1. ref_clock used in unit tests occasionally produces time off by ~100
microseconds shortly after being started. Add a delay to let
ref_clock stabilise, until the cause is found.
2. Reduce roundoff error accumulation which would occasionally cause
the test to fail, by choosing an overflow value which can be divided
by APB frequency.
3. Move time sampling part of the test into an IRAM function to
reduce variations due to cache behavior.
4. Remove calculation of "standard deviation" in the test, as what was
calculated was not actually standard deviation, and it did not add any
useful information.
1. call esp_timer_get_time and ref_clock_get in the same order on
start and in the loop
2. disable interrupts when calculating delta between ref_clock
and esp_timer
3. ensure both functions are in cache before calculating the delta
In the situation when bootloader was compiled for 240MHz, and app was
compiled for 160MHz, and the chip is a revision 0 chip, the
bootloader will assume that the application has also been running at
240MHz. This will cause the chip to lock up later. Modify this to use
a run time check of DPORT_CPUPERIOD_SEL, which indicates which of the
PLL frequencies was used.
Closes https://github.com/espressif/esp-idf/issues/2731.
1. When one of the COMPONENT_DIRS points to a component directory
(i.e. a directory containing component.mk, not a directory of multiple
components), and there is a subdirectory in it which also contains
a component, the subdirectory was mistakenly added to the list of
components and compiled.
For example:
main/
component.mk
main.c
test/
component.mk
test_main.c
Would compile test_main.c and link libtest.a.
2. When one of the COMPONENT_DIRS points to a component directory, and
the parent directory contained a directory with the same name as
another component, that directory would be mistakenly added to the
COMPONENT_PATHS.
For example:
esp/
esp-idf/
esp32/
(random stuff)
mycomponent/
component.mk
mycomponent.c
myproject/
main/
Makefile
and Makefile sets EXTRA_COMPONENT_DIRS=$(realpath ../mycomponent),
then "esp32" directory which is at the same level as mycomponent
was added to COMPONENT_PATHS.
3. If EXTRA_COMPONENT_DIRS pointed to a directory with a list of
components, and one of the subdirectories was not a component, but
had the same name as another component, than that directory would be
mistakenly added to COMPONENT_PATHS instead of the real esp32
component directory.
For example:
my_components/
my_component/
component.mk
my_component.c
esp32/
(some random stuff)
and EXTRA_COMPONENT_DIRS would point to my_components/, then "esp32"
directory would be added to COMPONENT_PATHS instead of the real esp32
component directory.
1. In original driver, the stack size for emac driver task "emacT" is only 2048 Bytes, which also can not be changed by user.
2. Each time when invoking "emac_start" function, it will reset emac registers, the driver should reconfig some important registers again.
Closes https://github.com/espressif/esp-idf/issues/3025
1. Add missing get function to RMT API: rmt_get_idle_level().
2. Suppress error message from rmt_wait_tx_done() if wait_time==0 (allows for polling).
3. Remove the blank lines between parameter lists.
Merges https://github.com/espressif/esp-idf/pull/2666
fix 3 bugs:
1. do BLE connect (both of slave and master), it mgiht cause crash due to there's much interrupts happens effect ble code running, for example, wifi run on the same core as bluetooth controller and wifi run throughtput test.
2. do BLE scan stop or adv stop or connection stop, it might cause ASSERT or crash due to memory corrupted in controller memory poll.
3. minor bug fix, not really effect bluetooth.
Make the same output as for v3.2 and 3.3 for idf_size.py --archives /path/to/file.map
and also for idf_size.py --archive_details libhap_min.a
/path/to/file.map
Closes: TW28774
The bug will cause memory corrupted (the largest range is from 0x3ffc0000 ~ 0x3ffc8000),
some strange error will happen, like IllegalInstruction, LoadProhibited and .etc.
Fix following WiFi bugs:
1. Fix a crash bug which is caused by WiFi static TX buffer alloc/free.
2. Fix the bug that iphone fails to connect to ESP32 AP by enabling AP BAR receiving.
3. Fix the bug that ESP32 station fails to connect some APs, such as Xiaomi hotspot etc,
after reset.
This commit adds the ability for backtracing to trace from the itnerrupt to the
task stack, and across nested interrupts. Test cases have also been added.
See merge request !4084
Note: "Test backtrace from abort" reset reason modified by removing abort as a reason.
esp32: update libphy.a to fix interrupt watchdog when WiFi and BT run at the same time and both enable modem sleep (backport v3.1)
See merge request idf/esp-idf!4193
Shortcircuit evaluation may cause skip of _mdns_strdup_check of any further question field, which after clear_rx_packet freed undefined memory.
Fixes https://ezredmine.espressif.cn:8765/issues/28465
Originally, when doing BLE active scan, Bluedroid will not report adv to
application layer until receive scan response. This option is used to
disable the behavior. When enable this option, Bluedroid will report
adv data or scan response to application layer immediately.
