menu "Common ESP-related" config ESP_TIMER_PROFILING bool "Enable esp_timer profiling features" default n help If enabled, esp_timer_dump will dump information such as number of times the timer was started, number of times the timer has triggered, and the total time it took for the callback to run. This option has some effect on timer performance and the amount of memory used for timer storage, and should only be used for debugging/testing purposes. config ESP_ERR_TO_NAME_LOOKUP bool "Enable lookup of error code strings" default "y" help Functions esp_err_to_name() and esp_err_to_name_r() return string representations of error codes from a pre-generated lookup table. This option can be used to turn off the use of the look-up table in order to save memory but this comes at the price of sacrificing distinguishable (meaningful) output string representations. config ESP_SYSTEM_EVENT_QUEUE_SIZE int "System event queue size" default 32 help Config system event queue size in different application. config ESP_SYSTEM_EVENT_TASK_STACK_SIZE int "Event loop task stack size" default 2304 help Config system event task stack size in different application. config ESP_MAIN_TASK_STACK_SIZE int "Main task stack size" default 3584 help Configure the "main task" stack size. This is the stack of the task which calls app_main(). If app_main() returns then this task is deleted and its stack memory is freed. config ESP_IPC_TASK_STACK_SIZE int "Inter-Processor Call (IPC) task stack size" default 1024 range 512 65536 if !ESP32_APPTRACE_ENABLE range 2048 65536 if ESP32_APPTRACE_ENABLE help Configure the IPC tasks stack size. One IPC task runs on each core (in dual core mode), and allows for cross-core function calls. See IPC documentation for more details. The default stack size should be enough for most common use cases. It can be shrunk if you are sure that you do not use any custom IPC functionality. config ESP_TIMER_TASK_STACK_SIZE int "High-resolution timer task stack size" default 3584 range 2048 65536 help Configure the stack size of esp_timer/ets_timer task. This task is used to dispatch callbacks of timers created using ets_timer and esp_timer APIs. If you are seing stack overflow errors in timer task, increase this value. Note that this is not the same as FreeRTOS timer task. To configure FreeRTOS timer task size, see "FreeRTOS timer task stack size" option in "FreeRTOS" menu. choice ESP_CONSOLE_UART prompt "UART for console output" default ESP_CONSOLE_UART_DEFAULT help Select whether to use UART for console output (through stdout and stderr). - Default is to use UART0 on pins GPIO1(TX) and GPIO3(RX). - If "Custom" is selected, UART0 or UART1 can be chosen, and any pins can be selected. - If "None" is selected, there will be no console output on any UART, except for initial output from ROM bootloader. This output can be further suppressed by bootstrapping GPIO13 pin to low logic level. config ESP_CONSOLE_UART_DEFAULT bool "Default: UART0, TX=GPIO1, RX=GPIO3" config ESP_CONSOLE_UART_CUSTOM bool "Custom" config ESP_CONSOLE_UART_NONE bool "None" endchoice choice ESP_CONSOLE_UART_NUM prompt "UART peripheral to use for console output (0-1)" depends on ESP_CONSOLE_UART_CUSTOM default ESP_CONSOLE_UART_CUSTOM_NUM_0 help Due of a ROM bug, UART2 is not supported for console output via ets_printf. config ESP_CONSOLE_UART_CUSTOM_NUM_0 bool "UART0" config ESP_CONSOLE_UART_CUSTOM_NUM_1 bool "UART1" endchoice config ESP_CONSOLE_UART_NUM int default 0 if ESP_CONSOLE_UART_DEFAULT || ESP_CONSOLE_UART_NONE default 0 if ESP_CONSOLE_UART_CUSTOM_NUM_0 default 1 if ESP_CONSOLE_UART_CUSTOM_NUM_1 config ESP_CONSOLE_UART_TX_GPIO int "UART TX on GPIO#" depends on ESP_CONSOLE_UART_CUSTOM range 0 33 default 19 config ESP_CONSOLE_UART_RX_GPIO int "UART RX on GPIO#" depends on ESP_CONSOLE_UART_CUSTOM range 0 39 default 21 config ESP_CONSOLE_UART_BAUDRATE int "UART console baud rate" depends on !ESP_CONSOLE_UART_NONE default 115200 range 1200 4000000 config ESP_INT_WDT bool "Interrupt watchdog" default y help This watchdog timer can detect if the FreeRTOS tick interrupt has not been called for a certain time, either because a task turned off interrupts and did not turn them on for a long time, or because an interrupt handler did not return. It will try to invoke the panic handler first and failing that reset the SoC. config ESP_INT_WDT_TIMEOUT_MS int "Interrupt watchdog timeout (ms)" depends on ESP_INT_WDT default 300 if !ESP32_SPIRAM_SUPPORT default 800 if ESP32_SPIRAM_SUPPORT range 10 10000 help The timeout of the watchdog, in miliseconds. Make this higher than the FreeRTOS tick rate. config ESP_INT_WDT_CHECK_CPU1 bool "Also watch CPU1 tick interrupt" depends on ESP_INT_WDT && !FREERTOS_UNICORE default y help Also detect if interrupts on CPU 1 are disabled for too long. config ESP_TASK_WDT bool "Initialize Task Watchdog Timer on startup" default y help The Task Watchdog Timer can be used to make sure individual tasks are still running. Enabling this option will cause the Task Watchdog Timer to be initialized automatically at startup. The Task Watchdog timer can be initialized after startup as well (see Task Watchdog Timer API Reference) config ESP_TASK_WDT_PANIC bool "Invoke panic handler on Task Watchdog timeout" depends on ESP_TASK_WDT default n help If this option is enabled, the Task Watchdog Timer will be configured to trigger the panic handler when it times out. This can also be configured at run time (see Task Watchdog Timer API Reference) config ESP_TASK_WDT_TIMEOUT_S int "Task Watchdog timeout period (seconds)" depends on ESP_TASK_WDT range 1 60 default 5 help Timeout period configuration for the Task Watchdog Timer in seconds. This is also configurable at run time (see Task Watchdog Timer API Reference) config ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 bool "Watch CPU0 Idle Task" depends on ESP_TASK_WDT default y help If this option is enabled, the Task Watchdog Timer will watch the CPU0 Idle Task. Having the Task Watchdog watch the Idle Task allows for detection of CPU starvation as the Idle Task not being called is usually a symptom of CPU starvation. Starvation of the Idle Task is detrimental as FreeRTOS household tasks depend on the Idle Task getting some runtime every now and then. config ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1 bool "Watch CPU1 Idle Task" depends on ESP_TASK_WDT && !FREERTOS_UNICORE default y help If this option is enabled, the Task Wtachdog Timer will wach the CPU1 Idle Task. endmenu # Common ESP-related