELAY);
            offset += play_len;
            example_disp_buf((uint8_t*) i2s_write_buff, 32);
        }
        vTaskDelay(100 / portTICK_PERIOD_MS);
        example_reset_play_mode();
    }
    free(flash_read_buff);
    free(i2s_write_buff);
    vTaskDelete(NULL);
}

void adc_read_task(void* arg)
{
    adc1_config_width(ADC_WIDTH_12Bit);
    adc1_config_channel_atten(ADC1_TEST_CHANNEL, ADC_ATTEN_11db);
    esp_adc_cal_characteristics_t characteristics;
    esp_adc_cal_characterize(ADC_UNIT_1, ADC_ATTEN_DB_11, ADC_WIDTH_BIT_12, V_REF, &characteristics);
    while(1) {
        uint32_t voltage;
        esp_adc_cal_get_voltage(ADC1_TEST_CHANNEL, &characteristics, &voltage);
        ESP_LOGI(TAG, "%d mV", voltage);
        vTaskDelay(200 / portTICK_RATE_MS);
    }
}

esp_err_t app_main()
{
    example_i2s_init();
    esp_log_level_set("I2S", ESP_LOG_INFO);
    xTaskCreate(example_i2s_adc_dac, "example_i2s_adc_dac", 1024 * 2, NULL, 5, NULL);
    xTaskCreate(adc_read_task, "ADC read task", 2048, NULL, 5, NULL);
    return ESP_OK;
}