menu "Example Configuration"

    choice EXAMPLE_PHY_MODEL
        prompt "Ethernet PHY Device"
        default EXAMPLE_PHY_IP101
        help
            Select the PHY driver to use for the example.
        config EXAMPLE_PHY_IP101
            bool "IP101"
            help
                IP101 is a single port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver.
                Goto http://www.icplus.com.tw/pp-IP101G.html for more information about it.
        config EXAMPLE_PHY_TLK110
            bool "TLK110"
            help
                TLK110 is an Industrial 10/100Mbps Ethernet Physical Layer Transceiver.
                Goto http://www.ti.com/product/TLK110 for information about it.
        config EXAMPLE_PHY_LAN8720
            bool "LAN8720"
            help
                LAN8720 is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support.
                Goto https://www.microchip.com/LAN8720A for more information about it.
    endchoice

    config EXAMPLE_PHY_ADDRESS
        int "Ethernet PHY Address"
        default 1
        range 0 31
        help
            PHY Address of your PHY device. It depends on your schematic design.

    choice EXAMPLE_PHY_CLOCK_MODE
        prompt "Ethernet RMII Clock Mode"
        default EXAMPLE_PHY_CLOCK_GPIO0_IN
        help
            Select external (input on GPIO0) or internal (output on GPIO0, GPIO16 or GPIO17) RMII clock.
        config EXAMPLE_PHY_CLOCK_GPIO0_IN
            bool "GPIO0 Input"
            help
                Input of 50MHz RMII clock on GPIO0.
        config EXAMPLE_PHY_CLOCK_GPIO0_OUT
            bool "GPIO0 Output"
            help
                Output the internal 50MHz RMII clock on GPIO0.
        config EXAMPLE_PHY_CLOCK_GPIO16_OUT
            bool "GPIO16 Output"
            help
                Output the internal 50MHz RMII clock on GPIO16.
        config EXAMPLE_PHY_CLOCK_GPIO17_OUT
            bool "GPIO17 Output (inverted)"
            help
                Output the internal 50MHz RMII clock on GPIO17 (inverted signal).
    endchoice

    config EXAMPLE_PHY_CLOCK_MODE
        int
        default 0 if EXAMPLE_PHY_CLOCK_GPIO0_IN
        default 1 if EXAMPLE_PHY_CLOCK_GPIO0_OUT
        default 2 if EXAMPLE_PHY_CLOCK_GPIO16_OUT
        default 3 if EXAMPLE_PHY_CLOCK_GPIO17_OUT

    config EXAMPLE_PHY_USE_POWER_PIN
        bool "Use PHY Power (enable / disable) pin"
        default y
        help
            Use a GPIO "power pin" to power the PHY on/off during operation.
            When using GPIO0 to input RMII clock, the reset process will be interfered by this clock.
            So we need another GPIO to control the switch on / off of the RMII clock.

    if EXAMPLE_PHY_USE_POWER_PIN
        config EXAMPLE_PHY_POWER_PIN
            int "PHY power pin"
            default 5
            range 0 33
            help
                Set the GPIO number used for powering on/off the PHY.
    endif

    config EXAMPLE_PHY_SMI_MDC_PIN
        int "Ethernet SMI MDC gpio number"
        default 23
        range 0 33
        help
            GPIO number used for SMI clock signal.

    config EXAMPLE_PHY_SMI_MDIO_PIN
        int "Ethernet SMI MDIO gpio number"
        default 18
        range 0 33
        help
            GPIO number used for SMI data signal.

    config EXAMPLE_WIFI_SSID
        string "Wi-Fi SSID"
        default "eth2ap"
        help
            Set the SSID of Wi-Fi ap interface.

    config EXAMPLE_WIFI_PASSWORD
        string "Wi-Fi Password"
        default "12345678"
        help
            Set the password of Wi-Fi ap interface.

    config EXAMPLE_MAX_STA_CONN
        int "Maximum STA connections"
        default 4
        help
            Maximum number of the station that allowed to connect to current Wi-Fi hotspot.

endmenu