/* usb_dc.h - USB device controller driver interface */ /* * Copyright (c) 2016 Intel Corporation. * * SPDX-License-Identifier: Apache-2.0 */ /** * @file * @brief USB device controller APIs * * This file contains the USB device controller APIs. All device controller * drivers should implement the APIs described in this file. */ #pragma once #include #ifdef __cplusplus extern "C" { #endif /** * USB endpoint direction and number. */ #define USB_EP_DIR_MASK 0x80 #define USB_EP_DIR_IN 0x80 #define USB_EP_DIR_OUT 0x00 /** * USB Driver Status Codes */ enum usb_dc_status_code { USB_DC_ERROR, /* USB error reported by the controller */ USB_DC_RESET, /* USB reset */ /* USB connection established, hardware enumeration is completed */ USB_DC_CONNECTED, USB_DC_CONFIGURED, /* USB configuration done */ USB_DC_DISCONNECTED, /* USB connection lost */ USB_DC_SUSPEND, /* USB connection suspended by the HOST */ USB_DC_RESUME, /* USB connection resumed by the HOST */ USB_DC_INTERFACE, /* USB interface selected */ USB_DC_SET_HALT, /* Set Feature ENDPOINT_HALT received */ USB_DC_CLEAR_HALT, /* Clear Feature ENDPOINT_HALT received */ USB_DC_UNKNOWN /* Initial USB connection status */ }; /** * USB Endpoint Callback Status Codes */ enum usb_dc_ep_cb_status_code { USB_DC_EP_SETUP, /* SETUP received */ /* Out transaction on this EP, data is available for read */ USB_DC_EP_DATA_OUT, USB_DC_EP_DATA_IN, /* In transaction done on this EP */ }; /** * USB Endpoint type */ enum usb_dc_ep_type { USB_DC_EP_CONTROL = 0, /* Control type endpoint */ USB_DC_EP_ISOCHRONOUS, /* Isochronous type endpoint */ USB_DC_EP_BULK, /* Bulk type endpoint */ USB_DC_EP_INTERRUPT /* Interrupt type endpoint */ }; /** * USB Endpoint Configuration. */ struct usb_dc_ep_cfg_data { /** The number associated with the EP in the device * configuration structure * IN EP = 0x80 | \ * OUT EP = 0x00 | \ */ uint8_t ep_addr; uint16_t ep_mps; /** Endpoint max packet size */ enum usb_dc_ep_type ep_type; /** Endpoint type */ }; /** * Callback function signature for the USB Endpoint status */ typedef void (*usb_dc_ep_callback)(uint8_t ep, enum usb_dc_ep_cb_status_code cb_status); /** * Callback function signature for the device */ typedef void (*usb_dc_status_callback)(enum usb_dc_status_code cb_status, uint8_t *param); /** * @brief attach USB for device connection * * Function to attach USB for device connection. Upon success, the USB PLL * is enabled, and the USB device is now capable of transmitting and receiving * on the USB bus and of generating interrupts. * * @return 0 on success, negative errno code on fail. */ int usb_dc_attach(void); /** * @brief detach the USB device * * Function to detach the USB device. Upon success, the USB hardware PLL * is powered down and USB communication is disabled. * * @return 0 on success, negative errno code on fail. */ int usb_dc_detach(void); /** * @brief reset the USB device * * This function returns the USB device and firmware back to it's initial state. * N.B. the USB PLL is handled by the usb_detach function * * @return 0 on success, negative errno code on fail. */ int usb_dc_reset(void); /** * @brief set USB device address * * @param[in] addr device address * * @return 0 on success, negative errno code on fail. */ int usb_dc_set_address(const uint8_t addr); /** * @brief set USB device controller status callback * * Function to set USB device controller status callback. The registered * callback is used to report changes in the status of the device controller. * * @param[in] cb callback function * * @return 0 on success, negative errno code on fail. */ int usb_dc_set_status_callback(const usb_dc_status_callback cb); /** * @brief check endpoint capabilities * * Function to check capabilities of an endpoint. usb_dc_ep_cfg_data structure * provides the endpoint configuration parameters: endpoint address, * endpoint maximum packet size and endpoint type. * The driver should check endpoint capabilities and return 0 if the * endpoint configuration is possible. * * @param[in] cfg Endpoint config * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_check_cap(const struct usb_dc_ep_cfg_data *const cfg); /** * @brief configure endpoint * * Function to configure an endpoint. usb_dc_ep_cfg_data structure provides * the endpoint configuration parameters: endpoint address, endpoint maximum * packet size and endpoint type. * * @param[in] cfg Endpoint config * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_configure(const struct usb_dc_ep_cfg_data *const cfg); /** * @brief set stall condition for the selected endpoint * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_set_stall(const uint8_t ep); /** * @brief clear stall condition for the selected endpoint * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_clear_stall(const uint8_t ep); /** * @brief check if selected endpoint is stalled * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * @param[out] stalled Endpoint stall status * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_is_stalled(const uint8_t ep, uint8_t *const stalled); /** * @brief halt the selected endpoint * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_halt(const uint8_t ep); /** * @brief enable the selected endpoint * * Function to enable the selected endpoint. Upon success interrupts are * enabled for the corresponding endpoint and the endpoint is ready for * transmitting/receiving data. * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_enable(const uint8_t ep); /** * @brief disable the selected endpoint * * Function to disable the selected endpoint. Upon success interrupts are * disabled for the corresponding endpoint and the endpoint is no longer able * for transmitting/receiving data. * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_disable(const uint8_t ep); /** * @brief flush the selected endpoint * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_flush(const uint8_t ep); /** * @brief write data to the specified endpoint * * This function is called to write data to the specified endpoint. The supplied * usb_ep_callback function will be called when data is transmitted out. * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * @param[in] data pointer to data to write * @param[in] data_len length of data requested to write. This may * be zero for a zero length status packet. * @param[out] ret_bytes bytes scheduled for transmission. This value * may be NULL if the application expects all * bytes to be written * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_write(const uint8_t ep, const uint8_t *const data, const uint32_t data_len, uint32_t *const ret_bytes); /** * @brief Indicate if the write to an IN endpoint (using usb_dc_ep_write) would block * to wait until the endpoint has enoug space * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * * @return 0 when writable, 0 when not, negative errno code on fail. */ int usb_dc_ep_write_would_block(const uint8_t ep); /** * @brief read data from the specified endpoint * * This function is called by the Endpoint handler function, after an OUT * interrupt has been received for that EP. The application must only call this * function through the supplied usb_ep_callback function. This function clears * the ENDPOINT NAK, if all data in the endpoint FIFO has been read, * so as to accept more data from host. * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * @param[in] data pointer to data buffer to write to * @param[in] max_data_len max length of data to read * @param[out] read_bytes Number of bytes read. If data is NULL and * max_data_len is 0 the number of bytes * available for read should be returned. * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_read(const uint8_t ep, uint8_t *const data, const uint32_t max_data_len, uint32_t *const read_bytes); /** * @brief set callback function for the specified endpoint * * Function to set callback function for notification of data received and * available to application or transmit done on the selected endpoint, * NULL if callback not required by application code. * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * @param[in] cb callback function * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_set_callback(const uint8_t ep, const usb_dc_ep_callback cb); /** * @brief read data from the specified endpoint * * This is similar to usb_dc_ep_read, the difference being that, it doesn't * clear the endpoint NAKs so that the consumer is not bogged down by further * upcalls till he is done with the processing of the data. The caller should * reactivate ep by invoking usb_dc_ep_read_continue() do so. * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * @param[in] data pointer to data buffer to write to * @param[in] max_data_len max length of data to read * @param[out] read_bytes Number of bytes read. If data is NULL and * max_data_len is 0 the number of bytes * available for read should be returned. * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_read_wait(uint8_t ep, uint8_t *data, uint32_t max_data_len, uint32_t *read_bytes); /** * @brief Continue reading data from the endpoint * * Clear the endpoint NAK and enable the endpoint to accept more data * from the host. Usually called after usb_dc_ep_read_wait() when the consumer * is fine to accept more data. Thus these calls together acts as flow control * mechanism. * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * * @return 0 on success, negative errno code on fail. */ int usb_dc_ep_read_continue(uint8_t ep); /** * @brief Get endpoint max packet size * * @param[in] ep Endpoint address corresponding to the one * listed in the device configuration table * * @return enpoint max packet size (mps) */ int usb_dc_ep_mps(uint8_t ep); //Hack - fake interrupts by pollinfg void usb_dc_check_poll_for_interrupts(void); //Prepare for USB persist. You should reboot after this. int usb_dc_prepare_persist(void); void usb_dw_isr_handler(void); int usb_dc_ep_write_would_block(const uint8_t ep); #ifdef __cplusplus } #endif