Commit graph

48 commits

Author SHA1 Message Date
Michael (XIAO Xufeng)
6f6677ac42 spi: move deprecated functions into internal header
Resolves https://github.com/espressif/esp-idf/issues/4132
2019-12-24 17:43:32 +08:00
Angus Gratton
510ec904c9 spi_flash tests: Fix exclusion of new API tests in legacy mode 2019-12-11 15:57:49 +11:00
Michael (XIAO Xufeng)
337b1df430 esp_flash: add unit test for external flash and QE toggling
Tests for external flash chips used to controlled by macros, one bin for
one chip. And tests are done manually. This commit refactored the test
so that all 3 chips can all run in single test.
2019-11-21 12:26:15 +08:00
Michael (XIAO Xufeng)
2b7681ec4f esp_flash: fix set qe bit and write command issues
There used to be dummy phase before out phase in common command
transactions. This corrupts the data.

The code before never actually operate (clear) the QE bit, once it finds
the QE bit is set. It's hard to check whether the QE set/disable
functions work well.

This commit:

1. Cancel the dummy phase

2. Set and clear the QE bit according to chip settings, allowing tests
   for QE bits. However for some chips (Winbond for example), it's not
   forced to clear the QE bit if not able to.

3. Also refactor to allow chip_generic and other chips to share the same
   code to read and write qe bit; let common command and read command share
   configure_host_io_mode.

4. Rename read mode to io mode since maybe we will write data with quad
   mode one day.
2019-11-21 12:26:14 +08:00
Ajita Chavan
32b8b60dc5 flash_ops: fix spi_flash_read with source buffer not from internal memory and size < 16
Closes https://github.com/espressif/esp-idf/issues/4010
2019-10-19 15:00:00 +08:00
Michael (XIAO Xufeng)
b9a2639ab4 esp_flash: add support for encrypted read and write
Using legacy implementation.
2019-09-16 17:10:08 +08:00
Ivan Grokhotkov
b17ca9cb38 unit-test-app: add config with flash encryption enabled 2019-09-10 17:20:19 +02:00
Ivan Grokhotkov
801010dac6 spi_flash: fix mmap unit tests for flash encryption 2019-09-10 17:20:19 +02:00
Michael (XIAO Xufeng)
1cc860216e esp_flash: fix the set/get write protection functions
Add support for get write protection support, fixed the duplicated
set_write_protection link.

All the write_protection check in the top layer are removed. The lower
levels (chip) should ensure to disable write protection before the
operation start.
2019-08-20 14:05:35 +08:00
Ivan Grokhotkov
ec427a5b43 spi_flash: support for partitions in external flash 2019-07-02 10:26:06 +02:00
Michael (XIAO Xufeng)
d6bd24ca67 esp_flash: add initialization interface for SPI devices 2019-06-27 13:27:27 +08:00
Renz Christian Bagaporo
9eccd7c082 components: use new component registration api 2019-06-21 19:53:29 +08:00
Michael (XIAO Xufeng)
1036a091fe spi_flash: support working on differnt buses and frequency 2019-06-18 06:32:52 +00:00
Angus Gratton
ce4de867d6 spi_flash: New low-level flash API 2019-06-18 06:32:52 +00:00
Roland Dobai
22d070e0af spi_flash: Rename long Kconfig options 2019-06-12 08:03:07 +02:00
Konstantin Kondrashov
399d2d2605 all: Using xxx_periph.h
Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... .

Cleaned up header files from unnecessary headers (releated to soc/... headers).
2019-06-03 14:15:08 +08:00
Roland Dobai
0ae53691ba Rename Kconfig options (components/esp32) 2019-05-21 09:09:01 +02:00
morris
c159984264 separate rom from esp32 component to esp_rom
1. separate rom include files and linkscript to esp_rom
2. modefiy "include rom/xxx.h" to "include esp32/rom/xxx.h"
3. Forward compatible
4. update mqtt
2019-03-21 18:51:45 +08:00
Mahavir Jain
16adb9d62a spi_flash: add test case for stale read issue on memory mapped partition 2019-03-13 05:38:01 +00:00
Ivan Grokhotkov
6091021e83 unity: separate common and IDF specific functionality
New unity component can be used for testing other applications.
Upstream version of Unity is included as a submodule.
Utilities specific to ESP-IDF unit tests (partitions, leak checking
setup/teardown functions, etc) are kept only in unit-test-app.
Kconfig options are added to allow disabling certain Unity features.
2018-11-19 12:36:31 +08:00
Renz Bagaporo
cc774111bf cmake: Add support for test build 2018-10-20 12:07:24 +08:00
Ivan Grokhotkov
f9f2937694 spi_flash: raise priority of the task performing spi_flash operation
The fix is for the situation when cache disabling mechanism causes
a deadlock with user tasks. Situation is as follows:

1. spi_flash operation is started from low-priority task on CPU0
2. It uses IPC to wake up high-priority IPC1 task on CPU1, preventing
   all other tasks on CPU1 from running. This is needed to safely
   disable the cache.
3. While the task which started spi_flash operation is waiting for IPC1
   task to acknowledge that CPU1 is not using cache anymore, it is
   preempted by a higher priority application task ("app0").
4. Task app0 busy-waits for some operation on CPU1 to complete. But
   since application tasks are blocked out by IPC1 task, this never
   happens. Since app0 is busy-waiting, the task doing spi flash
   operation never runs.

The more or less logical soltion to the problem would be to also do
cache disabling on CPU0 and the SPI flash operation itself from IPC0
task. However IPC0 task stack would need to be increased to allow doing
SPI flash operation (and IPC1 stack as well). This would waste some
memory. An alternative approach adopted in this fix is to call FreeRTOS
functions to temporary increase the priority of SPI flash operation task
to the same level as the IPC task.

Fixes https://github.com/espressif/arduino-esp32/issues/740
Fixes https://github.com/espressif/esp-idf/issues/1157
2018-07-01 20:44:42 +08:00
Tian Zhong Xing
49a236dae0 fix CI failed when flash chip size if 2MBytes 2018-03-29 17:48:59 +08:00
Tian Zhong Xing
fa68774344 spi_flash:
1. add test code for new api
2. resolve some comments
2018-03-26 10:24:42 +08:00
Angus Gratton
670733df9f spi_flash: Abort on writes to dangerous regions (bootloader, partition table, app)
Can be disabled or made into a failure result in kconfig if needed.
2017-11-03 15:52:27 -07:00
Ivan Grokhotkov
8990549e89 spi_flash: fix spi_flash_read into buffer in external RAM, add test 2017-10-19 21:35:21 +08:00
Ivan Grokhotkov
cc67500d3e unit test: adapt tests to single core configuration 2017-10-19 21:35:21 +08:00
Jeroen Domburg
113bb30218 This commit adds spi_flash_mmap_pages(), a function to map a set of unordered 64K pages in flash into a contiguous region in memory space. 2017-06-23 14:28:57 +08:00
Angus Gratton
11d2db40f4 spi_flash: Fix SPI flash write alignment/size bugs
* Writing >4 bytes to unaligned offsets would fail
* Writiing data from flash would fail (wrong buffer was used)
* Writing >8192 bytes from RAM would over-write data multiple times

Adds test cases for the above.
2017-06-09 17:33:27 +10:00
Ivan Grokhotkov
af0ecca492 add test case for invalid cache access interrupt 2017-04-13 15:27:39 +08:00
Alexey Gerenkov
0860f46220 spi_flash: Fixed bug in SPI flash ROM driver to work with embedded flash chip
1) fixed SPI_read_status: added check for flash busy flag in matrix mode
2) fixed SPI_page_program: enable write before writing data to SPI FIFO
3) SPI flash ROM funcs replacement is controlled via menuconfig option
2017-04-11 10:51:19 +08:00
Ivan Grokhotkov
92436021ab spi_flash: fix race condition in s_flash_op_complete access
Flash operation complete flag was cleared by the core initiating flash
operation. If the other core was running an ISR, then IPC task could
be late to enter the loop to check s_flash_op_complete by the time next
flash operation started. If the flag is cleared on the CPU waiting on
this flag, then the race condition can not happen.
2017-03-28 01:34:17 +08:00
Angus Gratton
d8fda48551 spi_flash: Split large SPI flash operations into parts, allowing preemption
* Erase range operations allow preemption after each block or sector.
* Write operations allow preemption every 8KB of data.
* Reado operations allow preemption every 16KB of data.
2017-03-22 15:35:54 +08:00
Ivan Grokhotkov
d790300215 spi_flash: fix stale data being read from mmaped region
The issue that cache entries are not invalidated correctly sometimes
can also be reproduced for non-encrypted flash as well.
This change updates the workaround to do Cache_Flush, enabling it for
non-encrypted flash, and adds a unit test.
2017-03-04 17:48:44 +08:00
Angus Gratton
3442d4d463 spi_flash: Add spi_flash_cache_enabled() test function 2017-03-03 15:33:23 +11:00
Ivan Grokhotkov
8911e666a0 Merge branch 'feature/docs_partition_ota_flash' into 'master'
Partition/SPI/OTA docs & OTA new functionality

* Update partition, SPI flash & OTA docs to reflect functionality changes
* Refactor OTA implementation to perform checks mentioned in API doc
* Add new functions to OTA API: esp_ota_get_running_partition() & esp_ota_get_next_update_partition() functions
* Add spi_flash_cache2phys() & spi_flash_phys2cache() functions to support esp_ota_get_running_partition()


See merge request !513
2017-03-03 11:27:01 +08:00
Ivan Grokhotkov
75115e1d83 spi_flash: fix mmap not working for SPI_FLASH_MMAP_INST 2017-02-24 21:50:05 +08:00
Angus Gratton
f687725e97 unit tests: Use a unit test app partition table, configure spi_flash to use data partition 2017-02-22 10:26:04 +11:00
Angus Gratton
6a2d152086 spi_flash tests: Refactor mmap tests to be run in any order 2017-02-22 10:22:50 +11:00
Angus Gratton
093dd98101 spi_flash: Add new phys2cache & cache2phys functions to query flash cache mappings 2017-02-22 10:22:50 +11:00
Ivan Grokhotkov
e76c187efb spi_flash: protect esp_intr_noniram_{disable,enable} in 1-core config
MR !441 (7c155ab) has fixed issue with esp_intr_noniram_{disable,enable}
calls not being properly protected by spi_flash_op_{lock,unlock}.
Unit test was added, but the unit test environment tests only dual-core
config. Similar issue was present in the code path for the single-core
config, where esp_intr_noniram_{disable,enable} calls were unprotected.

This change fixes the protection issue and updates the unit test to
run properly in single core config as well.

The issue with running unit tests for single core config will be
addressed in a separate MR.
2017-02-21 21:57:53 +08:00
Angus Gratton
adc590ff69 spi_flash_write_encrypted: Allow 16-byte aligned block writes
As each 32 byte write has two identical 16 byte AES blocks, it's
possible to write them separately.
2017-01-20 19:48:46 +08:00
Angus Gratton
36ccdee6ec spi_flash: Flush flash cache if flash_mmap()ing a written-to page
Without this, it's possible for stale information to be read from
cache via mmap, even if the MMU table entry had been invalidated
prior to writing flash (if  the same MMU table entry was re-used after
writing flash.)
2017-01-20 19:48:46 +08:00
Ivan Grokhotkov
7c155ab647 Merge branch 'bugfix/flash_op_unpinned_task' into 'master'
fixes for issues observed when using spi_flash

This MR fixes three unrelated issues:

- Race condition in spi_flash_enable_interrupts_caches_and_other_cpu
  when operations on unpinned tasks are performed.
  The issue is reported in https://github.com/espressif/esp-idf/pull/258

- esp_intr_noniram_disable doesn’t disable interrupts when compiled in
  release mode. This issue manifested itself with an illegal instruction
  exception when task WDT ISR was called at the time when flash was
  disabled.
  Fixes https://github.com/espressif/esp-idf/issues/263.

- Tick hooks on CPU1 were not called if CPU0 scheduler was disabled for
  significant amount of time (which could happen when doing flash erase).
  The issue manifested itself as “INT WDT timeout on core 1” error.
  Fixes https://github.com/espressif/esp-idf/issues/219.

See merge request !441
2017-01-19 10:14:34 +08:00
antti
f8b5c29346 esp32: add [ignore] tag to some unit test cases for CI
Add ignore tag on unit test cases that are not supported in CI yet
2017-01-18 17:08:20 +08:00
Ivan Grokhotkov
4676d159ad spi_flash: fix race condition when doing operations in unpinned tasks
spi_flash_enable_interrupts_caches_and_other_cpu function used to enable
non-IRAM interrupts after giving up flash operation lock, which would
cause problems if another task was waiting on the lock to start a flash
operation. In fact, non-IRAM interrupts should be re-enabled before the
task scheduler is resumed. Otherwise non-pinned task can be moved to the
other CPU due to preemption, causing esp_intr_noniram_enable to be
called on the other CPU, causing an abort to be triggered.

Fixes the issue reported in
https://github.com/espressif/esp-idf/pull/258
2017-01-18 15:07:27 +08:00
Deomid Ryabkov
d288a3d053 Remove alignment reqs from spi_flash_{read,write} 2016-12-15 10:07:31 +11:00
antti
d390449371 add unit tests to esp-idf
rename nvs host test folder, modify .gitlab-ci.yml

remove unit-test-app build

re-format unit test files

remove extra newlines in project.mk

some refactoring for unit test part in project.mk

add build files of unit-test-app in gitignore

add README.md for unit test app

correct headings in README.md

remove files and make minor tweaks in unit test app

update .gitlab-ci.yml to use unit test app

delete unused lines in component_wrapper.mk

delete periph_i2s.h and lcd test

add text floating point in components/esp32/test/Kconfig

correct idf test build paths in .gitlab-ci.yml
2016-11-22 14:45:50 +08:00