// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. /* Tests for the adc device driver */ #include "esp_system.h" #include "driver/adc.h" #include "driver/dac.h" #include "driver/rtc_io.h" #include "driver/gpio.h" #include "unity.h" #include "esp_system.h" #include "esp_event.h" #include "esp_wifi.h" #include "esp_log.h" #include "nvs_flash.h" #include "test_utils.h" #if !DISABLED_FOR_TARGETS(ESP8266, ESP32S2) // This testcase for ESP32 /* * ADC DMA testcase */ #include "driver/i2s.h" //i2s number #define EXAMPLE_I2S_NUM (0) //i2s sample rate #define EXAMPLE_I2S_SAMPLE_RATE (16000) //i2s data bits #define EXAMPLE_I2S_SAMPLE_BITS (16) //enable display buffer for debug #define EXAMPLE_I2S_BUF_DEBUG (0) //I2S read buffer length #define EXAMPLE_I2S_READ_LEN (16 * 1024) //I2S data format #define EXAMPLE_I2S_FORMAT (I2S_CHANNEL_FMT_RIGHT_LEFT) //I2S channel number #define EXAMPLE_I2S_CHANNEL_NUM ((EXAMPLE_I2S_FORMAT < I2S_CHANNEL_FMT_ONLY_RIGHT) ? (2) : (1)) //I2S built-in ADC unit #define I2S_ADC_UNIT ADC_UNIT_1 //I2S built-in ADC channel #define I2S_ADC_CHANNEL ADC1_CHANNEL_4 //flash record size, for recording 5 seconds' data #define FLASH_RECORD_SIZE (EXAMPLE_I2S_CHANNEL_NUM * EXAMPLE_I2S_SAMPLE_RATE * EXAMPLE_I2S_SAMPLE_BITS / 8 * 5) #define FLASH_ERASE_SIZE (FLASH_RECORD_SIZE % FLASH_SECTOR_SIZE == 0) ? FLASH_RECORD_SIZE : FLASH_RECORD_SIZE + (FLASH_SECTOR_SIZE - FLASH_RECORD_SIZE % FLASH_SECTOR_SIZE) //sector size of flash #define FLASH_SECTOR_SIZE (0x1000) /** * @brief I2S ADC/DAC mode init. */ static void example_i2s_init(void) { int i2s_num = EXAMPLE_I2S_NUM; i2s_config_t i2s_config = { .mode = I2S_MODE_MASTER | I2S_MODE_RX | I2S_MODE_TX | I2S_MODE_DAC_BUILT_IN | I2S_MODE_ADC_BUILT_IN, .sample_rate = EXAMPLE_I2S_SAMPLE_RATE, .bits_per_sample = EXAMPLE_I2S_SAMPLE_BITS, .channel_format = EXAMPLE_I2S_FORMAT, .intr_alloc_flags = 0, .dma_buf_count = 2, .dma_buf_len = 1024, .use_apll = 1, }; //install and start i2s driver TEST_ESP_OK( i2s_driver_install(i2s_num, &i2s_config, 0, NULL) ); //init ADC pad TEST_ESP_OK( i2s_set_adc_mode(I2S_ADC_UNIT, I2S_ADC_CHANNEL) ); } static void example_i2s_deinit(void) { TEST_ESP_OK( i2s_driver_uninstall(EXAMPLE_I2S_NUM) ); } /** * @brief debug buffer data */ static void example_disp_buf(uint8_t *buf, int length) { printf("======\n"); for (int i = 0; i < length; i++) { printf("%02x ", buf[i]); if ((i + 1) % 8 == 0) { printf("\n"); } } printf("======\n"); } TEST_CASE("ADC DMA read", "[adc dma]") { example_i2s_init(); int i2s_read_len = EXAMPLE_I2S_READ_LEN; int flash_wr_size = 0; size_t bytes_read; char *i2s_read_buff = (char *) calloc(i2s_read_len, sizeof(char)); TEST_ESP_OK( i2s_adc_enable(EXAMPLE_I2S_NUM) ); while (flash_wr_size < FLASH_RECORD_SIZE) { //read data from I2S bus, in this case, from ADC. TEST_ESP_OK( i2s_read(EXAMPLE_I2S_NUM, (void *) i2s_read_buff, i2s_read_len, &bytes_read, portMAX_DELAY) ); example_disp_buf((uint8_t *) i2s_read_buff, 64); //save original data from I2S(ADC) into flash. flash_wr_size += i2s_read_len; ets_printf("Sound recording %u%%\n", flash_wr_size * 100 / FLASH_RECORD_SIZE); } TEST_ESP_OK( i2s_adc_disable(EXAMPLE_I2S_NUM) ); if (i2s_read_buff) { free(i2s_read_buff); i2s_read_buff = NULL; } example_i2s_deinit(); } #endif // !DISABLED_FOR_TARGETS(ESP8266, ESP32S2)