Commit graph

43 commits

Author SHA1 Message Date
suda-morris
dc4c16f475 ethernet: add kconfig help for GPIO0 output mode
1. add kconfig help for GPIO0 output mode
2. fix a bug when select gpio0 output mode and initialize psram
3. make default config to official development board
4. fix wrong LAN8720 register index
2019-10-08 02:41:40 +00:00
suda-morris
5b8d1c9da3 add promiscuous mode control in emac driver
1. add promiscuous mode control in emac driver
2. fix minor bugs in IP101 driver
2019-05-10 12:56:24 +08:00
morris
7528dc0f20 ethernet: support new PHY (IP101)
1. Add support for new PHY IP101.
2. Re-enable GPIO0 output mode.
3. Clean up some docs.
2019-01-29 14:08:35 +08:00
morris
dc043109d7 ethernet: phy init timeout
When ethernet enable again after disable it before, phy init will report timeout.
The cause of this problem is that the enabling of emac clock is too late, and should be placed before phy init.
2018-12-04 17:13:48 +08:00
morris
eec6de57ff ethernet: multi-call failure in esp_eth_init
Because of incomplete state machine, ethernet driver will broken if esp_eth_init is called twice.
Detailed information here: https://ezredmine.espressif.cn:8765/issues/27332
2018-11-13 16:38:45 +08:00
morris
5fccb73f86 ethernetif: fix potential memory leak
1. If L2_TO_L3_RX_BUF_MODE is not selected, we must assign l2_owner explictly before we call pbuf_free.
2. free intr resource in esp_eth_deinit

Closes https://github.com/espressif/esp-idf/issues/2670
2018-11-13 10:11:48 +08:00
morris
b6d7675e60 ethernet: fix some bugs in phy&mac driver
1. Original register mapping for LAN8720 has some registers that doesn't exist/support.
So just remove them, and fix the power and init function for LAN8720.
2. GPIO16 and GPIO17 is occupied by PSRAM, so only ETH_CLOCK_GPIO_IN mode is supported in that case if using PSRAM.
3. Fix bug of OTA failing with Ethernet
4. Fix bug of multicast with Ethernet

Closes https://github.com/espressif/esp-idf/issues/2564
Closes https://github.com/espressif/esp-idf/issues/2620
Closes https://github.com/espressif/esp-idf/issues/2657
2018-11-06 11:07:22 +08:00
morris
20b7f0ec87 ethernet: fix infinite loop when init phy or reset mac
1. fix infinite loop problem when init phy device
2. fix infinite loop problem when reset mac
3. fix little bugs in ethernetif_init
4. fix incompatible return value between lwip and esp-idf

Closes https://github.com/espressif/esp-idf/issues/2331
Closes https://github.com/espressif/esp-idf/issues/2141
2018-09-20 10:09:38 +08:00
morris
3063a62e3e ethernet: fix some bugs in ethernet driver
1. create a new pbuf to squash linked pbuf
2. optimize emac driver by adding ESP_IRAM_ATTR
3. remove duplicated function declare in esp_eth.h
4. remove duplicated code in emac_setup_tx_desc
5. disable Promiscuous mode
2018-09-17 10:12:46 +08:00
Angus Gratton
4eeed31a04 Merge branch 'feature/cmake' into 'master'
Merge experimental CMake support to master

See merge request idf/esp-idf!3024
2018-09-07 13:44:17 +08:00
morris
161a506f00 ethernet: enlarge ethernet task stack size
1. In original driver, the stack size for emac driver task "emacT" is only 2048 Bytes, which also can not be changed by user.
2. Each time when invoking "emac_start" function, it will reset emac registers, the driver should reconfig some important registers again.
2018-09-07 10:16:34 +08:00
Angus Gratton
a9c4ed7139 Merge branch 'master' into feature/cmake 2018-08-30 18:51:01 +08:00
morris
ec07112f5b ethernet: support esp_eth_deinit
1. change static emac-dma memory to dynamic
2. add esp_eth_deinit
3. modify ethernet example
4. add testcase for ethernet deinit function
5. GPIO0 could not output the 50MHz clock to PHY, so remove this configuration
2018-08-28 12:18:48 +08:00
Angus Gratton
ff2404a272 Merge branch 'master' into feature/cmake 2018-08-16 17:14:17 +10:00
Angus Gratton
6b9784cc45 Merge branch 'master' into feature/cmake_update 2018-05-31 14:46:23 +10:00
Angus Gratton
c7f19e76d7 docs: Move main docs to cover CMake
Add "GNU Make build system" doc with "cheat sheet" for moving to new system
2018-05-07 18:45:49 +08:00
shangke
5fc130f2c0 update emac_reg_v2.h 2018-04-25 14:54:09 +08:00
shangke
710e69feca emac:add set_eth_mac api 2017-12-15 17:15:53 +08:00
shangke
d46dcaf9e5 component/emac: fix process rx err 2017-11-15 11:04:32 +08:00
Frank Sautter
f324458b6a feat(emac): add support for emac to use internal (APLL) clock outputs. 2017-11-13 14:18:58 +08:00
Ivan Grokhotkov
266d2b3e4f ethernet: lock APB frequency while ethernet is enabled 2017-10-18 14:37:22 +08:00
Ivan Grokhotkov
e93c33050e ethernet: enable EMAC module clock on initialization 2017-09-04 22:43:52 +08:00
Kedar Sovani
8348a71847 ethernet: remove CONFIG_ETHERNET
1. Hello World application shows no footprint difference before and
after this change
2. examples/ethernet/ethernet application compiles properly (can't
test with my board)
2017-08-18 08:31:43 +05:30
shangke
01a2c31e1f change copy right 2017-08-04 14:56:58 +08:00
shangke
05aa09fbb9 beautify the code 2017-08-04 14:24:44 +08:00
shangke
1e6f904d38 add comments for rx list 2017-08-03 14:44:22 +08:00
shangke
ae571ddddf fix rx buf 2017-08-01 11:59:57 +08:00
Liu Zhi Fu
9ae5c6700b lwip/ethernet: fix emac rx buf err
1. Lwip not free the ethernet buf in lwip layer
2. Fix emac counter error
2017-07-25 11:19:31 +08:00
Alexey Gerenkov
8d43859b6a esp32: SEGGER SystemView Tracing Support
Implements support for system level traces compatible with SEGGER
SystemView tool on top of ESP32 application tracing module.
That kind of traces can help to analyse program's behaviour.
SystemView can show timeline of tasks/ISRs execution, context switches,
statistics related to the CPUs' load distribution etc.

Also this commit adds useful feature to ESP32 application tracing module:
 - Trace data buffering is implemented to handle temporary peaks of events load
2017-06-27 20:52:43 +03:00
Angus Gratton
453b5ded1d ethernet: Add convenience functions esp_eth_smi_wait_value() & esp_eth_smi_wait_set()
Covers the common case of waiting for a particular PHY register to have a particular value.
2017-04-20 18:03:00 +10:00
Angus Gratton
453722ba54 ethernet: Refactor PHY support to be part of ethernet component
Move generic PHY support into its own interface
2017-04-20 18:03:00 +10:00
alarruskain
eba6789e6c Fix late argument verification in emac-main
Prevent crash when emac_phy_power_enable is not set.

Merges #426 https://github.com/espressif/esp-idf/pull/426
2017-03-22 15:12:12 +08:00
XiaXiaotian
23f933a78d mac address: add user set mac address
add menuconfig for user to set mac address of wifi, bt and ethernet.
2017-03-01 20:42:46 +08:00
shangke
9893b71096 ethernet: add a gpio to enable/disable phy power 2017-02-11 15:19:53 +08:00
shangke
627bc23b1c ethernet:disable flow control when select l2_to_l3_copy_mode 2017-02-06 11:19:16 +08:00
shangke
2ea4d7fd02 ethernet: limit rx buf num when flow ctrl enable. 2017-01-19 16:45:30 +08:00
shangke
53b0b03e63 esp_event: event stack overflow 2017-01-16 17:06:12 +08:00
shangke
0e701e1cac ethernet: support flow control 2017-01-10 15:19:18 +08:00
shangke
489701eb2d ethernet : fix sometimes ethernet init fail bug 2017-01-06 13:49:42 +08:00
Angus Gratton
06e03ff52e Replace backwards-compatible portTICK_RATE_MS with FreeRTOS v8+ portTICK_PERIOD_MS
Closes github #51 https://github.com/espressif/esp-idf/issues/51
2016-12-28 10:23:13 +11:00
shangke
5ddf6daa98 feature/ethernet_driver: update ethernet driver
1. The transmitting mode of the packets from LWIP to MAC is changed from synchronous to asynchronous.
2. The receive buf mode : support pointer mode and copy mode.
3. Add get phy status func used to config mac register.
2016-12-26 14:50:49 +08:00
Jeroen Domburg
655fd2986a Add interrupt allocation scheme / interrupt sharing. Also modifies drivers and examples. Also allows interrupts
to be marked specifically as having a handler that's all in IRAM.
2016-12-08 12:39:33 +08:00
shangke
e0040af7e5 ethernet: add first version of ethernet driver 2016-12-01 19:17:48 +08:00