// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. #include "freertos/FreeRTOS.h" #include "freertos/semphr.h" #include #include "sdkconfig.h" #include "spi_common_internal.h" #include "esp_intr_alloc.h" #include "soc/spi_caps.h" #include "stdatomic.h" #include "esp_log.h" #include /* * This lock is designed to solve the conflicts between SPI devices (used in tasks) and * the background operations (ISR or cache access). * * There are N (device/task) + 1 (BG) acquiring processer candidates that may touch the bus. * * The core of the lock is a `status` atomic variable, which is always available. No intermediate * status is allowed. The atomic operations (mainly `atomic_fetch_and`, `atomic_fetch_or`) * atomically read the status, and bitwisely write status value ORed / ANDed with given masks. * * Definitions of the status: * - [30] WEAK_BG_FLAG, active when the BG is the cache * - [29:20] LOCK bits, active when corresponding device is asking for acquiring * - [19:10] PENDING bits, active when the BG acknowledges the REQ bits, but hasn't fully handled them. * - [ 9: 0] REQ bits, active when corresponding device is requesting for BG operations. * * The REQ bits together PENDING bits are called BG bits, which represent the actual BG request * state of devices. Either one of REQ or PENDING being active indicates the device has pending BG * requests. Reason of having two bits instead of one is in the appendix below. * * Acquiring processer means the current processor (task or ISR) allowed to touch the critical * resources, or the SPI bus. * * States of the lock: * - STATE_IDLE: There's no acquiring processor. No device is acquiring the bus, and no BG * operation is in progress. * * - STATE_ACQ: The acquiring processor is a device task. This means one of the devices is * acquiring the bus. * * - STATE_BG: The acquiring processor is the ISR, and there is no acquiring device. * * - STATE_BG_ACQ: The acquiring processor is the ISR, and there is an acquiring device. * * * Whenever a bit is written to the status, it means the a device on a task is trying to acquire * the lock (either for the task, or the ISR). When there is no LOCK bits or BG bits active, the * caller immediately become the acquiring processor. Otherwise, the task has to block, and the ISR * will not be invoked until scheduled by the current acquiring processor. * * The acquiring processor is responsible to assign the next acquiring processor by calling the * scheduler, usually after it finishes some requests, and cleared the corresponding status bit. * But there is one exception, when the last bit is cleared from the status, after which there is * no other LOCK bits or BG bits active, the acquiring processor lost its role immediately, and * don't need to call the scheduler to assign the next acquiring processor. * * The acquiring processor may also choose to assign a new acquiring device when there is no, by * calling `spi_bus_lock_bg_rotate_acq_dev` in the ISR. But the acquiring processor, in this case, * is still the ISR, until it calls the scheduler. * * * Transition of the FSM: * * - STATE_IDLE: no acquiring device, nor acquiring processor, no LOCK or BG bits active * -> STATE_BG: by `req_core` * -> STATE_ACQ: by `acquire_core` * * - STATE_BG: * * No acquiring device, the ISR is the acquiring processor, there is BG bits active, but no LOCK * bits * * The BG operation should be enabled while turning into this state. * * -> STATE_IDLE: by `bg_exit_core` after `clear_pend_core` for all BG bits * -> STATE_BG_ACQ: by `schedule_core`, when there is new LOCK bit set (by `acquire_core`) * * - STATE_BG_ACQ: * * There is acquiring device, the ISR is the acquiring processor, there may be BG bits active for * the acquiring device. * * The BG operation should be enabled while turning into this state. * * -> STATE_ACQ: by `bg_exit_core` after `clear_pend_core` for all BG bits for the acquiring * device. * * Should not go to the STATE_ACQ (unblock the acquiring task) until all requests of the * acquiring device are finished. This is to preserve the sequence of foreground (polling) and * background operations of the device. The background operations queued before the acquiring * should be completed first. * * - STATE_ACQ: * * There is acquiring device, the task is the acquiring processor, there is no BG bits active for * the acquiring device. * * The acquiring task (if blocked at `spi_bus_lock_acquire_start` or `spi_bus_lock_wait_bg_done`) * should be resumed while turning into this state. * * -> STATE_BG_ACQ: by `req_core` * -> STATE_BG_ACQ (other device): by `acquire_end_core`, when there is LOCK bit for another * device, and the new acquiring device has active BG bits. * -> STATE_ACQ (other device): by `acquire_end_core`, when there is LOCK bit for another devices, * but the new acquiring device has no active BG bits. * -> STATE_BG: by `acquire_end_core` when there is no LOCK bit active, but there are active BG * bits. * -> STATE_IDLE: by `acquire_end_core` when there is no LOCK bit, nor BG bit active. * * The `req_core` used in the task is a little special. It asks for acquiring processor for the * ISR. When it succeed for the first time, it will invoke the ISR (hence passing the acquiring * role to the BG). Otherwise it will not block, the ISR will be automatically be invoked by other * acquiring processor. The caller of `req_core` will never become acquiring processor by this * function. * * * Appendix: The design, that having both request bit and pending bit, is to solve the * concurrency issue between tasks and the bg, when the task can queue several requests, * however the request bit cannot represent the number of requests queued. * * Here's the workflow of task and ISR work concurrently: * - Task: (a) Write to Queue -> (b) Write request bit * The Task have to write request bit (b) after the data is prepared in the queue (a), * otherwise the BG may fail to read from the queue when it sees the request bit set. * * - BG: (c) Read queue -> (d) Clear request bit * Since the BG cannot know the number of requests queued, it have to repeatedly check the * queue (c), until it find the data is empty, and then clear the request bit (d). * * The events are possible to happen in the order: (c) -> (a) -> (b) -> (d). This may cause a false * clear of the request bit. And there will be data prepared in the queue, but the request bit is * inactive. * * (e) move REQ bits to PEND bits, happen before (c) is introduced to solve this problem. In this * case (d) is changed to clear the PEND bit. Even if (e) -> (c) -> (a) -> (b) -> (d), only PEND * bit is cleared, while the REQ bit is still active. */ struct spi_bus_lock_dev_t; typedef struct spi_bus_lock_dev_t spi_bus_lock_dev_t; typedef struct spi_bus_lock_t spi_bus_lock_t; #define MAX_DEV_NUM 10 // Bit 29-20: lock bits, Bit 19-10: pending bits // Bit 9-0: request bits, Bit 30: #define LOCK_SHIFT 20 #define PENDING_SHIFT 10 #define REQ_SHIFT 0 #define WEAK_BG_FLAG BIT(30) /**< The bus is permanently requested by background operations. * This flag is weak, will not prevent acquiring of devices. But will help the BG to be re-enabled again after the bus is release. */ // get the bit mask wher bit [high-1, low] are all 1'b1 s. #define BIT1_MASK(high, low) ((UINT32_MAX << (high)) ^ (UINT32_MAX << (low))) #define LOCK_BIT(mask) ((mask) << LOCK_SHIFT) #define REQUEST_BIT(mask) ((mask) << REQ_SHIFT) #define PENDING_BIT(mask) ((mask) << PENDING_SHIFT) #define DEV_MASK(id) (LOCK_BIT(1<mask & REQ_MASK) #define DEV_PEND_MASK(dev) ((dev)->mask & PEND_MASK) #define DEV_BG_MASK(dev) ((dev)->mask & BG_MASK) struct spi_bus_lock_t { /** * The core of the lock. These bits are status of the lock, which should be always available. * No intermediate status is allowed. This is realized by atomic operations, mainly * `atomic_fetch_and`, `atomic_fetch_or`, which atomically read the status, and bitwise write * status value ORed / ANDed with given masks. * * The request bits together pending bits represent the actual bg request state of one device. * Either one of them being active indicates the device has pending bg requests. * * Whenever a bit is written to the status, it means the a device on a task is trying to * acquire the lock. But this will succeed only when no LOCK or BG bits active. * * The acquiring processor is responsible to call the scheduler to pass its role to other tasks * or the BG, unless it clear the last bit in the status register. */ //// Critical resources, they are only writable by acquiring processor, and stable only when read by the acquiring processor. atomic_uint_fast32_t status; spi_bus_lock_dev_t* volatile acquiring_dev; ///< The acquiring device bool volatile acq_dev_bg_active; ///< BG is the acquiring processor serving the acquiring device, used for the wait_bg to skip waiting quickly. bool volatile in_isr; ///< ISR is touching HW //// End of critical resources atomic_intptr_t dev[DEV_NUM_MAX]; ///< Child locks. bg_ctrl_func_t bg_enable; ///< Function to enable background operations. bg_ctrl_func_t bg_disable; ///< Function to disable background operations void* bg_arg; ///< Argument for `bg_enable` and `bg_disable` functions. spi_bus_lock_dev_t* last_dev; ///< Last used device, to decide whether to refresh all registers. int periph_cs_num; ///< Number of the CS pins the HW has. //debug information int host_id; ///< Host ID, for debug information printing uint32_t new_req; ///< Last int_req when `spi_bus_lock_bg_start` is called. Debug use. }; struct spi_bus_lock_dev_t { SemaphoreHandle_t semphr; ///< Binray semaphore to notify the device it claimed the bus spi_bus_lock_t* parent; ///< Pointer to parent spi_bus_lock_t uint32_t mask; ///< Bitwise OR-ed mask of the REQ, PEND, LOCK bits of this device }; DRAM_ATTR static const char TAG[] = "bus_lock"; #define LOCK_CHECK(a, str, ret_val, ...) \ if (!(a)) { \ ESP_LOGE(TAG,"%s(%d): "str, __FUNCTION__, __LINE__, ##__VA_ARGS__); \ return (ret_val); \ } static inline uint32_t mask_get_id(uint32_t mask); static inline uint32_t dev_lock_get_id(spi_bus_lock_dev_t *dev_lock); /******************************************************************************* * atomic operations to the status ******************************************************************************/ SPI_MASTER_ISR_ATTR static inline uint32_t lock_status_fetch_set(spi_bus_lock_t *lock, uint32_t set) { return atomic_fetch_or(&lock->status, set); } IRAM_ATTR static inline uint32_t lock_status_fetch_clear(spi_bus_lock_t *lock, uint32_t clear) { return atomic_fetch_and(&lock->status, ~clear); } IRAM_ATTR static inline uint32_t lock_status_fetch(spi_bus_lock_t *lock) { return atomic_load(&lock->status); } SPI_MASTER_ISR_ATTR static inline void lock_status_init(spi_bus_lock_t *lock) { atomic_store(&lock->status, 0); } // return the remaining status bits IRAM_ATTR static inline uint32_t lock_status_clear(spi_bus_lock_t* lock, uint32_t clear) { //the fetch and clear should be atomic, avoid missing the all '0' status when all bits are clear. uint32_t state = lock_status_fetch_clear(lock, clear); return state & (~clear); } /******************************************************************************* * Schedule service * * The modification to the status bits may cause rotating of the acquiring processor. It also have * effects to `acquired_dev` (the acquiring device), `in_isr` (HW used in BG), and * `acq_dev_bg_active` (wait_bg_end can be skipped) members of the lock structure. * * Most of them should be atomic, and special attention should be paid to the operation * sequence. ******************************************************************************/ SPI_MASTER_ISR_ATTR static inline void resume_dev_in_isr(spi_bus_lock_dev_t *dev_lock, BaseType_t *do_yield) { xSemaphoreGiveFromISR(dev_lock->semphr, do_yield); } IRAM_ATTR static inline void resume_dev(const spi_bus_lock_dev_t *dev_lock) { xSemaphoreGive(dev_lock->semphr); } SPI_MASTER_ISR_ATTR static inline void bg_disable(spi_bus_lock_t *lock) { BUS_LOCK_DEBUG_EXECUTE_CHECK(lock->bg_disable); lock->bg_disable(lock->bg_arg); } IRAM_ATTR static inline void bg_enable(spi_bus_lock_t* lock) { BUS_LOCK_DEBUG_EXECUTE_CHECK(lock->bg_enable); lock->bg_enable(lock->bg_arg); } // Set the REQ bit. If we become the acquiring processor, invoke the ISR and pass that to it. // The caller will never become the acquiring processor after this function returns. SPI_MASTER_ATTR static inline void req_core(spi_bus_lock_dev_t *dev_handle) { spi_bus_lock_t *lock = dev_handle->parent; // Though `acquired_dev` is critical resource, `dev_handle == lock->acquired_dev` // is a stable statement unless `acquire_start` or `acquire_end` is called by current // device. if (dev_handle == lock->acquiring_dev){ // Set the REQ bit and check BG bits if we are the acquiring processor. // If the BG bits were not active before, invoke the BG again. // Avoid competitive risk against the `clear_pend_core`, `acq_dev_bg_active` should be set before // setting REQ bit. lock->acq_dev_bg_active = true; uint32_t status = lock_status_fetch_set(lock, DEV_REQ_MASK(dev_handle)); if ((status & DEV_BG_MASK(dev_handle)) == 0) { bg_enable(lock); //acquiring processor passed to BG } } else { uint32_t status = lock_status_fetch_set(lock, DEV_REQ_MASK(dev_handle)); if (status == 0) { bg_enable(lock); //acquiring processor passed to BG } } } //Set the LOCK bit. Handle related stuff and return true if we become the acquiring processor. SPI_MASTER_ISR_ATTR static inline bool acquire_core(spi_bus_lock_dev_t *dev_handle) { spi_bus_lock_t* lock = dev_handle->parent; uint32_t status = lock_status_fetch_set(lock, dev_handle->mask & LOCK_MASK); // Check all bits except WEAK_BG if ((status & (BG_MASK | LOCK_MASK)) == 0) { //succeed at once lock->acquiring_dev = dev_handle; BUS_LOCK_DEBUG_EXECUTE_CHECK(!lock->acq_dev_bg_active); if (status & WEAK_BG_FLAG) { //Mainly to disable the cache (Weak_BG), that is not able to disable itself bg_disable(lock); } return true; } return false; } /** * Find the next acquiring processor according to the status. Will directly change * the acquiring device if new one found. * * Cases: * - BG should still be the acquiring processor (Return false): * 1. Acquiring device has active BG bits: out_desired_dev = new acquiring device * 2. No acquiring device, but BG active: out_desired_dev = randomly pick one device with active BG bits * - BG should yield to the task (Return true): * 3. Acquiring device has no active BG bits: out_desired_dev = new acquiring device * 4. No acquiring device while no active BG bits: out_desired_dev=NULL * * Acquiring device task need to be resumed only when case 3. * * This scheduling can happen in either task or ISR, so `in_isr` or `bg_active` not touched. * * @param lock * @param status Current status * @param out_desired_dev Desired device to work next, see above. * * @return False if BG should still be the acquiring processor, otherwise True (yield to task). */ IRAM_ATTR static inline bool schedule_core(spi_bus_lock_t *lock, uint32_t status, spi_bus_lock_dev_t **out_desired_dev) { spi_bus_lock_dev_t* desired_dev = NULL; uint32_t lock_bits = (status & LOCK_MASK) >> LOCK_SHIFT; uint32_t bg_bits = status & BG_MASK; bg_bits = ((bg_bits >> REQ_SHIFT) | (bg_bits >> PENDING_SHIFT)) & REQ_MASK; bool bg_yield; if (lock_bits) { int dev_id = mask_get_id(lock_bits); desired_dev = (spi_bus_lock_dev_t *)atomic_load(&lock->dev[dev_id]); BUS_LOCK_DEBUG_EXECUTE_CHECK(desired_dev); lock->acquiring_dev = desired_dev; bg_yield = ((bg_bits & desired_dev->mask) == 0); lock->acq_dev_bg_active = !bg_yield; } else { lock->acq_dev_bg_active = false; if (bg_bits) { int dev_id = mask_get_id(bg_bits); desired_dev = (spi_bus_lock_dev_t *)atomic_load(&lock->dev[dev_id]); BUS_LOCK_DEBUG_EXECUTE_CHECK(desired_dev); lock->acquiring_dev = NULL; bg_yield = false; } else { desired_dev = NULL; lock->acquiring_dev = NULL; bg_yield = true; } } *out_desired_dev = desired_dev; return bg_yield; } //Clear the LOCK bit and trigger a rescheduling. IRAM_ATTR static inline void acquire_end_core(spi_bus_lock_dev_t *dev_handle) { spi_bus_lock_t* lock = dev_handle->parent; uint32_t status = lock_status_clear(lock, dev_handle->mask & LOCK_MASK); spi_bus_lock_dev_t* desired_dev = NULL; bool invoke_bg = !schedule_core(lock, status, &desired_dev); if (invoke_bg) { bg_enable(lock); } else if (desired_dev) { resume_dev(desired_dev); } else if (status & WEAK_BG_FLAG) { bg_enable(lock); } } // Move the REQ bits to corresponding PEND bits. Must be called by acquiring processor. // Have no side effects on the acquiring device/processor. SPI_MASTER_ISR_ATTR static inline void update_pend_core(spi_bus_lock_t *lock, uint32_t status) { uint32_t active_req_bits = status & REQ_MASK; #if PENDING_SHIFT > REQ_SHIFT uint32_t pending_mask = active_req_bits << (PENDING_SHIFT - REQ_SHIFT); #else uint32_t pending_mask = active_req_bits >> (REQ_SHIFT - PENDING_SHIFT); #endif // We have to set the PEND bits and then clear the REQ bits, since BG bits are using bitwise OR logic, // this will not influence the effectiveness of the BG bits of every device. lock_status_fetch_set(lock, pending_mask); lock_status_fetch_clear(lock, active_req_bits); } // Clear the PEND bit (not REQ bit!) of a device, return the suggestion whether we can try to quit the ISR. // Lost the acquiring processor immediately when the BG bits for active device are inactive, indiciating by the return value. // Can be called only when ISR is acting as the acquiring processor. SPI_MASTER_ISR_ATTR static inline bool clear_pend_core(spi_bus_lock_dev_t *dev_handle) { bool finished; spi_bus_lock_t *lock = dev_handle->parent; uint32_t pend_mask = DEV_PEND_MASK(dev_handle); BUS_LOCK_DEBUG_EXECUTE_CHECK(lock_status_fetch(lock) & pend_mask); uint32_t status = lock_status_clear(lock, pend_mask); if (lock->acquiring_dev == dev_handle) { finished = ((status & DEV_REQ_MASK(dev_handle)) == 0); if (finished) { lock->acq_dev_bg_active = false; } } else { finished = (status == 0); } return finished; } // Return true if the ISR has already touched the HW, which means previous operations should // be terminated first, before we use the HW again. Otherwise return false. // In either case `in_isr` will be marked as true, until call to `bg_exit_core` with `wip=false` successfully. SPI_MASTER_ISR_ATTR static inline bool bg_entry_core(spi_bus_lock_t *lock) { BUS_LOCK_DEBUG_EXECUTE_CHECK(!lock->acquiring_dev || lock->acq_dev_bg_active); /* * The interrupt is disabled at the entry of ISR to avoid competitive risk as below: * * The `esp_intr_enable` will be called (b) after new BG request is queued (a) in the task; * while `esp_intr_disable` should be called (c) if we check and found the sending queue is empty (d). * If (c) happens after (d), if things happens in this sequence: * (d) -> (a) -> (b) -> (c), the interrupt will be disabled while there's pending BG request in the queue. * * To avoid this, interrupt is disabled here, and re-enabled later if required. (c) -> (d) -> (a) -> (b) -> revert (c) if !d */ bg_disable(lock); if (lock->in_isr) { return false; } else { lock->in_isr = true; return true; } } // Handle the conditions of status and interrupt, avoiding the ISR being disabled when there is any new coming BG requests. // When called with `wip=true`, means the ISR is performing some operations. Will enable the interrupt again and exit unconditionally. // When called with `wip=false`, will only return `true` when there is no coming BG request. If return value is `false`, the ISR should try again. // Will not change acquiring device. SPI_MASTER_ISR_ATTR static inline bool bg_exit_core(spi_bus_lock_t *lock, bool wip, BaseType_t *do_yield) { //See comments in `bg_entry_core`, re-enable interrupt disabled in entry if we do need the interrupt if (wip) { bg_enable(lock); BUS_LOCK_DEBUG_EXECUTE_CHECK(!lock->acquiring_dev || lock->acq_dev_bg_active); return true; } bool ret; uint32_t status = lock_status_fetch(lock); if (lock->acquiring_dev) { if (status & DEV_BG_MASK(lock->acquiring_dev)) { BUS_LOCK_DEBUG_EXECUTE_CHECK(lock->acq_dev_bg_active); ret = false; } else { // The request may happen any time, even after we fetched the status. // The value of `acq_dev_bg_active` is random. resume_dev_in_isr(lock->acquiring_dev, do_yield); ret = true; } } else { BUS_LOCK_DEBUG_EXECUTE_CHECK(!lock->acq_dev_bg_active); ret = !(status & BG_MASK); } if (ret) { //when successfully exit, but no transaction done, mark BG as inactive lock->in_isr = false; } return ret; } IRAM_ATTR static inline void dev_wait_prepare(spi_bus_lock_dev_t *dev_handle) { xSemaphoreTake(dev_handle->semphr, 0); } SPI_MASTER_ISR_ATTR static inline esp_err_t dev_wait(spi_bus_lock_dev_t *dev_handle, TickType_t wait) { BaseType_t ret = xSemaphoreTake(dev_handle->semphr, wait); if (ret == pdFALSE) return ESP_ERR_TIMEOUT; return ESP_OK; } /******************************************************************************* * Initialization & Deinitialization ******************************************************************************/ esp_err_t spi_bus_init_lock(spi_bus_lock_handle_t *out_lock, const spi_bus_lock_config_t *config) { spi_bus_lock_t* lock = (spi_bus_lock_t*)calloc(sizeof(spi_bus_lock_t), 1); if (lock == NULL) { return ESP_ERR_NO_MEM; } lock_status_init(lock); lock->acquiring_dev = NULL; lock->last_dev = NULL; lock->periph_cs_num = config->cs_num; lock->host_id = config->host_id; *out_lock = lock; return ESP_OK; } void spi_bus_deinit_lock(spi_bus_lock_handle_t lock) { for (int i = 0; i < DEV_NUM_MAX; i++) { assert(atomic_load(&lock->dev[i]) == (intptr_t)NULL); } free(lock); } static int try_acquire_free_dev(spi_bus_lock_t *lock, bool cs_required) { if (cs_required) { int i; for (i = 0; i < lock->periph_cs_num; i++) { intptr_t null = (intptr_t) NULL; //use 1 to occupy the slot, actual setup comes later if (atomic_compare_exchange_strong(&lock->dev[i], &null, (intptr_t) 1)) { break; } } return ((i == lock->periph_cs_num)? -1: i); } else { int i; for (i = DEV_NUM_MAX - 1; i >= 0; i--) { intptr_t null = (intptr_t) NULL; //use 1 to occupy the slot, actual setup comes later if (atomic_compare_exchange_strong(&lock->dev[i], &null, (intptr_t) 1)) { break; } } return i; } } esp_err_t spi_bus_lock_register_dev(spi_bus_lock_handle_t lock, spi_bus_lock_dev_config_t *config, spi_bus_lock_dev_handle_t *out_dev_handle) { if (lock == NULL) return ESP_ERR_INVALID_ARG; int id = try_acquire_free_dev(lock, config->flags & SPI_BUS_LOCK_DEV_FLAG_CS_REQUIRED); if (id == -1) return ESP_ERR_NOT_SUPPORTED; spi_bus_lock_dev_t* dev_lock = (spi_bus_lock_dev_t*)heap_caps_calloc(sizeof(spi_bus_lock_dev_t), 1, MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT); if (dev_lock == NULL) { return ESP_ERR_NO_MEM; } dev_lock->semphr = xSemaphoreCreateBinary(); if (dev_lock->semphr == NULL) { free(dev_lock); atomic_store(&lock->dev[id], (intptr_t)NULL); return ESP_ERR_NO_MEM; } dev_lock->parent = lock; dev_lock->mask = DEV_MASK(id); ESP_LOGV(TAG, "device registered on bus %d slot %d.", lock->host_id, id); atomic_store(&lock->dev[id], (intptr_t)dev_lock); *out_dev_handle = dev_lock; return ESP_OK; } void spi_bus_lock_unregister_dev(spi_bus_lock_dev_handle_t dev_handle) { int id = dev_lock_get_id(dev_handle); spi_bus_lock_t* lock = dev_handle->parent; BUS_LOCK_DEBUG_EXECUTE_CHECK(atomic_load(&lock->dev[id]) == (intptr_t)dev_handle); if (lock->last_dev == dev_handle) lock->last_dev = NULL; atomic_store(&lock->dev[id], (intptr_t)NULL); if (dev_handle->semphr) { vSemaphoreDelete(dev_handle->semphr); } free(dev_handle); } IRAM_ATTR static inline uint32_t mask_get_id(uint32_t mask) { return ID_DEV_MASK(mask); } IRAM_ATTR static inline uint32_t dev_lock_get_id(spi_bus_lock_dev_t *dev_lock) { return mask_get_id(dev_lock->mask); } void spi_bus_lock_set_bg_control(spi_bus_lock_handle_t lock, bg_ctrl_func_t bg_enable, bg_ctrl_func_t bg_disable, void *arg) { lock->bg_enable = bg_enable; lock->bg_disable = bg_disable; lock->bg_arg = arg; } IRAM_ATTR int spi_bus_lock_get_dev_id(spi_bus_lock_dev_handle_t dev_handle) { return (dev_handle? dev_lock_get_id(dev_handle): -1); } //will be called when cache disabled IRAM_ATTR bool spi_bus_lock_touch(spi_bus_lock_dev_handle_t dev_handle) { spi_bus_lock_dev_t* last_dev = dev_handle->parent->last_dev; dev_handle->parent->last_dev = dev_handle; if (last_dev != dev_handle) { int last_dev_id = (last_dev? dev_lock_get_id(last_dev): -1); ESP_DRAM_LOGV(TAG, "SPI dev changed from %d to %d", last_dev_id, dev_lock_get_id(dev_handle)); } return (dev_handle != last_dev); } /******************************************************************************* * Acquiring service ******************************************************************************/ IRAM_ATTR esp_err_t spi_bus_lock_acquire_start(spi_bus_lock_dev_t *dev_handle, TickType_t wait) { LOCK_CHECK(wait == portMAX_DELAY, "timeout other than portMAX_DELAY not supported", ESP_ERR_INVALID_ARG); spi_bus_lock_t* lock = dev_handle->parent; // Clear the semaphore before checking dev_wait_prepare(dev_handle); if (!acquire_core(dev_handle)) { //block until becoming the acquiring processor (help by previous acquiring processor) esp_err_t err = dev_wait(dev_handle, wait); //TODO: add timeout handling here. if (err != ESP_OK) return err; } ESP_DRAM_LOGV(TAG, "dev %d acquired.", dev_lock_get_id(dev_handle)); BUS_LOCK_DEBUG_EXECUTE_CHECK(lock->acquiring_dev == dev_handle); //When arrives at here, requests of this device should already be handled uint32_t status = lock_status_fetch(lock); (void) status; BUS_LOCK_DEBUG_EXECUTE_CHECK((status & DEV_BG_MASK(dev_handle)) == 0); return ESP_OK; } IRAM_ATTR esp_err_t spi_bus_lock_acquire_end(spi_bus_lock_dev_t *dev_handle) { //release the bus spi_bus_lock_t* lock = dev_handle->parent; LOCK_CHECK(lock->acquiring_dev == dev_handle, "Cannot release a lock that hasn't been acquired.", ESP_ERR_INVALID_STATE); acquire_end_core(dev_handle); ESP_LOGV(TAG, "dev %d released.", dev_lock_get_id(dev_handle)); return ESP_OK; } SPI_MASTER_ISR_ATTR spi_bus_lock_dev_handle_t spi_bus_lock_get_acquiring_dev(spi_bus_lock_t *lock) { return lock->acquiring_dev; } /******************************************************************************* * BG (background operation) service ******************************************************************************/ SPI_MASTER_ISR_ATTR bool spi_bus_lock_bg_entry(spi_bus_lock_t* lock) { return bg_entry_core(lock); } SPI_MASTER_ISR_ATTR bool spi_bus_lock_bg_exit(spi_bus_lock_t* lock, bool wip, BaseType_t* do_yield) { return bg_exit_core(lock, wip, do_yield); } SPI_MASTER_ATTR esp_err_t spi_bus_lock_bg_request(spi_bus_lock_dev_t *dev_handle) { req_core(dev_handle); return ESP_OK; } IRAM_ATTR esp_err_t spi_bus_lock_wait_bg_done(spi_bus_lock_dev_handle_t dev_handle, TickType_t wait) { spi_bus_lock_t *lock = dev_handle->parent; LOCK_CHECK(lock->acquiring_dev == dev_handle, "Cannot wait for a device that is not acquired", ESP_ERR_INVALID_STATE); LOCK_CHECK(wait == portMAX_DELAY, "timeout other than portMAX_DELAY not supported", ESP_ERR_INVALID_ARG); // If no BG bits active, skip quickly. This is ensured by `spi_bus_lock_wait_bg_done` // cannot be executed with `bg_request` on the same device concurrently. if (lock_status_fetch(lock) & DEV_BG_MASK(dev_handle)) { // Clear the semaphore before checking dev_wait_prepare(dev_handle); if (lock_status_fetch(lock) & DEV_BG_MASK(dev_handle)) { //block until becoming the acquiring processor (help by previous acquiring processor) esp_err_t err = dev_wait(dev_handle, wait); //TODO: add timeout handling here. if (err != ESP_OK) return err; } } BUS_LOCK_DEBUG_EXECUTE_CHECK(!lock->acq_dev_bg_active); BUS_LOCK_DEBUG_EXECUTE_CHECK((lock_status_fetch(lock) & DEV_BG_MASK(dev_handle)) == 0); return ESP_OK; } SPI_MASTER_ISR_ATTR bool spi_bus_lock_bg_clear_req(spi_bus_lock_dev_t *dev_handle) { bool finished = clear_pend_core(dev_handle); ESP_EARLY_LOGV(TAG, "dev %d served from bg.", dev_lock_get_id(dev_handle)); return finished; } SPI_MASTER_ISR_ATTR bool spi_bus_lock_bg_check_dev_acq(spi_bus_lock_t *lock, spi_bus_lock_dev_handle_t *out_dev_lock) { BUS_LOCK_DEBUG_EXECUTE_CHECK(!lock->acquiring_dev); uint32_t status = lock_status_fetch(lock); return schedule_core(lock, status, out_dev_lock); } SPI_MASTER_ISR_ATTR bool spi_bus_lock_bg_check_dev_req(spi_bus_lock_dev_t *dev_lock) { spi_bus_lock_t* lock = dev_lock->parent; uint32_t status = lock_status_fetch(lock); uint32_t dev_status = status & dev_lock->mask; // move REQ bits of all device to corresponding PEND bits. // To reduce executing time, only done when the REQ bit of the calling device is set. if (dev_status & REQ_MASK) { update_pend_core(lock, status); return true; } else { return dev_status & PEND_MASK; } } SPI_MASTER_ISR_ATTR bool spi_bus_lock_bg_req_exist(spi_bus_lock_t *lock) { uint32_t status = lock_status_fetch(lock); return status & BG_MASK; } /******************************************************************************* * Static variables of the locks of the main flash ******************************************************************************/ #if CONFIG_SPI_FLASH_SHARE_SPI1_BUS static spi_bus_lock_dev_t lock_main_flash_dev; static spi_bus_lock_t main_spi_bus_lock = { /* * the main bus cache is permanently required, this flag is set here and never clear so that the * cache will always be enabled if acquiring devices yield. */ .status = ATOMIC_VAR_INIT(WEAK_BG_FLAG), .acquiring_dev = NULL, .dev = {ATOMIC_VAR_INIT((intptr_t)&lock_main_flash_dev)}, .new_req = 0, .periph_cs_num = SOC_SPI_PERIPH_CS_NUM(0), }; const spi_bus_lock_handle_t g_main_spi_bus_lock = &main_spi_bus_lock; esp_err_t spi_bus_lock_init_main_bus(void) { spi_bus_main_set_lock(g_main_spi_bus_lock); return ESP_OK; } static StaticSemaphore_t main_flash_semphr; static spi_bus_lock_dev_t lock_main_flash_dev = { .semphr = NULL, .parent = &main_spi_bus_lock, .mask = DEV_MASK(0), }; const spi_bus_lock_dev_handle_t g_spi_lock_main_flash_dev = &lock_main_flash_dev; esp_err_t spi_bus_lock_init_main_dev(void) { g_spi_lock_main_flash_dev->semphr = xSemaphoreCreateBinaryStatic(&main_flash_semphr); if (g_spi_lock_main_flash_dev->semphr == NULL) { return ESP_ERR_NO_MEM; } return ESP_OK; } #else //CONFIG_SPI_FLASH_SHARE_SPI1_BUS //when the dev lock is not initialized, point to NULL const spi_bus_lock_dev_handle_t g_spi_lock_main_flash_dev = NULL; #endif