// Copyright 2017-2018 Espressif Systems (Shanghai) PTE LTD // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. #pragma once #ifdef __cplusplus extern "C" { #endif #include #include "esp_err.h" #include "esp_log.h" #include "sdkconfig.h" #if CONFIG_IDF_TARGET_ESP32 #include "esp32/esp_efuse.h" #elif CONFIG_IDF_TARGET_ESP32S2BETA #include "esp32s2beta/esp_efuse.h" #endif #define ESP_ERR_EFUSE 0x1600 /*!< Base error code for efuse api. */ #define ESP_OK_EFUSE_CNT (ESP_ERR_EFUSE + 0x01) /*!< OK the required number of bits is set. */ #define ESP_ERR_EFUSE_CNT_IS_FULL (ESP_ERR_EFUSE + 0x02) /*!< Error field is full. */ #define ESP_ERR_EFUSE_REPEATED_PROG (ESP_ERR_EFUSE + 0x03) /*!< Error repeated programming of programmed bits is strictly forbidden. */ #define ESP_ERR_CODING (ESP_ERR_EFUSE + 0x04) /*!< Error while a encoding operation. */ /** * @brief Structure eFuse field */ typedef struct { esp_efuse_block_t efuse_block: 8; /**< Block of eFuse */ uint8_t bit_start; /**< Start bit [0..255] */ uint16_t bit_count; /**< Length of bit field [1..-]*/ } esp_efuse_desc_t; /** * @brief Reads bits from EFUSE field and writes it into an array. * * The number of read bits will be limited to the minimum value * from the description of the bits in "field" structure or "dst_size_bits" required size. * Use "esp_efuse_get_field_size()" function to determine the length of the field. * @param[in] field A pointer to the structure describing the fields of efuse. * @param[out] dst A pointer to array that will contain the result of reading. * @param[in] dst_size_bits The number of bits required to read. * If the requested number of bits is greater than the field, * the number will be limited to the field size. * * @return * - ESP_OK: The operation was successfully completed. * - ESP_ERR_INVALID_ARG: Error in the passed arguments. */ esp_err_t esp_efuse_read_field_blob(const esp_efuse_desc_t* field[], void* dst, size_t dst_size_bits); /** * @brief Reads bits from EFUSE field and returns number of bits programmed as "1". * * If the bits are set not sequentially, they will still be counted. * @param[in] field A pointer to the structure describing the fields of efuse. * @param[out] out_cnt A pointer that will contain the number of programmed as "1" bits. * * @return * - ESP_OK: The operation was successfully completed. * - ESP_ERR_INVALID_ARG: Error in the passed arguments. */ esp_err_t esp_efuse_read_field_cnt(const esp_efuse_desc_t* field[], size_t* out_cnt); /** * @brief Writes array to EFUSE field. * * The number of write bits will be limited to the minimum value * from the description of the bits in "field" structure or "src_size_bits" required size. * Use "esp_efuse_get_field_size()" function to determine the length of the field. * After the function is completed, the writing registers are cleared. * @param[in] field A pointer to the structure describing the fields of efuse. * @param[in] src A pointer to array that contains the data for writing. * @param[in] src_size_bits The number of bits required to write. * * @return * - ESP_OK: The operation was successfully completed. * - ESP_ERR_INVALID_ARG: Error in the passed arguments. * - ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden. * - ESP_ERR_CODING: Error range of data does not match the coding scheme. */ esp_err_t esp_efuse_write_field_blob(const esp_efuse_desc_t* field[], const void* src, size_t src_size_bits); /** * @brief Writes a required count of bits as "1" to EFUSE field. * * If there are no free bits in the field to set the required number of bits to "1", * ESP_ERR_EFUSE_CNT_IS_FULL error is returned, the field will not be partially recorded. * After the function is completed, the writing registers are cleared. * @param[in] field A pointer to the structure describing the fields of efuse. * @param[in] cnt Required number of programmed as "1" bits. * * @return * - ESP_OK: The operation was successfully completed. * - ESP_ERR_INVALID_ARG: Error in the passed arguments. * - ESP_ERR_EFUSE_CNT_IS_FULL: Not all requested cnt bits is set. */ esp_err_t esp_efuse_write_field_cnt(const esp_efuse_desc_t* field[], size_t cnt); /** * @brief Sets a write protection for the whole block. * * After that, it is impossible to write to this block. * The write protection does not apply to block 0. * @param[in] blk Block number of eFuse. (EFUSE_BLK1, EFUSE_BLK2 and EFUSE_BLK3) * * @return * - ESP_OK: The operation was successfully completed. * - ESP_ERR_INVALID_ARG: Error in the passed arguments. * - ESP_ERR_EFUSE_CNT_IS_FULL: Not all requested cnt bits is set. * - ESP_ERR_NOT_SUPPORTED: The block does not support this command. */ esp_err_t esp_efuse_set_write_protect(esp_efuse_block_t blk); /** * @brief Sets a read protection for the whole block. * * After that, it is impossible to read from this block. * The read protection does not apply to block 0. * @param[in] blk Block number of eFuse. (EFUSE_BLK1, EFUSE_BLK2 and EFUSE_BLK3) * * @return * - ESP_OK: The operation was successfully completed. * - ESP_ERR_INVALID_ARG: Error in the passed arguments. * - ESP_ERR_EFUSE_CNT_IS_FULL: Not all requested cnt bits is set. * - ESP_ERR_NOT_SUPPORTED: The block does not support this command. */ esp_err_t esp_efuse_set_read_protect(esp_efuse_block_t blk); /** * @brief Returns the number of bits used by field. * * @param[in] field A pointer to the structure describing the fields of efuse. * * @return Returns the number of bits used by field. */ int esp_efuse_get_field_size(const esp_efuse_desc_t* field[]); /** * @brief Returns value of efuse register. * * This is a thread-safe implementation. * Example: EFUSE_BLK2_RDATA3_REG where (blk=2, num_reg=3) * @param[in] blk Block number of eFuse. * @param[in] num_reg The register number in the block. * * @return Value of register */ uint32_t esp_efuse_read_reg(esp_efuse_block_t blk, unsigned int num_reg); /** * @brief Write value to efuse register. * * Apply a coding scheme if necessary. * This is a thread-safe implementation. * Example: EFUSE_BLK3_WDATA0_REG where (blk=3, num_reg=0) * @param[in] blk Block number of eFuse. * @param[in] num_reg The register number in the block. * @param[in] val Value to write. * * @return * - ESP_OK: The operation was successfully completed. * - ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden. */ esp_err_t esp_efuse_write_reg(esp_efuse_block_t blk, unsigned int num_reg, uint32_t val); /** * @brief Return efuse coding scheme for blocks. * * Note: The coding scheme is applicable only to 1, 2 and 3 blocks. For 0 block, the coding scheme is always ``NONE``. * * @param[in] blk Block number of eFuse. * @return Return efuse coding scheme for blocks */ esp_efuse_coding_scheme_t esp_efuse_get_coding_scheme(esp_efuse_block_t blk); /** * @brief Read key to efuse block starting at the offset and the required size. * * @param[in] blk Block number of eFuse. * @param[in] dst_key A pointer to array that will contain the result of reading. * @param[in] offset_in_bits Start bit in block. * @param[in] size_bits The number of bits required to read. * * @return * - ESP_OK: The operation was successfully completed. * - ESP_ERR_INVALID_ARG: Error in the passed arguments. * - ESP_ERR_CODING: Error range of data does not match the coding scheme. */ esp_err_t esp_efuse_read_block(esp_efuse_block_t blk, void* dst_key, size_t offset_in_bits, size_t size_bits); /** * @brief Write key to efuse block starting at the offset and the required size. * * @param[in] blk Block number of eFuse. * @param[in] src_key A pointer to array that contains the key for writing. * @param[in] offset_in_bits Start bit in block. * @param[in] size_bits The number of bits required to write. * * @return * - ESP_OK: The operation was successfully completed. * - ESP_ERR_INVALID_ARG: Error in the passed arguments. * - ESP_ERR_CODING: Error range of data does not match the coding scheme. * - ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits */ esp_err_t esp_efuse_write_block(esp_efuse_block_t blk, const void* src_key, size_t offset_in_bits, size_t size_bits); /** * @brief Returns chip version from efuse * * @return chip version */ uint8_t esp_efuse_get_chip_ver(void); /** * @brief Returns chip package from efuse * * @return chip package */ uint32_t esp_efuse_get_pkg_ver(void); /* @brief Permanently update values written to the efuse write registers * * After updating EFUSE_BLKx_WDATAx_REG registers with new values to * write, call this function to permanently write them to efuse. * * @note Setting bits in efuse is permanent, they cannot be unset. * * @note Due to this restriction you don't need to copy values to * Efuse write registers from the matching read registers, bits which * are set in the read register but unset in the matching write * register will be unchanged when new values are burned. * * @note This function is not threadsafe, if calling code updates * efuse values from multiple tasks then this is caller's * responsibility to serialise. * * After burning new efuses, the read registers are updated to match * the new efuse values. */ void esp_efuse_burn_new_values(void); /* @brief Reset efuse write registers * * Efuse write registers are written to zero, to negate * any changes that have been staged here. * * @note This function is not threadsafe, if calling code updates * efuse values from multiple tasks then this is caller's * responsibility to serialise. */ void esp_efuse_reset(void); /* @brief Disable BASIC ROM Console via efuse * * By default, if booting from flash fails the ESP32 will boot a * BASIC console in ROM. * * Call this function (from bootloader or app) to permanently * disable the console on this chip. */ void esp_efuse_disable_basic_rom_console(void); /* @brief Write random data to efuse key block write registers * * @note Caller is responsible for ensuring efuse * block is empty and not write protected, before calling. * * @note Behaviour depends on coding scheme: a 256-bit key is * generated and written for Coding Scheme "None", a 192-bit key * is generated, extended to 256-bits by the Coding Scheme, * and then writtten for 3/4 Coding Scheme. * * @note This function does not burn the new values, caller should * call esp_efuse_burn_new_values() when ready to do this. * * @param blk_wdata0_reg Address of the first data write register * in the block */ void esp_efuse_write_random_key(uint32_t blk_wdata0_reg); /* @brief Return secure_version from efuse field. * @return Secure version from efuse field */ uint32_t esp_efuse_read_secure_version(void); /* @brief Check secure_version from app and secure_version and from efuse field. * * @param secure_version Secure version from app. * @return * - True: If version of app is equal or more then secure_version from efuse. */ bool esp_efuse_check_secure_version(uint32_t secure_version); /* @brief Write efuse field by secure_version value. * * Update the secure_version value is available if the coding scheme is None. * Note: Do not use this function in your applications. This function is called as part of the other API. * * @param[in] secure_version Secure version from app. * @return * - ESP_OK: Successful. * - ESP_FAIL: secure version of app cannot be set to efuse field. * - ESP_ERR_NOT_SUPPORTED: Anti rollback is not supported with the 3/4 and Repeat coding scheme. */ esp_err_t esp_efuse_update_secure_version(uint32_t secure_version); /* @brief Initializes variables: offset and size to simulate the work of an eFuse. * * Note: To simulate the work of an eFuse need to set CONFIG_BOOTLOADER_EFUSE_SECURE_VERSION_EMULATE option * and to add in the partition.csv file a line `efuse_em, data, efuse, , 0x2000,`. * * @param[in] offset The starting address of the partition where the eFuse data will be located. * @param[in] size The size of the partition. */ void esp_efuse_init(uint32_t offset, uint32_t size); /* @brief Set the batch mode of writing fields. * * This mode allows you to write the fields in the batch mode. * If this mode is enabled, esp_efuse_batch_write_commit() must be called * to actually burn any written efuses. * In this mode, reading efuse is not possible. * This mode should be used when burning several efuses at one time. * * \code{c} * // Example of using the batch writing mode. * * // set the batch writing mode * esp_efuse_batch_write_begin(); * * // use any writing functions as usual * esp_efuse_write_field_blob(ESP_EFUSE_...); * esp_efuse_write_field_cnt(ESP_EFUSE_...); * esp_efuse_set_write_protect(EFUSE_BLKx); * esp_efuse_write_reg(EFUSE_BLKx, ...); * esp_efuse_write_block(EFUSE_BLKx, ...); * ... * * // Write all of these fields to the efuse registers * esp_efuse_batch_write_commit(); * * \endcode * * @return * - ESP_OK: Successful. */ esp_err_t esp_efuse_batch_write_begin(void); /* @brief Reset the batch mode of writing fields. * * It will reset the batch writing mode and any written changes. * * @return * - ESP_OK: Successful. * - ESP_ERR_INVALID_STATE: Tha batch mode was not set. */ esp_err_t esp_efuse_batch_write_cancel(void); /* @brief Writes all prepared data for the batch mode. * * Must be called to ensure changes are written to the efuse registers. * After this the batch writing mode will be reset. * * @return * - ESP_OK: Successful. * - ESP_ERR_INVALID_STATE: The deferred writing mode was not set. */ esp_err_t esp_efuse_batch_write_commit(void); #ifdef __cplusplus } #endif