.SMP_CASE: &SMP_CASE
  SDK: ESP32_IDF
  Test App: SSC_BLE
  auto test: 'Yes'
  category: Function
  test point 1: basic function
  initial condition: BLE_INIT_SMP
  test environment: SSC_T2_5
  execution time: 0
  module: BLUEDROID
  sub module: SMP
  version: v1 (2017-05-26)
  CI ready: 'Yes'
  level: Integration
  allow fail: ''

.just_work_pair: &just_work_pair
  LIST_MERGE:
    - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
      - ['P SSC1 C +BLECONN:GapConnect,OK', 'P SSC2 C +BLECONN:GapConnect,OK']
    - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
      - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']

.slave_passkey_entry_pair: &slave_passkey_entry_pair
  LIST_MERGE:
    - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
      - ['P SSC1 C +BLECONN:GapConnect,OK', 'P SSC2 C +BLECONN:GapConnect,OK']
    - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
      - ['P SSC2 C +BLESMP:PassKeyReq', 'P SSC1 A <key>:BLESMP:PassKeyNotify,(\d+)']
    - - "SSC SSC2 blesmp -K -r <dut1_bt_mac> -a 1 -k <key>"
      - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']

.master_passkey_entry_pair: &master_passkey_entry_pair
  LIST_MERGE:
    - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
      - ['P SSC1 C +BLECONN:GapConnect,OK', 'P SSC2 C +BLECONN:GapConnect,OK']
    - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
      - ['P SSC1 C +BLESMP:PassKeyReq', 'P SSC2 A <key>:BLESMP:PassKeyNotify,(\d+)']
    - - "SSC SSC1 blesmp -K -r <dut2_bt_mac> -a 1 -k <key>"
      - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']

.both_side_passkey_entry_pair: &both_side_passkey_entry_pair
  LIST_MERGE:
    - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
      - ['P SSC1 C +BLECONN:GapConnect,OK', 'P SSC2 C +BLECONN:GapConnect,OK']
    - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
      - ['P SSC[1,2] C +BLESMP:PassKeyReq']
    - - "SSC SSC[1,2] blesmp -K -r <dut[2,1]_bt_mac> -a 1 -k 123456"
      - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']

.numberic_comparision_pair: &numberic_comparision_pair
  LIST_MERGE:
    - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
      - ['P SSC1 C +BLECONN:GapConnect,OK', 'P SSC2 C +BLECONN:GapConnect,OK']
    - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
      - ['R SSC2 A <key>:BLESMP:NCReq,(\d+)', 'R SSC1 C NCReq P <key>']
    - - "SSC SSC[1-2] blesmp -C -r <dut[2,1]_bt_mac> -a 1"
      - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']

.check_connection: &check_connection
  LIST_MERGE:
    - - "SSC SSC1 gattc -D -z primaryService -p 0x10 -r <dut2_bt_mac>"
      - ["R SSC1 C +GATTC:Discover,OK"]

.disconnect: &disconnect
  LIST_MERGE:
    - - "SSC SSC1 bleconn -D -z all"
      - ['P SSC1 C +BLECONN:GapDisconnect,OK', 'P SSC2 C +BLECONN:GapDisconnect,OK']
    - - "SSC SSC2 bleadv -D -z start"
      - ['P SSC2 C +BLEADV:OK']

.connect: &connect
  LIST_MERGE:
    - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
      - ['P SSC1 C +BLECONN:GapConnect,OK', 'P SSC2 C +BLECONN:GapConnect,OK']

.config_just_work: &config_just_work
  LIST_MERGE:
    - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x00"
      - ['P SSC[1-2] C +BLESMP:OK']
    - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
      - ['P SSC[1-2] C +BLESMP:OK']

.config_master_passkey_entry: &config_master_passkey_entry
  LIST_MERGE:
    - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
      - ['P SSC[1-2] C +BLESMP:OK']
    - - "SSC SSC1 blesmp -S -z IOCAP -v 0x02"
      - ['P SSC1 C +BLESMP:OK']
    - - "SSC SSC2 blesmp -S -z IOCAP -v 0x04"
      - ['P SSC2 C +BLESMP:OK']

.config_slave_passkey_entry: &config_slave_passkey_entry
  LIST_MERGE:
    - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
      - ['P SSC[1-2] C +BLESMP:OK']
    - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
      - ['P SSC[1-2] C +BLESMP:OK']

.config_both_side_passkey_entry: &config_both_side_passkey_entry
  LIST_MERGE:
    - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x04"
      - ['P SSC[1-2] C +BLESMP:OK']
    - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x02"
      - ['P SSC[1-2] C +BLESMP:OK']

.config_numberic_comparision: &config_numberic_comparision
  LIST_MERGE:
    - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x0C"
      - ['P SSC[1-2] C +BLESMP:OK']
    - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x04"
      - ['P SSC[1-2] C +BLESMP:OK']

.config_bond_device: &config_bond_device
  LIST_MERGE:
    - - "SSC SSC2 blesmp -S -z AuthReqMode -v 0x01"
      - ['P SSC2 C +BLESMP:OK']
    - - "SSC SSC2 blesmp -S -z IOCAP -v 0x03"
      - ['P SSC2 C +BLESMP:OK']

test cases:
- ID: BLUEDROID_SMP_04001
  <<: *SMP_CASE
  test point 2: BLE SMP key test
  summary: BLE SMP set key size less than required for BLUEDROID
  allow fail: 1/2
  steps: |
    1. set key size 7
    2. set key size 6
    3. do just work pair
  expected result: |
    1. succeed
    2. LTK size is 7
    3. succeed
  cmd set:
  - ""
  - *config_numberic_comparision
  - - "SSC SSC1 blesmp -S -z KeySize -v 0x07"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z KeySize -v 0x06"
    - ['P SSC1 C +BLESMP:OK']
  - *connect
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['R SSC2 A <key>:BLESMP:NCReq,(\d+)', 'R SSC1 C NCReq P <key>']
  - - "SSC SSC[1-2] blesmp -C -r <dut[2,1]_bt_mac> -a 1"
    - ['P SSC[1-2] C +BLESMP:Key,LocalLTK,16 C +BLESMP:AuthComplete,Success,0']
- ID: BLUEDROID_SMP_04002
  <<: *SMP_CASE
  test point 2: BLE SMP key test
  summary: BLE SMP set key size greater than required for BLUEDROID
  allow fail: 1/2
  steps: |
    1. set key size 16
    2. set key size 17
    3. do just work pair
  expected result: |
    1. succeed
    2. LTK size is 17
    3. succeed
  cmd set:
  - ""
  - *config_numberic_comparision
  - - "SSC SSC1 blesmp -S -z KeySize -v 0x10"
    - ['P SSC1 C +BLESMP:OK']
  - - "SSC SSC1 blesmp -S -z KeySize -v 0x11"
    - ['P SSC1 C +BLESMP:OK']
  - *connect
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['R SSC2 A <key>:BLESMP:NCReq,(\d+)', 'R SSC1 C NCReq P <key>']
  - - "SSC SSC[1-2] blesmp -C -r <dut[2,1]_bt_mac> -a 1"
    - ['P SSC[1-2] C +BLESMP:Key,LocalLTK,16 C +BLESMP:AuthComplete,Success,0']
- ID: BLUEDROID_SMP_05001
  <<: *SMP_CASE
  test point 2: BLE SMP unsuccessful pair reply test
  summary: BLE SMP unsuccessful passkey entry test for BLUEDROID
  steps: |
    1. enter passkey entry phase
    2. entry incorrect passkey and accept
    3. enter passkey entry phase
    4. entry correct passkey and reject
    5. enter passkey entry phase
    6. send numberic comparision accept
    7. enter passkey entry phase
    8. send numberic comparision reject
  expected result: |
    1. succeed
    2. pair failed
    3. succeed
    4. pair failed
    5. succeed
    6. pair failed
    7. succeed
    8. pair failed
  cmd set:
  - ""
  - *config_slave_passkey_entry
  - - LOOP 2 5 "[1,0]" "['000001','<key>']"
    - ""
  - *connect
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC2 C +BLESMP:PassKeyReq', 'P SSC1 A <key>:BLESMP:PassKeyNotify,(\d+)']
  - - "SSC SSC2 blesmp -K -r <dut1_bt_mac> -a {%d} -k {%s}"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Fail']
  - *disconnect
  - - LOOP 2 5 "[1,0]"
    - ""
  - *connect
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC2 C +BLESMP:PassKeyReq', 'P SSC1 A <key>:BLESMP:PassKeyNotify,(\d+)']
  - - "SSC SSC[1-2] blesmp -C -r <dut[2,1]_bt_mac> -a {%d}"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Fail']
  - *disconnect
- ID: BLUEDROID_SMP_05002
  <<: *SMP_CASE
  test point 2: BLE SMP unsuccessful pair reply test
  summary: BLE SMP unsuccessful numberic comparision test for BLUEDROID
  steps: |
    1. enter numberic comparision phase
    2. entry passkey and accept
    3. enter numberic comparision phase
    4. send numberic comparision reject
  expected result: |
    1. succeed
    2. pair failed
    3. succeed
    4. pair failed
  cmd set:
  - ""
  - *config_numberic_comparision
  - - LOOP 2 6 "[1,0]"
    - ""
  - *connect
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['R SSC2 A <key>:BLESMP:NCReq,(\d+)', 'R SSC1 C NCReq P <key>']
  - - "SSC SSC2 blesmp -K -r <dut1_bt_mac> -a {%d} -k 000001"
    - []
  - - DELAY 10
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Fail']
  - *disconnect
  - - LOOP 2 5 "[1,0]" "[0,1]"
    - ""
  - *connect
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['R SSC2 A <key>:BLESMP:NCReq,(\d+)', 'R SSC1 C NCReq P <key>']
  - - "SSC SSC[1,2] blesmp -C -r <dut[2,1]_bt_mac> -a [{%d},{%d}]"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Fail']
  - *disconnect
- ID: BLUEDROID_SMP_06001
  <<: *SMP_CASE
  test environment: SSC_T1_4
  initial condition: BLE_DEINIT1
  test point 2: BLE SMP use API in abnormal state
  summary: BLE SMP use API when BLE not initialized, not enabled or not registered callback for BLUEDROID
  steps: |
    1. set security parameter
    2. send security response
    3. send passkey reply
    4. send confirm reply
    5. init BLE
    6. set security parameter
    7. send security response
    8. send passkey reply
    9. send confirm reply
    10. init BLE
    11. set security parameter
    12. send security response
    13. send passkey reply
    14. send confirm reply
  expected result: |
    1. failed
    2. failed
    3. failed
    4. failed
    5. succeed
    6. failed
    7. failed
    8. failed
    9. failed
    10. succeed
    11. failed
    12. failed
    13. failed
    14. failed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC1 C +BLESMP:ERROR']
  - - "SSC SSC1 blesmp -R -a 1 -r <dut1_bt_mac>"
    - ['P SSC1 C +BLESMP:ERROR']
  - - "SSC SSC1 blesmp -K -r <dut1_bt_mac> -a 1 -k 123456"
    - ['P SSC1 C +BLESMP:ERROR']
  - - "SSC SSC1 blesmp -C -r <dut1_bt_mac> -a 1"
    - ['P SSC1 C +BLESMP:ERROR']
  - - SSC SSC1 bt -D -z init
    - ['R SSC1 C +BT:']
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC1 C +BLESMP']
  - - "SSC SSC1 blesmp -R -a 1 -r <dut1_bt_mac>"
    - ['P SSC1 C +BLESMP']
  - - "SSC SSC1 blesmp -K -r <dut1_bt_mac> -a 1 -k 123456"
    - ['P SSC1 C +BLESMP']
  - - "SSC SSC1 blesmp -C -r <dut1_bt_mac> -a 1"
    - ['P SSC1 C +BLESMP']
  - - SSC SSC1 bt -D -z enable
    - ['R SSC1 C +BT:']
  - - "SSC SSC1 blesmp -S -z AuthReqMode -v 0x0C"
    - ['P SSC1 C +BLESMP']
  - - "SSC SSC1 blesmp -R -a 1 -r <dut1_bt_mac>"
    - ['P SSC1 C +BLESMP']
  - - "SSC SSC1 blesmp -K -r <dut1_bt_mac> -a 1 -k 123456"
    - ['P SSC1 C +BLESMP']
  - - "SSC SSC1 blesmp -C -r <dut1_bt_mac> -a 1"
    - ['P SSC1 C +BLESMP']
- ID: BLUEDROID_SMP_07002
  <<: *SMP_CASE
  test point 2: BLE SMP no bond test and repairing
  summary: BLE SMP just work pairing and reboot for BLUEDROID
  steps: |
    1. DUT1 and DUT2 SMP with just work pair
    2. DUT1 reboot
    3. DUT1 connect to DUT2
    4. DUT2 send auth request
  expected result: |
    1. succeed
    2. succeed
    3. succeed
    4. failed
  cmd set:
  - ""
  - *config_just_work
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLECONN:GapConnect,OK', 'P SSC2 C +BLECONN:GapConnect,OK']
  - - "SSC SSC1 blesmp -E -r <dut2_bt_mac> -z Enc"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
  - - "SSC SSC1 reboot"
    - ['P SSC2 C +BLECONN:GapDisconnect,OK']
  - - "SSC SSC1 ble -R"
    - ['R SSC1 C +BLE:']
  - - "SSC SSC2 bleadv -D -z start"
    - ['R SSC2 C +BLEADV:OK']
  - *slave_passkey_entry_pair
- ID: BLUEDROID_SMP_07005
  <<: *SMP_CASE
  test point 2: BLE SMP no bond test and repairing
  summary: BLE SMP initiator with master passkey entry and reconnect for BLUEDROID
  steps: |
    1. DUT1 and DUT2 SMP with master passkey entry
    2. DUT1 disconnect
    3. DUT1 connect to DUT2
    4. DUT2 send auth request
  expected result: |
    1. succeed
    2. succeed
    3. connect succeed
    4. succeed
  cmd set:
  - ""
  - *config_master_passkey_entry
  - *master_passkey_entry_pair
  - *disconnect
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLECONN:GapConnect,OK', 'P SSC2 C +BLECONN:GapConnect']
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
- ID: BLUEDROID_SMP_07006
  <<: *SMP_CASE
  test point 2: BLE SMP no bond test and repairing
  summary: BLE SMP initiator with master passkey entry and reboot for BLUEDROID
  steps: |
    1. DUT1 and DUT2 SMP bond with lagecy pairing
    2. DUT1 reboot
    3. DUT1 connect to DUT2
    4. DUT2 send auth requst
  expected result: |
    1. succeed
    2. succeed
    3. connect succeed
    4. fail
  cmd set:
  - ""
  - *config_master_passkey_entry
  - *master_passkey_entry_pair
  - - "SSC SSC1 reboot"
    - ['P SSC2 C +BLECONN:GapDisconnect,OK']
  - - "SSC SSC1 ble -R"
    - ['R SSC1 C +BLE:']
  - - "SSC SSC2 bleadv -D -z start"
    - ['R SSC2 C +BLEADV:OK']
  - *numberic_comparision_pair
- ID: BLUEDROID_SMP_07007
  <<: *SMP_CASE
  test point 2: BLE SMP no bond test and repairing
  summary: BLE SMP initiator numberic comparision and reconnect for BLUEDROID
  steps: |
    1. DUT1 and DUT2 SMP with numberic comparision
    2. DUT1 disconnect
    3. DUT1 connect to DUT2
    4. DUT2 send auth requst
  expected result: |
    1. succeed
    2. succeed
    3. connect succeed
    4. succeed
  cmd set:
  - ""
  - *config_numberic_comparision
  - *numberic_comparision_pair
  - *disconnect
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
    - ['P SSC1 C +BLECONN:GapConnect,OK', 'P SSC2 C +BLECONN:GapConnect']
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC[1-2] C +BLESMP:AuthComplete,Success,0']
- ID: BLUEDROID_SMP_07008
  <<: *SMP_CASE
  test point 2: BLE SMP no bond test and repairing
  summary: BLE SMP initiator numberic comparision and reboot for BLUEDROID
  steps: |
    1. DUT1 and DUT2 SMP with numberic comparision
    2. DUT1 disconnect
    3. DUT1 and DUT2 reboot
    4. DUT2 send auth requst
  expected result: |
    1. succeed
    2. succeed
    3. connect succeed
    4. failed
  cmd set:
  - ""
  - *config_numberic_comparision
  - *numberic_comparision_pair
  - - "SSC SSC1 reboot"
    - ['P SSC2 C +BLECONN:GapDisconnect,OK']
  - - "SSC SSC1 ble -R"
    - ['R SSC1 C +BLE:']
  - - "SSC SSC2 bleadv -D -z start"
    - ['R SSC2 C +BLEADV:OK']
  - *numberic_comparision_pair
- ID: BLUEDROID_SMP_08001
  <<: *SMP_CASE
  test point 2: BLE SMP bond item management test
  summary: BLE SMP get bond list and number without bond device for BLUEDROID
  steps: |
    1. DUT1 get bond list
    2. DUT1 get bond number
  expected result: |
    1. succeed
    2. succeed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -B -z getlist -n 1"
    - ['P SSC1 C +BLESMP:GetBondList,OK,0']
  - - "SSC SSC1 blesmp -B -z getnum"
    - ['P SSC1 C +BLESMP:GetBondNum,0']
- ID: BLUEDROID_SMP_08002
  <<: *SMP_CASE
  test point 2: BLE SMP bond item management test
  summary: BLE SMP remove bond after connected
  steps: |
   1. DUT2 set AuthReqMode and RspKey
   2. pairing
   3. remove bond
  expected result: |
   1. Succeed
   2. Succeed
   3. Succeed
  cmd set:
  - ""
  - *config_bond_device
  - - "SSC SSC2 bleadv -D -z start"
    - ['R SSC2 C +BLEADV:Start,OK']
  - *connect
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC1 C +BLESMP:AuthComplete,Success,0','P SSC2 C +BLESMP:AuthComplete,Success,0']
  - - "SSC SSC1 blesmp -B -z getnum"
    - ['P SSC1 C +BLESMP:GetBondNum,1']
  - - "SSC SSC1 blesmp -B -z remove -r <dut2_bt_mac>"
    - ['P SSC1 RE "\+BLESMP:RemoveBond,Success,%%s"%%(<dut2_bt_mac>)']
- ID: BLUEDROID_SMP_08003
  <<: *SMP_CASE
  test point 2: BLE SMP bond item management test
  summary: BLE SMP get bond list and number when pairing and after reboot for BLUEDROID
  steps: |
   1. all slaves set AuthReqMode and RspKey
   2. do pairing
   3. master and slave get bond list and num
   4. reboot
   5. master and slave get bond list and num
   6. slave remove bond device
  expected result: |
   1. Succeed
   2. Succeed
   3. Succeed
   4. succeed
   5. succeed
   6. succeed
  test environment: SSC_T5_1
  initial condition: BLE_INIT_SMP5
  allow fail: 3/5
  cmd set:
  - ""
  - - "SSC SSC[2-5] blesmp -S -z AuthReqMode -v 0x01"
    - ['P SSC[2-5] C +BLESMP:OK']
  - - "SSC SSC[2-5] blesmp -S -z IOCAP -v 0x03"
    - ['P SSC[2-5] C +BLESMP:OK']
  - - "SSC SSC[2-5] blesmp -S -z RspKey -v 0x03"
    - ['P SSC[2-5] C +BLESMP:OK']
  - - LOOP 4 4 "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]"
    - ""
  - - "SSC SSC{%d} bleadv -D -z start"
    - ['R SSC{%d} C +BLEADV:Start,OK']
  - - "SSC SSC1 bleconn -C -p 0x10 -a <dut{%d}_bt_mac>"
    - ['P SSC1 C +BLECONN:GapConnect,OK', 'P SSC{%d} C +BLECONN:GapConnect']
  - - "SSC SSC{%d} blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC1 C +BLESMP:SecReq']
  - - "SSC SSC1 blesmp -R -a 1 -r <dut{%d}_bt_mac>"
    - ['P SSC1 C +BLESMP:AuthComplete,Success,0','P SSC{%d} C +BLESMP:AuthComplete,Success,0']
  - - "SSC SSC1 blesmp -B -z getlist -n 4"
    - ['P SSC1 C +BLESMP:GetBondList,OK,4']
  - - "SSC SSC1 blesmp -B -z getnum"
    - ['P SSC1 C +BLESMP:GetBondNum,4']
  - - "SSC SSC2 blesmp -B -z getnum"
    - ['P SSC2 C +BLESMP:GetBondNum,1']
  - - "SSC SSC[1-2] reboot"
    - ['R SSC[1-2] C !!!ready!!!']
  - - "SSC SSC[1-2] ble -R"
    - ["R SSC[1-2] C +BLE:OK"]
  - - "SSC SSC1 blesmp -B -z getnum"
    - ['P SSC1 C +BLESMP:GetBondNum,4']
  - - "SSC SSC2 blesmp -B -z getnum"
    - ['P SSC2 C +BLESMP:GetBondNum,1']
  - - "SSC SSC2 blesmp -B -z remove -r <dut1_bt_mac>"
    - ['P SSC2 RE "\+BLESMP:RemoveBond,Success,%%s"%%(<dut1_bt_mac>)']
- ID: BLUEDROID_SMP_08004
  <<: *SMP_CASE
  test point 2: BLE SMP bond item management test
  summary: BLE SMP remove bond which not bond for BLUEDROID
  steps: |
   1. DUT1 remove bond
  expected result: |
   1. failed
  cmd set:
  - ""
  - - "SSC SSC1 blesmp -B -z remove -r <dut2_bt_mac>"
    - ['P SSC1 C +BLESMP:RemoveBond,Fail']
- ID: BLUEDROID_SMP_08005
  <<: *SMP_CASE
  test point 2: BLE SMP remove bond
  summary: BLE SMP bond 15/16 devices and get list
  steps: |
   1. DUT2 set AuthReqMode and RspKey
   2. DUT2 set static random address
   3. DUT1 and DUT2 do pairing
   4. loop step 2 and step3 16 times
   5. get bond list and bond num
   6. DUT2 set static random address
   7. DUT1 and DUT2 do pairing
   8. get bond list and bond num
  expected result: |
   1. Succeed
   2. Succeed
   3. Succeed
   4. succeed
   5. succeed
   6. succeed
   7. succeed
   8. succeed
  cmd set:
  - ""
  - - "SSC SSC[1-2] blesmp -S -z AuthReqMode -v 0x01"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z IOCAP -v 0x03"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - "SSC SSC[1-2] blesmp -S -z RspKey -v 0x03"
    - ['P SSC[1-2] C +BLESMP:OK']
  - - LOOP 15 7 "range(0,15)" "range(0,15)" "range(0,15)"
    - ""
  - - "SSC SSC2 bleadv -D -z stop"
    - ['R SSC2 C +BLEADV:Stop,OK']
  - - "SSC SSC2 ble -S -z randAddr -a c0:9b:0e:36:6d:7{%x} -r 1"
    - ["R SSC2 C +BLECONN:SetRandAddr,OK"]
  - - "SSC SSC2 bleadv -D -z start -o 1"
    - ['R SSC2 C +BLEADV:Start,OK']
  - - "SSC SSC1 bleconn -C -p 0x10 -a c0:9b:0e:36:6d:7{%x} -r 1"
    - ['P SSC1 C +BLECONN:GapConnect,OK', 'P SSC2 C +BLECONN:GapConnect']
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC1 C +BLESMP:SecReq']
  - - "SSC SSC1 blesmp -R -a 1 -r c0:9b:0e:36:6d:7{%x}"
    - ['P SSC1 C +BLESMP:AuthComplete,Success,0','P SSC2 C +BLESMP:AuthComplete,Success,0']
  - - "SSC SSC1 bleconn -D -z all"
    - ['P SSC1 C +BLE:CLOSE', 'P SSC2 C +BLECONN:GapDisconnect,OK']
  - - "SSC SSC1 blesmp -B -z getlist -n 16"
    - ['P SSC1 C +BLESMP:GetBondList,OK,15']
  - - "SSC SSC2 ble -S -z randAddr -a c1:0a:d3:25:7a:cf -r 1"
    - ["R SSC2 C +BLECONN:SetRandAddr,OK"]
  - - "SSC SSC2 bleadv -D -z stop"
    - ['R SSC2 C +BLEADV:Stop,OK']
  - - "SSC SSC2 bleadv -D -z start -o 1"
    - ['R SSC2 C +BLEADV:Start,OK']
  - - "SSC SSC1 bleconn -C -p 0x10 -a c1:0a:d3:25:7a:cf -r 1"
    - ['P SSC1 C +BLECONN:GapConnect,OK', 'P SSC2 C +BLECONN:GapConnect']
  - - "SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc"
    - ['P SSC1 C +BLESMP:SecReq']
  - - "SSC SSC1 blesmp -R -a 1 -r c1:0a:d3:25:7a:cf"
    - ['P SSC1 C +BLESMP:AuthComplete,Success,0','P SSC2 C +BLESMP:AuthComplete,Success,0']
  - - "SSC SSC1 blesmp -B -z getlist -n 16"
    - ['P SSC1 C +BLESMP:GetBondList,OK,15']