// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at

//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#pragma once

#ifdef __cplusplus
extern "C" {
#endif

#include <stdint.h>
#include <stdbool.h>
#include "soc/ledc_caps.h"

typedef enum {
#ifdef SOC_LEDC_SUPPORT_HS_MODE
    LEDC_HIGH_SPEED_MODE = 0, /*!< LEDC high speed speed_mode */
#endif
    LEDC_LOW_SPEED_MODE,      /*!< LEDC low speed speed_mode */
    LEDC_SPEED_MODE_MAX,      /*!< LEDC speed limit */
} ledc_mode_t;

typedef enum {
    LEDC_INTR_DISABLE = 0,    /*!< Disable LEDC interrupt */
    LEDC_INTR_FADE_END,       /*!< Enable LEDC interrupt */
    LEDC_INTR_MAX,
} ledc_intr_type_t;

typedef enum {
    LEDC_DUTY_DIR_DECREASE = 0,    /*!< LEDC duty decrease direction */
    LEDC_DUTY_DIR_INCREASE = 1,    /*!< LEDC duty increase direction */
    LEDC_DUTY_DIR_MAX,
} ledc_duty_direction_t;

typedef enum {
    LEDC_SLOW_CLK_RTC8M = 0,  /*!< LEDC low speed timer clock source is 8MHz RTC clock*/
    LEDC_SLOW_CLK_APB,     /*!< LEDC low speed timer clock source is 80MHz APB clock*/
#ifdef SOC_LEDC_SUPPORT_XTAL_CLOCK
    LEDC_SLOW_CLK_XTAL,    /*!< LEDC low speed timer clock source XTAL clock*/
#endif
} ledc_slow_clk_sel_t;

typedef enum {
    LEDC_AUTO_CLK = 0,    /*!< The driver will automatically select the source clock(REF_TICK or APB) based on the giving resolution and duty parameter when init the timer*/
    LEDC_USE_REF_TICK,    /*!< LEDC timer select REF_TICK clock as source clock*/
    LEDC_USE_APB_CLK,     /*!< LEDC timer select APB clock as source clock*/
    LEDC_USE_RTC8M_CLK,   /*!< LEDC timer select RTC8M_CLK as source clock. Only for low speed channels and this parameter must be the same for all low speed channels*/
#ifdef SOC_LEDC_SUPPORT_XTAL_CLOCK
    LEDC_USE_XTAL_CLK,    /*!< LEDC timer select XTAL clock as source clock*/
#endif
} ledc_clk_cfg_t;

/* Note: Setting numeric values to match ledc_clk_cfg_t values are a hack to avoid collision with
   LEDC_AUTO_CLK in the driver, as these enums have very similar names and user may pass
   one of these by mistake. */
typedef enum  {
    LEDC_REF_TICK = LEDC_USE_REF_TICK, /*!< LEDC timer clock divided from reference tick (1Mhz) */
    LEDC_APB_CLK = LEDC_USE_APB_CLK,  /*!< LEDC timer clock divided from APB clock (80Mhz) */
} ledc_clk_src_t;


typedef enum {
    LEDC_TIMER_0 = 0, /*!< LEDC timer 0 */
    LEDC_TIMER_1,     /*!< LEDC timer 1 */
    LEDC_TIMER_2,     /*!< LEDC timer 2 */
    LEDC_TIMER_3,     /*!< LEDC timer 3 */
    LEDC_TIMER_MAX,
} ledc_timer_t;

typedef enum {
    LEDC_CHANNEL_0 = 0, /*!< LEDC channel 0 */
    LEDC_CHANNEL_1,     /*!< LEDC channel 1 */
    LEDC_CHANNEL_2,     /*!< LEDC channel 2 */
    LEDC_CHANNEL_3,     /*!< LEDC channel 3 */
    LEDC_CHANNEL_4,     /*!< LEDC channel 4 */
    LEDC_CHANNEL_5,     /*!< LEDC channel 5 */
    LEDC_CHANNEL_6,     /*!< LEDC channel 6 */
    LEDC_CHANNEL_7,     /*!< LEDC channel 7 */
    LEDC_CHANNEL_MAX,
} ledc_channel_t;

typedef enum {
    LEDC_TIMER_1_BIT = 1,   /*!< LEDC PWM duty resolution of  1 bits */
    LEDC_TIMER_2_BIT,       /*!< LEDC PWM duty resolution of  2 bits */
    LEDC_TIMER_3_BIT,       /*!< LEDC PWM duty resolution of  3 bits */
    LEDC_TIMER_4_BIT,       /*!< LEDC PWM duty resolution of  4 bits */
    LEDC_TIMER_5_BIT,       /*!< LEDC PWM duty resolution of  5 bits */
    LEDC_TIMER_6_BIT,       /*!< LEDC PWM duty resolution of  6 bits */
    LEDC_TIMER_7_BIT,       /*!< LEDC PWM duty resolution of  7 bits */
    LEDC_TIMER_8_BIT,       /*!< LEDC PWM duty resolution of  8 bits */
    LEDC_TIMER_9_BIT,       /*!< LEDC PWM duty resolution of  9 bits */
    LEDC_TIMER_10_BIT,      /*!< LEDC PWM duty resolution of 10 bits */
    LEDC_TIMER_11_BIT,      /*!< LEDC PWM duty resolution of 11 bits */
    LEDC_TIMER_12_BIT,      /*!< LEDC PWM duty resolution of 12 bits */
    LEDC_TIMER_13_BIT,      /*!< LEDC PWM duty resolution of 13 bits */
    LEDC_TIMER_14_BIT,      /*!< LEDC PWM duty resolution of 14 bits */
    LEDC_TIMER_15_BIT,      /*!< LEDC PWM duty resolution of 15 bits */
    LEDC_TIMER_16_BIT,      /*!< LEDC PWM duty resolution of 16 bits */
    LEDC_TIMER_17_BIT,      /*!< LEDC PWM duty resolution of 17 bits */
    LEDC_TIMER_18_BIT,      /*!< LEDC PWM duty resolution of 18 bits */
    LEDC_TIMER_19_BIT,      /*!< LEDC PWM duty resolution of 19 bits */
    LEDC_TIMER_20_BIT,      /*!< LEDC PWM duty resolution of 20 bits */
    LEDC_TIMER_BIT_MAX,
} ledc_timer_bit_t;

typedef enum {
    LEDC_FADE_NO_WAIT = 0,  /*!< LEDC fade function will return immediately */
    LEDC_FADE_WAIT_DONE,    /*!< LEDC fade function will block until fading to the target duty */
    LEDC_FADE_MAX,
} ledc_fade_mode_t;

/**
 * @brief Configuration parameters of LEDC channel for ledc_channel_config function
 */
typedef struct {
    int gpio_num;                   /*!< the LEDC output gpio_num, if you want to use gpio16, gpio_num = 16 */
    ledc_mode_t speed_mode;         /*!< LEDC speed speed_mode, high-speed mode or low-speed mode */
    ledc_channel_t channel;         /*!< LEDC channel (0 - 7) */
    ledc_intr_type_t intr_type;     /*!< configure interrupt, Fade interrupt enable  or Fade interrupt disable */
    ledc_timer_t timer_sel;         /*!< Select the timer source of channel (0 - 3) */
    uint32_t duty;                  /*!< LEDC channel duty, the range of duty setting is [0, (2**duty_resolution)] */
    int hpoint;                     /*!< LEDC channel hpoint value, the max value is 0xfffff */
} ledc_channel_config_t;

/**
 * @brief Configuration parameters of LEDC Timer timer for ledc_timer_config function
 */
typedef struct {
    ledc_mode_t speed_mode;                /*!< LEDC speed speed_mode, high-speed mode or low-speed mode */
    union {
        ledc_timer_bit_t duty_resolution;  /*!< LEDC channel duty resolution */
        ledc_timer_bit_t bit_num __attribute__((deprecated)); /*!< Deprecated in ESP-IDF 3.0. This is an alias to 'duty_resolution' for backward compatibility with ESP-IDF 2.1 */
    };
    ledc_timer_t  timer_num;               /*!< The timer source of channel (0 - 3) */
    uint32_t freq_hz;                      /*!< LEDC timer frequency (Hz) */
    ledc_clk_cfg_t clk_cfg;                /*!< Configure LEDC source clock.
                                                For low speed channels and high speed channels, you can specify the source clock using LEDC_USE_REF_TICK, LEDC_USE_APB_CLK or LEDC_AUTO_CLK.
                                                For low speed channels, you can also specify the source clock using LEDC_USE_RTC8M_CLK, in this case, all low speed channel's source clock must be RTC8M_CLK*/
} ledc_timer_config_t;

#ifdef __cplusplus
}
#endif