Commit graph

10768 commits

Author SHA1 Message Date
lly
b47111c708 ble_mesh: Not ignore msg when fast prov is enabled
When fast provisioning is enabled, Provisioner shall not
ignore messages from the nodes whose addresses are not in
the provisioning database. Because other nodes which are
not provisioned by the Primary Provisioner will send node
address messages to the Primary Provisioner.
2020-05-13 10:09:50 +08:00
Jiang Jiang Jian
6a6de506b1 Merge branch 'bugfix/supplicant_general_fixes_40' into 'release/v4.0'
wpa_supplicant: Fix some memleaks and invalid memory access (backport v4.0)

See merge request espressif/esp-idf!8553
2020-05-12 20:17:51 +08:00
Jiang Jiang Jian
12a65aaac1 Merge branch 'bugfix/wep40_key_parsing_bug_v4.0' into 'release/v4.0'
wpa_supplicant: Add parsing support for WEP40 key(backport)

See merge request espressif/esp-idf!8684
2020-05-12 20:17:15 +08:00
Jiang Jiang Jian
6bfad8a47d Merge branch 'fixbug/tcp_kill_state_assert_for_v4.0' into 'release/v4.0'
lw-ip:fixbug for tcp kill state assert(backport 4.0)

See merge request espressif/esp-idf!8451
2020-05-12 20:15:45 +08:00
xiehang
0863de4a69 esp_wifi: Fix AP switch to adjacent channel without disconnect 2020-05-12 17:20:48 +08:00
Shubham Kulkarni
db3a1110ec pthread: Use INTERFACE in target_link_libraries for vPortCleanUpTCB wrapper 2020-05-12 10:35:47 +05:30
kapil.gupta
398dc28a4e wpa_supplicant: Add parsing support for WEP40 key
WEP key is passed as ascii key without "", add parsing support
in supplicant for this.
2020-05-11 11:23:10 +05:30
Renz Bagaporo
4011393920 ldgen: determinism in mapping rule order
This MR imposes some determinism in the mapping rule order in the output
file. For each section, the archives are arranged alphabetically
(ascending), and the mapping rules in each archive are arranged by
increasing specificity then alphabetically (ascending). The default
rules remain the very first rule for each section.
2020-05-08 21:10:19 +08:00
Zhang Jun Hao
a87df25d9e fix(wpa_supplicant): fix memleak in wpa3 feature 2020-05-08 16:25:38 +08:00
lly
814108f9ac ble_mesh: Add length check for some mesh operations 2020-05-07 09:18:15 +00:00
lly
baf0fb3576 ble_mesh: Fix compile error when -O2 (performance) is chosen 2020-05-07 09:18:15 +00:00
lly
a895bb157f ble_mesh: Fix node not erase info completely
Previously only mesh node info is supported to be stored
in flash. So when trying to reset the node, we only need
to judge if the BLE_MESH_VALID flag is set.
Currently we support storing both node & Provisioner info
in flash, when trying to erase the node info from flash,
the BLE_MESH_NODE flag will be checked. So we need to set
bt_mesh.flags to 0 when all the erase operations are done.
2020-05-07 09:16:51 +00:00
Angus Gratton
b0f053d82d Merge branch 'bugfix/get_started_export_profile_v4.0' into 'release/v4.0'
docs: remove suggestion about running export.sh from .profile script (backport v4.0)

See merge request espressif/esp-idf!8614
2020-05-07 12:07:05 +08:00
kapil.gupta
4242519894 wpa_supplicant: Fix some memleaks and invalid memory access
Add changes to fix issues reported in clang analyzer
2020-05-06 11:06:51 +00:00
morris
b3c3b4e7f0 ethernet: not using latch register to check link 2020-05-06 17:28:18 +08:00
morris
f09c9b957c timer_group: fix intr_enable
timer group interrupt enable is controled by level_int_ena instead of int_ena

Closes https://github.com/espressif/esp-idf/issues/5103
2020-05-06 17:28:18 +08:00
dowster
24c9f56d45 Fix typo with sigmadelta.h #ifdef 2020-05-06 17:28:18 +08:00
Angus Gratton
08bcb587ec Merge branch 'fix/ci_example_test_prov_v4.0' into 'release/v4.0'
CI: Fix prov example test exception handle (v4.0)

See merge request espressif/esp-idf!8440
2020-05-06 16:59:20 +08:00
Jiang Jiang Jian
c5a8dc85b7 Merge branch 'feature/wpa3_pmf_pmk_caching_backport_v4.0' into 'release/v4.0'
WPA3, PMF & PMK caching support (backport v4.0)

See merge request espressif/esp-idf!8625
2020-05-06 15:41:05 +08:00
Shivani Tipnis
a7ca14b064 CI: Fix prov example test cryptography package version exception handling 2020-05-06 04:54:59 +00:00
Nachiket Kukade
4557c686b8 wpa_supplicant: Fix EAP Re-authentication issue
EAP reauth frames are dropped at various stages due to current
implementation of WPA2 ENT states and EAP SM init/deinit logic.
Route EAPOL frames based on EAP pkt type and maintain EAP SM
to facilitate EAP re-authentication process.
2020-05-06 10:21:45 +05:30
Nachiket Kukade
5e33a351f1 esp_wifi: Enable WPA3 & PMF by default 2020-05-06 10:21:41 +05:30
Nachiket Kukade
1fc54cfad8 Increase example cmake parallel jobs number 2020-05-06 10:21:29 +05:30
Nachiket Kukade
bc7a34b494 wpa_supplicant: Disable TLSv1.2 by default
Some Enterprise Authentication Servers do not support TLS v1.2.
Move this option to Menuconfig and disable by default.
2020-05-06 10:21:25 +05:30
Nachiket Kukade
ab81940982 esp_wifi: Additional changes for WPA3 & PMF testcases
Added WPA3 Testcases support for -
1. Anti-Clogging Token Request support
2. Return correct status from SAE modules for invalid scenarios
3. Add PMK Caching support for WPA3

wifi lib includes fixes for below PMF Certification issues -
1. Check return status of decrypt operation. Fixes 5.3.3.1.
2. Allow PMF negotiation for WPA2-Enterprise. Fixes 5.3.3.2, 5.3.3.4.
3. Add NULL check on key before encrypting PMF, fixes crash.
2020-05-06 10:20:46 +05:30
Sagar Bijwe
6d6b7b09e8 wifi: Add PMF and WPA3 documentation 2020-05-06 10:20:40 +05:30
Nachiket Kukade
d36663b798 wpa_supplicant: Support WPA3 4-way handshake, add config option
1. Add changes in 4-way handshake path to allow SAE key mgmt.
2. Support for configuring WAP3 at init time, added Kconfig option.
3. Handle and propagate error conditions properly.
2020-05-06 10:20:35 +05:30
Nachiket Kukade
6b76228fcb wpa_supplicant: Add SAE handshake support for WPA3-PSK
Under WPA3-Personal, SAE authentication is used to derive PMK
which is more secure and immune to offline dictionary attacks.
1. Add modules to generate SAE commit/confirm for the handshake
2. Add modules that build and parse SAE data in Auth frames
3. Add WPA3 association and key mgmt definitions
4. Invert y-bit while solving for ECC co-ordinate -
     Once an X co-ordinate is obtained, solving for Y co-ordinate
     using an elliptical curve equation results in 2 possible values,
     Y and (P - Y), where p is the prime number. The co-ordinates are
     used for deriving keys in SAE handshake. As par the 802.11 spec
     if LSB of X is same as LSB of Y then Y is chosen, (P - Y) otherwise.
     This is not what is implemented, so fix this behavior to obtain the
     correct Y co-ordinate.
2020-05-06 10:20:26 +05:30
Sagar Bijwe
8f5f828ad6 wpa_supplicant: Adding SAE modules with testcase
This change ports SAE(Simultaneous Authentication of Equals)
feature from wpa_supplicant and makes it work with mbedtls
crypto APIs. Currently only group 19 is supported. A sample
SAE handshake is included in the testcase. Other minor
changes for DH groups are also included.
2020-05-06 10:20:22 +05:30
Nachiket Kukade
5c5ae96be2 Add encryption/decryption support for PMF
1. Add CCMP, AES crypto modules for unicast protected Mgmt frames
2. Add support for computing SHA256 MIC on Bcast Mgmt frames
3. Add support for storing iGTK during 4-way handshake.
4. Provide APIs to MLME for utilizing the SW crypto modules
2020-05-06 10:20:16 +05:30
Nachiket Kukade
1b7f3fee5c Add support for PMF configuration and negotiation
1. Add APIs for configuring PMF through set config.
2. Map Supplicant and Wifi Cipher types.
3. Add support for PMF negotiation while generating RSN IE.
2020-05-06 10:20:11 +05:30
Hrudaynath Dhabe
b7dc47108f wifi: Add code required to backport PMK Caching 2020-05-06 10:19:52 +05:30
liu zhifu
8cd210b38b esp_wifi/supplicant: fix some WiFi stop memory leak 2020-05-06 10:15:51 +05:30
Hrudaynath Dhabe
19e840aa53 wpa_supplicant: Set assoc_ie_len based on generated RSN/WPA IE 2020-05-06 10:15:46 +05:30
Hrudaynath Dhabe
39acf9c4dd wifi: Add PMK caching feature for station WPA2-enterprise
4. Pmksa cache expiry after dot11RSNAConfigPMKLifetime timeout.
2020-05-06 10:15:43 +05:30
Sagar Bijwe
2da4ffa2aa wifi: Add PMK caching feature for station WPA2-enterprise
1) Added PMK caching module from wpa_supplicant.
2) Modified wpa_sm to
    a) Add entry to PMK cache when first time associated to an AP.
    b) Maintain entry across the associations.
    c) Clear current PMKSA when deauth happens.
    d) Search for an entry when re-associating to the same AP and
       set it as current PMKSA
    e) Wait for msg 1/4 from AP instead of starting EAP authentication.
    f) Check PMKID in msg 1 with current PMKSA/cache.
    g) Use the cached PMK to complete 4-way handshake.
3) Remove config_bss callback as it was redundant and used to cause
   problems for PMK caching flow.

Closes IDF-969
2020-05-06 10:15:36 +05:30
lly
30c645d9c2 ble_mesh: Check if appkey exist before deleting it 2020-05-06 11:39:02 +08:00
Jiang Jiang Jian
b9fa6b0b1a Merge branch 'bugfix/can_not_get_IP_address_from_China_mobile_v4.0' into 'release/v4.0'
wifi: fix the bug that ESP32 can't get IP address from China Mobile router (v4.0)

See merge request espressif/esp-idf!8401
2020-05-06 11:16:24 +08:00
Island
5f71ec3640 Merge branch 'bugfix/ble_mesh_rpl_list_size_v4.0' into 'release/v4.0'
ble_mesh: Associate replay protection list size with nodes count (v4.0)

See merge request espressif/esp-idf!8495
2020-05-06 11:14:21 +08:00
Island
a44f473d4a Merge branch 'doc/ble_mesh_fixes_v4.0' into 'release/v4.0'
doc: Fix some ble mesh description (v4.0)

See merge request espressif/esp-idf!8503
2020-05-06 11:12:57 +08:00
Island
beb64a1af4 Merge branch 'bugfix/ble_mesh_add_missing_cpp_v4.0' into 'release/v4.0'
ble_mesh: Add missing #ifdef __cplusplus (v4.0)

See merge request espressif/esp-idf!8506
2020-05-06 11:12:25 +08:00
Island
7b8356ee2f Merge branch 'bugfix/ble_mesh_time_scene_wrong_name_v4.0' into 'release/v4.0'
ble_mesh: Fix time scene wrong macro name (v4.0)

See merge request espressif/esp-idf!8511
2020-05-06 11:11:00 +08:00
Ivan Grokhotkov
7fbfb1aa03 docs: remove suggestion about running export.sh from .profile script
This was quite obviously a bad suggestion, and it seems that some
users have actually read the docs attentively enough to have followed
it. Replace be recommendation to create an alias.

Closes https://github.com/espressif/esp-idf/issues/3889
2020-05-05 21:39:30 +02:00
Roland Dobai
7f4b651434 tools: Make Unicode from subprocess result in the CMake convert script
Fixes an issue with Python 3 in MSYS where it fails while trying to join
paths where one part is Unicode (default string on Python3) and the
second part are bytes (returned by the subprocess call).

Closes https://github.com/espressif/esp-idf/issues/5189
2020-04-28 15:22:27 +02:00
lly
b97d4c617b ble_mesh: Fix time scene wrong macro name 2020-04-27 16:26:23 +08:00
lly
765bd76ba3 ble_mesh: Add missing #ifdef __cplusplus 2020-04-27 15:34:14 +08:00
lly
9370264cac doc: Fix some ble mesh description 2020-04-27 15:25:46 +08:00
Angus Gratton
07c1d9d9c7 doc: Add warnings about using JTAG debugging with hardware security features
This is related to the following issues but is not a fix, just documentation of a workaround until we can
improve the support:
https://github.com/espressif/esp-idf/issues/4878
https://github.com/espressif/esp-idf/issues/4734
2020-04-27 16:41:16 +10:00
lly
8bfa01cc28 ble_mesh: Fix client local parameters not initialized 2020-04-27 14:39:40 +08:00
lly
90a9444696 ble_mesh: Continue node info restore even if failure happens
During BLE Mesh Provisioner initialization, the stack will restore
the nodes information if settings storage is enabled.
Previously when a failure happens (e.g. found the same uuid) during
the restore procedure, the information of the following nodes will
not be restored and error will be directly returned.
But this will introduce some problem with user experience, because
some newly provisioned nodes information will not be restored and
Provisioner will not be able to control those nodes.
So we change the operation here, when a failure happens during the
restore procedure, Provisioner will only ignore the information of
the current node and continue restoring other nodes information.
2020-04-27 14:39:40 +08:00