Commit graph

6533 commits

Author SHA1 Message Date
xiehang
92e4f84ec5 esp_wifi: Fix AP switch to adjacent channel without disconnect 2020-05-15 14:42:03 +08:00
Island
19893abd04 Merge branch 'bugfix/sync_zephyr_bt_mesh_bugfix_v3.3' into 'release/v3.3'
Bugfix/sync zephyr bt mesh bugfix (v3.3)

See merge request espressif/esp-idf!8689
2020-05-13 18:15:22 +08:00
lly
46a8982a80 ble_mesh: A specific fix for compile warning in idf3.3
- Remove the extra #include "bt_common.h" in mesh_timer.c
- Compared with the latest idf, idf3.3 defines BIT(nr) in
  the "soc/soc.h" without the pre-condition "#ifndef BIT",
  which will cause compile warning when using mesh. So we
  include the header file "soc/soc.h" in "mesh_util.h",
  which can bypass the definition of "BIT" in "mesh_util.h"
  when compiling.
2020-05-13 03:40:30 +00:00
lly
8deabb7945 ble_mesh: Fix not update prov addr in fast prov
When using fast provisioning, the Provisioner functionality
will be enabled. Unicast addresses within the pre-allocated
range will be used for provisioning nodes. And during the
address assignment, the allocated unicast address will be
checked that if it's duplicated with other nodes addresses
and the Provisioner's own addresses.
So before starting using fast provisioning, we need to update
the Provisioner address.
2020-05-13 03:40:30 +00:00
lly
f1abf94922 ble_mesh: net_key_status only pull one key idx [Zephyr]
Fixes bug where the config client's net_key_status handler would attempt
to pull two key indexes from a message which only holds one.
2020-05-13 03:40:30 +00:00
lly
f5f9d34443 ble_mesh: Update client message timeout calculation
Since the behavior of sending segmented messages has been
changed properly, the calculation of timeout value which
will be used when sending an acknowledged message by a
client model also needs to be updated.
2020-05-13 03:40:30 +00:00
lly
08a463907e ble_mesh: Add lock for segmented msg operations
Add mutex to protect some variables of the mesh segmented
messages.
Currently the timeout handler of mesh will be executed in
the btc task, while the received mesh messages will be
handled in the btu task. In case some variables are set to
NULL when handled in the btu task, meanwhile these variables
are also accessed in the timeout handler, so we add mutex to
protect these variables and related operations.
2020-05-13 03:40:30 +00:00
lly
367677c3bb ble_mesh: Fix dereferencing pointer before checking for NULL [Zephyr]
The publication context is checked for NULL in bt_mesh_model_publish()
however it was dereferenced before that. Move the assignment to
ctx.send_rel to the same place where other ctx members are set.
2020-05-13 03:40:30 +00:00
lly
b0a6fc7937 ble_mesh: Optimize some mesh log output 2020-05-13 03:40:30 +00:00
lly
30d62cc00f ble_mesh: Fix restore when revoke keys [Zephyr]
Store keys (NetKey and AppKey) again after revoking.
2020-05-13 03:40:30 +00:00
lly
2983f6edb1 ble_mesh: Spit mesh_util.h into different header files
Split mesh_util.h into mesh_byteorder.h, mesh_compiler.h,
mesh_ffs.h and mesh_util.h based on the classification of
Zephyr, which will make further porting more clear.
2020-05-13 03:40:30 +00:00
lly
35c5a7a08c ble_mesh: Split mesh os related into a separate file 2020-05-13 03:40:30 +00:00
lly
0daac93e4e ble_mesh: Split mesh mutex into a separate file 2020-05-13 03:40:30 +00:00
lly
ec34cd8338 ble_mesh: Rename mesh_kernel.* to mesh_timer.* 2020-05-13 03:40:30 +00:00
lly
92cfbe3c6c ble_mesh: Add and use transport macro definitions [Zephyr] 2020-05-13 03:40:30 +00:00
lly
e2186b1d3a ble_mesh: Friend SeqAuth cleanup [Zephyr]
The Friend queue uses the message SeqAuth to determine whether the
message is already in the queue. To facilitate this, the SeqAuth is
passed around as a pointer throughout the transport modules. In the
bt_mesh_ctl_send functions, this parameter is also exposed in the API,
but the internal usage is inconsistent and buggy. Also, no one actually
uses this parameter.

- Removes seq_auth param from bt_mesh_ctl_send, instead passing NULL
  directly to the friend module, to enforce its addition to the queue.
- Makes the seq_auth pointer const throughout the friend module.
2020-05-13 03:40:30 +00:00
lly
489d32663b ble_mesh: Rework msg_cache [Zephyr]
Changes the behavior of the message cache to optimize for cache
capacity. Previously, the message cache's primary function was to avoid
decrypting messages multiple times, although the cache's main function
in the spec is to avoid message rebroadcasting. Optimizing for minimal
decryption causes us to fill the network cache faster, which in turn
causes more cache misses, potentially outweighing the advantage.

Now stores src + seq in message cache instead of field hash value. This
cuts cache size in two, while including more of the sequence number than
before.

Adds messages to the cache only after the packet is successfully
decrypted. This reduces noise in the cache, and ensures that no
invalid deobfuscations are added.

Additionally, this fixes a bug where multiple calls to net_decrypt with
the same packet failed, as the message cache found its own entry from
the previous call.
2020-05-13 03:40:30 +00:00
lly
febe084113 ble_mesh: Segmented TX to groups [Zephyr]
Implements several changes to the transport layer segmented tx to
improve group message performance:
- Moves retransmit counter to tx context instead of per packet. As every
  unacked packet is sent every retransmit, the retransmit counters would
  be the same in each segment. This makes it easier to control progress.
- Delays the scheduling of the retransmit until the completion of the
  last segment by adding a seg_pending counter. This is essentially the
  same as the old behavior, except that the old behavior might retrigger
  the sending before all segments are finished if the advertising is
  slow.
- Allows the group transmits to stop as soon as all retransmits have
  been exhausted, instead of timing out waiting for acks that won't
  come. This allows group tx to finish without error.
- Fixes a bug where a failed TX would block IV update.
- Cancels any pending transmissions of acked segments.
- Reduces log level for several common group tx scenarios that aren't
  erronous.
2020-05-13 03:40:30 +00:00
lly
b6729860dd ble_mesh: Add comment explaining use of byte order [Zephyr]
Add comment that explains why a different byte order is used for the
3-byte opcode on the CID part of the opcode.
2020-05-13 03:40:30 +00:00
lly
9f9acb6c4a ble_mesh: Use 24-bit functions [Zephyr]
Use 24-bit functions for byteorder and net_buf in order to make the
byteorder used more readable.
2020-05-13 03:40:30 +00:00
lly
6d77a8b0c8 ble_mesh: Optimize net_buf_simple routines [Zephyr]
Use sys_put_xyz() helpers instead of memcpy() whenever possible. This
brings in straight-line inline code for pushes and adds of known,
small sizes.
2020-05-13 03:40:30 +00:00
lly
fa06b60568 ble_mesh: Add PRIu64 & PRIx64 in mesh_types.h 2020-05-13 03:40:30 +00:00
lly
bb09078b65 ble_mesh: Add push functions for supported bit-variants [Zephyr]
Add push functions for bit-widths supported by add and pull functions.
2020-05-13 03:40:30 +00:00
lly
0522ce7cf3 ble_mesh: Add support for 64 bit data type [Zephyr]
This enables pulling and pushing values in 64 bit format.
2020-05-13 03:40:30 +00:00
lly
b41d50908b ble_mesh: Add support for 48 bit data type [Zephyr]
This enables pulling and pushing values in 48 bit format.
2020-05-13 03:40:30 +00:00
lly
be57df5e19 ble_mesh: Add 48 bit variants [Zephyr]
This adds sys_*_*48 functions that operation on a 48 bits values.
2020-05-13 03:40:30 +00:00
lly
fd5e18eb49 ble_mesh: Add support for 24 bit data type [Zephyr]
This enables pulling and pushing values in 24 bit format.
2020-05-13 03:40:30 +00:00
lly
4963d4ddf8 ble_mesh: Add 24 bit variants [Zephyr]
This adds sys_*_*24 functions that operation on a 24 bits values.
2020-05-13 03:40:30 +00:00
lly
bc1722260f ble_mesh: Group resends in proxy nodes [Zephyr]
Resend transport segments for groups on the advertiser interface, even
if a connected proxy node holds the group.
2020-05-13 03:40:30 +00:00
lly
968772d18a ble_mesh: Typo in condition in comp_add_elem of cfg_srv [Zephyr]
Vendor model IDs take up four (not two) bytes in the composition
2020-05-13 03:40:30 +00:00
lly
a45406fe6e ble_mesh: GATT Proxy Spec 1.0.1 changes [Zephyr]
Backport of https://github.com/apache/mynewt-nimble/pull/724

Mesh spec 1.0.1 changes proxy disabling behavior to only affect the
relaying from proxy nodes. Previously, disabling proxy would shut down
all proxy and node activity.

Tweaks from the original commit:
- Removed redundant call to bt_mesh_adv_update() in gatt_proxy_set()
- Removed invalid ref to 4.2.11.1 in node_identity_set()

---

According to Mesh Profile Spec 1.0.1, Section 4.2.11:
"If the Proxy feature is disabled, a GATT client device can connect
over GATT to that node for configuration and control. Messages from
the GATT bearer are not relayed to the advertising bearer."

Moreover some notes have been removed from the spec compared to
version 1.0:

Mesh Profile Spec 1.0, Section 4.2.11:

"Upon transition from GATT Proxy state 0x01 to GATT Proxy state 0x00
the GATT Bearer Server shall disconnect all GATT Bearer Clients."

"The Configuration Client should turn off the Proxy state as the last
step in the configuration process."

Mesh Profile Spec 1.0, Section 4.2.11.1:

"When the GATT Proxy state is set to 0x00, the Node Identity state
for all subnets shall be set to 0x00 and shall not be changed."
2020-05-13 03:40:30 +00:00
lly
10f2ed14eb ble_mesh: Support reliable sending when publishing [Zephyr]
Until now the choice of reliable sending (segmented messages with
acks) was implicitly dependent on the size of the payload. Add a new
member to the bt_mesh_model_pub to force using segment acks even when
the payload would fit a single unsegmented message.
2020-05-13 03:40:30 +00:00
lly
cd19f6faf1 ble_mesh: Check device uuid when init provisioning 2020-05-13 03:40:30 +00:00
lly
abcfcc47ec ble_mesh: Fix provisioning buffer initialization [Zephyr]
When PB-GATT support has been enabled the provisioning code "borrows"
the buffer from the proxy code. However, the way that initialization
was happening the proxy buffers were initialized only after
provisioning initialization, resulting in a corrupted buffer with
buf->data pointing to NULL. Reorder the initialization calls so that
proxy is done first and provisioning only after it.
2020-05-13 03:40:30 +00:00
lly
e580f98b44 ble_mesh: Skip publish if update fails [Zephyr]
Allow models to skip a periodic publish interval by returning an error
from the publish update callback.

Previously, an error return from publish update would cancel periodic
publishing. This can't be recovered from, and as such, no valid model
implementation could return an error from this callback, and there was
no way to skip a periodic publish.
2020-05-13 03:40:30 +00:00
lly
50b4bea45c ble_mesh: Enable Segmented Control Messages [Zephyr]
The function bt_mesh_ctl_send() used to support maximum length of
11 bytes. The segmentation complies with the BLE Mesh Standard.
The ack is disabled in case of non unicast address.
2020-05-13 03:40:30 +00:00
lly
4748b07fa2 ble_mesh: Not ignore msg when fast prov is enabled
When fast provisioning is enabled, Provisioner shall not
ignore messages from the nodes whose addresses are not in
the provisioning database. Because other nodes which are
not provisioned by the Primary Provisioner will send node
address messages to the Primary Provisioner.
2020-05-13 10:10:40 +08:00
Michael (XIAO Xufeng)
44d1c90d25 Merge branch 'bugfix/timer_group_intr_enable_v3.3' into 'release/v3.3'
Fix timer group intr enable (backport v3.3)

See merge request espressif/esp-idf!8531
2020-05-08 15:00:16 +08:00
Island
2c1c87b37d Merge branch 'bugfix/ble_mesh_add_missing_cpp_v3.3' into 'release/v3.3'
ble_mesh: Add missing #ifdef __cplusplus (v3.3)

See merge request espressif/esp-idf!8615
2020-05-06 18:16:20 +08:00
Island
4ac84bca8b Merge branch 'bugfix/ble_mesh_compile_error_o2_v3.3' into 'release/v3.3'
ble_mesh: Fix compile error when -O2 (performance) is chosen (v3.3)

See merge request espressif/esp-idf!8618
2020-05-06 18:15:28 +08:00
Island
5a53e67c7e Merge branch 'bugfix/ble_mesh_provisioner_check_key_v3.3' into 'release/v3.3'
ble_mesh: Check if appkey exist before deleting it (v3.3)

See merge request espressif/esp-idf!8619
2020-05-06 18:09:32 +08:00
Island
6ca0c6830b Merge branch 'bugfix/ble_mesh_node_reset_erase_v3.3' into 'release/v3.3'
ble_mesh: Fix node not erase info completely (v3.3)

See merge request espressif/esp-idf!8624
2020-05-06 18:06:36 +08:00
David Čermák
722043f734 Merge branch 'feature/config_mqtt_task_prio_v3.3' into 'release/v3.3'
esp_mqtt: configure task priority, esp_mqtt_abort_connection race condition, clenaup logs and docs (v3.3)

See merge request espressif/esp-idf!8477
2020-05-06 16:18:51 +08:00
lly
745aecb03d ble_mesh: Fix node not erase info completely
Previously only mesh node info is supported to be stored
in flash. So when trying to reset the node, we only need
to judge if the BLE_MESH_VALID flag is set.
Currently we support storing both node & Provisioner info
in flash, when trying to erase the node info from flash,
the BLE_MESH_NODE flag will be checked. So we need to set
bt_mesh.flags to 0 when all the erase operations are done.
2020-05-06 11:45:02 +08:00
lly
e36d1d2f8a ble_mesh: Check if appkey exist before deleting it 2020-05-06 11:37:03 +08:00
lly
1432daf4c6 ble_mesh: Add length check for some mesh operations 2020-05-06 11:33:41 +08:00
lly
6e7d43dd89 ble_mesh: Fix compile error when -O2 (performance) is chosen 2020-05-06 11:33:08 +08:00
lly
3b9e0657d8 ble_mesh: Add missing #ifdef __cplusplus 2020-05-06 11:19:05 +08:00
Mahavir Jain
511dc5516d Merge branch 'bugfix/wifi_prov_not_stopping_v3.3' into 'release/v3.3'
wifi_provisioning: Catch the Wi-Fi events even after Connection errors (v3.3)

See merge request espressif/esp-idf!8609
2020-05-06 11:18:27 +08:00
Island
53a0b3f951 Merge branch 'feat/ble_mesh_ble_adv_simultaneously_v3.3' into 'release/v3.3'
ble_mesh: Support BLE advertising simultaneously (v3.3)

See merge request espressif/esp-idf!8486
2020-05-06 11:14:52 +08:00