Commit graph

76 commits

Author SHA1 Message Date
Angus Gratton
0bc5dcc2c2 cmake: Post-merge fixups 2018-09-06 11:14:30 +08:00
Angus Gratton
b355854d4d Merge branch 'master' into feature/cmake 2018-09-05 10:35:04 +08:00
Roland Dobai
f755a0371d Use check_python_dependencies everywhere as order-only-prerequisite 2018-09-03 11:42:10 +02:00
Angus Gratton
38c0626090 cmake app_update: Add "flash blank otadata" functionality to cmake 2018-08-31 12:30:14 +08:00
Angus Gratton
a9c4ed7139 Merge branch 'master' into feature/cmake 2018-08-30 18:51:01 +08:00
Angus Gratton
7f06543817 cmake/partitions: Apply offset to partition table metadata correctly
Also warn if the parttool.py has an error
2018-08-29 20:22:55 +08:00
Angus Gratton
31ae3fe683 make: Use order-only prereq to check python dependencies 2018-08-23 08:28:57 +02:00
Roland Dobai
62cad3a7d7 Add python-future by using python requirements file 2018-08-23 08:28:57 +02:00
Angus Gratton
ff2404a272 Merge branch 'master' into feature/cmake 2018-08-16 17:14:17 +10:00
Angus Gratton
57b601ab7f secure boot: Pad to avoid data after the signature mapping into the address space
Because address space is mapped in 64KB pages, it was possible for unauthenticated data after the
app .bin to become mapped into the flash cache address space.

This problem is solved by 2 changes:

* "esptool elf2image --secure-pad" will pad the image so that the signature block ends close to the
  64KB boundary. Due to alignment constraints it will be 12 bytes too short after signing (but
  with flash encryption, these 12 bytes are still encrypted as part of the last block and can't be
  arbitrarily changed).
* By default, secure boot now requires all app partitions to be a multiple of 64KB in size.
2018-07-17 15:33:47 +10:00
Angus Gratton
43b6c76bba Merge branch 'feature/expansion_space_for_bootloader' into 'master'
partition_table: Moving to custom offset

See merge request idf/esp-idf!2263
2018-06-18 12:34:53 +08:00
Konstantin Kondrashov
3e0ac4db79 partition_table: Expanding the space under the bootloader
Allows you to move the partition table, it gives more space for the bootloader.
Added a new utility - parttool.py. This utility can search for the offset and/or size of the partitions by name and type/subtype. Use for getting APP_OFFSET and PHY_DATA_OFFSET.
The linker(esp32.bootloader.ld) made changes that allow you to write a custom bootloader code more.

TW14125
2018-06-08 18:47:29 +05:00
Roland Dobai
51e42d8e92 idf_monitor: add support for filtering options 2018-06-05 12:23:27 +02:00
Angus Gratton
cfa8ed15c0 partition table: Set partition table offset via variable 2018-05-29 16:34:45 +10:00
Angus Gratton
2909fc182b esptool: Remove tabs from KConfig.projbuild 2018-05-29 16:34:45 +10:00
Angus Gratton
580cfeaaae idf.py: Print flashing steps at the end of each build 2018-05-29 16:34:45 +10:00
Angus Gratton
2f4079ebb2 cmake: Hide serial port settings in menuconfig when using cmake 2018-05-29 16:34:45 +10:00
Angus Gratton
4a2f1f0354 esptool: Add note that ESPTOOLPY_PORT & ESPTOOLPY_BAUD are ignored when using idf.py 2018-04-30 09:59:20 +10:00
Angus Gratton
f1d3bfc0c7 cmake: Add new flasher_args.json file for IDE parsing, document metadata files better 2018-04-30 09:59:20 +10:00
Angus Gratton
88df8fd293 cmake: Use cmake_lint project, tidy up all CMake source files 2018-04-30 09:59:20 +10:00
Angus Gratton
efb5928934 idf.py build & flash tool
Generate flasher args files & .json project info file as part of cmake build
2018-04-30 09:59:20 +10:00
Angus Gratton
cb99531d15 cmake: Generate PHY init data partition as part of the build 2018-04-30 09:59:20 +10:00
Angus Gratton
674d398c93 cmake: Add partition table, and .bin file targets 2018-04-30 09:59:20 +10:00
Angus Gratton
c671a0c3eb build system: Initial cmake support, work in progress 2018-04-30 09:59:20 +10:00
Angus Gratton
bd306bb519 esptool: Update to v2.3.1 2018-02-28 10:17:14 +11:00
Angus Gratton
6736908eaf esptool: Update to v2.2.1
Fixes a bug with >230400bps flashing on macOS, possibly other platforms.

Full release notes: https://github.com/espressif/esptool/releases/tag/v2.2.1
2018-01-24 17:45:49 +11:00
Angus Gratton
da1bf60904 esptool: Update to v2.2 2018-01-08 11:45:09 +11:00
Deomid Ryabkov
9903ea1c11 Add --warn-undefined-variables to MAKEFLAGS
Fix warnings where undefined vars are used.

Make Kconfig emit "FOO=" for unset bool options
To ensure make variables are always defined, even if empty.

When writing auto.conf, include symbols disabled by dependency to make sure all make variables are always defined.

Fixes espressif/esp-idf#137

Cherry-picked from https://github.com/espressif/esp-idf/pull/138
2017-09-05 16:10:46 +10:00
Angus Gratton
d6c3fb52c8 esptool: Update to v2.1 final release
Replaces v2.1-beta1 release.

Compared to beta, fixes issues with espefuse.py not prompting correctly on Windows (TW11139).
2017-08-22 11:49:07 +10:00
Angus Gratton
17adb40ca8 bootloader: Calculate SHA256 hash of image on every boot
Makes app image booting more reliable (256-bit rather than 8-bit verification.)

Some measurements, time to boot a 655KB app.bin file and run to app_main() execution.

(All for rev 1 silicon, ie no 340ms spurious WDT delay.)

80MHz QIO mode:
before = 300ms
after = 140ms

40MHz DIO mode:
before = 712ms
after = 577ms

40MHz DIO mode, secure boot enabled
before = 1380ms
after = 934ms

(Secure boot involves two ECC signature verifications (partition table, app) that take approx 300ms each with 80MHz CPU.)
2017-07-19 18:31:59 +10:00
Angus Gratton
105c4b7386 Merge branch 'feature/esptool_image_padding' into 'master'
esptool: Optimise app image size by using RAM-loaded data for padding

See merge request !1017
2017-07-19 15:52:22 +08:00
Angus Gratton
d92c541b1a esptool: Optimise generated image size by using RAM-loaded data for padding
Can save almost 128KB from some images.
2017-07-19 16:24:17 +10:00
Angus Gratton
d664e32394 build system: Use component.mk for all components, refactor bootloader build
For config-only components, component.mk should now contain "COMPONENT_CONFIG_ONLY := 1"

Also refactored some of the generation of linker paths, library list. This required cleaning up the way the bootloader
project works, it's now mostly independent from the parent.
2017-07-19 09:10:48 +10:00
Angus Gratton
c26baeb610 esptool: Update to v2.0.1
Fixes issue with GPIO 0 being enabled as an output on ESP32D2WD (or when setting SPI pins in efuse)
and not using Quad-I/O modes.

Ref: https://esp32.com/viewtopic.php?f=2&t=2205
2017-06-26 12:16:09 +10:00
Angus Gratton
6068c1be9a esptool: Update to v2.0 final release
For IDF use, most changes are minor compared to 2.0-beta3.

One notable addition, esptool.py now prints chip model & silicon
revision when it connects.
2017-06-14 15:41:51 +10:00
Angus Gratton
66308774db esptool: Update to include ESP32-D2WD support (and other SPI flash remapping) 2017-04-13 16:25:15 +10:00
Angus Gratton
e477ce93e9 idf_monitor: Small fixes (baud rate, EOL, /dev/tty.X on macOS, Ctrl-T on failure)
* "make monitor" not passed the configured baud rate
  Closes #436 https://github.com/espressif/esp-idf/issues/436
* Pass toolchain prefix from sdkconfig into monitor tool
* Allow setting EOL in idf_monitor.py, use CRLF by default
* Detect if /dev/tty.X is used on macOS, warn and replace with /dev/cu.X
* If a build fails or gdb exits, ignore Ctrl-T (allowing Ctrl-T Ctrl-A/F to be same key sequence everywhere)
* Add a note about winpty on Windows
  Ref 02fdf8271d (commitcomment-21369196)
2017-03-21 16:00:32 +08:00
Angus Gratton
1544544f8a tools: New idf_monitor 'make monitor' tool for smarter monitor output 2017-03-13 09:31:45 +08:00
Angus Gratton
527720fb5b esptool: Update esptool.py to integrate reset fix for older dev boards
Originally marked "Reset with ESP32R0 Windows workaround", but proven to be
necessary on some other platforms as well. This is now integrated into the
default esptool.py reset behaviour.

Closes #305 https://github.com/espressif/esp-idf/issues/305
2017-03-03 15:34:04 +11:00
Angus Gratton
5ea9097dbd esptool: Update to latest v2.0 beta version
* New "espefuse.py set_flash_voltage" command to easily set a fix
  VDD_SDIO regulator voltage (1.8V, 3.3V or disabled).
* Fixes bugs when flashing files with non-4-byte aligned lengths
  (doesn't effect esp-idf image files)
* README improvements
2017-03-03 15:34:04 +11:00
Angus Gratton
68cba2a1fb Bootloader: Support switching to Quad I/O mode during boot process 2017-02-09 08:44:05 +11:00
Angus Gratton
c4b3f6bbbc Update esptool.py to v2.0-beta1
Minor bug fixes, no major functionality changes.
2017-01-10 14:04:54 +11:00
Angus Gratton
03551ec2da build system: Add 'make monitor' target from arduino-esp32
Originally added to arduino-esp32 by @me-no-dev. It's so useful, we
want it in esp-idf as well! :)
2017-01-03 10:59:10 +11:00
Angus Gratton
d245f016ea esptool: Add new options to reset before/after, detect flash size 2016-12-30 14:19:46 +11:00
Angus Gratton
abb7668af7 build system: Fix bug where erase_flash was always invoked for flash
Order-only prerequisites do not work for phony targets!
2016-12-22 16:37:28 +11:00
Ivan Grokhotkov
a760eb3980 Merge branch 'feature/erase_flash' into 'master'
Build system: Add `make erase_flash` target



See merge request !328
2016-12-22 09:53:25 +08:00
Angus Gratton
59e0f63d37 Build system: Add make erase_flash target 2016-12-20 10:00:04 +11:00
Angus Gratton
d6fafd00db Secure boot: Option for app & partition table signing to happen outside build system 2016-12-19 13:12:05 +11:00
Angus Gratton
a9d5e26748 Secure boot: Correctly re-sign if signing key changes, better error if missing 2016-12-01 23:49:12 -08:00
Angus Gratton
506c8cd964 secure boot & flash encryption: Rework configuration options
Add UART bootloader disable options for flash encryption
2016-12-01 23:49:12 -08:00