Commit graph

2491 commits

Author SHA1 Message Date
Liu Han
aeecbcc7ee fix(lwip): fix tcp connect fail when enable LOOPIF 2017-04-27 18:59:47 +08:00
Jeroen Domburg
46fa2cfb46 Merge branch 'feature/spi_slave' into 'master'
Split common SPI stuff out of master driver; add slave driver; add workaround for DMA issue.

This merge req mainly adds a slave device. In order to do this, the original master driver is refactored into common code shared by master and slave modes, and a slave driver is added.

The other things added are:
- Added a workaround for a 'feature' of the ESP32 silicon that can lock up the receive DMA channel in some situations. This can only be fixed by resetting *both* DMA channels. The workaround implemented makes sure that the reset only happens when both channels are idle
- Got rid of the automatic choice between register- and DMA-based transfers. The master (and slave) code will now always go for a DMA transfer if a DMA channel is given, and always go for register-based transfers if no DMA channel is given.
- Add in a bunch of fixes for outstanding Github issues.

See merge request !659
2017-04-27 12:28:42 +08:00
Jeroen Domburg
04b901e629 SPI: More MR issues fixed, style fixup 2017-04-27 11:49:04 +08:00
Jeroen Domburg
bf0c32364a SPI: Also check SPI_TRANS_USE_[T|R]XDATA when decifding to turn on MOSI/MISO. Fixes https://github.com/espressif/esp-idf/issues/488 2017-04-27 11:49:04 +08:00
Jeroen Domburg
881a90b8ab SPI: SPI master clock calculation: n has a minimum of 2 to allow for both a low and a high cycle. Fixes https://github.com/espressif/esp-idf/issues/491 2017-04-27 11:49:04 +08:00
Jeroen Domburg
cecb846450 SPI: Fix comment for 3wire, make GPIO pins GPIO_MODE_INPUT_OUTOUT. Fixes https://github.com/espressif/esp-idf/issues/533 2017-04-27 11:49:04 +08:00
Jeroen Domburg
4c06dca15c SPI: Small fixes according to MR comments 2017-04-27 11:49:04 +08:00
Jeroen Domburg
e9c372bc2d SPI: Split common SPI stuff out of master driver; add slave driver; add workaround for DMA issue. 2017-04-27 11:49:04 +08:00
Ivan Grokhotkov
1324e565fa Merge branch 'bugfix/esp32_core_dump_sanity_checks' into 'master'
esp32: Core dump sanity checks

Adds sanity checks when doing core dump to flash

- CRC for core dump flash partition config
- Tasks with corrupted TCBs are skipped
- Assertions to check that nothing is written beyond core dump flash partition

Ref TW11879

See merge request !686
2017-04-27 10:43:58 +08:00
Ivan Grokhotkov
fe695a9af8 Merge branch 'feature/cpu_restart_sequence' into 'master'
Restart sequence requires set up for app cpu.

These changes required to make correct restart of CPU form JTAG.

See merge request !703
2017-04-27 09:30:42 +08:00
Alexey Gerenkov
98895af68b esp32: Core dump sanity checks were added
- CRC for core dump flash partition config
 - Tasks with corrupted TCBs are skipped
 - Assertions to check that nothing is written beyond core dump flash partition
2017-04-26 21:13:02 +03:00
Dmitry Yakovlev
baeab37560 Debug info removed. 2017-04-26 10:31:05 +03:00
Ivan Grokhotkov
0fe765a977 Merge branch 'feature/32k_xtal' into 'master'
add support for 32k XTAL as RTC_SLOW_CLK source

- RTC_CNTL_SLOWCLK_FREQ define is removed; rtc_clk_slow_freq_get_hz
  function can be used instead to get an approximate RTC_SLOW_CLK
  frequency

- Clock calibration is performed at startup. The value is saved and used
  for timekeeping and when entering deep sleep.

- When using the 32k XTAL, startup code will wait for the oscillator to
  start up. This can be possibly optimized by starting a separate task
  to wait for oscillator startup, and performing clock switch in that
  task.

- Fix a bug that 32k XTAL would be disabled in rtc_clk_init.

- Fix a rounding error in rtc_clk_cal, which caused systematic frequency
  error.

- Fix an overflow bug which caused rtc_clk_cal to timeout early if the
  slow_clk_cycles argument would exceed certain value

- Improve 32k XTAL oscillator startup time by introducing bootstrapping
  code, which uses internal pullup/pulldown resistors on 32K_N/32K_P
  pins to set better initial conditions for the oscillator.

Ref TW11683.

Ref https://esp32.com/viewtopic.php?f=13&t=1570

Fixes https://github.com/espressif/esp-idf/issues/337.

See merge request !696
2017-04-26 14:01:59 +08:00
Dmitry Yakovlev
00aa73c6cf Restart sequence requires set up for app cpu. 2017-04-26 07:47:37 +03:00
Ivan Grokhotkov
6353bc40d7 Add support for 32k XTAL as RTC_SLOW_CLK source
- RTC_CNTL_SLOWCLK_FREQ define is removed; rtc_clk_slow_freq_get_hz
  function can be used instead to get an approximate RTC_SLOW_CLK
  frequency

- Clock calibration is performed at startup. The value is saved and used
  for timekeeping and when entering deep sleep.

- When using the 32k XTAL, startup code will wait for the oscillator to
  start up. This can be possibly optimized by starting a separate task
  to wait for oscillator startup, and performing clock switch in that
  task.

- Fix a bug that 32k XTAL would be disabled in rtc_clk_init.

- Fix a rounding error in rtc_clk_cal, which caused systematic frequency
  error.

- Fix an overflow bug which caused rtc_clk_cal to timeout early if the
  slow_clk_cycles argument would exceed certain value

- Improve 32k XTAL oscillator startup time by introducing bootstrapping
  code, which uses internal pullup/pulldown resistors on 32K_N/32K_P
  pins to set better initial conditions for the oscillator.
2017-04-26 12:43:22 +08:00
Angus Gratton
32fc0a62b9 Merge branch 'bugfix/secure_boot_enable_image_verify' into 'master'
Fix secure boot enable - can verify bootloader image

Secure boot enable would fail because esp_image_basic_verify() would fail to verify the bootloader image.

* Failure prevented secure boot from enabling.
* Also adds unit test cases for esp_image_basic_verify()

Ref https://esp32.com/viewtopic.php?f=2&t=1602
TW11878

See merge request !693
2017-04-26 10:58:55 +08:00
Angus Gratton
08cfcbb6ea bootloader: Add some debug logging around OTA selection 2017-04-26 11:23:35 +10:00
Angus Gratton
e2479b46f7 secure boot: Fix bootloader image verification failure
* Failure prevented secure boot from enabling.
* Also adds unit test cases for esp_image_basic_verify()

Ref https://esp32.com/viewtopic.php?f=2&t=1602
TW11878
2017-04-26 11:23:35 +10:00
Ivan Grokhotkov
b540322dc1 Merge branch 'feature/wear_levelling' into 'master'
wear levelling

This MR adds wear levelling component. It presents an interface similar to the interface of spi_flash and esp_partition. Inside, it stores data inside a partition to in a way that reduces worst case number of erase cycles for any given sector.

Also included are APIs similar to the ones provided for SDMMC to mount FAT filesystem on top of the wear levelling partition. A simple example shows how this API can be used.

Ref TW10338.

See merge request !567
2017-04-25 19:46:11 +08:00
Ivan Grokhotkov
16cdd86579 Merge branch 'bugfix/lwip_makefile_ppp' into 'master'
lwip: fix error when building on OS X, only build ppp if enabled

- reorder directories listed in COMPONENT_SRCDIRS so that
  subdirectories precede parent directories

- don’t include PPP source directories if PPP support is not enabled

See merge request !700
2017-04-25 18:30:29 +08:00
Ivan Grokhotkov
8d6a03820a lwip: fix error when building on OS X, only build ppp if enabled
- reorder directories listed in COMPONENT_SRCDIRS so that
  subdirectories precede parent directories

- don’t include PPP source directories if PPP support is not enabled
2017-04-25 17:22:09 +08:00
Ivan Grokhotkov
8131c77860 Merge branch 'feature/xtal_freq_autodetect' into 'master'
XTAL frequency detection, support for selecting XTAL frequency

This MR adds more robust XTAL frequency detection code (which gets run in the bootloader) and an option to set XTAL frequency in Kconfig. By default we still use autodetection, since it is more reliable than the one used in ROM code.

This will help with issues about XTAL frequency detection in high ambient temperature conditions.

Ref TW12008

See merge request !694
2017-04-25 16:30:36 +08:00
Ivan Grokhotkov
fdfa7e6cc2 Merge branch 'bugfix/sdmmc_timeout' into 'master'
sdmmc: handle card removal when CD is not used

When SD card is removed during transaction, SDMMC peripheral can report
a range of errors, such as timeouts, CRC errors, start/end bit errors.
Under normal conditions (card is inserted), SDMMC peripheral also generates
command done or data done interrupts. When the card is removed, such
interrupts may not be always generated.

This change fixes handling of timeout interrupts and SBE interrupts.
It also adds a one second timeout into the event processing loop. This
timeout allows applications to recover in cases when the SDMMC peripheral
doesn’t generate command/data done event on card removal.

Fixes TW11592.

See merge request !678
2017-04-25 16:27:12 +08:00
Jiang Jiang Jian
3f4e917ad6 Merge branch 'feature/ppp_over_serial' into 'master'
Enable experimental/unsupported PPP over Serial driver

From PR #272 https://github.com/espressif/esp-idf/pull/272

See merge request !690
2017-04-25 14:02:55 +08:00
Jiang Jiang Jian
937940c989 Merge branch 'bugfix/fatfs_sdmmc_cleanup' into 'master'
fat/sdmmc: unmount FATFS object on error

Failure to call f_mount(NULL,...) makes FATFS attempt to clean up the old
FS object upon next mount. If previous mount operation has failed, some
parts of FS object may not be fully initialized, which will cause errors
(such as attempting to delete a mutex which wasn’t allocated).

Fixes TW11594.

See merge request !679
2017-04-25 13:48:34 +08:00
Jiang Jiang Jian
775a1fbc6d Merge branch 'bugfix/remove_unneeded_header_file_including' into 'master'
remove unneeded header file including



See merge request !695
2017-04-25 13:23:03 +08:00
Jiang Jiang Jian
90c8bd93e0 Merge branch 'feature/ethernet_lan8720' into 'master'
ethernet: Add LAN8720 phy support, move PHY to components

Encompasses PR #383 https://github.com/espressif/esp-idf/pull/383

Also includes changes to move PHY support functions into ethernet component, similar to #398 https://github.com/espressif/esp-idf/pull/398/files.





See merge request !540
2017-04-24 17:03:37 +08:00
XiaXiaotian
0c358c37f5 remove unneeded header file including 2017-04-24 16:11:26 +08:00
Ivan Grokhotkov
6b237de909 Add XTAL frequency selection to Kconfig
This change allows XTAL frequency to be selected using menuconfig
2017-04-24 15:55:02 +08:00
Ivan Grokhotkov
3323f31cfb soc: implement XTAL frequency detection
ROM code already implements XTAL frequency detection, but it uses the 8M
clock before the clock tuning parameters are initialized. With the
zero clock tuning parameter, 8M clock has significant frequency deviation
at high temperatures, which can lead to erroneous detection of 40 MHz
crystal as a 26 MHz one.

This change adds XTAL frequency detection code to rtc_clk_init routine,
and detection is performed after the 8M clock tuning parameter as been
initialized.
2017-04-24 15:29:30 +08:00
Jiang Jiang Jian
36ed7f507e Merge branch 'bugfix/gattc_example_strcmp' into 'master'
Fix device_name check in gatt_client example

`strcmp` was used against `adv_name` array, which was not a zero terminated string, causing `strcmp` check to fail for valid names.

Ref. https://github.com/espressif/esp-idf/pull/502

See merge request !652
2017-04-24 13:11:41 +08:00
Jiang Jiang Jian
99e461c676 Merge branch 'bugfix/tw7105_tcp_stable_test_abort_issue' into 'master'
lwip: fix tcp stable test abort issue

This MR covers following changes:
1. Modify dhcp server timer to 1 seconds
2. Enable ETHARP_TRUST_IP_MAC. Consider following scenario: we are in throughput test or traffic stability test, if this option is disabled, then every 5 minutes, the IP/MAC entry in arch cache is aged out, however, the traffic continuously send to lwip from application, because there is no IP/MAC entry in ARP cache, then the packets have to be buffered in ARP queue and a ARP request is triggered, but the ARP queue can only holds 3 packets, the later packets will be dropped, then if the traffic is big, a lot of packets will be dropped here before we get the right ARP response. For TCP, this will trigger re-transmit, it's intolerable for some application, such as real time audio, if re-transmit happen, then performance of voice will be impact. For UDP, sometimes it may also cause problem, such as DHCP, if here we failed to send the DHCP here, we has to wait the DHCP timeout etc... so this option is enabled here by default.

See merge request !681
2017-04-24 13:10:21 +08:00
Jiang Jiang Jian
767e38f462 Merge branch 'example/perf_tcp_udp_revision' into 'master'
tcp_udp_perf: add license and modify some details

tcp_udp_perf: add license and modify some details

See merge request !666
2017-04-24 13:07:32 +08:00
Jiang Jiang Jian
733e404fcf Merge branch 'feature/optimize_text_rodata_in_iram_dram' into 'master'
optimize WiFi text rodata in iram dram

1. optimize text and rodata in wifi lib

2. update smartconfig

See merge request !668
2017-04-24 13:03:07 +08:00
Jiang Jiang Jian
29002a1c83 Merge branch 'feature/add_limit_for_all_dynamic_ebuf' into 'master'
esp32: update wifi lib for limitting dynamic wifi buffer

Add limit for all dynamic wifi ebuf to avoid wifi run out of memory in some extreme scanrio. 
The default max allocated dynamic tx buffer is 32
The default max allocated dynamic rx buffer is 64, make default value is bigger because when all packets we received are small packets, e.g. the length is 64Bytes, then 64K can hold 1000 packets, so 64 maybe a good candidate default value, anyway the customer can configure it via menuconfig.
The default dynamic wifi internal long/long-long mgmt is 32, generally 32 is enough for mgmt packet (beacon/auth/assoc/probe/null etc). Generally when all the 32 mgmt buffer is run out of memory, it means internal wifi state machine may has problem, we need to debug it.

See merge request !683
2017-04-24 11:49:50 +08:00
Jiang Jiang Jian
97142bb8db Merge branch 'feature/support_read_mac_addr_from_customer_efuse' into 'master'
Add customer MAC address that read from efuse



See merge request !673
2017-04-24 11:30:55 +08:00
XiaXiaotian
9d8425bd72 put RODATA of libphy.a into DRAM
There are some RODATAs of libphy.a that are called in ISR. So need
    to put them into DRAM to avoid access them when R/W SPI flash. Due
    to the RODATAs which are called in ISR haven't been picked out to
    put into DRAM, put all of the RODATA of libphy.a into DRAM. This
    will be optimized in the future.
2017-04-24 11:22:49 +08:00
Ivan Grokhotkov
af6f3bffab Merge branch 'feature/esp32_wdt_rst_info' into 'master'
esp32: Added dumping debug info from traceport upon reset by any WDT

Adds ability to dump debug info (PC and internal processor state) from traceport upon reset by any WDT.

See merge request !654
2017-04-24 10:32:16 +08:00
Alexey Gerenkov
77a92e6dcc esp32: Added dumping info from traceport upon reset by any WDT
- Last PC info and waiti mode indication are printed for both CPUs
 - Raw traceport regs values are printed only for log levels higher than DEBUG
2017-04-23 22:07:56 +03:00
Ivan Grokhotkov
404e89da4d Merge branch 'bugfix/rtc_reg_fields' into 'master'
soc: allow REG_SET_FIELD to be used for bit fields

- Fixes an issue with `rtc_clk_apll_enable`: https://esp32.com/viewtopic.php?f=13&t=1673
- Fixes `rtc_clk_fast_freq_set` function always selecting XTAL/4 as fast clock source.
- Fixes regression in deep sleep current (7uA instead of 5uA).

See merge request !674
2017-04-21 19:40:45 +08:00
Ivan Grokhotkov
8399ed900a Merge branch 'bugfix/xtal_freq_after_wdt_reset' into 'master'
rtc_clk_init: handle case when XTAL frequency has already been set

On first reset, ROM code writes the estimated XTAL frequency into
RTC_APB_FREQ_REG (aka STORE5). If the application doesn’t specify exact
XTAL frequency (which is always the case for now), rtc_clk_init will
guess what kind of XTAL is used (26M or 40M), based on the estimated
frequency. Later, detected frequency is written into RTC_XTAL_FREQ_REG
(aka STORE4).

When the application switches clock source to PLL, APB frequency changes
and RTC_APB_FREQ_REG is updated. If the application encounters an RTC
WDT reset, RTC_APB_FREQ_REG will not be updated prior to reset. Once the
application starts up again, it will attempt to auto-detect XTAL
frequency based on RTC_APB_FREQ_REG, which now has value of 80000000.
This will fail, and rtc_clk_xtal_freq_estimate will fall back to the
default value of 26 MHz. Due to an incorrect XTAL frequency, PLL
initialization will also take incorrect path, and PLL will run at a
different frequency. Depending on the application this may cause just
garbage output on UART or a crash (if WiFi is used).

This change checks if RTC_XTAL_FREQ_REG has already been set before trying
to estimate XTAL frequency based on the value of RTC_APB_FREQ_REG, and
uses RTC_XTAL_FREQ_REG value if it is valid.

Fixes TW11738.

See merge request !691
2017-04-21 19:38:46 +08:00
XiaXiaotian
b238bc691d Do not put the whole object files into IRAM. Add attributes to the functions called in ISR instead. 2017-04-21 15:38:01 +08:00
XiaXiaotian
5553fbd537 add base MAC address storage choice.
Base MAC address can be stored in default manufacture-defined or customer
    pre-defined place in EFUSE and other place e.g. flash or EEPROM.
    If choose to use base MAC address which is stored in other place, please
    call esp_base_mac_addr_set_external() before initializing WiFi/BT/Ehternet.
2017-04-21 14:55:11 +08:00
Angus Gratton
fa3120cb40 PPPoS example: Move pin configuration to menuconfig, add log statement
Also remove spurious infinite loop in app_main()
2017-04-21 14:29:16 +10:00
Angus Gratton
fd3ef4cdfe Merge branch 'bugfix/github_fixes' into 'master'
Various fixes from Github

Some one-line fixes from Github PRs.

See merge request !689
2017-04-21 12:27:32 +08:00
Angus Gratton
94a61389ff Merge branch 'bugfix/driver_const_params' into 'master'
components/driver: 'const' all config calls.

Merges PR #519 https://github.com/espressif/esp-idf/pull/519

See merge request !687
2017-04-21 12:25:15 +08:00
Angus Gratton
2c17b16328 Merge branch 'bugfix/mbedtls_wrong_errno' into 'master'
mbedtls port: Fix detection of EWOULDBLOCK/EAGAIN with non-blocking sockets

Since mbedtls_net_errno is reset by fcntl, it is reset after calling
net_would_block, so the call to mbedtls_net_errno in mbedtls_net_recv
and mbedtls_net_send will always get back 0. This change propagates
the value returned by mbedtls_net_errno up through net_would_block,
to allow the correct error value to be used and avoid a redundant
call to mbedtls_net_errno.

Merges PR #511 https://github.com/espressif/esp-idf/pull/511

See merge request !688
2017-04-21 12:24:59 +08:00
Angus Gratton
f3a567b65d PPPoS: Rearrange config items (move TCP/IP stack size to LWIP), mark as experimental/unsupported
Ref #272
2017-04-21 14:23:34 +10:00
Adrian Muzyka
47c722d674 Enable lwip PPPoS support
* Fix some lwip api bugs
 * Added PPP_SUPPORT parameter to lwip Kconfig
 * Added example pppos_client

Merges #272 https://github.com/espressif/esp-idf/pull/272
2017-04-21 14:23:34 +10:00
Liu Zhi Fu
561a1a64f2 esp32: update wifi lib for limitting dynamic wifi buffer
Add limit for all dynamic wifi ebuf to avoid wifi run out of memory in some extreme scanrio
2017-04-21 10:38:00 +08:00