test cases: - CI ready: 'Yes' ID: ^WIFI_CONN_0601 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - WIFI CONN - ['R PC_COM C +WIFICONN:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 ap -L - ['R SSC1 C +LSTA:', 'R SSC1 C +LSTA:', R SSC1 C +LSTADONE] comment: '' execution time: 0.0 expected result: '1.target1 set AP 2.PC WIFI CONNECTED 3.target2 jap target 1 4.查询到两个sta 连接到target1 上' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: '1. target1下设置ssid 和pwd 加密方式 2.PC WIFI CONNECTED target1 3.target2 jap target 1 4.查询到两个sta 连接到target1 上' sub module: WIFI Connect summary: list stations connected to soft ap test test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: list SoftAP connected station version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_ICMP_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ping -i - ['R SSC1 C +PING:OK'] - - SSC SSC1 ping -i -c 2 - ['R SSC1 C +PING:OK'] comment: '' execution time: 0.0 expected result: '1.ok 2.ok' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.ping -i 2.ping -i -c 2' sub module: ICMP summary: ping function test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: ping function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: SYS_MISC_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 reboot - [R SSC1 C !!!ready!!!] comment: '' execution time: 0.0 expected result: 重启成功 initial condition: None initial condition description (auto): none module: System steps: 系统重启 sub module: Misc summary: test reboot function test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: sw reboot version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_ARP_0202 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - STRING ether%20src%20%%s%20or%20ether%20dst%20%%s - [R PC_COM C OK] - - NIC NIC1 START capture+send+block_arp_ip - ['R PC_COM C +NIC_START:OK'] - - NIC NIC1 SEND ARP arp_op_code "request" arp_target_proto_addr "192.168.11.240" ethernet_len_type "ARP" ethernet_dst_addr "ff:ff:ff:ff:ff:ff" - [''] - - DELAY 2 - [P PC_COM C +DELAYDONE, P NIC1 NPDU (Ethernet.dst_addr=)(Ethernet.len_type="ARP")] - - NIC NIC1 SEND ARP arp_op_code "request" arp_target_proto_addr arp_sender_hw_addr "18:18:18:18:18:18" ethernet_len_type "ARP" ethernet_dst_addr "ff:ff:ff:ff:ff:ff" - [''] - - DELAY 2 - [P PC_COM C +DELAYDONE, P NIC1 NPDU (Ethernet.dst_addr=)(Ethernet.len_type="ARP")] - - NIC NIC1 SEND ARP arp_op_code "request" arp_target_proto_addr arp_sender_proto_addr ethernet_dst_addr "ff:ff:ff:ff:ff:ff" - [''] - - DELAY 2 - [P PC_COM C +DELAYDONE, P NIC1 NPDU (Ethernet.dst_addr=)(Ethernet.len_type="ARP")] comment: '' execution time: 0.0 expected result: 1. PC can't recv ARP reply from target initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: 1. PC send ARP req with target_hw_addr, sender_hw_addr and sender_proto_addr not correct sub module: ARP summary: PC send invalid ARP request to target 2 test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: handling ARP request version: v1 (2015-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0302 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 ip -S -i 192.168.123.123 -o 2 - ['R SSC1 C +IP:ERROR'] - - SSC SSC1 dhcp -L -s 192.168.2.2 -e 192.168.2.10 - ['R SSC1 C +DHCP:LEASE,ERROR'] - - SSC SSC1 ap -S -s -p -t - [''] - - SSC SSC2 sta -C -s -p - ['P SSC2 C +JAP:CONNECTED'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 ip -S -i 192.168.4.1 -o 2 - ['R SSC1 C +IP:OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.10 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC2 sta -C -s -p - [''] - - DELAY 10 - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] comment: '' execution time: 0.0 expected result: '1.target 1 OK 2.target1 ERROR 3.target1 ERROR 4.target2 jap target1 OK 5.target1 OK 6.target1 OK 7.target1 OK 8.target2 jap target1 OK' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: TCPIP steps: "1.target1 打开DHCP 2\n2.target1 设置softAP ip 192.168.123.123\n3.target1 设置地址池\n\ 4.target1下设置ssid 和pwd 加密方式\n5.target2 连接target1 \n6.target1 关闭DHCP 2\n7.target1\ \ 设置softAP ip \n8.target1 设置正确的地址池\n9.target2 连接target1" sub module: DHCP summary: ap dhcp static ip interaction test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: interaction test point 2: static IP and DHCP interaction test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0301 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -i 192.168.123.123 -o 1 - ['R SSC1 C +IP:OK'] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:CONNECTED'] - - SSC SSC1 ip -S -i 0.0.0.0 -o 1 - ['R SSC1 C +IP:OK'] - - SSC SSC1 sta -C -s -p - [''] - - DELAY 10 - [P PC_COM C +DELAYDONE, 'P SSC1 NC +JAP:CONNECTED'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.JAP CONNETED 4.OK 5.等待10s，JAP fail' initial condition: STAAP1 initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen by STAM1) module: TCPIP steps: '1.target1 关闭DHCP 1 2.target1 设置sta ip 192.168.123.123 4.target1 jap AP 5.target1 设置sta ip 0.0.0.0 6.target1 jap AP' sub module: DHCP summary: sta dhcp static ip interaction test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: interaction test point 2: static IP and DHCP interaction test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0113 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] comment: '' execution time: 0.0 expected result: '1.ok 2.ok 3.ok 4.ok 5.ok' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上UDP传输，Bind socket2,本地ip target_udp_port2 3.target1上UDP传输，Bind socket3,本地ip target_udp_port3 4.target1上UDP传输，Bind socket4,本地ip target_udp_port4 5.target1上UDP传输，Bind socket5,本地ip target_udp_port5' sub module: UDP summary: AP mode, create max udp socket test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0302 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 ip -S -i 192.168.123.123 -o 2 - ['R SSC1 C +IP:ERROR'] - - SSC SSC1 dhcp -L -s 192.168.2.2 -e 192.168.2.10 - ['R SSC1 C +DHCP:LEASE,ERROR'] - - SSC SSC1 ap -S -s -p -t - [''] - - SSC SSC2 sta -C -s -p - ['P SSC2 C +JAP:CONNECTED'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 ip -S -i 192.168.4.1 -o 2 - ['R SSC1 C +IP:OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.10 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC2 sta -C -s -p - [''] - - DELAY 10 - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] comment: '' execution time: 0.0 expected result: '1.target 1 OK 2.target1 ERROR 3.target1 ERROR 4.target2 jap target1 OK 5.target1 OK 6.target1 OK 7.target1 OK 8.target2 jap target1 OK' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: TCPIP steps: "1.target1 打开DHCP 2\n2.target1 设置softAP ip 192.168.123.123\n3.target1 设置地址池\n\ 4.target1下设置ssid 和pwd 加密方式\n5.target2 连接target1 \n6.target1 关闭DHCP 2\n7.target1\ \ 设置softAP ip \n8.target1 设置正确的地址池\n9.target2 连接target1 " sub module: DHCP summary: ap dhcp static ip interaction test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: interaction test point 2: static IP and DHCP interaction test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0301 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -i 192.168.123.123 -o 1 - ['R SSC1 C +IP:OK'] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:CONNECTED'] - - SSC SSC1 ip -S -i 0.0.0.0 -o 1 - ['R SSC1 C +IP:OK'] - - SSC SSC1 sta -C -s -p - [''] - - DELAY 10 - [P PC_COM C +DELAYDONE, 'P SSC1 NC +JAP:CONNECTED'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.JAP CONNETED 4.OK 5.等待10s，JAP fail' initial condition: STAM1 initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a TC with initial condition STAAP1 module: TCPIP steps: '1.target1 关闭DHCP 1 2.target1 设置sta ip 192.168.123.123 4.target1 jap AP 5.target1 设置sta ip 0.0.0.0 6.target1 jap AP' sub module: DHCP summary: sta dhcp static ip interaction test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: interaction test point 2: static IP and DHCP interaction test version: v1 (2016-8-15) - CI ready: 'Yes' ID: SYS_MISC_0201 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ram -H - ['R SSC1 RE FREEHEAP:\d+\r\n'] comment: '' execution time: 0.0 expected result: ' 可以查询到一个数值 ' initial condition: None initial condition description (auto): none module: System steps: 查询空闲ram sub module: Misc summary: get heap size test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: 'get heap size ' version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_ARP_0204 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - STRING ether%20src%20%%s%20or%20ether%20dst%20%%s - [R PC_COM C OK] - - NIC NIC1 START capture+send+block_arp_ip - ['R PC_COM C +NIC_START:OK'] - - NIC NIC1 SEND ARP arp_op_code 0xFF arp_target_proto_addr ethernet_dst_addr "ff:ff:ff:ff:ff:ff" - [''] - - DELAY 2 - [P PC_COM C +DELAYDONE, P NIC1 NPDU (Ethernet.dst_addr=)(Ethernet.len_type="ARP")] comment: '' execution time: 0.0 expected result: 1. PC can't recv ARP reply from target initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: 1. PC send ARP with error op_code sub module: ARP summary: PC send invalid ARP request to target 4 test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: handling ARP request version: v1 (2015-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0412 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK 7.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket1 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 4.PC与target1创建好TCP 连接，有ACCEPT 5.target1上创建TCP socket2 6.关闭socket1 连接 7.关闭socket2连接' sub module: TCP summary: close TCP send after socket changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0403 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 op -S -o 2 - ['P SSC1 C +MODE:OK', 'P SSC1 RE CLOSED:\d+,0'] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.ERROR' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.修改8266的Mode为softAP mode\ \ \n6.8266往PC上发送5字节数据" sub module: TCP summary: do TCP send after mode changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0402 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 sta -D - ['P SSC1 C +QAP:OK', 'P SSC1 RE CLOSED:\d+,0'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket1 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 4.PC与target1创建好TCP 连接，有ACCEPT 5.断开与AP 连接 6.关闭建立的socket1连接' sub module: TCP summary: "close TCP socket after WIFI \ndisconnected" test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0401 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 sta -D - ['P SSC1 C +QAP:OK', 'P SSC1 RE CLOSED:\d+,0'] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.ERROR' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket1 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 4.PC与target1创建好TCP 连接，有ACCEPT 5.断开与AP 连接 6.8266往PC上发送5字节数据' sub module: TCP summary: do TCP send after WIFI disconnected test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_ADDR_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 mac -S -o 1 -m 44:55:66:77:88:99 - ['R SSC1 C +MAC:STA,OK'] - - SSC SSC1 mac -S -o 2 -m 22:33:44:55:66:77 - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 mac -Q -o 3 - ['R SSC1 C +STAMAC:44:55:66:77:88:99 C +APMAC:22:33:44:55:66:77'] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.ok 3.ok 4.ok 5.ok 6.ok' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: "1.target1 设置mode 为sta+softAP mode\n2.target1 设置sta mode 下的mac \n3.target1\ \ 设置softAP mode 下的mac\n4.target1 查询softAP+sta 下的mac\n5.target1 设置sta mode 下的mac\ \ 为target1_mac\n6.target1 设置softAP mode 下的mac 为target1_ap_mac" sub module: MAC Address summary: set mac, query mac test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: mac address function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0407 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 - ['P SSC1 C +IP:OK', 'P SSC1 RE CLOSED:\d+,0'] - - SSC SSC1 ip -Q -o 1 - ['R SSC1 C +STAIP:192.168.111.210'] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK 7.OK 8.ERROR' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.关闭8266的DHCP 1\n6.设置sta\ \ ip \n7.查询sta ip 地址是否生效\n8.8266往PC上发送5字节数据" sub module: TCP summary: do TCP send after IP changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0406 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - NIC DISABLED - [R PC_COM C OK] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.PC上网卡禁止掉 \n6.关闭建立的socket1连接" sub module: TCP summary: close TCP socket after PC NIC disabled test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0404 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 op -S -o 2 - ['P SSC1 C +MODE:OK', 'P SSC1 RE CLOSED:\d+,0'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.修改8266的Mode为softAP mode\ \ \n6.关闭建立的socket1连接" sub module: TCP summary: close TCP socket after mode changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0903 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -C -s -p bacfd - ['R SSC1 C +JAP:DISCONNECTED,4,2'] comment: '' execution time: 0.0 expected result: 1. disconect event reason REASON_AUTH_EXPIRE initial condition: STAAP1 initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen by STAM1) module: WIFI MAC steps: 1. connect WEP ap with error password (valid wep password) sub module: WIFI Connect summary: test wifi disconnect reason REASON_AUTH_EXPIRE test environment: SSC_T1_WEP test environment description (auto): '1 SSC target connect with PC by UART. One WEP share key AP placed near SSC1.' test point 1: basic function test point 2: wifi disconnect reason test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0408 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 - ['P SSC1 C +IP:OK', 'P SSC1 RE CLOSED:\d+,0'] - - SSC SSC1 ip -Q -o 1 - ['R SSC1 C +STAIP:192.168.111.210'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK 7.OK 8.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.关闭8266的DHCP 1\n6.设置sta\ \ ip \n7.查询sta ip 地址是否生效\n8.关闭建立的socket1连接" sub module: TCP summary: close TCP socket after IP changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0202 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,ERROR'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,ERROR'] - - SSC SSC1 soc -L -s 1000 - ['R SSC1 RE LISTEN:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.ERROR 4.OK 5.OK 6.ERROR 7.OK 8.ERROR 9.ERROR' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, 3.target1上使用步骤2创建的socket，去建立TCP 监听 4.target1上创建TCP socket 5.target1上使用步骤4创建的socket，去连接 PC的ip， 6.target1上使用步骤4创建的socket,创建TCP 监听 7.target1上shutdown 步骤4的socket 8.target1上使用步骤4创建的socket,创建TCP 监听 9.target1上使用不存在socket,创建TCP 监听' sub module: TCP summary: STA mode, server listen test. use socket in state that can't listen test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0110 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [SOCR SOC_COM L OK] - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,OK', P SOC1 C +ACCEPT] - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i 123.456.678.789 -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.ERROR 6.ERROR' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 4.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 5.target1上使用步骤4创建的socket,去连接不存在的ip，test_tcp_port1 6.target1上使用步骤2创建的socket，去连接 PC的ip，远端端口不存在。' sub module: TCP summary: AP mode, connect test. use different ip, port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0203 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s - ['R SSC1 RE SEND:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s - ['R SSC1 RE SEND:\d+,ERROR'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -S -s - ['R SSC1 RE SEND:\d+,ERROR'] - - SSC SSC1 soc -S -s 1000 - ['R SSC1 RE SEND:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.ERROR 4.OK 5.ERROR 6.OK 7.OK 8.ERROR 9.ERROR' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建UDP传输socket1， 3.target1上使用步骤2创建的socket1，去发送数据 4.target1上创建TCP socket2 5.target1上使用步骤4创建的socket2，去发送数据 6.target1上使用步骤4创建的socket2,创建TCP连接，连接成功 7.target1上shutdown 步骤4的socket2 8.target1往socket2发送错误命令发送数据 9.target1上不指定socket往上发送数据' sub module: TCP summary: send test. use socket in state that can't send test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -i 0.0.0.0 - ['R SSC1 C +IP:OK'] - - SSC SSC1 sta -C -s -p - [''] - - DELAY 20 - [P PC_COM C +DELAYDONE, 'P SSC1 NC +JAP:CONNECTED'] - - SSC SSC1 dhcp -S -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -Q - ['R SSC1 C +STAIP:0.0.0.0'] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:CONNECTED'] - - SSC SSC1 ip -Q - ['R SSC1 RE "\+STAIP:%%s"%%()'] comment: '' execution time: 0.0 expected result: "1.target1 关闭DHCP OK\n2.target1 设置ip add OK\n3.target1 连接AP fail\n\ 4.target1 打开DHCP OK\n5.查询到sta ip \n6.target1 连接AP ok\n7.查询到sta ip 为target_ip" initial condition: STAM1 initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a TC with initial condition STAAP1 module: TCPIP steps: "1.target1 关闭DHCP OK\n2.target1 设置ip add OK\n3.target1 连接AP fail\n4.target1\ \ 打开DHCP OK\n5.查询到sta ip \n6.target1 连接AP ok\n7.查询到sta ip 为target_ip" sub module: DHCP summary: dhcp client function test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP client function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 3 - ['R SSC1 C +DHCP:AP,OK C +DHCP:STA,OK'] - - SSC SSC1 dhcp -Q -o 3 - ['R SSC1 C +DHCP:STA,STARTED C +DHCP:AP,STARTED'] - - SSC SSC1 dhcp -Q -o 1 - ['R SSC1 C +DHCP:STA,STARTED NC +DHCP:AP,STARTED'] - - SSC SSC1 dhcp -Q -o 2 - ['R SSC1 NC +DHCP:STA,STARTED C +DHCP:AP,STARTED'] - - SSC SSC1 dhcp -E -o 3 - ['R SSC1 C +DHCP:AP,OK C +DHCP:STA,OK'] - - SSC SSC1 dhcp -Q -o 3 - ['R SSC1 C +DHCP:STA,STOPPED C +DHCP:AP,STOPPED'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.STA&AP STARTED 4.STA STARTED 5.AP STARTED 6.OK 7.STA&AP STOPPED' initial condition: STAM1 initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a TC with initial condition STAAP1 module: TCPIP steps: '1.target1 设置mode 为sta+softAP mode 2.target1 打开DHCP 3 3.target1 查询DHCP 状态 4.target1 查询sta DHCP 状态 5.target1 查询softAP DHCP 状态 6.target1 关闭 DHCP 3 7.target1 查询 DHCP 状态' sub module: DHCP summary: dhcp status query test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP client function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC2 sta -C -s -p - [''] - - DELAY 20 - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] comment: '' execution time: 0.0 expected result: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target\ \ 1,FAIL \n4.target1 打开DHCP OK\n5.target2 jap target 1,ok" initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: TCPIP steps: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target 1,FAIL \n\ 4.target1 打开DHCP OK\n5.target2 jap target 1,ok" sub module: DHCP summary: dhcp server function test test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP client function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0303 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - SSC SSC1 op -S -o 2 - ['P SSC1 C +MODE:OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.ERROR' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ 4.修改8266的Mode为softAP mode \n5.8266往PC上发送5字节数据" sub module: UDP summary: do UDP send after mode changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_SCAN_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -D - ['R SSC1 C +QAP:'] - - SSC SSC1 ap -S -s -p 123456789 -t 3 -n 6 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S -n 5 - [R SSC2 NP C +SCANDONE] - - SSC SSC2 sta -S -n 6 - ['R SSC2 C +SCAN:', R SSC2 P ] comment: '' execution time: 0.0 expected result: '1.target1 QAP 2. target1 set AP,set channel 6 3.target2 上scan不到 channel 5 4.target2 上查询channel 6的' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1.target1 断开连接AP 2.target1下设置ssid 和pwd 加密方式,set channel 6 3.target2 上scan channel 5 4.target2 上查询channel 6的' sub module: WIFI Scan summary: scan with scan config channel test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: scan with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_SCAN_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC2 sta -S -b ff:ff:ff:ff:ff:11 - ['R SSC2 NC +SCAN: C +SCANDONE'] - - SSC SSC2 sta -S -b - ['R SSC2 RE "\+SCAN:.+,%%s"%%()', 'R SSC2 NC +SCAN: C +SCANDONE'] comment: '' execution time: 0.0 expected result: '1.target2 上不能查询到此mac 2.target2上查询到' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1.target2 上查询此macff:ff:ff:ff:ff:11 2.target2上查询' sub module: WIFI Scan summary: scan with scan config bssid test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: scan with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_SCAN_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC2 sta -S -s .,juhg123 - ['R SSC2 NC +SCAN: C +SCANDONE'] - - SSC SSC1 ap -S -s -p 123456789 -t 3 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S -s - ['R SSC2 C +SCAN:', R SSC2 P , 'R SSC2 NC +SCAN: C +SCANDONE'] comment: '' execution time: 0.0 expected result: '1.target 2上不能scan .,juhg123 2.target1 set AP 3.target2上查询到' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1.target 2 scan .,juhg123 2.target1下设置ssid 和pwd 加密方式 3.target2 scan ' sub module: WIFI Scan summary: scan with scan config ssid test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: scan with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_SCAN_0105 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -D - ['R SSC1 C +QAP:'] - - SSC SSC1 ap -S -s -p 123456789 -t 3 -h 0 -n 11 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S -s -b -n 11 - [R SSC2 P C +SCANDONE] - - SSC SSC2 sta -S -s -b -n 11 - [R SSC2 NP C +SCANDONE] - - SSC SSC2 sta -S -s -b ff:ff:ff:ff:ff:11 -n 11 - [R SSC2 P , R SSC2 NP C +SCANDONE] - - SSC SSC2 sta -S -s -b -n 10 - [R SSC2 P , R SSC2 NP C +SCANDONE] comment: '' execution time: 0.0 expected result: '1.target1 QAP 2. target1 set AP,set ssid broad cast,set channel 11 3.target2 上查询到 4.target2 上查询不到 5.target2 上查询不到 6.target2 上查询不到' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1.target1 QAP 2. target1 set AP,set ssid broad cast,set channel 11 3.target2 上查询到 4.target2 上查询不到 5.target2 上查询不到 6.target2 上查询不到' sub module: WIFI Scan summary: scan with several configs test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: scan with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_SCAN_0104 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p 123456789 -t 3 -h 0 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S -h 0 - [R SSC2 P C +SCANDONE] - - SSC SSC2 sta -S -h 1 - [R SSC2 P C +SCANDONE] - - SSC SSC1 ap -S -s -p 123456789 -h 1 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S -h 0 - [R SSC2 NP C +SCANDONE] - - SSC SSC2 sta -S -h 1 - [R SSC2 P C +SCANDONE] comment: '' execution time: 0.0 expected result: '1.target1 set AP,set ssid broad cast 2.target 2上scan 3.target 2上scan 4.target1 set AP,set ssid hidden, 5.target 2上不能查询到 6.target 2上查询到' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1.target1下设置ssid 和pwd 加密方式,set ssid broad cast 2.target 2上scan 3.target 2上scan 4.target1下设置ssid 和pwd 加密方式,set ssid hidden, 5.target 2上查询 6.target 2上查询' sub module: WIFI Scan summary: scan with scan config show hidden test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: scan with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0302 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - SSC SSC1 sta -D - ['P SSC1 C +QAP:OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据 4.断开与AP 连接 5.关闭建立的socket1连接' sub module: UDP summary: "close UDP socket after WIFI \ndisconnected" test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0301 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -i -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - SSC SSC1 sta -D - ['P SSC1 C +QAP:OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.ERROR' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据 4.断开与AP 连接 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据' sub module: UDP summary: do UDP send after WIFI disconnected test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0201 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 sta -Q - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 sta -D - ['R SSC1 C +QAP:OK'] - - SSC SSC1 sta -Q - ['R SSC1 C +JAP:DISCONNECTED'] comment: '' execution time: 0.0 expected result: '1.target1 jion AP 成功 2.查询JAP的状态 3.target1 断开AP 4.查询target1 JAP 是DISCONN' initial condition: STAM1 initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a TC with initial condition STAAP1 module: WIFI MAC steps: '1.target1 jion AP 成功 2.查询JAP的状态 3.target1 断开AP 4.查询target1 JAP 是DISCONN' sub module: WIFI Connect summary: JAP query test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: query JAP status version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0702 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:OK', 'R SSC1 C +JAP:DISCONNECTED,3'] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:OK', 'R SSC1 C +JAP:DISCONNECTED,2'] comment: '' execution time: 0.0 expected result: '1. get status AP not exist in disconnect event 2. get status wrong password in disconnect event' initial condition: STAM1 initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a TC with initial condition STAAP1 module: WIFI MAC steps: '1. sta connect to ap not exist 2. sta connect to ap with wrong password ' sub module: WIFI Connect summary: check wifi status wrong password, no ap found test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: wifi connect status check version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0703 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -C -s -p bacfd - ['R SSC1 C +JAP:DISCONNECTED,4,2'] comment: '' execution time: 0.0 expected result: 1. connect status connect fail in disconnect evnet initial condition: STAM1 initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a TC with initial condition STAAP1 module: WIFI MAC steps: 1. connect WEP ap with error password (valid wep password) sub module: WIFI Connect summary: check wifi status connect fail test environment: SSC_T1_WEP test environment description (auto): '1 SSC target connect with PC by UART. One WEP share key AP placed near SSC1.' test point 1: basic function test point 2: wifi connect status check version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DNS_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -H -d iot.espressif.cn - ['R SSC1 A :\+HOSTIP:OK,(.+)\r\n'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :\+BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p 9001 - ['R SSC1 RE \+CONNECT:\d+,OK'] - - SSC SSC1 soc -S -s -l 10 - ['P SSC1 RE \+SEND:\d+,OK', P SSC1 SL +10] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1. get host name "espressif.cn" 2. connect, send, recv1. get host name "espressif.cn" 2. connect, send, recv' sub module: DNS summary: TCP connect to iot.espressif.com test environment: SSC_T1_2 test environment description (auto): 'Able to access WAN after connect to AP. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DNS function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DNS_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -H -d iot.espressif.cn - ['R SSC1 C +HOSTIP:OK,115.29.202.58'] comment: '' execution time: 0.0 expected result: 1.OK initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: 1. get host name "espressif.cn" sub module: DNS summary: get host by name test test environment: SSC_T1_2 test environment description (auto): 'Able to access WAN after connect to AP. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DNS function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0904 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 3 -m 1 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p 1234567890 - ['R SSC2 C +JAP:DISCONNECTED,1,204'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:OK'] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:DISCONNECTED,1,5'] - - WIFI DISCONN - [P PC_COM C OK, 'R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 ap -S -s -p -t 3 -m 1 - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:DISCONNECTED,5,4'] comment: '' execution time: 0.0 expected result: '1. succeed 2. disconnect event REASON_HANDSHAKE_TIMEOUT 3. succeed 4. succeed 5. disconnect event REASON_ASSOC_TOOMANY 6. succeed, target2 connect succeed 7. disconnect event REASON_ASSOC_EXPIRE' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1. config target1 softap max sta allowed 1 2. target2 connect to target1 with wrong password 3. target2 disconnect 4. PC WIFI NIC connect to target1 5. target2 connect to target1 with correct password 6. PC WIFI NIC disconnect 7. reconfig softap' sub module: WIFI Connect summary: test wifi disconnect reason REASON_ASSOC_TOOMANY, REASON_HANDSHAKE_TIMEOUT, REASON_ASSOC_EXPIRE test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: wifi disconnect reason test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_IP_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 dhcp -S -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -o 1 -i 192.168.123.123 - ['R SSC1 C +IP:ERROR'] - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -o 1 -i 192.168.123.123 - ['R SSC1 C +IP:OK'] - - SSC SSC1 ip -Q -o 1 - ['R SSC1 C +STAIP:192.168.123.123'] comment: '' execution time: 0.0 expected result: '1.OK 2.ERROR 3.OK 4.OK 5.STAIP:192.168.123.123' initial condition: STAM1 initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a TC with initial condition STAAP1 module: TCPIP steps: '1.target1 打开DHCP 1 2.target1 设置sta ip 192.168.123.123 4.target1 关闭DHCP 1 5.target1 设置sta ip 192.168.123.123 6.target1 查询 当前sta ip ' sub module: IP summary: sta set and query static ip test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: set and query static IP version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_IP_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 ip -S -o 2 -i 192.168.123.123 - ['R SSC1 C +IP:ERROR'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 ip -S -o 2 -i 192.168.123.123 - ['R SSC1 C +IP:OK'] - - SSC SSC1 ip -Q -o 2 - ['R SSC1 C +APIP:192.168.123.123'] - - SSC SSC1 ip -S -o 2 -i - ['R SSC1 C +IP:OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.ERROR 3.OK 4.OK 5.APIP:192.168.123.123 6.OK' initial condition: APM1 initial condition description (auto): AP mode, DHCP on, will autogen a TC with initial condition APSTA1 module: TCPIP steps: "1.target1 打开DHCP 2\n2.target1 设置softAP ip 192.168.123.123\n4.target1 关闭DHCP\ \ 2\n5.target1 设置softAP ip 192.168.123.123\n6.target1 查询 当前sta ip \n7.target1\ \ 设置softAP ip 为target_ap_ip" sub module: IP summary: ap set and query static ip test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: set and query static IP version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0201 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 sta -Q - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 sta -D - ['R SSC1 C +QAP:OK'] - - SSC SSC1 sta -Q - ['R SSC1 C +JAP:DISCONNECTED'] comment: '' execution time: 0.0 expected result: '1.target1 jion AP 成功 2.查询JAP的状态 3.target1 断开AP 4.查询target1 JAP 是DISCONN' initial condition: STAAP1 initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen by STAM1) module: WIFI MAC steps: '1.target1 jion AP 成功 2.查询JAP的状态 3.target1 断开AP 4.查询target1 JAP 是DISCONN' sub module: WIFI Connect summary: JAP query test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: query JAP status version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_IGMP_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 igmp -L -h -m 224.1.1.2 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -L -h 192.168.237.77 -m 224.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -L -h 192.168.237.77 -m 240.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] comment: '' execution time: 0.0 expected result: '1. success 2. failed 3. failed 4. failed 5. succeed' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1. join group with correct host addr and multicast addr 2. leave group with correct host addr and wrong multicast addr 3. leave group with wrong host addr and correct multicast addr 4. leave group with wrong host addr and wrong multicast addr 5. leave group with correct host addr and correct multicast addr' sub module: IGMP summary: station IGMP leave group address check test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP API parameter check version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_IGMP_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 igmp -J -h -m 223.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -J -h -m 240.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -J -h 192.168.237.77 -m 224.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -J -h 192.168.237.77 -m 240.1.1.1 - ['R SSC1 C +IGMP:ERROR'] comment: '' execution time: 0.0 expected result: '1. success 2. failed 3. failed 4. failed' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1. join group with correct host addr and multicast addr 2. join group with correct host addr and wrong multicast addr 3. join group with wrong host addr and correct multicast addr 4. join group with wrong host addr and wrong multicast addr' sub module: IGMP summary: station IGMP join group address check test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP API parameter check version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_IGMP_0104 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 igmp -L -h -m 224.1.1.2 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -L -h 192.168.237.77 -m 224.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -L -h 192.168.237.77 -m 240.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] comment: '' execution time: 0.0 expected result: '1. success 2. failed 3. failed 4. failed 5. succeed' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1. join group with correct host addr and multicast addr 2. leave group with correct host addr and wrong multicast addr 3. leave group with wrong host addr and correct multicast addr 4. leave group with wrong host addr and wrong multicast addr 5. leave group with correct host addr and correct multicast addr' sub module: IGMP summary: softAP IGMP leave group address check test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP API parameter check version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0703 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -C -s -p bacfd - ['R SSC1 C +JAP:DISCONNECTED,4,2'] comment: '' execution time: 0.0 expected result: 1. connect status connect fail in disconnect evnet initial condition: STAAP1 initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen by STAM1) module: WIFI MAC steps: 1. connect WEP ap with error password (valid wep password) sub module: WIFI Connect summary: check wifi status connect fail test environment: SSC_T1_WEP test environment description (auto): '1 SSC target connect with PC by UART. One WEP share key AP placed near SSC1.' test point 1: basic function test point 2: wifi connect status check version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0110 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 1 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1] - - SSC SSC1 soc -S -s -i -p -l 1472 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1472] - - SSC SSC1 soc -S -s -i -p -l 1473 - ['P SSC1 RE SEND:(\d+),OK', P SOC_COM NC SOC_RECVFROM] - - SSC SSC1 soc -S -s -i -p -l 1472 -n 10 -j 20 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 14720] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK,没收到UDP包 6.OK' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1字节数据 4.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472字节数据 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1473字节数据 6.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472*10字节数据' sub module: UDP summary: AP mode, sendto test with different length test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_SCAN_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC2 sta -S -b ff:ff:ff:ff:ff:11 - ['R SSC2 NC +SCAN: C +SCANDONE'] - - SSC SSC2 sta -S -b - ['R SSC2 RE "\+SCAN:.+,%%s"%%()', 'R SSC2 NC +SCAN: C +SCANDONE'] comment: '' execution time: 0.0 expected result: '1.target2 上不能查询到此mac 2.target2上查询到' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: '1.target2 上查询此macff:ff:ff:ff:ff:11 2.target2上查询' sub module: WIFI Scan summary: scan with scan config bssid test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: scan with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_SCAN_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -D - ['R SSC1 C +QAP:'] - - SSC SSC1 ap -S -s -p 123456789 -t 3 -n 6 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S -n 5 - [R SSC2 NP C +SCANDONE] - - SSC SSC2 sta -S -n 6 - ['R SSC2 C +SCAN:', R SSC2 P ] comment: '' execution time: 0.0 expected result: '1.target1 QAP 2. target1 set AP,set channel 6 3.target2 上scan不到 channel 5 4.target2 上查询channel 6的' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: '1.target1 断开连接AP 2.target1下设置ssid 和pwd 加密方式,set channel 6 3.target2 上scan channel 5 4.target2 上查询channel 6的' sub module: WIFI Scan summary: scan with scan config channel test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: scan with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_SCAN_0104 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p 123456789 -t 3 -h 0 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S -h 0 - [R SSC2 P C +SCANDONE] - - SSC SSC2 sta -S -h 1 - [R SSC2 P C +SCANDONE] - - SSC SSC1 ap -S -s -p 123456789 -h 1 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S -h 0 - [R SSC2 NP C +SCANDONE] - - SSC SSC2 sta -S -h 1 - [R SSC2 P C +SCANDONE] comment: '' execution time: 0.0 expected result: '1.target1 set AP,set ssid broad cast 2.target 2上scan 3.target 2上scan 4.target1 set AP,set ssid hidden, 5.target 2上不能查询到 6.target 2上查询到' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: '1.target1下设置ssid 和pwd 加密方式,set ssid broad cast 2.target 2上scan 3.target 2上scan 4.target1下设置ssid 和pwd 加密方式,set ssid hidden, 5.target 2上查询 6.target 2上查询' sub module: WIFI Scan summary: scan with scan config show hidden test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: scan with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_SCAN_0105 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -D - ['R SSC1 C +QAP:'] - - SSC SSC1 ap -S -s -p 123456789 -t 3 -h 0 -n 11 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S -s -b -n 11 - [R SSC2 P C +SCANDONE] - - SSC SSC2 sta -S -s -b -n 11 - [R SSC2 NP C +SCANDONE] - - SSC SSC2 sta -S -s -b ff:ff:ff:ff:ff:11 -n 11 - [R SSC2 P , R SSC2 NP C +SCANDONE] - - SSC SSC2 sta -S -s -b -n 10 - [R SSC2 P , R SSC2 NP C +SCANDONE] comment: '' execution time: 0.0 expected result: '1.target1 QAP 2. target1 set AP,set ssid broad cast,set channel 11 3.target2 上查询到 4.target2 上查询不到 5.target2 上查询不到 6.target2 上查询不到' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: '1.target1 QAP 2. target1 set AP,set ssid broad cast,set channel 11 3.target2 上查询到 4.target2 上查询不到 5.target2 上查询不到 6.target2 上查询不到' sub module: WIFI Scan summary: scan with several configs test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: scan with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_IGMP_0104 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 igmp -L -h -m 224.1.1.2 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -L -h 192.168.237.77 -m 224.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -L -h 192.168.237.77 -m 240.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] comment: '' execution time: 0.0 expected result: '1. success 2. failed 3. failed 4. failed 5. succeed' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1. join group with correct host addr and multicast addr 2. leave group with correct host addr and wrong multicast addr 3. leave group with wrong host addr and correct multicast addr 4. leave group with wrong host addr and wrong multicast addr 5. leave group with correct host addr and correct multicast addr' sub module: IGMP summary: softAP IGMP leave group address check test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP API parameter check version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_IGMP_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 igmp -J -h -m 223.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -J -h -m 240.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -J -h 192.168.237.77 -m 224.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -J -h 192.168.237.77 -m 240.1.1.1 - ['R SSC1 C +IGMP:ERROR'] comment: '' execution time: 0.0 expected result: '1. success 2. failed 3. failed 4. failed' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1. join group with correct host addr and multicast addr 2. join group with correct host addr and wrong multicast addr 3. join group with wrong host addr and correct multicast addr 4. join group with wrong host addr and wrong multicast addr' sub module: IGMP summary: softAP IGMP join group address check test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP API parameter check version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_IGMP_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 igmp -L -h -m 224.1.1.2 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -L -h 192.168.237.77 -m 224.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -L -h 192.168.237.77 -m 240.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] comment: '' execution time: 0.0 expected result: '1. success 2. failed 3. failed 4. failed 5. succeed' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1. join group with correct host addr and multicast addr 2. leave group with correct host addr and wrong multicast addr 3. leave group with wrong host addr and correct multicast addr 4. leave group with wrong host addr and wrong multicast addr 5. leave group with correct host addr and correct multicast addr' sub module: IGMP summary: station IGMP leave group address check test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP API parameter check version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_IGMP_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 igmp -J -h -m 223.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -J -h -m 240.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -J -h 192.168.237.77 -m 224.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -J -h 192.168.237.77 -m 240.1.1.1 - ['R SSC1 C +IGMP:ERROR'] comment: '' execution time: 0.0 expected result: '1. success 2. failed 3. failed 4. failed' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1. join group with correct host addr and multicast addr 2. join group with correct host addr and wrong multicast addr 3. join group with wrong host addr and correct multicast addr 4. join group with wrong host addr and wrong multicast addr' sub module: IGMP summary: station IGMP join group address check test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP API parameter check version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0201 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -W -s -o 0 - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.PC OK 5.PC OK 6.PC OK 7.PC OK 8.PC OK SOC_CLOSE=SOC1' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上关闭工作线程 4.PC往8266上发送1472字节数据 5.PC往8266上发送1472字节数据 6.PC往8266上发送1472字节数据 7.PC往8266上发送1472字节数据 8.PC往8266上发送1472字节数据' sub module: UDP summary: STA mode, recv buffer test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: use UDP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_ICMP_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ping -i - ['R SSC1 C +PING:OK'] - - SSC SSC1 ping -i -c 2 - ['R SSC1 C +PING:OK'] comment: '' execution time: 0.0 expected result: '1.ok 2.ok' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.ping -i 2.ping -i -c 2' sub module: ICMP summary: ping function test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: ping function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_ADDR_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 mac -S -o 2 -m 44:55:66:77:88:99 - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 ap -S -s -p -t - [''] - - SSC SSC2 sta -S -b 44:55:66:77:88:99 - ['R SSC2 RE \+SCAN:.+,44:55:66:77:88:99,'] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC2 mac -Q -o 1 - ['R SSC2 A :\+STAMAC:(.+)\r\n'] - - SSC SSC2 mac -S -o 1 -m 22:33:44:55:66:77 - ['R SSC2 C +MAC:STA,OK'] - - SSC SSC2 sta -C -s -p - ['P SSC2 C +JAP:CONNECTED'] - - SSC SSC1 ap -L - ['R SSC1 C +LSTA:22:33:44:55:66:77'] - - SSC SSC2 mac -S -o 1 -m - ['R SSC2 C +MAC:STA,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.ok 3.ok 4.ok 5.ok 6.ok 7.ok 8.ok 9.ok' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: "1.target1 设置sta mode下的mac 44:55:66:77:88:99\n2.target1下设置ssid 和pwd 加密方式\n\ 3.target2 查询mac为44:55:66:77:88:99的ssid\n4.target1 设置sta mode下的mac target_ap_mac\n\ 5.target2 查询sta mode 下的mac 为target2_mac_tmp\n6.target2 设置sta mode 下的mac 为22:33:44:55:66:77\n\ 7.target2 jap target1\n8.target1 查询连接到的sta \n9.target2 设置sta mode 下的mac 为 target2_mac" sub module: MAC Address summary: set mac and do scan/JAP/SAP test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: mac address function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0108 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 C BIND:ERROR'] - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 RE BIND:(\d+),OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.ERROR 4.OK' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上UDP传输，Bind socket2,本地ip 0.0.0.0 target_udp_port2 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 4.target1上创建TCP socket3, target_udp_port1' sub module: UDP summary: AP mode, udp bind test. use different ip, port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0109 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC2 ip - ['R SSC2 A :STAIP:(.+)\r\n'] - - SSC SSC2 soc -B -t UDP -p - ['R SSC2 A :BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - [R SOC1 UL 5] - - SSC SSC1 soc -S -s -i -p -l 5 - ['R SSC2 RE "RECVFROM:%%s,5,%%s,%%u"%%(,,)'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK' initial condition: T2O_1 initial condition description (auto): same as T2_1 but will NOT autogen a TC with initial condition T2_2 module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.PC上SOC2 UDP传输，bing 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 4.target1上使用步骤3创建的socket1，往pc_ip，test_tcp_port1上发送10字节数据 5.target1上使用步骤3创建的socket1，往pc_ip2，test_tcp_port2上发送10字节数据' sub module: UDP summary: AP mode, sendto test. use different ip, port test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0106 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] comment: '' execution time: 0.0 expected result: '1.ok 2.ok 3.ok 4.ok 5.ok' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上UDP传输，Bind socket2,本地ip target_udp_port2 3.target1上UDP传输，Bind socket3,本地ip target_udp_port3 4.target1上UDP传输，Bind socket4,本地ip target_udp_port4 5.target1上UDP传输，Bind socket5,本地ip target_udp_port5' sub module: UDP summary: STA mode, create max udp socket test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0107 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -I - ['P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(,)'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上查询创建socket信息' sub module: UDP summary: STA mode, get active socket info test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0104 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SOC SOC1 SENDTO 1 - [R SSC1 SL +1] - - SOC SOC1 SENDTO 1472 - ['R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(,,)'] - - SOC SOC1 SENDTO 1473 - [P SSC1 NC +RECVFROM, P SOC_COM C OK] - - SOC SOC2 BIND - [R SOC_COM L OK] - - SOC SOC2 SENDTO 1472 - ['R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(,,)'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK,没收到UDP包 6.OK 7.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.PC往8266上发送1字节数据 4.PC往8266上发送1472字节数据 5.PC往8266上发送1473字节数据 6.PC上SOC2 UDP传输，bing 7.PC往8266上发送1472字节数据' sub module: UDP summary: STA mode, recvfrom basic test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0105 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.关闭socket1' sub module: UDP summary: STA mode, close UDP sockets test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SOC SOC2 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 10 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 10] - - SSC SSC1 soc -S -s -i -p -l 10 - ['P SSC1 RE SEND:(\d+),OK', P SOC2 UL 10] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.PC上SOC2 UDP传输，bing 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 4.target1上使用步骤3创建的socket1，往pc_ip，test_tcp_port1上发送10字节数据 5.target1上使用步骤3创建的socket1，往pc_ip2，test_tcp_port2上发送10字节数据' sub module: UDP summary: STA mode, sendto test. use different ip, port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 1 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1] - - SSC SSC1 soc -S -s -i -p -l 1472 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1472] - - SSC SSC1 soc -S -s -i -p -l 1473 - ['P SSC1 RE SEND:(\d+),OK', P SOC_COM NC SOC_RECVFROM] - - SSC SSC1 soc -S -s -i -p -l 1472 -n 10 -j 20 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 14720] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK,没有到UDP包 6.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1字节数据 4.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472字节数据 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1473字节数据 6.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472*10字节数据' sub module: UDP summary: STA mode, sendto test with different length test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 C BIND:ERROR'] - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 RE BIND:(\d+),OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.ERROR 4.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上UDP传输，Bind socket2,本地ip 0.0.0.0 target_udp_port2 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 4.target1上创建TCP socket3, target_udp_port1' sub module: UDP summary: STA mode, udp bind test. use different ip, port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_IGMP_0204 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p - ['R SSC1 A :\+BIND:(\d+),OK'] - - SSC SSC2 soc -B -t UDP -p - ['R SSC2 A :\+BIND:(\d+),OK'] - - SSC SSC2 soc -S -s -i 224.1.1.1 -p -l 10 - [R SSC1 SL +1] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4. target1 recv multicast packet' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: TCPIP steps: '1. target2 join SoftAP 2. target1 join group and create UDP socket using multicast addr 3. target2 create UDP socket 4. target2 send to multicast addr' sub module: IGMP summary: softAP send multicast packets test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP send/recv test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_IGMP_0201 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p - ['R SSC1 A :\+BIND:(\d+),OK'] - - SOC SOC1 BIND - [R SOC_COM L OK] - - SOC SOC1 SENDTO 1 224.1.1.1 - [R SSC1 SL +1] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. able to recv packet' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1. join group 2. create UDP socket using multicast addr 3. PC send UDP packet to multicast addr' sub module: IGMP summary: station IGMP recv packets test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP send/recv test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_IGMP_0202 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC2 op -S -o 1 - ['R SSC2 C +MODE:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p - ['R SSC1 A :\+BIND:(\d+),OK'] - - SSC SSC2 soc -B -t UDP -p - ['R SSC2 A :\+BIND:(\d+),OK'] - - SSC SSC2 soc -S -s -i 224.1.1.1 -p -l 10 - [R SSC1 SL +1] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4. target1 recv multicast packet' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1. target2 set to sta mode and join AP 2. target1 join group and create UDP socket using multicast addr 3. target2 create UDP socket 4. target2 send to multicast addr' sub module: IGMP summary: station send multicast packets test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP send/recv test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_IGMP_0203 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p - ['R SSC1 A :BIND:(\d+),OK'] - - SOC SOC1 BIND - [R SOC_COM L OK] - - SOC SOC1 SENDTO 1 224.1.1.1 - [R SSC1 SL +1] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. able to recv packet' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1. join group 2. create UDP socket using multicast addr 3. PC send UDP packet to multicast addr' sub module: IGMP summary: softAP IGMP recv packets test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP send/recv test version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0401 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -R -a 0 - ['R SSC1 C +AUTORECONN:OK'] - - SSC SSC1 sta -R -a 2 - ['R SSC1 C +AUTORECONN:0'] - - SSC SSC1 reboot - [''] - - DELAY 15 - [''] - - SSC SSC1 sta -Q - ['R SSC1 C JAP:DISCONNECTED'] - - SSC SSC1 sta -R -a 1 - ['R SSC1 C +AUTORECONN:OK'] - - SSC SSC1 sta -R -a 2 - ['R SSC1 C +AUTORECONN:1'] - - SSC SSC1 reboot - ['R SSC1 C +JAP:CONNECTED'] comment: '' execution time: 0.0 expected result: '1.设置autoreconn,关闭 2.查询当前autoreconn状态是否关闭 3.重启系统，等待15s 4.查询target1 未自动重连AP 5.设置autoreconn,开启 6.查询当前autoreconn状态是否开启 7.系统重启后target1 自动重连AP' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: WIFI MAC steps: '1.设置autoreconn,关闭 2.查询当前autoreconn状态是否关闭 3.重启系统，等待15s 4.查询target1 未自动重连AP 5.设置autoreconn,开启 6.查询当前autoreconn状态是否开启 7.系统重启后target1 自动重连AP' sub module: WIFI Connect summary: auto reconnect test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: power on auto reconnect test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0404 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 op -S -o 2 - ['P SSC1 C +MODE:OK', 'P SSC1 RE CLOSED:\d+,0'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.修改8266的Mode为softAP mode\ \ \n6.关闭建立的socket1连接" sub module: TCP summary: close TCP socket after mode changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0406 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - NIC DISABLED - [R PC_COM C OK] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.PC上网卡禁止掉 \n6.关闭建立的socket1连接" sub module: TCP summary: close TCP socket after PC NIC disabled test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0407 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 - ['P SSC1 C +IP:OK', 'P SSC1 RE CLOSED:\d+,0'] - - SSC SSC1 ip -Q -o 1 - ['R SSC1 C +STAIP:192.168.111.210'] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK 7.OK 8.ERROR' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.关闭8266的DHCP 1\n6.设置sta\ \ ip \n7.查询sta ip 地址是否生效\n8.8266往PC上发送5字节数据" sub module: TCP summary: do TCP send after IP changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0401 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 sta -D - ['P SSC1 C +QAP:OK', 'P SSC1 RE CLOSED:\d+,0'] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.ERROR' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket1 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 4.PC与target1创建好TCP 连接，有ACCEPT 5.断开与AP 连接 6.8266往PC上发送5字节数据' sub module: TCP summary: do TCP send after WIFI disconnected test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0402 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 sta -D - ['P SSC1 C +QAP:OK', 'P SSC1 RE CLOSED:\d+,0'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket1 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 4.PC与target1创建好TCP 连接，有ACCEPT 5.断开与AP 连接 6.关闭建立的socket1连接' sub module: TCP summary: "close TCP socket after WIFI \ndisconnected" test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0403 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 op -S -o 2 - ['P SSC1 C +MODE:OK', 'P SSC1 RE CLOSED:\d+,0'] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.ERROR' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.修改8266的Mode为softAP mode\ \ \n6.8266往PC上发送5字节数据" sub module: TCP summary: do TCP send after mode changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0408 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 - ['P SSC1 C +IP:OK', 'P SSC1 RE CLOSED:\d+,0'] - - SSC SSC1 ip -Q -o 1 - ['R SSC1 C +STAIP:192.168.111.210'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK 7.OK 8.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.关闭8266的DHCP 1\n6.设置sta\ \ ip \n7.查询sta ip 地址是否生效\n8.关闭建立的socket1连接" sub module: TCP summary: close TCP socket after IP changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0201 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -W -s -o 0 - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.PC OK 5.PC OK 6.PC OK 7.PC OK 8.PC OK SOC_CLOSE=SOC1' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上关闭工作线程 4.PC往8266上发送1472字节数据 5.PC往8266上发送1472字节数据 6.PC往8266上发送1472字节数据 7.PC往8266上发送1472字节数据 8.PC往8266上发送1472字节数据' sub module: UDP summary: STA mode, recv buffer test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: use UDP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0307 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 - ['P SSC1 C +IP:OK'] - - SSC SSC1 ip -Q -o 1 - ['R SSC1 C +STAIP:192.168.111.210'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK 7.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ 4.关闭8266的DHCP 1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.关闭建立的socket1连接" sub module: UDP summary: close UDP socket after IP changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0306 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 - ['P SSC1 C +IP:OK'] - - SSC SSC1 ip -Q -o 1 - ['R SSC1 C +STAIP:192.168.111.210'] - - SSC SSC1 soc -S -s -i -p -l 1 - ['P SSC1 RE SEND:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK 7.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ 4.关闭8266的DHCP 1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.8266往PC上发送5字节数据" sub module: UDP summary: do UDP send after IP changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0305 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - NIC DISABLED - [R PC_COM C OK] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ 4.PC上网卡禁止掉 \n5.关闭建立的socket1连接" sub module: UDP summary: close UDP socket after PC NIC disabled test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0304 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - SSC SSC1 op -S -o 2 - ['P SSC1 C +MODE:OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ 4.修改8266的Mode为softAP mode \n5.关闭建立的socket1连接" sub module: UDP summary: close UDP socket after mode changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t -h 0 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S -h 0 - [R SSC2 P , R SSC2 C +SCANDONE] - - SSC SSC1 ap -S -s -p -t -h 1 - ['R SSC1 C +SAP:OK'] - - DELAY 3 - [''] - - SSC SSC2 sta -S -h 0 - [R SSC2 C +SCANDONE] - - DELAY 3 - [''] - - SSC SSC2 sta -S -h 0 - [R SSC2 NP C +SCANDONE] comment: '' execution time: 0.0 expected result: '1.target1 set AP,set ssid broad cast 2.target 2上scan target_ap_mac 3.target1 set AP,set ssid hidden, 4.target 2上不能scan target_ap_mac' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: '1. target1下设置ssid 和pwd 加密方式,set ssid broad cast 2.target 2上scan target_ap_mac 3. target1下设置ssid 和pwd 加密方式,set ssid hidden, 4.target 2上scan target_ap_mac' sub module: WIFI Connect summary: station SAP+JAP test, ssid hidden test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: SAP/JAP with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [SOCR SOC_COM L OK] - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,OK', P SOC1 C +ACCEPT] - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i 123.456.678.789 -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.ERROR 6.ERROR' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 4.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 5.target1上使用步骤4创建的socket,去连接不存在的ip，test_tcp_port1 6.target1上使用步骤2创建的socket，去连接 PC的ip，远端端口不存在。' sub module: TCP summary: STA mode, connect test. use different ip, port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SOC SOC2 SEND 5 - [R SSC1 SL +5] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 5] - - SOC SOC2 SEND 146000 - [R SSC1 SL +146000] - - SSC SSC1 soc -S -s -l 1460 -n 100 - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 146000] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc上回accept 4.OK 5.target收到5 byte 6.PC收到5 byte 7.target收到 146000 byte 8.OK,PC 回SOC_RECV=SOC2,RECV_LEN=字节数' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1. PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 4.PC与target1 创建好TCP 连接，有ACCEPT 5.PC send 5 bytes to 8266 6.8266 send 5 bytes to PC 7. PC send 100 * 1460 data to 8266, 8.8266 send 100 * 1460 to PC.' sub module: TCP summary: STA mode, send/recv basic test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC1 CONNECT - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+', P SOC_COM C OK] - - SOC SOC1 CONNECT - [P SOC_COM C ERROR, P SSC1 NC ACCEPT] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.PC TCP client accept 4.error' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.target1上创建TCP socket，bind到本地端口 2.target1上使用步骤1创建的socket,创建TCP 监听 3.PC TCP 连接到target1 , 4.PC tcp 连接到不存在的port ,' sub module: TCP summary: STA mode, server listen test. use different kinds of port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0105 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC2 CONNECT - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK 6.OK 7.target1关闭socket1 8.target1关闭socket2 9.OK 10.OK,pc tcp server accept成功 11.target1关闭socket1 12.OK 13.OK,pc tcp server accept成功 14.OK 15.target1关闭socket1' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1关闭socket1\n\ 4.target1上创建TCP socket 端口随机\n5.target1上使用步骤4创建的socket1，去监听\n6.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket2 \n7.target1关闭socket1\n8.target1关闭socket2\n\ 9.target1上创建TCP socket1\n10.target1上使用步骤10创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT\n\ 11.target1关闭socket1\n12.target1上创建TCP socket1\n13.target1上使用步骤13创建的socket1，去连接\ \ PC的ip，test_tcp_port1,PC有ACCEPT\n14.target1shutdown socket1\n15.target1关闭socket1" sub module: TCP summary: STA mode, close for different types of TCP sockets test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0104 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h B - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h W - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h R - ['R SSC1 RE SHUTDOWN:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept OK 4.OK 5.OK 6.OK,pc tcp server accept OK 7.OK 8.OK 9.OK,pc tcp server accept OK 10.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1. PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 4.target1 shutdown socket1 B 5.target1上创建TCP socket 6.target1上使用步骤5创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 7.target1 shutdown socket2 W 8.target1上创建TCP socket 9.target1上使用步骤8创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 10.target1 shutdown socket3 R' sub module: TCP summary: STA mode, shutdown basic test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0107 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC2 CONNECT - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC3 CONNECT - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC4 CONNECT - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC5 CONNECT - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC6 CONNECT - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] comment: '' execution time: 0.0 expected result: '1.+BIND:0，OK,0.0.0.0 2.OK 3.OK,pc tcp server accept成功 4.OK,pc tcp server accept成功 5.OK,pc tcp server accept成功 6.OK,pc tcp server accept成功 7.OK,pc tcp server accept成功' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: "1.target1上创建TCP socket 端口随机\n2.target1上使用步骤4创建的socket1，去监听\n3.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket2 \n4.PC CONNECT, ,tcp 连接创建成功，创建socket3\ \ \n5.PC CONNECT, ,tcp 连接创建成功，创建socket4 \n6.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket5 \n7.PC CONNECT, ,tcp 连接创建成功，创建socket6" sub module: TCP summary: STA mode, accept max TCP client by server test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0106 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4 OK 5.OK,pc tcp server accept成功 6.OK 7.OK,pc tcp server accept成功 8 OK 9.OK,pc tcp server accept成功 10.OK 11.OK,pc tcp server accept成功' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket1 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 4.target1上创建TCP socket2 5.target1上使用步骤4创建的socket2，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 6.target1上创建TCP socket3 7.target1上使用步骤6创建的socket3，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 8.target1上创建TCP socket4 9.target1上使用步骤8创建的socket4，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 10.target1上创建TCP socket5 11.target1上使用步骤10创建的socket5，去连接 PC的ip，test_tcp_port1,PC有ACCEPT' sub module: TCP summary: STA mode, create max TCP sockets test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0210 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - WIFI CONN2 192.168.4.2 - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - SSC SSC1 ap -L - [R SSC1 C 192.168.4.2 C 192.168.4.3 P P ] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4. succeed 5. find target2 and PC' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: TCPIP steps: '1. config softap to a random ssid 2. target2 connect to target1 softap 3. disable DHCP server, do config and enable 4. PC NIC connect to target1 softap try to renew IP 192.168.4.2 5. softap list connected station' sub module: DHCP summary: dhcp server reconfig, old client able to get IP (discover with requested IP) test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0211 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - WIFI CONN 192.168.4.2 - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - DELAY 10 - [''] - - SSC SSC1 ap -L - [R SSC1 C 192.168.4.2 C 192.168.4.3 P P ] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4. succeed 5. find target2 and PC' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: TCPIP steps: '1. config softap to a random ssid 2. target2 connect to target1 softap 3. disable DHCP server, do config and enable 4. PC NIC connect to target1 softap try to renew IP 192.168.4.2 5. softap list connected station' sub module: DHCP summary: dhcp server reconfig, old client able to renew IP (direct send request) test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0212 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP -i - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP -i - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC2 CONNECT 0 - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] - - SSC SSC1 soc -I - ['P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(,,,)', 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d,.+,\d+"%%(,)', 'P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(,,,)'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4.OK 5.OK 6.OK 7.OK 8.OK 9.PC OK, target1 +ACCEPT:3,2,,port 10.+SOCINFO:,,, +SOCINFO:,,, +SOCINFO:, +SOCINFO:,,, +SOCINF0ALL' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1,PC有ACCEPT\n4.target1上创建TCP socket2,本地ip target_ip\n5.target1上使用步骤4创建的socket2，去连接\ \ PC的ip，test_tcp_port1,PC有ACCEPT\n6.target1 shutdown socket2 \n7.target1上创建TCP\ \ socket3,本地端口random_port\n8.target1上使用步骤7创建的socket3，去监听\n9.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket4 \n10.target1 查询the socket information" sub module: TCP summary: AP mode, get active socket info test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0210 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 soc -W -s -o 0 - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC2 SEND 146000 - [P SOC_COM R *] - - SSC SSC1 soc -W -s -o 1 - ['P SSC1 RE WORKTHREAD:\d+,OK', P SSC1 SL +2920] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4.OK 6.OK 7.收到 146000 数据 ' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1. PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 4.PC与target1 创建好TCP 连接，有ACCEPT 5.target停止调用recv 6.PC send 100 * 1460 data to 8266, 7.target重新调用recv' sub module: TCP summary: AP mode, recv buffer test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0210 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 soc -W -s -o 0 - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC2 SEND 146000 - [P SOC_COM R *] - - SSC SSC1 soc -W -s -o 1 - ['P SSC1 RE WORKTHREAD:\d+,OK', P SSC1 SL +2920] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4.OK 6.OK 7.收到 146000 数据' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1. PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 4.PC与target1 创建好TCP 连接，有ACCEPT 5.target停止调用recv 6.PC send 100 * 1460 data to 8266, 7.target重新调用recv' sub module: TCP summary: AP mode, recv buffer test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0212 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP -i - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP -i - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC2 CONNECT 0 - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] - - SSC SSC1 soc -I - ['P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(,,,)', 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d,.+,\d+"%%(,)', 'P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(,,,)'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4.OK 5.OK 6.OK 7.OK 8.OK 9.PC OK, target1 +ACCEPT:3,2,,port 10.+SOCINFO:,,, +SOCINFO:,,, +SOCINFO:, +SOCINFO:,,, +SOCINF0ALL' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1,PC有ACCEPT\n4.target1上创建TCP socket2,本地ip target_ip\n5.target1上使用步骤4创建的socket2，去连接\ \ PC的ip，test_tcp_port1,PC有ACCEPT\n6.target1 shutdown socket2 \n7.target1上创建TCP\ \ socket3,本地端口random_port\n8.target1上使用步骤7创建的socket3，去监听\n9.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket4 \n10.target1 查询the socket information" sub module: TCP summary: AP mode, get active socket info test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0211 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - WIFI CONN 192.168.4.2 - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - DELAY 10 - [''] - - SSC SSC1 ap -L - [R SSC1 C 192.168.4.2 C 192.168.4.3 P P ] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4. succeed 5. find target2 and PC' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: TCPIP steps: '1. config softap to a random ssid 2. target2 connect to target1 softap 3. disable DHCP server, do config and enable 4. PC NIC connect to target1 softap try to renew IP 192.168.4.2 5. softap list connected station' sub module: DHCP summary: dhcp server reconfig, old client able to renew IP (direct send request) test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0210 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - WIFI CONN2 192.168.4.2 - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - SSC SSC1 ap -L - [R SSC1 C 192.168.4.2 C 192.168.4.3 P P ] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4. succeed 5. find target2 and PC' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: TCPIP steps: '1. config softap to a random ssid 2. target2 connect to target1 softap 3. disable DHCP server, do config and enable 4. PC NIC connect to target1 softap try to renew IP 192.168.4.2 5. softap list connected station' sub module: DHCP summary: dhcp server reconfig, old client able to get IP (discover with requested IP) test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_ADDR_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 mac -S -o 1 -m 44:55:66:77:88:99 - ['R SSC1 C +MAC:STA,OK'] - - SSC SSC1 mac -S -o 2 -m 22:33:44:55:66:77 - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 mac -Q -o 3 - ['R SSC1 C +STAMAC:44:55:66:77:88:99 C +APMAC:22:33:44:55:66:77'] - - SSC SSC1 mac -S -o 1 -m - ['R SSC1 C +MAC:STA,OK'] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.ok 3.ok 4.ok 5.ok 6.ok' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: "1.target1 设置mode 为sta+softAP mode\n2.target1 设置sta mode 下的mac \n3.target1\ \ 设置softAP mode 下的mac\n4.target1 查询softAP+sta 下的mac\n5.target1 设置sta mode 下的mac\ \ 为target1_mac\n6.target1 设置softAP mode 下的mac 为target1_ap_mac\n" sub module: MAC Address summary: set mac, query mac test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: mac address function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_ADDR_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 mac -S -o 2 -m 44:55:66:77:88:99 - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC1 ap -S -s -p -t - [''] - - SSC SSC2 sta -S -b 44:55:66:77:88:99 - ['R SSC2 RE \+SCAN:.+,44:55:66:77:88:99,'] - - SSC SSC1 mac -S -o 2 -m - ['R SSC1 C +MAC:AP,OK'] - - SSC SSC2 mac -Q -o 1 - ['R SSC2 A :\+STAMAC:(.+)\r\n'] - - SSC SSC2 mac -S -o 1 -m 22:33:44:55:66:77 - ['R SSC2 C +MAC:STA,OK'] - - SSC SSC2 sta -C -s -p - ['P SSC2 C +JAP:CONNECTED'] - - SSC SSC1 ap -L - ['R SSC1 C +LSTA:22:33:44:55:66:77'] - - SSC SSC2 mac -S -o 1 -m - ['R SSC2 C +MAC:STA,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.ok 3.ok 4.ok 5.ok 6.ok 7.ok 8.ok 9.ok' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: "1.target1 设置sta mode下的mac 44:55:66:77:88:99\n2.target1下设置ssid 和pwd 加密方式\n\ 3.target2 查询mac为44:55:66:77:88:99的ssid\n4.target1 设置sta mode下的mac target_ap_mac\n\ 5.target2 查询sta mode 下的mac 为target2_mac_tmp\n6.target2 设置sta mode 下的mac 为22:33:44:55:66:77\n\ 7.target2 jap target1\n8.target1 查询连接到的sta \n9.target2 设置sta mode 下的mac 为 target2_mac\n" sub module: MAC Address summary: set mac and do scan/JAP/SAP test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: mac address function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0202 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -W -s -o 0 - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.PC OK 5.PC OK 6.PC OK 7.PC OK 8.PC OK SOC_CLOSE=SOC1' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上关闭工作线程 4.PC往8266上发送1472字节数据 5.PC往8266上发送1472字节数据 6.PC往8266上发送1472字节数据 7.PC往8266上发送1472字节数据 8.PC往8266上发送1472字节数据' sub module: UDP summary: AP mode, recv buffer test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: use UDP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0411 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,ERROR'] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.ERROR 7.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket1 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 4.PC与target1创建好TCP 连接，有ACCEPT 5.target1上创建TCP socket2 6.8266往PC socket2上发送5字节数据 7.8266往PC socket1上发送5字节数据' sub module: TCP summary: do TCP send after socket changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0301 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t -h 0 -m 8 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 ap -Q - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,3,0,8,\d+"%%(,)'] comment: '' execution time: 0.0 expected result: '1. target1 set AP 2.target 1上查询到跟设置AP时一致 ' initial condition: APM1 initial condition description (auto): AP mode, DHCP on, will autogen a TC with initial condition APSTA1 module: WIFI MAC steps: '1. target1 set AP 2.target 1上查询到跟设置AP时一致 ' sub module: WIFI Connect summary: AP config query test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: query AP config version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_IP_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 ip -S -o 2 -i 192.168.123.123 - ['R SSC1 C +IP:ERROR'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 ip -S -o 2 -i 192.168.123.123 - ['R SSC1 C +IP:OK'] - - SSC SSC1 ip -Q -o 2 - ['R SSC1 C +APIP:192.168.123.123'] - - SSC SSC1 ip -S -o 2 -i - ['R SSC1 C +IP:OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.ERROR 3.OK 4.OK 5.APIP:192.168.123.123 6.OK' initial condition: APSTA1 initial condition description (auto): testing ap on sta + ap mode (autogen by APM1) module: TCPIP steps: "1.target1 打开DHCP 2\n2.target1 设置softAP ip 192.168.123.123\n4.target1 关闭DHCP\ \ 2\n5.target1 设置softAP ip 192.168.123.123\n6.target1 查询 当前sta ip \n7.target1\ \ 设置softAP ip 为target_ap_ip" sub module: IP summary: ap set and query static ip test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: set and query static IP version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0105 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.关闭socket1' sub module: UDP summary: STA mode, close UDP sockets test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0104 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SOC SOC1 SENDTO 1 - [R SSC1 SL +1] - - SOC SOC1 SENDTO 1472 - ['R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(,,)'] - - SOC SOC1 SENDTO 1473 - [P SSC1 NC +RECVFROM, P SOC_COM C OK] - - SOC SOC2 BIND - [R SOC_COM L OK] - - SOC SOC2 SENDTO 1472 - ['R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(,,)'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK,没收到UDP包 6.OK 7.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.PC往8266上发送1字节数据 4.PC往8266上发送1472字节数据 5.PC往8266上发送1473字节数据 6.PC上SOC2 UDP传输，bing 7.PC往8266上发送1472字节数据' sub module: UDP summary: STA mode, recvfrom basic test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0107 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -I - ['P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(,)'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上查询创建socket信息' sub module: UDP summary: STA mode, get active socket info test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0106 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] comment: '' execution time: 0.0 expected result: '1.ok 2.ok 3.ok 4.ok 5.ok' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上UDP传输，Bind socket2,本地ip target_udp_port2 3.target1上UDP传输，Bind socket3,本地ip target_udp_port3 4.target1上UDP传输，Bind socket4,本地ip target_udp_port4 5.target1上UDP传输，Bind socket5,本地ip target_udp_port5' sub module: UDP summary: STA mode, create max udp socket test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 C BIND:ERROR'] - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 RE BIND:(\d+),OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.ERROR 4.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上UDP传输，Bind socket2,本地ip 0.0.0.0 target_udp_port2 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 4.target1上创建TCP socket3, target_udp_port1' sub module: UDP summary: STA mode, udp bind test. use different ip, port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 1 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1] - - SSC SSC1 soc -S -s -i -p -l 1472 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1472] - - SSC SSC1 soc -S -s -i -p -l 1473 - ['P SSC1 RE SEND:(\d+),OK', P SOC_COM NC SOC_RECVFROM] - - SSC SSC1 soc -S -s -i -p -l 1472 -n 10 -j 20 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 14720] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK,没有到UDP包 6.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1字节数据 4.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472字节数据 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1473字节数据 6.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472*10字节数据' sub module: UDP summary: STA mode, sendto test with different length test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SOC SOC2 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 10 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 10] - - SSC SSC1 soc -S -s -i -p -l 10 - ['P SSC1 RE SEND:(\d+),OK', P SOC2 UL 10] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.PC上SOC2 UDP传输，bing 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 4.target1上使用步骤3创建的socket1，往pc_ip，test_tcp_port1上发送10字节数据 5.target1上使用步骤3创建的socket1，往pc_ip2，test_tcp_port2上发送10字节数据' sub module: UDP summary: STA mode, sendto test. use different ip, port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC2 sta -C -s -p - [''] - - DELAY 20 - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] comment: '' execution time: 0.0 expected result: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target\ \ 1,FAIL \n4.target1 打开DHCP OK\n5.target2 jap target 1,ok" initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: TCPIP steps: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target 1,FAIL \n\ 4.target1 打开DHCP OK\n5.target2 jap target 1,ok" sub module: DHCP summary: dhcp server function test test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP client function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 3 - ['R SSC1 C +DHCP:AP,OK C +DHCP:STA,OK'] - - SSC SSC1 dhcp -Q -o 3 - ['R SSC1 C +DHCP:STA,STARTED C +DHCP:AP,STARTED'] - - SSC SSC1 dhcp -Q -o 1 - ['R SSC1 C +DHCP:STA,STARTED NC +DHCP:AP,STARTED'] - - SSC SSC1 dhcp -Q -o 2 - ['R SSC1 NC +DHCP:STA,STARTED C +DHCP:AP,STARTED'] - - SSC SSC1 dhcp -E -o 3 - ['R SSC1 C +DHCP:AP,OK C +DHCP:STA,OK'] - - SSC SSC1 dhcp -Q -o 3 - ['R SSC1 C +DHCP:STA,STOPPED C +DHCP:AP,STOPPED'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.STA&AP STARTED 4.STA STARTED 5.AP STARTED 6.OK 7.STA&AP STOPPED' initial condition: STAAP1 initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen by STAM1) module: TCPIP steps: '1.target1 设置mode 为sta+softAP mode 2.target1 打开DHCP 3 3.target1 查询DHCP 状态 4.target1 查询sta DHCP 状态 5.target1 查询softAP DHCP 状态 6.target1 关闭 DHCP 3 7.target1 查询 DHCP 状态' sub module: DHCP summary: dhcp status query test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP client function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0801 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 0 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 ap -S -s -p -t 2 - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,2,0'] - - SSC SSC1 ap -S -s -p -t 3 - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,3,2'] - - SSC SSC1 ap -S -s -p -t 4 - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,4,3'] - - SSC SSC1 ap -S -s -p -t 0 - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,0,4'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. auth change event old mode 0 new mode 2 4. auth change event old mode 2 new mode 3 5. auth change event old mode 3 new mode 4 6. auth change event old mode 4 new mode 0' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: '1. set target1 softap auth mode 0 2. target2 connect to target1 3. set target1 softap auth mode 2, wait sta connected 4. set target1 softap auth mode 3, wait sta connected 5. set target1 softap auth mode 4, wait sta connected 6. set target1 softap auth mode 0, wait sta connected' sub module: WIFI Connect summary: test auth change event test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: wifi auth changed event test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0108 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 C BIND:ERROR'] - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 RE BIND:(\d+),OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.ERROR 4.OK' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上UDP传输，Bind socket2,本地ip 0.0.0.0 target_udp_port2 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 4.target1上创建TCP socket3, target_udp_port1' sub module: UDP summary: AP mode, udp bind test. use different ip, port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0104 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t -m 1 - ['R SSC1 C +SAP:OK'] - - WIFI DISCONN - ['R PC_COM C +WIFIDISCONN:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - WIFI CONN - ['R PC_COM C +WIFICONN:ERROR'] comment: '' execution time: 0.0 expected result: '1. target1 set AP,set max allowed sta as 1 2. use PC disconnect, 3.target 2 jap succeed 4.PC WIFI can not CONN' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1.target1下设置ssid 和pwd 加密方式,set max allowed sta as 1 2.use PC disconnect target1 3.target 2 jap target1 4.PC WIFI CONNECT target1' sub module: WIFI Connect summary: station SAP test, max allowed sta test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: SAP/JAP with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_IGMP_0201 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p - ['R SSC1 A :\+BIND:(\d+),OK'] - - SOC SOC1 BIND - [R SOC_COM L OK] - - SOC SOC1 SENDTO 1 224.1.1.1 - [R SSC1 SL +1] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. able to recv packet' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1. join group 2. create UDP socket using multicast addr 3. PC send UDP packet to multicast addr' sub module: IGMP summary: station IGMP recv packets test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP send/recv test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_IGMP_0203 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p - ['R SSC1 A :BIND:(\d+),OK'] - - SOC SOC1 BIND - [R SOC_COM L OK] - - SOC SOC1 SENDTO 1 224.1.1.1 - [R SSC1 SL +1] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. able to recv packet' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1. join group 2. create UDP socket using multicast addr 3. PC send UDP packet to multicast addr' sub module: IGMP summary: softAP IGMP recv packets test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP send/recv test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_IGMP_0202 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC2 op -S -o 1 - ['R SSC2 C +MODE:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p - ['R SSC1 A :\+BIND:(\d+),OK'] - - SSC SSC2 soc -B -t UDP -p - ['R SSC2 A :\+BIND:(\d+),OK'] - - SSC SSC2 soc -S -s -i 224.1.1.1 -p -l 10 - [R SSC1 SL +1] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4. target1 recv multicast packet' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1. target2 set to sta mode and join AP 2. target1 join group and create UDP socket using multicast addr 3. target2 create UDP socket 4. target2 send to multicast addr' sub module: IGMP summary: station send multicast packets test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP send/recv test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_IGMP_0204 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p - ['R SSC1 A :\+BIND:(\d+),OK'] - - SSC SSC2 soc -B -t UDP -p - ['R SSC2 A :\+BIND:(\d+),OK'] - - SSC SSC2 soc -S -s -i 224.1.1.1 -p -l 10 - [R SSC1 SL +1] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4. target1 recv multicast packet' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: TCPIP steps: '1. target2 join SoftAP 2. target1 join group and create UDP socket using multicast addr 3. target2 create UDP socket 4. target2 send to multicast addr' sub module: IGMP summary: softAP send multicast packets test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP send/recv test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0301 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t -h 0 -m 8 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 ap -Q - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,3,0,8,\d+"%%(,)'] comment: '' execution time: 0.0 expected result: '1. target1 set AP 2.target 1上查询到跟设置AP时一致' initial condition: APSTA1 initial condition description (auto): testing ap on sta + ap mode (autogen by APM1) module: WIFI MAC steps: '1. target1 set AP 2.target 1上查询到跟设置AP时一致' sub module: WIFI Connect summary: AP config query test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: query AP config version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0114 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -I - ['P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(,)'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上查询创建socket信息' sub module: UDP summary: AP mode, get active socket info test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0111 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC2 ip - ['R SSC2 A :STAIP:(.+)\r\n'] - - SSC SSC2 soc -B -t UDP -p - ['R SSC2 A :BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SOC SOC1 SENDTO 5 - ['R SSC1 RE "RECVFROM:%%s,5,%%s,%%u"%%(,,)'] - - SSC SSC2 soc -S -s -i -p -l 5 - ['R SSC1 RE "RECVFROM:%%s,5,%%s,%%u"%%(,,)'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK,没收到UDP包 6.OK 7.OK' initial condition: T2O_1 initial condition description (auto): same as T2_1 but will NOT autogen a TC with initial condition T2_2 module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.PC往8266上发送1字节数据 4.PC往8266上发送1472字节数据 5.PC往8266上发送1473字节数据 6.PC上SOC2 UDP传输，bing 7.PC往8266上发送1472字节数据' sub module: UDP summary: AP mode, recvfrom basic test test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0110 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 1 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1] - - SSC SSC1 soc -S -s -i -p -l 1472 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1472] - - SSC SSC1 soc -S -s -i -p -l 1473 - ['P SSC1 RE SEND:(\d+),OK', P SOC_COM NC SOC_RECVFROM] - - SSC SSC1 soc -S -s -i -p -l 1472 -n 10 -j 20 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 14720] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK,没收到UDP包 6.OK' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1字节数据 4.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472字节数据 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1473字节数据 6.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472*10字节数据' sub module: UDP summary: AP mode, sendto test with different length test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0113 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 RE BIND:(\d+),OK'] comment: '' execution time: 0.0 expected result: '1.ok 2.ok 3.ok 4.ok 5.ok' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上UDP传输，Bind socket2,本地ip target_udp_port2 3.target1上UDP传输，Bind socket3,本地ip target_udp_port3 4.target1上UDP传输，Bind socket4,本地ip target_udp_port4 5.target1上UDP传输，Bind socket5,本地ip target_udp_port5' sub module: UDP summary: AP mode, create max udp socket test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0112 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.关闭socket1' sub module: UDP summary: AP mode, close UDP sockets test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0501 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC2 sta -R -r 1 - ['R SSC2 C +RECONN:OK'] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - DELAY 10 - [''] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - DELAY 15 - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 sta -R -r 0 - ['R SSC2 C +RECONN:OK'] - - SSC SSC2 sta -R -r 2 - ['R SSC2 C +RECONN:0'] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - DELAY 10 - [''] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - DELAY 15 - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] - - SSC SSC2 sta -R -r 1 - ['R SSC2 C +RECONN:OK'] comment: '' execution time: 0.0 expected result: '1.设置reconn,开启（此功能不需要重启系统） 2.target1 set AP 3.target2 JAP target1 成功 4.target2 断开target1 连接 5.等待10s，target2 自动重连target1 6.成功 7.查询reconn状态，关闭 8.修改mode 成功 9.等待15s，target2 不会自动重连target1' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: "1.设置reconn,开启（此功能不需要重启系统）\n2.target1下设置ssid 和pwd 加密方式\n3.target2 JAP target1\ \ \n4.target1 修改mode 为sta mode\n5.等待10s，target1 修改mode 为softAP mode\n6.设置reconn，关闭\n\ 7.查询reconn状态，关闭\n8.target1 修改mode 为sta mode\n9.等待15s，target1 修改mode 为softAP mode" sub module: WIFI Connect summary: reconnect policy test test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: reconnect policy test version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0502 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 sta -R -r 1 - ['R SSC2 C +RECONN:OK'] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - DELAY 5 - ['R SSC2 C +JAP:DISCONNECTED'] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - DELAY 10 - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:OK'] - - DELAY 10 - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] comment: '' execution time: 0.0 expected result: '1.target1 set AP 2.target2 jap target 1 3.设置reconn,开启（此功能不需要重启系统） 4.target2 断开target1 连接 5.等待10s，target2 自动重连target1 6.target2 断开target1 连接' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1.target1下设置ssid 和pwd 加密方式 2.target2 jap target 1 3.设置reconn,开启（此功能不需要重启系统） 4.target2 断开target1 连接 5.等待10s，target2 自动重连target1 6.target2 断开target1 连接' sub module: WIFI Connect summary: will not do reconnect after manually disconnected test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: reconnect policy test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0401 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -R -a 0 - ['R SSC1 C +AUTORECONN:OK'] - - SSC SSC1 sta -R -a 2 - ['R SSC1 C +AUTORECONN:0'] - - SSC SSC1 reboot - [''] - - DELAY 15 - [''] - - SSC SSC1 sta -Q - ['R SSC1 C JAP:DISCONNECTED'] - - SSC SSC1 sta -R -a 1 - ['R SSC1 C +AUTORECONN:OK'] - - SSC SSC1 sta -R -a 2 - ['R SSC1 C +AUTORECONN:1'] - - SSC SSC1 reboot - ['R SSC1 C +JAP:CONNECTED'] comment: '' execution time: 0.0 expected result: '1.设置autoreconn,关闭 2.查询当前autoreconn状态是否关闭 3.重启系统，等待15s 4.查询target1 未自动重连AP 5.设置autoreconn,开启 6.查询当前autoreconn状态是否开启 7.系统重启后target1 自动重连AP' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: WIFI MAC steps: '1.设置autoreconn,关闭 2.查询当前autoreconn状态是否关闭 3.重启系统，等待15s 4.查询target1 未自动重连AP 5.设置autoreconn,开启 6.查询当前autoreconn状态是否开启 7.系统重启后target1 自动重连AP' sub module: WIFI Connect summary: auto reconnect test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: power on auto reconnect test version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_MODE_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 dhcp -S -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC2 sta -S - [R SSC2 NP C +SCANDONE] - - SSC SSC1 sta -D - ['R SSC1 C +QAP:OK'] comment: '' execution time: 0.0 expected result: '1.target1下设置ssid 和pwd 、加密方式成功 2.修改target 1的mode 为sta mode 3.target1的dhcp打开 4.target1成功连接上AP 5.target2上不能查询到target_ssid 6.target1断开AP' initial condition: T2O_1 initial condition description (auto): same as T2_1 but will NOT autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1.target1下设置ssid 和pwd 加密方式 2.修改target1的mode 为sta mode 3.target1的dhcp打开 4.target1连接AP 5.target2查询target_ssid 6.target1断开AP' sub module: WIFI Mode summary: mode switch test (sta mode) test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: wifi mode fucntion version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_MODE_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 op -S -o 3 - ['R SSC1 C +MODE:OK'] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -S -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 sta -C -s -p - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC2 sta -S - [R SSC2 P , R SSC2 C +SCANDONE] comment: '' execution time: 0.0 expected result: '1.target1 change to AP mode 2.target1 set AP 3.target 1 的dhcp 打开 4.target 1 成功连接上AP 5.target 2 上查询到target_ssid' initial condition: T2O_1 initial condition description (auto): same as T2_1 but will NOT autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1.target1 change to AP mode 2.target1下设置ssid 和pwd 加密方式 3.target1 的dhcp 打开 4.target1 连接AP 5.target2 上查询target_ssid' sub module: WIFI Mode summary: mode switch test (STA+AP mode) test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: wifi mode fucntion version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_MODE_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S - [R SSC2 P , R SSC2 C +SCANDONE] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:ERROR'] - - SSC SSC1 sta -D - ['R SSC1 C +QAP:ERROR'] comment: '' execution time: 0.0 expected result: '1. target1 set AP 2.target 2 上查询到target_ssid 3. target1 can''t join AP 4. target1 can''t QAP' initial condition: T2O_1 initial condition description (auto): same as T2_1 but will NOT autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1.target1下设置ssid 和pwd 加密方式 2.target 2 上查询target_ssid 3.target1 join AP 4.target1 DISCONN AP' sub module: WIFI Mode summary: mode switch test (AP mode) test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: wifi mode fucntion version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0904 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 3 -m 1 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p 1234567890 - ['R SSC2 C +JAP:DISCONNECTED,1,204'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:OK'] - - WIFI CONN - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:DISCONNECTED,1,5'] - - WIFI DISCONN - [P PC_COM C OK, 'R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 ap -S -s -p -t 3 -m 1 - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:DISCONNECTED,5,4'] comment: '' execution time: 0.0 expected result: '1. succeed 2. disconnect event REASON_HANDSHAKE_TIMEOUT 3. succeed 4. succeed 5. disconnect event REASON_ASSOC_TOOMANY 6. succeed, target2 connect succeed 7. disconnect event REASON_ASSOC_EXPIRE' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: '1. config target1 softap max sta allowed 1 2. target2 connect to target1 with wrong password 3. target2 disconnect 4. PC WIFI NIC connect to target1 5. target2 connect to target1 with correct password 6. PC WIFI NIC disconnect 7. reconfig softap' sub module: WIFI Connect summary: test wifi disconnect reason REASON_ASSOC_TOOMANY, REASON_HANDSHAKE_TIMEOUT, REASON_ASSOC_EXPIRE test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: wifi disconnect reason test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0901 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: basic function auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:CONNECTED'] - - SSC SSC1 sta -D - ['R SSC1 C +JAP:DISCONNECTED,0,8'] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:DISCONNECTED,2,15'] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:DISCONNECTED,1,201'] comment: '' execution time: 0.0 expected result: '1. disconnect event reason REASON_ASSOC_LEAVE 2. disconnect event reason REASON_4WAY_HANDSHAKE_TIMEOUT 3. disconnect event reason REASON_NO_AP_FOUND' initial condition: STAAP1 initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen by STAM1) module: WIFI MAC steps: '1. sta connect to AP, and disconnect 2. connect to AP with wrong password 3. connect to AP not exist' sub module: WIFI Connect summary: test wifi disconnect reason REASON_ASSOC_LEAVE, REASON_4WAY_HANDSHAKE_TIMEOUT, REASON_NO_AP_FOUND test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: wifi disconnect reason test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0201 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [SOCR SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h B - ['P SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.ok 2.OK 3.ERROR 4.OK 5.OK 6.ERROR 7.OK 8.OK 9.OK 10.OK 11.OK 12.ERROR' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, 3.target1上使用步骤2创建的socket，去连接 PC的ip， 4.target1上创建TCP socket 5.target1上使用步骤4创建的socket,创建TCP 监听 6.target1上使用步骤4创建的socket，去连接 PC的ip， 7.target1上创建TCP socket 8.target1上使用步骤7创建的socket，去连接 PC的ip， 9.target1上关闭步骤7创建的socket 10.target1上使用步骤7创建的socket，去连接 PC的ip， 11.target1上关闭所有创建的socket 12.target1上使用步骤2创建的socket，去连接 PC的ip，' sub module: TCP summary: STA mode, connect test. use socket in state that can't connect test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0206 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP -i - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP -i - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC2 CONNECT - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] - - SSC SSC1 soc -I - ['P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(,,,)', 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d,.+,\d+"%%(,)', 'P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(,,,)'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4.OK 5.OK 6.OK 7.OK 8.OK 9.PC OK, target1 +ACCEPT:3,2,,port 10.+SOCINFO:,,, +SOCINFO:,,, +SOCINFO:, +SOCINFO:,,, +SOCINF0ALL' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1,PC有ACCEPT\n4.target1上创建TCP socket2,本地ip target_ip\n5.target1上使用步骤4创建的socket2，去连接\ \ PC的ip，test_tcp_port1,PC有ACCEPT\n6.target1 shutdown socket2 \n7.target1上创建TCP\ \ socket3,本地端口random_port\n8.target1上使用步骤7创建的socket3，去监听\n9.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket4 \n10.target1 查询the socket information" sub module: TCP summary: STA mode, get active socket info test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0207 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [SOCR SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h B - ['P SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.ok 2 OK 3.ERROR 4.OK 5.OK 6.ERROR 7.OK 8.OK 9.OK 10.OK 11.OK 12.ERROR' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, 3.target1上使用步骤2创建的socket，去连接 PC的ip， 4.target1上创建TCP socket 5.target1上使用步骤4创建的socket,创建TCP 监听 6.target1上使用步骤4创建的socket，去连接 PC的ip， 7.target1上创建TCP socket 8.target1上使用步骤7创建的socket，去连接 PC的ip， 9.target1上关闭步骤7创建的socket 10.target1上使用步骤7创建的socket，去连接 PC的ip， 11.target1上关闭所有创建的socket 12.target1上使用步骤2创建的socket，去连接 PC的ip，' sub module: TCP summary: AP mode, connect test. use socket in state that can't connect test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0501 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - STRING ether%20src%20%%s%20or%20ether%20dst%20%%s - [R PC_COM C OK] - - NIC NIC1 START capture+block_ip - ['R PC_COM C +NIC_START:OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - [''] - - DELAY 10 - ['R SSC1 RE CONNECT:\d+,ERROR'] comment: '' execution time: 0.0 expected result: 2. connect failed, no exception initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1. PC do not reply any IP packet on NIC 2. target try to connect to TCP server with PC NIC IP' sub module: TCP summary: PC do not reply TCP SYN of target test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP connect and disconnect abnormal case version: v1 (2015-8-15) - CI ready: 'Yes' ID: ^TCPIP_DNS_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -H -d iot.espressif.cn - ['R SSC1 C +HOSTIP:OK,115.29.202.58'] comment: '' execution time: 0.0 expected result: 1.OK initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: 1. get host name "espressif.cn" sub module: DNS summary: get host by name test test environment: SSC_T1_2 test environment description (auto): 'Able to access WAN after connect to AP. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DNS function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DNS_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -H -d iot.espressif.cn - ['R SSC1 A :\+HOSTIP:OK,(.+)\r\n'] - - SSC SSC1 soc -B -t UDP - ['R SSC1 A :\+BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p 9003 -l 10 - ['P SSC1 RE \+SEND:\d+,OK', P SSC1 SL +10] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1. get host name "espressif.cn" 2. sendto, recvfrom1. get host name "espressif.cn" 2. sendto, recvfrom' sub module: DNS summary: UDP send to iot.expressif.com test environment: SSC_T1_2 test environment description (auto): 'Able to access WAN after connect to AP. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DNS function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DNS_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -H -d iot.espressif.cn - ['R SSC1 A :\+HOSTIP:OK,(.+)\r\n'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :\+BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p 9001 - ['R SSC1 RE \+CONNECT:\d+,OK'] - - SSC SSC1 soc -S -s -l 10 - ['P SSC1 RE \+SEND:\d+,OK', P SSC1 SL +10] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1. get host name "espressif.cn" 2. connect, send, recv1. get host name "espressif.cn" 2. connect, send, recv' sub module: DNS summary: TCP connect to iot.espressif.com test environment: SSC_T1_2 test environment description (auto): 'Able to access WAN after connect to AP. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DNS function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0106 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4 OK 5.OK,pc tcp server accept成功 6.OK 7.OK,pc tcp server accept成功 8 OK 9.OK,pc tcp server accept成功 10.OK 11.OK,pc tcp server accept成功' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket1 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 4.target1上创建TCP socket2 5.target1上使用步骤4创建的socket2，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 6.target1上创建TCP socket3 7.target1上使用步骤6创建的socket3，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 8.target1上创建TCP socket4 9.target1上使用步骤8创建的socket4，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 10.target1上创建TCP socket5 11.target1上使用步骤10创建的socket5，去连接 PC的ip，test_tcp_port1,PC有ACCEPT' sub module: TCP summary: STA mode, create max TCP sockets test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0107 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC2 CONNECT - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC3 CONNECT - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC4 CONNECT - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC5 CONNECT - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC6 CONNECT - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] comment: '' execution time: 0.0 expected result: '1.+BIND:0，OK,0.0.0.0 2.OK 3.OK,pc tcp server accept成功 4.OK,pc tcp server accept成功 5.OK,pc tcp server accept成功 6.OK,pc tcp server accept成功 7.OK,pc tcp server accept成功' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: "1.target1上创建TCP socket 端口随机\n2.target1上使用步骤4创建的socket1，去监听\n3.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket2 \n4.PC CONNECT, ,tcp 连接创建成功，创建socket3\ \ \n5.PC CONNECT, ,tcp 连接创建成功，创建socket4 \n6.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket5 \n7.PC CONNECT, ,tcp 连接创建成功，创建socket6\ \ " sub module: TCP summary: STA mode, accept max TCP client by server test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0104 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h B - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h W - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h R - ['R SSC1 RE SHUTDOWN:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept OK 4.OK 5.OK 6.OK,pc tcp server accept OK 7.OK 8.OK 9.OK,pc tcp server accept OK 10.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1. PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 4.target1 shutdown socket1 B 5.target1上创建TCP socket 6.target1上使用步骤5创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 7.target1 shutdown socket2 W 8.target1上创建TCP socket 9.target1上使用步骤8创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 10.target1 shutdown socket3 R' sub module: TCP summary: STA mode, shutdown basic test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0105 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC2 CONNECT - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK 6.OK 7.target1关闭socket1 8.target1关闭socket2 9.OK 10.OK,pc tcp server accept成功 11.target1关闭socket1 12.OK 13.OK,pc tcp server accept成功 14.OK 15.target1关闭socket1' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1关闭socket1\n\ 4.target1上创建TCP socket 端口随机\n5.target1上使用步骤4创建的socket1，去监听\n6.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket2 \n7.target1关闭socket1\n8.target1关闭socket2\n\ 9.target1上创建TCP socket1\n10.target1上使用步骤10创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT\n\ 11.target1关闭socket1\n12.target1上创建TCP socket1\n13.target1上使用步骤13创建的socket1，去连接\ \ PC的ip，test_tcp_port1,PC有ACCEPT\n14.target1shutdown socket1\n15.target1关闭socket1" sub module: TCP summary: STA mode, close for different types of TCP sockets test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC1 CONNECT - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+', P SOC_COM C OK] - - SOC SOC1 CONNECT - [P SOC_COM C ERROR, P SSC1 NC ACCEPT] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.PC TCP client accept 4.error' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.target1上创建TCP socket，bind到本地端口 2.target1上使用步骤1创建的socket,创建TCP 监听 3.PC TCP 连接到target1 , 4.PC tcp 连接到不存在的port ,' sub module: TCP summary: STA mode, server listen test. use different kinds of port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SOC SOC2 SEND 5 - [R SSC1 SL +5] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 5] - - SOC SOC2 SEND 146000 - [R SSC1 SL +146000] - - SSC SSC1 soc -S -s -l 1460 -n 100 - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 146000] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc上回accept 4.OK 5.target收到5 byte 6.PC收到5 byte 7.target收到 146000 byte 8.OK,PC 回SOC_RECV=SOC2,RECV_LEN=字节数' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1. PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 4.PC与target1 创建好TCP 连接，有ACCEPT 5.PC send 5 bytes to 8266 6.8266 send 5 bytes to PC 7. PC send 100 * 1460 data to 8266, 8.8266 send 100 * 1460 to PC. ' sub module: TCP summary: STA mode, send/recv basic test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [SOCR SOC_COM L OK] - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,OK', P SOC1 C +ACCEPT] - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i 123.456.678.789 -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.ERROR 6.ERROR' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 4.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 5.target1上使用步骤4创建的socket,去连接不存在的ip，test_tcp_port1 6.target1上使用步骤2创建的socket，去连接 PC的ip，远端端口不存在。' sub module: TCP summary: STA mode, connect test. use different ip, port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0116 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC2 CONNECT 0 - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC3 CONNECT 0 - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC4 CONNECT 0 - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC5 CONNECT 0 - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC6 CONNECT 0 - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] comment: '' execution time: 0.0 expected result: '1.+BIND:0，OK,0.0.0.0 2.OK 3.OK,pc tcp server accept成功 4.OK,pc tcp server accept成功 5.OK,pc tcp server accept成功 6.OK,pc tcp server accept成功 7.OK,pc tcp server accept成功' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: "1.target1上创建TCP socket 端口随机\n2.target1上使用步骤4创建的socket1，去监听\n3.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket2 \n4.PC CONNECT, ,tcp 连接创建成功，创建socket3\ \ \n5.PC CONNECT, ,tcp 连接创建成功，创建socket4 \n6.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket5 \n7.PC CONNECT, ,tcp 连接创建成功，创建socket6" sub module: TCP summary: AP mode, accept max TCP client by server test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0114 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC2 CONNECT 0 - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK 6.OK,target1上accept 成功 7.target1关闭socket1 8.target1关闭socket2 9.OK 10.OK,pc tcp server accept成功 11.target1关闭socket1 12.OK 13.OK,pc tcp server accept成功 14.OK 15.target1关闭socket1' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1关闭socket1\n\ 4.target1上创建TCP socket 端口随机\n5.target1上使用步骤4创建的socket1，去监听\n6.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket2 \n7.target1关闭socket1\n8.target1关闭socket2\n\ 9.target1上创建TCP socket1\n10.target1上使用步骤10创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT\n\ 11.target1关闭socket1\n12.target1上创建TCP socket1\n13.target1上使用步骤13创建的socket1，去连接\ \ PC的ip，test_tcp_port1,PC有ACCEPT\n14.target1shutdown socket1\n15.target1关闭socket1" sub module: TCP summary: AP mode, close for different types of TCP sockets test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0115 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4 OK 5.OK,pc tcp server accept成功 6.OK 7.OK,pc tcp server accept成功 8 OK 9.OK,pc tcp server accept成功 10.OK 11.OK,pc tcp server accept成功' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket1 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 4.target1上创建TCP socket2 5.target1上使用步骤4创建的socket2，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 6.target1上创建TCP socket3 7.target1上使用步骤6创建的socket3，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 8.target1上创建TCP socket4 9.target1上使用步骤8创建的socket4，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 10.target1上创建TCP socket5 11.target1上使用步骤10创建的socket5，去连接 PC的ip，test_tcp_port1,PC有ACCEPT' sub module: TCP summary: AP mode, create max TCP sockets test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0112 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SOC SOC2 SEND 5 - [R SSC1 SL +5] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 5] - - SOC SOC2 SEND 146000 - [R SSC1 SL +146000] - - SSC SSC1 soc -S -s -l 1460 -n 100 - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 146000] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4.OK 5.target收到5byte数据 6.PC收到5byte数据 7.target收到146000 byte数据 8.OK,PC 收到146000 byte数据' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1. PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 4.PC与target1 创建好TCP 连接，有ACCEPT 5.PC send 5 bytes to 8266 6.8266 send 5 bytes to PC 7. PC send 100 * 1460 data to 8266, 8.8266 send 100 * 1460 to PC.' sub module: TCP summary: AP mode, send/recv basic test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0113 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h B - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h W - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h R - ['R SSC1 RE SHUTDOWN:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4.OK 5.OK 6.OK,pc tcp server accept成功 7.OK 8.OK 9.OK,pc tcp server accept成功 10.OK' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1. PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 4.target1 shutdown socket1 B 5.target1上创建TCP socket 6.target1上使用步骤5创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 7.target1 shutdown socket2 W 8.target1上创建TCP socket 9.target1上使用步骤8创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 10.target1 shutdown socket3 R' sub module: TCP summary: AP mode, shutdown basic test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0110 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [SOCR SOC_COM L OK] - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,OK', P SOC1 C +ACCEPT] - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i 123.456.678.789 -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.ERROR 6.ERROR' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 4.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 5.target1上使用步骤4创建的socket,去连接不存在的ip，test_tcp_port1 6.target1上使用步骤2创建的socket，去连接 PC的ip，远端端口不存在。' sub module: TCP summary: AP mode, connect test. use different ip, port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0111 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC1 CONNECT 0 - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+', P SOC_COM C OK] - - SOC SOC1 CONNECT 0 - [P SOC_COM C ERROR, P SSC1 NC ACCEPT] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.PC TCP client accept 4.error' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1.target1上创建TCP socket，bind到本地端口 2.target1上使用步骤1创建的socket,创建TCP 监听 3.PC TCP 连接到target1 , 4.PC tcp 连接到不存在的port ,' sub module: TCP summary: AP mode, server listen test. use different kinds of port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_ARP_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - STRING ether%20src%20%%s%20or%20ether%20dst%20%%s - [R PC_COM C OK] - - NIC NIC1 START capture+send+block_arp_ip - ['R PC_COM C +NIC_START:OK'] - - NIC NIC1 SEND ARP arp_op_code "request" arp_target_proto_addr ethernet_dst_addr "ff:ff:ff:ff:ff:ff" - ['P PC_COM C +NIC_SEND:OK', P NIC1 PDU (Ethernet.dst_addr=)(ARP.hw_type="Ethernet")(ARP.protocol="IPv4")(ARP.hw_len="6")(ARP.proto_len="4")(ARP.op_code="reply")(ARP.sender_hw_addr=)(ARP.sender_proto_addr=)(ARP.target_hw_addr=)(ARP.target_proto_addr=)] comment: '' execution time: 0.0 expected result: 1. PC recv target valid ARP reply initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: 1. PC send ARP req to target sub module: ARP summary: PC send valid ARP request to target test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: handling ARP request version: v1 (2015-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0304 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - SSC SSC1 op -S -o 2 - ['P SSC1 C +MODE:OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ 4.修改8266的Mode为softAP mode \n5.关闭建立的socket1连接" sub module: UDP summary: close UDP socket after mode changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0305 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - NIC DISABLED - [R PC_COM C OK] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ 4.PC上网卡禁止掉 \n5.关闭建立的socket1连接" sub module: UDP summary: close UDP socket after PC NIC disabled test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0306 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 - ['P SSC1 C +IP:OK'] - - SSC SSC1 ip -Q -o 1 - ['R SSC1 C +STAIP:192.168.111.210'] - - SSC SSC1 soc -S -s -i -p -l 1 - ['P SSC1 RE SEND:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK 7.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ 4.关闭8266的DHCP 1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.8266往PC上发送5字节数据" sub module: UDP summary: do UDP send after IP changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0307 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 - ['P SSC1 C +IP:OK'] - - SSC SSC1 ip -Q -o 1 - ['R SSC1 C +STAIP:192.168.111.210'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK 7.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ 4.关闭8266的DHCP 1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.关闭建立的socket1连接" sub module: UDP summary: close UDP socket after IP changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0301 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -i -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - SSC SSC1 sta -D - ['P SSC1 C +QAP:OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.ERROR' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据 4.断开与AP 连接 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据' sub module: UDP summary: do UDP send after WIFI disconnected test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0302 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - SSC SSC1 sta -D - ['P SSC1 C +QAP:OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK ' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据 4.断开与AP 连接 5.关闭建立的socket1连接' sub module: UDP summary: "close UDP socket after WIFI \ndisconnected" test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_UDP_0303 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] - - SSC SSC1 op -S -o 2 - ['P SSC1 C +MODE:OK'] - - SSC SSC1 soc -S -s -i -p -l 5 - ['P SSC1 RE SEND:(\d+),OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.ERROR' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ 4.修改8266的Mode为softAP mode \n5.8266往PC上发送5字节数据" sub module: UDP summary: do UDP send after mode changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: UDP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0601 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - WIFI CONN - ['R PC_COM C +WIFICONN:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 ap -L - ['R SSC1 C +LSTA:', 'R SSC1 C +LSTA:', R SSC1 C +LSTADONE] comment: '' execution time: 0.0 expected result: '1.target1 set AP 2.PC WIFI CONNECTED 3.target2 jap target 1 4.查询到两个sta 连接到target1 上' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1. target1下设置ssid 和pwd 加密方式 2.PC WIFI CONNECTED target1 3.target2 jap target 1 4.查询到两个sta 连接到target1 上' sub module: WIFI Connect summary: list stations connected to soft ap test test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: list SoftAP connected station version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0209 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - WIFI CONN 192.168.4.2 - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - DELAY 20 - [''] - - SSC SSC1 ap -L - [R SSC1 C 192.168.4.2 C 192.168.4.3 P P ] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4. succeed 5. find target2 and PC' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: TCPIP steps: '1. config softap to a random ssid 2. target2 connect to target1 softap 3. disable DHCP server, do config and enable 4. PC NIC connect to target1 softap 5. softap list connected station' sub module: DHCP summary: dhcp server reconfig, old client and new client able to get IP test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0208 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['P SSC1 C +DHCP:AP,OK', 'P SSC2 C +JAP:DISCONNECTED'] - - SSC SSC2 sta -D - ['R SSC2 C +JAP:DISCONNECTED'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - WIFI CONN 192.168.4.2 - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - SSC SSC1 ap -L - [R SSC1 C 192.168.4.2 P ] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4. get IP 192.168.4.2 5. can only find target2 with IP 192.168.4.2' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: TCPIP steps: '1. config softap to a random ssid 2. PC NIC connect to target1 softap 3. disable DHCP server, do config and enable 4. target2 connect to target1 softap 5. softap list connected station' sub module: DHCP summary: dhcp server reconfig and new client able to get first IP in pool test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0207 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - WIFI CONN 192.168.4.2 - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - WIFI DISCONN2 - ['R PC_COM NC ERROR C +WIFIDISCONN:OK'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:OK'] - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66 - ['R SSC2 C +MAC:STA,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.2'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. get IP 192.168.4.2 4. succeed 5. succeed 6. get IP 192.168.4.2' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: TCPIP steps: '1. config softap to a random ssid 2. disable DHCP server, do config and enable 3. PC WIFI NIC connect to target1 softap 4. target2 connect to target1 softap and disnnect 5. PC release IP and disconnected 6. target2 change mac and connect to target1' sub module: DHCP summary: dhcp server prefer assign released IP to new client test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0206 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - LOOP 4 4 "['01','02','03','01']" "[2,3,4,2]" - [''] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:OK'] - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s} - ['R SSC2 C +MAC:STA,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.{%s}'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 4. get IP 192.168.4.2 - 192.168.4.4 5. get IP 192.168.4.2' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: TCPIP steps: '1. config softap to a random ssid 2. disable DHCP server, do config and enable 3. target2 change mac, connect to softap, disconnect 4. Loop step3 twice 5. change to first mac, connect to softap' sub module: DHCP summary: dhcp server assign same IP to same MAC when it's not released test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0205 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 -t 1 - ['P SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['P SSC1 C +DHCP:AP,OK', 'P SSC2 C +JAP:DISCONNECTED'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. target2 wifi disconnected' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: TCPIP steps: '1. config softap to a random ssid 2. target2 connect to target1 3. disable DHCP server, do config and enable' sub module: DHCP summary: disconnect STA if config dhcp server test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0204 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 -t 1 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.2'] - - DELAY 90 - [''] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.2'] - - SSC SSC2 sta -D - ['R SSC2 C +JAP:DISCONNECTED'] - - DELAY 60 - [''] - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66 - ['R SSC2 C +MAC:STA,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.2'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. get IP 192.168.4.2 5. succeed 6. succeed 8. get IP 192.168.4.2' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: TCPIP steps: '1. config softap to a random ssid 2. config DHCP timeout as 1 minute 3. target2 connect to target1 4. wait 90 seconds 5. check if target2 IP is same 6. target2 disconnect 7. wait 60s 8. target2 change mac and connect to target1' sub module: DHCP summary: dhcp server timeout test test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0203 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - LOOP 2 4 "['01','02']" "[2,3]" - [''] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:OK'] - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s} - ['R SSC2 C +MAC:STA,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.{%s}'] - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66 - ['R SSC2 C +MAC:STA,OK'] - - DELAY 20 - [''] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:0.0.0.0'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4.1 succeed 4.2 failed' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: TCPIP steps: '1. config softap to a random ssid 2. config DHCP Server on Target1(.4.2 - .4.3) 3. target change mac, connect to Target1 4. Loop step3 twice' sub module: DHCP summary: dhcp server ip pool empty test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0202 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - LOOP 3 4 "['01','02','03']" "[2,3,4]" - [''] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:OK'] - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s} - ['R SSC2 C +MAC:STA,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.{%s}'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3,4: get IP from dhcp pool with correct sequence' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: TCPIP steps: '1. config softap to a random ssid 2. config DHCP Server on Target1 3. target change mac, connect to Target1 4. Loop step3' sub module: DHCP summary: dhcp server ip pool test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0201 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 ip -S -o 2 -i - ['R SSC1 C +IP:OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.1 -e 192.168.4.10 - ['R SSC1 C +DHCP:LEASE,ERROR'] - - SSC SSC1 dhcp -L -s 192.168.4.5 -e 192.168.4.2 - ['R SSC1 C +DHCP:LEASE,ERROR'] - - SSC SSC1 dhcp -L -s 192.168.2.2 -e 192.168.2.5 - ['R SSC1 C +DHCP:LEASE,ERROR'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] comment: '' execution time: 0.0 expected result: '1.target1 关闭DHCP 2 OK 2.target1 设置ip 成功 3.设置dhcp 地址池 OK 4.ERROR 5.ERROR 6.ERROR 7.target1 打开DHCP ok' initial condition: APSTA1 initial condition description (auto): testing ap on sta + ap mode (autogen by APM1) module: TCPIP steps: "1.target1 关闭DHCP 2 \n2.target1 设置ip \n3.设置dhcp 地址池\n4.设置dhcp错误的参数\n5.设置dhcp错误的参数\n\ 6.设置dhcp错误的参数\n7.target1 打开DHCP ok" sub module: DHCP summary: server dhcp lease test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0204 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 soc -W -s -o 0 - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC2 SEND 146000 - [P SOC_COM R *] - - SSC SSC1 soc -W -s -o 1 - ['P SSC1 RE WORKTHREAD:\d+,OK', P SSC1 SL +2920] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc server accept OK 4.OK 5.OK 6.OK 7.target收到146000 byte ' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1. PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 4.PC与target1 创建好TCP 连接，有ACCEPT 5.target上不进行recv 6.PC send 100 * 1460 data to target, 7.在target上开始recv' sub module: TCP summary: STA mode, recv buffer test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0207 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [SOCR SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h B - ['P SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.ok 2 OK 3.ERROR 4.OK 5.OK 6.ERROR 7.OK 8.OK 9.OK 10.OK 11.OK 12.ERROR' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, 3.target1上使用步骤2创建的socket，去连接 PC的ip， 4.target1上创建TCP socket 5.target1上使用步骤4创建的socket,创建TCP 监听 6.target1上使用步骤4创建的socket，去连接 PC的ip， 7.target1上创建TCP socket 8.target1上使用步骤7创建的socket，去连接 PC的ip， 9.target1上关闭步骤7创建的socket 10.target1上使用步骤7创建的socket，去连接 PC的ip， 11.target1上关闭所有创建的socket 12.target1上使用步骤2创建的socket，去连接 PC的ip，' sub module: TCP summary: AP mode, connect test. use socket in state that can't connect test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0206 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP -i - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP -i - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC2 CONNECT - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] - - SSC SSC1 soc -I - ['P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(,,,)', 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d,.+,\d+"%%(,)', 'P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(,,,)'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4.OK 5.OK 6.OK 7.OK 8.OK 9.PC OK, target1 +ACCEPT:3,2,,port 10.+SOCINFO:,,, +SOCINFO:,,, +SOCINFO:, +SOCINFO:,,, +SOCINF0ALL' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1，去连接\ \ PC的ip，test_tcp_port1,PC有ACCEPT\n4.target1上创建TCP socket2,本地ip target_ip\n5.target1上使用步骤4创建的socket2，去连接\ \ PC的ip，test_tcp_port1,PC有ACCEPT\n6.target1 shutdown socket2 \n7.target1上创建TCP\ \ socket3,本地端口random_port\n8.target1上使用步骤7创建的socket3，去监听\n9.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket4 \n10.target1 查询the socket information" sub module: TCP summary: STA mode, get active socket info test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0201 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [SOCR SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h B - ['P SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] - - SSC SSC1 soc -T - [R SSC1 C +CLOSEALL] - - SSC SSC1 soc -C -s -i -p - ['P SSC1 RE CONNECT:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.ok 2.OK 3.ERROR 4.OK 5.OK 6.ERROR 7.OK 8.OK 9.OK 10.OK 11.OK 12.ERROR' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, 3.target1上使用步骤2创建的socket，去连接 PC的ip， 4.target1上创建TCP socket 5.target1上使用步骤4创建的socket,创建TCP 监听 6.target1上使用步骤4创建的socket，去连接 PC的ip， 7.target1上创建TCP socket 8.target1上使用步骤7创建的socket，去连接 PC的ip， 9.target1上关闭步骤7创建的socket 10.target1上使用步骤7创建的socket，去连接 PC的ip， 11.target1上关闭所有创建的socket 12.target1上使用步骤2创建的socket，去连接 PC的ip，' sub module: TCP summary: STA mode, connect test. use socket in state that can't connect test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_DHCP_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -i 0.0.0.0 - ['R SSC1 C +IP:OK'] - - SSC SSC1 sta -C -s -p - [''] - - DELAY 20 - [P PC_COM C +DELAYDONE, 'P SSC1 NC +JAP:CONNECTED'] - - SSC SSC1 dhcp -S -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -Q - ['R SSC1 C +STAIP:0.0.0.0'] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:CONNECTED'] - - SSC SSC1 ip -Q - ['R SSC1 RE "\+STAIP:%%s"%%()'] comment: '' execution time: 0.0 expected result: "1.target1 关闭DHCP OK\n2.target1 设置ip add OK\n3.target1 连接AP fail\n\ 4.target1 打开DHCP OK\n5.查询到sta ip \n6.target1 连接AP ok\n7.查询到sta ip 为target_ip" initial condition: STAAP1 initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen by STAM1) module: TCPIP steps: "1.target1 关闭DHCP OK\n2.target1 设置ip add OK\n3.target1 连接AP fail\n4.target1\ \ 打开DHCP OK\n5.查询到sta ip \n6.target1 连接AP ok\n7.查询到sta ip 为target_ip" sub module: DHCP summary: dhcp client function test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP client function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0203 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s - ['R SSC1 RE SEND:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s - ['R SSC1 RE SEND:\d+,ERROR'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -S -s - ['R SSC1 RE SEND:\d+,ERROR'] - - SSC SSC1 soc -S -s 1000 - ['R SSC1 RE SEND:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.ERROR 4.OK 5.ERROR 6.OK 7.OK 8.ERROR 9.ERROR' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建UDP传输socket1， 3.target1上使用步骤2创建的socket1，去发送数据 4.target1上创建TCP socket2 5.target1上使用步骤4创建的socket2，去发送数据 6.target1上使用步骤4创建的socket2,创建TCP连接，连接成功 7.target1上shutdown 步骤4的socket2 8.target1往socket2发送错误命令发送数据 9.target1上不指定socket往上发送数据' sub module: TCP summary: send test. use socket in state that can't send test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0202 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,ERROR'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,ERROR'] - - SSC SSC1 soc -L -s 1000 - ['R SSC1 RE LISTEN:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.ERROR 4.OK 5.OK 6.ERROR 7.OK 8.ERROR 9.ERROR' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, 3.target1上使用步骤2创建的socket，去建立TCP 监听 4.target1上创建TCP socket 5.target1上使用步骤4创建的socket，去连接 PC的ip， 6.target1上使用步骤4创建的socket,创建TCP 监听 7.target1上shutdown 步骤4的socket 8.target1上使用步骤4创建的socket,创建TCP 监听 9.target1上使用不存在socket,创建TCP 监听' sub module: TCP summary: STA mode, server listen test. use socket in state that can't listen test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0208 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,ERROR'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,ERROR'] - - SSC SSC1 soc -L -s 1000 - ['R SSC1 RE LISTEN:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.ERROR 4 OK 5.OK 6.ERROR 7.OK 8.ERROR 9.ERROR' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, 3.target1上使用步骤2创建的socket，去建立TCP 监听 4.target1上创建TCP socket 5.target1上使用步骤4创建的socket，去连接 PC的ip， 6.target1上使用步骤4创建的socket,创建TCP 监听 7.target1上shutdown 步骤4的socket 8.target1上使用步骤4创建的socket,创建TCP 监听 9.target1上使用不存在socket,创建TCP 监听' sub module: TCP summary: AP mode, server listen test. use socket in state that can't listen test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DNS_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -H -d iot.espressif.cn - ['R SSC1 A :\+HOSTIP:OK,(.+)\r\n'] - - SSC SSC1 soc -B -t UDP - ['R SSC1 A :\+BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -i -p 9003 -l 10 - ['P SSC1 RE \+SEND:\d+,OK', P SSC1 SL +10] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK' initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: '1. get host name "espressif.cn" 2. sendto, recvfrom1. get host name "espressif.cn" 2. sendto, recvfrom' sub module: DNS summary: UDP send to iot.expressif.com test environment: SSC_T1_2 test environment description (auto): 'Able to access WAN after connect to AP. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DNS function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0206 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - LOOP 4 4 "['01','02','03','01']" "[2,3,4,2]" - [''] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:OK'] - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s} - ['R SSC2 C +MAC:STA,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.{%s}'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 4. get IP 192.168.4.2 - 192.168.4.4 5. get IP 192.168.4.2' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: TCPIP steps: '1. config softap to a random ssid 2. disable DHCP server, do config and enable 3. target2 change mac, connect to softap, disconnect 4. Loop step3 twice 5. change to first mac, connect to softap' sub module: DHCP summary: dhcp server assign same IP to same MAC when it's not released test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0207 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - WIFI CONN 192.168.4.2 - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - WIFI DISCONN2 - ['R PC_COM NC ERROR C +WIFIDISCONN:OK'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:OK'] - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66 - ['R SSC2 C +MAC:STA,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.2'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. get IP 192.168.4.2 4. succeed 5. succeed 6. get IP 192.168.4.2' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: TCPIP steps: '1. config softap to a random ssid 2. disable DHCP server, do config and enable 3. PC WIFI NIC connect to target1 softap 4. target2 connect to target1 softap and disnnect 5. PC release IP and disconnected 6. target2 change mac and connect to target1' sub module: DHCP summary: dhcp server prefer assign released IP to new client test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0204 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 -t 1 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.2'] - - DELAY 90 - [''] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.2'] - - SSC SSC2 sta -D - ['R SSC2 C +JAP:DISCONNECTED'] - - DELAY 60 - [''] - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66 - ['R SSC2 C +MAC:STA,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.2'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. get IP 192.168.4.2 5. succeed 6. succeed 8. get IP 192.168.4.2' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: TCPIP steps: '1. config softap to a random ssid 2. config DHCP timeout as 1 minute 3. target2 connect to target1 4. wait 90 seconds 5. check if target2 IP is same 6. target2 disconnect 7. wait 60s 8. target2 change mac and connect to target1' sub module: DHCP summary: dhcp server timeout test test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0205 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 -t 1 - ['P SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['P SSC1 C +DHCP:AP,OK', 'P SSC2 C +JAP:DISCONNECTED'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. target2 wifi disconnected' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: TCPIP steps: '1. config softap to a random ssid 2. target2 connect to target1 3. disable DHCP server, do config and enable' sub module: DHCP summary: disconnect STA if config dhcp server test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0202 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - LOOP 3 4 "['01','02','03']" "[2,3,4]" - [''] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:OK'] - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s} - ['R SSC2 C +MAC:STA,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.{%s}'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3,4: get IP from dhcp pool with correct sequence' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: TCPIP steps: '1. config softap to a random ssid 2. config DHCP Server on Target1 3. target change mac, connect to Target1 4. Loop step3' sub module: DHCP summary: dhcp server ip pool test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0203 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - LOOP 2 4 "['01','02']" "[2,3]" - [''] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:OK'] - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s} - ['R SSC2 C +MAC:STA,OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:192.168.4.{%s}'] - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66 - ['R SSC2 C +MAC:STA,OK'] - - DELAY 20 - [''] - - SSC SSC2 ip -Q -o 1 - ['R SSC2 C +STAIP:0.0.0.0'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4.1 succeed 4.2 failed' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: TCPIP steps: '1. config softap to a random ssid 2. config DHCP Server on Target1(.4.2 - .4.3) 3. target change mac, connect to Target1 4. Loop step3 twice' sub module: DHCP summary: dhcp server ip pool empty test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0204 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 soc -W -s -o 0 - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC2 SEND 146000 - [P SOC_COM R *] - - SSC SSC1 soc -W -s -o 1 - ['P SSC1 RE WORKTHREAD:\d+,OK', P SSC1 SL +2920] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc server accept OK 4.OK 5.OK 6.OK 7.target收到146000 byte' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1. PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 4.PC与target1 创建好TCP 连接，有ACCEPT 5.target上不进行recv 6.PC send 100 * 1460 data to target, 7.在target上开始recv' sub module: TCP summary: STA mode, recv buffer test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0201 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 ip -S -o 2 -i - ['R SSC1 C +IP:OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.1 -e 192.168.4.10 - ['R SSC1 C +DHCP:LEASE,ERROR'] - - SSC SSC1 dhcp -L -s 192.168.4.5 -e 192.168.4.2 - ['R SSC1 C +DHCP:LEASE,ERROR'] - - SSC SSC1 dhcp -L -s 192.168.2.2 -e 192.168.2.5 - ['R SSC1 C +DHCP:LEASE,ERROR'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] comment: '' execution time: 0.0 expected result: '1.target1 关闭DHCP 2 OK 2.target1 设置ip 成功 3.设置dhcp 地址池 OK 4.ERROR 5.ERROR 6.ERROR 7.target1 打开DHCP ok' initial condition: APM1 initial condition description (auto): AP mode, DHCP on, will autogen a TC with initial condition APSTA1 module: TCPIP steps: "1.target1 关闭DHCP 2 \n2.target1 设置ip \n3.设置dhcp 地址池\n4.设置dhcp错误的参数\n5.设置dhcp错误的参数\n\ 6.设置dhcp错误的参数\n7.target1 打开DHCP ok" sub module: DHCP summary: server dhcp lease test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0208 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,ERROR'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,ERROR'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,ERROR'] - - SSC SSC1 soc -L -s 1000 - ['R SSC1 RE LISTEN:\d+,ERROR'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.ERROR 4 OK 5.OK 6.ERROR 7.OK 8.ERROR 9.ERROR' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, 3.target1上使用步骤2创建的socket，去建立TCP 监听 4.target1上创建TCP socket 5.target1上使用步骤4创建的socket，去连接 PC的ip， 6.target1上使用步骤4创建的socket,创建TCP 监听 7.target1上shutdown 步骤4的socket 8.target1上使用步骤4创建的socket,创建TCP 监听 9.target1上使用不存在socket,创建TCP 监听' sub module: TCP summary: AP mode, server listen test. use socket in state that can't listen test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0208 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['P SSC1 C +DHCP:AP,OK', 'P SSC2 C +JAP:DISCONNECTED'] - - SSC SSC2 sta -D - ['R SSC2 C +JAP:DISCONNECTED'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - WIFI CONN 192.168.4.2 - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - SSC SSC1 ap -L - [R SSC1 C 192.168.4.2 P ] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4. get IP 192.168.4.2 5. can only find target2 with IP 192.168.4.2' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: TCPIP steps: '1. config softap to a random ssid 2. PC NIC connect to target1 softap 3. disable DHCP server, do config and enable 4. target2 connect to target1 softap 5. softap list connected station' sub module: DHCP summary: dhcp server reconfig and new client able to get first IP in pool test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_DHCP_0209 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 dhcp -E -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 - ['R SSC1 C +DHCP:LEASE,OK'] - - SSC SSC1 dhcp -S -o 2 - ['R SSC1 C +DHCP:AP,OK'] - - WIFI CONN 192.168.4.2 - ['R PC_COM NC ERROR C +WIFICONN:OK'] - - DELAY 20 - [''] - - SSC SSC1 ap -L - [R SSC1 C 192.168.4.2 C 192.168.4.3 P P ] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. succeed 4. succeed 5. find target2 and PC' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: TCPIP steps: '1. config softap to a random ssid 2. target2 connect to target1 softap 3. disable DHCP server, do config and enable 4. PC NIC connect to target1 softap 5. softap list connected station' sub module: DHCP summary: dhcp server reconfig, old client and new client able to get IP test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: DHCP server function test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0412 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.OK 7.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket1 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 4.PC与target1创建好TCP 连接，有ACCEPT 5.target1上创建TCP socket2 6.关闭socket1 连接 7.关闭socket2连接' sub module: TCP summary: close TCP send after socket changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_TCP_0411 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,ERROR'] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK; PC TCP server accept 成功 4.OK 5.OK 6.ERROR 7.OK' initial condition: STAAP2 initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP on (autogen by STAM2) module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket1 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 4.PC与target1创建好TCP 连接，有ACCEPT 5.target1上创建TCP socket2 6.8266往PC socket2上发送5字节数据 7.8266往PC socket1上发送5字节数据' sub module: TCP summary: do TCP send after socket changed test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: TCP handling abnormal event version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0901 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: basic function auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:CONNECTED'] - - SSC SSC1 sta -D - ['R SSC1 C +JAP:DISCONNECTED,0,8'] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:DISCONNECTED,2,15'] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:DISCONNECTED,1,201'] comment: '' execution time: 0.0 expected result: '1. disconnect event reason REASON_ASSOC_LEAVE 2. disconnect event reason REASON_4WAY_HANDSHAKE_TIMEOUT 3. disconnect event reason REASON_NO_AP_FOUND' initial condition: STAM1 initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a TC with initial condition STAAP1 module: WIFI MAC steps: '1. sta connect to AP, and disconnect 2. connect to AP with wrong password 3. connect to AP not exist' sub module: WIFI Connect summary: test wifi disconnect reason REASON_ASSOC_LEAVE, REASON_4WAY_HANDSHAKE_TIMEOUT, REASON_NO_AP_FOUND test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: wifi disconnect reason test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_ARP_0203 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - STRING ether%20src%20%%s%20or%20ether%20dst%20%%s - [R PC_COM C OK] - - NIC NIC1 START capture+send+block_arp_ip - ['R PC_COM C +NIC_START:OK'] - - NIC NIC1 SEND ARP arp_op_code "request" arp_target_proto_addr arp_hw_len 10 ethernet_dst_addr "ff:ff:ff:ff:ff:ff" - [''] - - DELAY 2 - [P PC_COM C +DELAYDONE, P NIC1 NPDU (Ethernet.dst_addr=)(Ethernet.len_type="ARP")] - - NIC NIC1 SEND ARP arp_op_code "request" arp_target_proto_addr arp_proto_len 10 ethernet_dst_addr "ff:ff:ff:ff:ff:ff" - [''] - - DELAY 2 - [P PC_COM C +DELAYDONE, P NIC1 NPDU (Ethernet.dst_addr=)(Ethernet.len_type="ARP")] comment: '' execution time: 0.0 expected result: 1. PC can't recv ARP reply from target initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: 1. PC send ARP req with hw_addr_len and proto_addr_len not correct sub module: ARP summary: PC send invalid ARP request to target 3 test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: handling ARP request version: v1 (2015-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0903 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -C -s -p bacfd - ['R SSC1 C +JAP:DISCONNECTED,4,2'] comment: '' execution time: 0.0 expected result: 1. disconect event reason REASON_AUTH_EXPIRE initial condition: STAM1 initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a TC with initial condition STAAP1 module: WIFI MAC steps: 1. connect WEP ap with error password (valid wep password) sub module: WIFI Connect summary: test wifi disconnect reason REASON_AUTH_EXPIRE test environment: SSC_T1_WEP test environment description (auto): '1 SSC target connect with PC by UART. One WEP share key AP placed near SSC1.' test point 1: basic function test point 2: wifi disconnect reason test version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0503 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -R -r 0 - [R SSC1 C OK] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:OK', 'R SSC1 NC +JAP:DISCONNECTED,1 C +JAP:DISCONNECTED,3'] - - DELAY 5 - ['R SSC1 NC +JAP:DISCONNECTED', P PC_COM C +DELAYDONE] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:OK', 'R SSC1 NC +JAP:DISCONNECTED,1 C +JAP:DISCONNECTED,2'] - - DELAY 5 - ['R SSC1 NC +JAP:DISCONNECTED', P PC_COM C +DELAYDONE] - - SSC SSC1 sta -R -r 1 - [SSC SSC1 C OK] comment: '' execution time: 0.0 expected result: '1. succeed 2. not reconnect when connect failed, status when recv disconnect event is correct 3. not reconnect when connect failed, status when recv disconnect event is correct 4. succeed' initial condition: STAM1 initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a TC with initial condition STAAP1 module: WIFI MAC steps: '1. set sta reconnect policy as not reconnect 2. sta connect to ap not exist 3. sta connect to ap with wrong password 4. reset sta reconnect policy as auto reconnect ' sub module: WIFI Connect summary: reconnect policy interact with failed STA connect/reconnect test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: reconnect policy test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0112 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.关闭socket1' sub module: UDP summary: AP mode, close UDP sockets test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0114 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -I - ['P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(,)'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 2.target1上查询创建socket信息' sub module: UDP summary: AP mode, get active socket info test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use UDP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0104 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t -m 1 - ['R SSC1 C +SAP:OK'] - - WIFI DISCONN - ['R PC_COM C +WIFIDISCONN:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - WIFI CONN - ['R PC_COM C +WIFICONN:ERROR'] comment: '' execution time: 0.0 expected result: '1. target1 set AP,set max allowed sta as 1 2. use PC disconnect, 3.target 2 jap succeed 4.PC WIFI can not CONN' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: '1.target1下设置ssid 和pwd 加密方式,set max allowed sta as 1 2.use PC disconnect target1 3.target 2 jap target1 4.PC WIFI CONNECT target1' sub module: WIFI Connect summary: station SAP test, max allowed sta test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: SAP/JAP with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_UDP_0202 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 BIND - [R SOC_COM L OK] - - SSC SSC1 soc -B -t UDP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -W -s -o 0 - ['R SSC1 RE WORKTHREAD:\d+,OK'] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] - - SOC SOC1 SENDTO 1472 - [''] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.PC OK 5.PC OK 6.PC OK 7.PC OK 8.PC OK SOC_CLOSE=SOC1' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1.PC上SOC1 UDP传输，bing 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 3.target1上关闭工作线程 4.PC往8266上发送1472字节数据 5.PC往8266上发送1472字节数据 6.PC往8266上发送1472字节数据 7.PC往8266上发送1472字节数据 8.PC往8266上发送1472字节数据' sub module: UDP summary: AP mode, recv buffer test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: use UDP SAP (socket/espconn API) in different state version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_IGMP_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 igmp -J -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 igmp -L -h -m 224.1.1.1 - ['R SSC1 C +IGMP:OK'] - - SSC SSC1 igmp -J -h -m 223.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -J -h -m 240.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -J -h 192.168.237.77 -m 224.1.1.1 - ['R SSC1 C +IGMP:ERROR'] - - SSC SSC1 igmp -J -h 192.168.237.77 -m 240.1.1.1 - ['R SSC1 C +IGMP:ERROR'] comment: '' execution time: 0.0 expected result: '1. success 2. failed 3. failed 4. failed' initial condition: APSTA2 initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen by APM2) module: TCPIP steps: '1. join group with correct host addr and multicast addr 2. join group with correct host addr and wrong multicast addr 3. join group with wrong host addr and correct multicast addr 4. join group with wrong host addr and wrong multicast addr' sub module: IGMP summary: softAP IGMP join group address check test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: IGMP API parameter check version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -t 0 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 ap -S -s -p -t 2 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 ap -S -s -p -t 1 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S - ['R SSC2 RE "\+SCAN:%%s,.+,0,\d+"%%()'] - - SSC SSC1 ap -S -s -p -t 5 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S - ['R SSC2 RE "\+SCAN:%%s,.+,0,\d+"%%()'] comment: '' execution time: 0.0 expected result: "1.target1 set AP,open, \n2.target 2 jap succeed\n3.target1 set\ \ AP,wpa_psk \n4.target 2 jap succeed\n5.target1 set AP, wpa2_psk \n6.target 2\ \ jap succeed\n7.target1 set AP,wap_wpa2_psk\n8.target 2 jap succeed\n9.target1\ \ set AP,加密方式为t 1\n10.target 2 上查询到target_ssid\n11.target1 set AP,加密方式为t 5\n12.target\ \ 2 上查询到target_ssid" initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: "1.target1下设置ssid 和pwd,加密方式 open\n2.target2 jap target1\n3.target1下设置ssid\ \ 和pwd,加密方式 wpa_psk \n4.target2 jap target1\n5.target1下设置ssid 和pwd,加密方式 wpa2_psk\ \ \n6.target 2 jap target1\n7.target1下设置ssid 和pwd,加密方式 wap_wpa2_psk\n8.target2\ \ jap target1\n9.target1下设置ssid 和pwd,加密方式 wep \n10.target2上查询target_ssid\n11.target1下设置ssid\ \ 和pwd,加密方式 t 5 错误的加密方式\n12.target2上查询 target_ssid" sub module: WIFI Connect summary: station SAP+JAP test, different encryption test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: SAP/JAP with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0102 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -t 0 -n 1 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 ap -S -s -t 0 -n 13 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 ap -S -s -n 15 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S - ['R SSC2 RE "\+SCAN:%%s,.+,\d+,1"%%()'] comment: '' execution time: 0.0 expected result: '1. target1 set AP,set channel 1 2.target 2 jap succeed 3.target1 set AP,set channel 10 4.target 2 jap succeed 5.target1 set AP,set channel 15 6.target 2 上查询到target_ssid' initial condition: T2O_1 initial condition description (auto): same as T2_1 but will NOT autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1. target1下设置ssid 和pwd 加密方式,set channel 1 2.target2 jap target 1 3.target1下设置ssid 和pwd 加密方式,set channel 10 4.target2 jap target 1 5.target1下设置ssid 和pwd 加密方式,set channel 15 6.target 2 上查询target_ssid' sub module: WIFI Connect summary: station SAP+JAP test, different channel test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: SAP/JAP with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0103 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t -h 0 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S -h 0 - [R SSC2 P , R SSC2 C +SCANDONE] - - SSC SSC1 ap -S -s -p -t -h 1 - ['R SSC1 C +SAP:OK'] - - DELAY 3 - [''] - - SSC SSC2 sta -S -h 0 - [R SSC2 C +SCANDONE] - - DELAY 3 - [''] - - SSC SSC2 sta -S -h 0 - [R SSC2 NP C +SCANDONE] comment: '' execution time: 0.0 expected result: '1.target1 set AP,set ssid broad cast 2.target 2上scan target_ap_mac 3.target1 set AP,set ssid hidden, 4.target 2上不能scan target_ap_mac' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1. target1下设置ssid 和pwd 加密方式,set ssid broad cast 2.target 2上scan target_ap_mac 3. target1下设置ssid 和pwd 加密方式,set ssid hidden, 4.target 2上scan target_ap_mac' sub module: WIFI Connect summary: station SAP+JAP test, ssid hidden test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: SAP/JAP with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^TCPIP_IP_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 dhcp -S -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -o 1 -i 192.168.123.123 - ['R SSC1 C +IP:ERROR'] - - SSC SSC1 dhcp -E -o 1 - ['R SSC1 C +DHCP:STA,OK'] - - SSC SSC1 ip -S -o 1 -i 192.168.123.123 - ['R SSC1 C +IP:OK'] - - SSC SSC1 ip -Q -o 1 - ['R SSC1 C +STAIP:192.168.123.123'] comment: '' execution time: 0.0 expected result: '1.OK 2.ERROR 3.OK 4.OK 5.STAIP:192.168.123.123' initial condition: STAAP1 initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen by STAM1) module: TCPIP steps: '1.target1 打开DHCP 1 2.target1 设置sta ip 192.168.123.123 4.target1 关闭DHCP 1 5.target1 设置sta ip 192.168.123.123 6.target1 查询 当前sta ip' sub module: IP summary: sta set and query static ip test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: set and query static IP version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0702 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:OK', 'R SSC1 C +JAP:DISCONNECTED,3'] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:OK', 'R SSC1 C +JAP:DISCONNECTED,2'] comment: '' execution time: 0.0 expected result: '1. get status AP not exist in disconnect event 2. get status wrong password in disconnect event' initial condition: STAAP1 initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen by STAM1) module: WIFI MAC steps: '1. sta connect to ap not exist 2. sta connect to ap with wrong password' sub module: WIFI Connect summary: check wifi status wrong password, no ap found test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: wifi connect status check version: v1 (2016-8-15) - CI ready: 'Yes' ID: WIFI_CONN_0801 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t 0 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC1 ap -S -s -p -t 2 - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,2,0'] - - SSC SSC1 ap -S -s -p -t 3 - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,3,2'] - - SSC SSC1 ap -S -s -p -t 4 - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,4,3'] - - SSC SSC1 ap -S -s -p -t 0 - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,0,4'] comment: '' execution time: 0.0 expected result: '1. succeed 2. succeed 3. auth change event old mode 0 new mode 2 4. auth change event old mode 2 new mode 3 5. auth change event old mode 3 new mode 4 6. auth change event old mode 4 new mode 0' initial condition: T2_1 initial condition description (auto): target 1 as SoftAP, target 2 as STA, will autogen a TC with initial condition T2_2 module: WIFI MAC steps: '1. set target1 softap auth mode 0 2. target2 connect to target1 3. set target1 softap auth mode 2, wait sta connected 4. set target1 softap auth mode 3, wait sta connected 5. set target1 softap auth mode 4, wait sta connected 6. set target1 softap auth mode 0, wait sta connected' sub module: WIFI Connect summary: test auth change event test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: wifi auth changed event test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -t 0 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 ap -S -s -p -t 2 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 ap -S -s -p -t 4 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 ap -S -s -p -t 1 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S - ['R SSC2 RE "\+SCAN:%%s,.+,0,\d+"%%()'] - - SSC SSC1 ap -S -s -p -t 5 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S - ['R SSC2 RE "\+SCAN:%%s,.+,0,\d+"%%()'] comment: '' execution time: 0.0 expected result: "1.target1 set AP,open, \n2.target 2 jap succeed\n3.target1 set\ \ AP,wpa_psk \n4.target 2 jap succeed\n5.target1 set AP, wpa2_psk \n6.target 2\ \ jap succeed\n7.target1 set AP,wap_wpa2_psk\n8.target 2 jap succeed\n9.target1\ \ set AP,加密方式为t 1\n10.target 2 上查询到target_ssid\n11.target1 set AP,加密方式为t 5\n12.target\ \ 2 上查询到target_ssid" initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: "1.target1下设置ssid 和pwd,加密方式 open\n2.target2 jap target1\n3.target1下设置ssid\ \ 和pwd,加密方式 wpa_psk \n4.target2 jap target1\n5.target1下设置ssid 和pwd,加密方式 wpa2_psk\ \ \n6.target 2 jap target1\n7.target1下设置ssid 和pwd,加密方式 wap_wpa2_psk\n8.target2\ \ jap target1\n9.target1下设置ssid 和pwd,加密方式 wep \n10.target2上查询target_ssid\n11.target1下设置ssid\ \ 和pwd,加密方式 t 5 错误的加密方式\n12.target2上查询 target_ssid" sub module: WIFI Connect summary: station SAP+JAP test, different encryption test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: SAP/JAP with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_ARP_0201 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - STRING ether%20src%20%%s%20or%20ether%20dst%20%%s - [R PC_COM C OK] - - NIC NIC1 START capture+send+block_arp_ip - ['R PC_COM C +NIC_START:OK'] - - NIC NIC1 SEND ARP arp_op_code "request" arp_hw_type 0xF1F1 arp_target_proto_addr ethernet_dst_addr "ff:ff:ff:ff:ff:ff" - [''] - - DELAY 2 - [P PC_COM C +DELAYDONE, P NIC1 NPDU (Ethernet.dst_addr=)(Ethernet.len_type="ARP")] - - NIC NIC1 SEND ARP arp_op_code "request" arp_proto_type 0xF1F1 arp_target_proto_addr ethernet_dst_addr "ff:ff:ff:ff:ff:ff" - [''] - - DELAY 2 - [P PC_COM C +DELAYDONE, P NIC1 NPDU (Ethernet.dst_addr=)(Ethernet.len_type="ARP")] comment: '' execution time: 0.0 expected result: 1. PC can't recv ARP reply from target initial condition: STAM2 initial condition description (auto): sta mode, join AP, DHCP on, will autogen a TC with initial condition STAAP2 module: TCPIP steps: 1. PC send ARP req with unsupported hw type and protocol type sub module: ARP summary: PC send invalid ARP request to target 1 test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: handling ARP request version: v1 (2015-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0503 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 sta -R -r 0 - [R SSC1 C OK] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:OK', 'R SSC1 NC +JAP:DISCONNECTED,1 C +JAP:DISCONNECTED,3'] - - DELAY 5 - ['R SSC1 NC +JAP:DISCONNECTED', P PC_COM C +DELAYDONE] - - SSC SSC1 sta -C -s -p - ['R SSC1 C +JAP:OK', 'R SSC1 NC +JAP:DISCONNECTED,1 C +JAP:DISCONNECTED,2'] - - DELAY 5 - ['R SSC1 NC +JAP:DISCONNECTED', P PC_COM C +DELAYDONE] - - SSC SSC1 sta -R -r 1 - [SSC SSC1 C OK] comment: '' execution time: 0.0 expected result: '1. succeed 2. not reconnect when connect failed, status when recv disconnect event is correct 3. not reconnect when connect failed, status when recv disconnect event is correct 4. succeed' initial condition: STAAP1 initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen by STAM1) module: WIFI MAC steps: '1. set sta reconnect policy as not reconnect 2. sta connect to ap not exist 3. sta connect to ap with wrong password 4. reset sta reconnect policy as auto reconnect' sub module: WIFI Connect summary: reconnect policy interact with failed STA connect/reconnect test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: reconnect policy test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0502 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 sta -R -r 1 - ['R SSC2 C +RECONN:OK'] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - DELAY 5 - ['R SSC2 C +JAP:DISCONNECTED'] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - DELAY 10 - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 sta -D - ['R SSC2 C +QAP:OK'] - - DELAY 10 - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] comment: '' execution time: 0.0 expected result: '1.target1 set AP 2.target2 jap target 1 3.设置reconn,开启（此功能不需要重启系统） 4.target2 断开target1 连接 5.等待10s，target2 自动重连target1 6.target2 断开target1 连接' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: '1.target1下设置ssid 和pwd 加密方式 2.target2 jap target 1 3.设置reconn,开启（此功能不需要重启系统） 4.target2 断开target1 连接 5.等待10s，target2 自动重连target1 6.target2 断开target1 连接' sub module: WIFI Connect summary: will not do reconnect after manually disconnected test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: abnormal/special use test point 2: reconnect policy test version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_CONN_0501 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC2 sta -R -r 1 - ['R SSC2 C +RECONN:OK'] - - SSC SSC1 ap -S -s -p -t - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -C -s -p - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - DELAY 10 - [''] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - DELAY 15 - ['R SSC2 C +JAP:CONNECTED'] - - SSC SSC2 sta -R -r 0 - ['R SSC2 C +RECONN:OK'] - - SSC SSC2 sta -R -r 2 - ['R SSC2 C +RECONN:0'] - - SSC SSC1 op -S -o 1 - ['R SSC1 C +MODE:OK'] - - DELAY 10 - [''] - - SSC SSC1 op -S -o 2 - ['R SSC1 C +MODE:OK'] - - DELAY 15 - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] - - SSC SSC2 sta -R -r 1 - ['R SSC2 C +RECONN:OK'] comment: '' execution time: 0.0 expected result: '1.设置reconn,开启（此功能不需要重启系统） 2.target1 set AP 3.target2 JAP target1 成功 4.target2 断开target1 连接 5.等待10s，target2 自动重连target1 6.成功 7.查询reconn状态，关闭 8.修改mode 成功 9.等待15s，target2 不会自动重连target1' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: "1.设置reconn,开启（此功能不需要重启系统）\n2.target1下设置ssid 和pwd 加密方式\n3.target2 JAP target1\ \ \n4.target1 修改mode 为sta mode\n5.等待10s，target1 修改mode 为softAP mode\n6.设置reconn，关闭\n\ 7.查询reconn状态，关闭\n8.target1 修改mode 为sta mode\n9.等待15s，target1 修改mode 为softAP mode" sub module: WIFI Connect summary: reconnect policy test test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: reconnect policy test version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0115 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4 OK 5.OK,pc tcp server accept成功 6.OK 7.OK,pc tcp server accept成功 8 OK 9.OK,pc tcp server accept成功 10.OK 11.OK,pc tcp server accept成功' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1.PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket1 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 4.target1上创建TCP socket2 5.target1上使用步骤4创建的socket2，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 6.target1上创建TCP socket3 7.target1上使用步骤6创建的socket3，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 8.target1上创建TCP socket4 9.target1上使用步骤8创建的socket4，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 10.target1上创建TCP socket5 11.target1上使用步骤10创建的socket5，去连接 PC的ip，test_tcp_port1,PC有ACCEPT' sub module: TCP summary: AP mode, create max TCP sockets test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: ^WIFI_SCAN_0101 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC2 sta -S -s .,juhg123 - ['R SSC2 NC +SCAN: C +SCANDONE'] - - SSC SSC1 ap -S -s -p 123456789 -t 3 - ['R SSC1 C +SAP:OK'] - - SSC SSC2 sta -S -s - ['R SSC2 C +SCAN:', R SSC2 P , 'R SSC2 NC +SCAN: C +SCANDONE'] comment: '' execution time: 0.0 expected result: '1.target 2上不能scan .,juhg123 2.target1 set AP 3.target2上查询到' initial condition: T2_2 initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) module: WIFI MAC steps: '1.target 2 scan .,juhg123 2.target1下设置ssid 和pwd 加密方式 3.target2 scan ' sub module: WIFI Scan summary: scan with scan config ssid test environment: SSC_T2_1 test environment description (auto): 'PC has 1 wired NIC connected to AP. PC has 1 WiFi NIC. 2 SSC target connect with PC by UART.' test point 1: basic function test point 2: scan with different config version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0114 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC2 CONNECT 0 - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -T -s - ['R SSC1 RE CLOSE:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK 4.OK 5.OK 6.OK,target1上accept 成功 7.target1关闭socket1 8.target1关闭socket2 9.OK 10.OK,pc tcp server accept成功 11.target1关闭socket1 12.OK 13.OK,pc tcp server accept成功 14.OK 15.target1关闭socket1' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1关闭socket1\n\ 4.target1上创建TCP socket 端口随机\n5.target1上使用步骤4创建的socket1，去监听\n6.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket2 \n7.target1关闭socket1\n8.target1关闭socket2\n\ 9.target1上创建TCP socket1\n10.target1上使用步骤10创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT\n\ 11.target1关闭socket1\n12.target1上创建TCP socket1\n13.target1上使用步骤13创建的socket1，去连接\ \ PC的ip，test_tcp_port1,PC有ACCEPT\n14.target1shutdown socket1\n15.target1关闭socket1" sub module: TCP summary: AP mode, close for different types of TCP sockets test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0116 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC2 CONNECT 0 - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC3 CONNECT 0 - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC4 CONNECT 0 - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC5 CONNECT 0 - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] - - SOC SOC6 CONNECT 0 - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] comment: '' execution time: 0.0 expected result: '1.+BIND:0，OK,0.0.0.0 2.OK 3.OK,pc tcp server accept成功 4.OK,pc tcp server accept成功 5.OK,pc tcp server accept成功 6.OK,pc tcp server accept成功 7.OK,pc tcp server accept成功' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: "1.target1上创建TCP socket 端口随机\n2.target1上使用步骤4创建的socket1，去监听\n3.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket2 \n4.PC CONNECT, ,tcp 连接创建成功，创建socket3\ \ \n5.PC CONNECT, ,tcp 连接创建成功，创建socket4 \n6.PC CONNECT,\ \ ,tcp 连接创建成功，创建socket5 \n7.PC CONNECT, ,tcp 连接创建成功，创建socket6\ \ " sub module: TCP summary: AP mode, accept max TCP client by server test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0111 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SSC SSC1 soc -B -t TCP -p - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -L -s - ['R SSC1 RE LISTEN:\d+,OK'] - - SOC SOC1 CONNECT 0 - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+', P SOC_COM C OK] - - SOC SOC1 CONNECT 0 - [P SOC_COM C ERROR, P SSC1 NC ACCEPT] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.PC TCP client accept 4.error' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1.target1上创建TCP socket，bind到本地端口 2.target1上使用步骤1创建的socket,创建TCP 监听 3.PC TCP 连接到target1 , 4.PC tcp 连接到不存在的port ,' sub module: TCP summary: AP mode, server listen test. use different kinds of port test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0113 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h B - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h W - ['R SSC1 RE SHUTDOWN:\d+,OK'] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SSC SSC1 soc -D -s -h R - ['R SSC1 RE SHUTDOWN:\d+,OK'] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4.OK 5.OK 6.OK,pc tcp server accept成功 7.OK 8.OK 9.OK,pc tcp server accept成功 10.OK' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1. PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 4.target1 shutdown socket1 B 5.target1上创建TCP socket 6.target1上使用步骤5创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 7.target1 shutdown socket2 W 8.target1上创建TCP socket 9.target1上使用步骤8创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT 10.target1 shutdown socket3 R' sub module: TCP summary: AP mode, shutdown basic test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15) - CI ready: 'Yes' ID: TCPIP_TCP_0112 SDK: '8266_NonOS 8266_RTOS ESP32_IDF' Test App: SSC auto test: 'Yes' category: Function cmd set: - '' - - SOC SOC1 LISTEN - [R SOC_COM L OK] - - SSC SSC1 soc -B -t TCP - ['R SSC1 A :BIND:(\d+),OK'] - - SSC SSC1 soc -C -s -i -p - ['R SSC1 RE CONNECT:\d+,OK'] - - SOC SOC1 ACCEPT SOC2 - [R SOC_COM L OK] - - SOC SOC2 SEND 5 - [R SSC1 SL +5] - - SSC SSC1 soc -S -s -l 5 - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 5] - - SOC SOC2 SEND 146000 - [R SSC1 SL +146000] - - SSC SSC1 soc -S -s -l 1460 -n 100 - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 146000] comment: '' execution time: 0.0 expected result: '1.OK 2.OK 3.OK,pc tcp server accept成功 4.OK 5.target收到5byte数据 6.PC收到5byte数据 7.target收到146000 byte数据 8.OK,PC 收到146000 byte数据' initial condition: APM2 initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen a TC with initial condition APSTA2 module: TCPIP steps: '1. PC上建立TCP 监听 test_tcp_port1 2.target1上创建TCP socket 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 4.PC与target1 创建好TCP 连接，有ACCEPT 5.PC send 5 bytes to 8266 6.8266 send 5 bytes to PC 7. PC send 100 * 1460 data to 8266, 8.8266 send 100 * 1460 to PC. ' sub module: TCP summary: AP mode, send/recv basic test test environment: SSC_T1_1 test environment description (auto): 'PC has 2 wired NIC connected to AP. PC has 1 WiFi NIC. 1 SSC target connect with PC by UART.' test point 1: basic function test point 2: use TCP SAP (socket/espconn API) with different parameter version: v1 (2016-8-15)