Commit graph

105 commits

Author SHA1 Message Date
Ivan Grokhotkov
141b1174c6 idf_monitor: send CR when ENTER is pressed
Other terminal emulators (screen, minicom) default to sending CR when
ENTER is pressed on the keyboard. Make behavior of idf_monitor
consistent with them.
2017-08-21 15:58:28 +08:00
Ivan Grokhotkov
d7d6f1e376 idf_monitor: use cancellation and Console.getkey from pyserial 3.3.0+
Between 3.1.0 and 3.3.0, pyserial had thread cancellation implemented
using a select, which blocked on the stdin and an auxiliary pipe. When
thread had to be cancelled, a byte would be sent into the pipe,
unblocking stdin.

Unfortunately, this method suffers from a problem with using select on
a StreamReader (which represents the decoder wrapped around stdin).
In some cases, when the TTY sends an escape sequence in response to
an escape sequence received from serial, this escape sequence will not
be read from stdin until some key is pressed.

In https://github.com/pyserial/pyserial/commit/cab3dab, this method
was replaced with an TIOCSTI ioctl. This change makes sure we use the
new cancellation method even if the script is running with older
pyserial.
2017-08-21 15:58:28 +08:00
Kedar Sovani
8348a71847 ethernet: remove CONFIG_ETHERNET
1. Hello World application shows no footprint difference before and
after this change
2. examples/ethernet/ethernet application compiles properly (can't
test with my board)
2017-08-18 08:31:43 +05:30
Kedar Sovani
63c738de4c sdkconfig: Remove rest of the references to WIFI_ENABLED 2017-08-16 15:55:42 +05:30
Alexey Gerenkov
c2c9149a24 esp32: Apptrace API enhancement
- User down buffer configuration support
 - bugfix: ring buf - avalable write size undeflow
 - SysView down buf support updated
2017-07-24 19:57:44 +03:00
Anton Maklakov
341cc8221c CI: Make the list of examples permanent between jobs
Because the results of the 'find' command are not sorted by name.
2017-07-20 16:46:49 +08:00
Angus Gratton
b88c8d19fd Merge branch 'bugfix/project_makefile_recompile' into 'master'
build system: Updating project Makefile should trigger a full rebuild

See merge request !990
2017-07-20 10:10:00 +08:00
Angus Gratton
17adb40ca8 bootloader: Calculate SHA256 hash of image on every boot
Makes app image booting more reliable (256-bit rather than 8-bit verification.)

Some measurements, time to boot a 655KB app.bin file and run to app_main() execution.

(All for rev 1 silicon, ie no 340ms spurious WDT delay.)

80MHz QIO mode:
before = 300ms
after = 140ms

40MHz DIO mode:
before = 712ms
after = 577ms

40MHz DIO mode, secure boot enabled
before = 1380ms
after = 934ms

(Secure boot involves two ECC signature verifications (partition table, app) that take approx 300ms each with 80MHz CPU.)
2017-07-19 18:31:59 +10:00
Angus Gratton
d664e32394 build system: Use component.mk for all components, refactor bootloader build
For config-only components, component.mk should now contain "COMPONENT_CONFIG_ONLY := 1"

Also refactored some of the generation of linker paths, library list. This required cleaning up the way the bootloader
project works, it's now mostly independent from the parent.
2017-07-19 09:10:48 +10:00
Angus Gratton
b7fc16a408 build system: Updating project Makefile should trigger a full rebuild
Project Makefile can set CFLAGS, macro defines, etc.
2017-07-13 10:51:24 +08:00
Angus Gratton
c46e2edcae Merge branch 'bugfix/make_size_windows' into 'master'
make size: Fix map file parsing error on Windows

See merge request !932
2017-07-12 17:31:49 +08:00
Anton Maklakov
3cd10899e6 CI: Work around problem with running the initial 'make clean' in parallel (#18)
Just don't pass '-j' to the 'make clean' command
2017-07-07 11:03:25 +08:00
Anton Maklakov
f0b6256490 build: Fix test for the first time 'make clean' and error handling in build_examples
Now the tests do not pass

    Before we had incorrect code of the error code checking
    in build_examples.sh for that case and did nothing in test_build_system.sh.
2017-07-07 11:03:25 +08:00
Anton Maklakov
2a6b7794ab CI: Fix the unbound variables in scripts 2017-07-06 18:52:08 +08:00
Anton Maklakov
1b3594ade1 Merge branch 'bugfix/ci_wrong_getting_sources' into 'master'
Fix the getting sources

See merge request !953
2017-07-06 18:43:53 +08:00
Anton Maklakov
f194a6bdba CI: Fix the getting sources
Fix the getting sources for a case if the required commit is missed
    in the remote submodule repository.

    Also add more diagnostic.
2017-07-06 16:48:07 +08:00
Angus Gratton
fd9d889e62 mbedtls unit tests: Allow for longer timeout using software SHA
Hardware SHA runs SHA operations faster than software...
2017-07-06 15:54:01 +08:00
Anton Maklakov
8dc340d2ea CI: Add script for synchronization of the local mirrors for submodules
You should use it manually when any submodule in the esp-idf has changed

    You can mark to exclude some of them in mirror-list.txt
2017-06-30 12:07:06 +08:00
Anton Maklakov
52445ee541 CI: Use local mirrors for submodules
The CI uses the mirror-submodule-update.sh for non-permanent reassignment
    of 3rdparty sub-modules to local mirrors (only for 'non-master' branches).
    List of the mirrors in mirror-list.txt

    You can use the script locally to speed up data retrieval on network problems

    check_submodule_sync job uses 'GIT_STRATEGY: clone' to check the availability of public sources
2017-06-30 12:06:02 +08:00
Angus Gratton
f52519d7a2 CI: Use custom get_full_sources.sh script instead of gitlab-ci's strategies
Work around problems caused by failed submodule clones corrupting
    the working directory on the build runner.

    Add 10 retries for cloning submodules.
2017-06-30 12:05:17 +08:00
Anton Maklakov
35609de417 CI: Move the ci-related staff to a separate directory 2017-06-30 11:57:07 +08:00
Angus Gratton
a8f08dc5da make size: Fix map file parsing error on Windows
Closes https://github.com/espressif/esp-idf/issues/739
2017-06-29 12:54:13 +10:00
Ivan Grokhotkov
9b955f4c9f Merge branch 'feature/sysview_via_apptrace' into 'master'
sysview via apptrace

See merge request !708
2017-06-29 08:40:13 +08:00
Angus Gratton
90f1d42a9b Merge branch 'feature/better_make_size' into 'master'
build system: Add idf_size.py tool for better "make size" output

See merge request !874
2017-06-28 06:11:56 +08:00
Alexey Gerenkov
8d43859b6a esp32: SEGGER SystemView Tracing Support
Implements support for system level traces compatible with SEGGER
SystemView tool on top of ESP32 application tracing module.
That kind of traces can help to analyse program's behaviour.
SystemView can show timeline of tasks/ISRs execution, context switches,
statistics related to the CPUs' load distribution etc.

Also this commit adds useful feature to ESP32 application tracing module:
 - Trace data buffering is implemented to handle temporary peaks of events load
2017-06-27 20:52:43 +03:00
Angus Gratton
5dca92377d test runner: Print test name when starting, print filter description
Makes it easier to run tests manually.
2017-06-26 15:38:46 +10:00
Angus Gratton
5055290baf build system: Add idf_size.py tool for better "make size" output & analysis
Add new "make size_components" and "make size_files" targets for analysing makeup of the ELF file.

Plain "make size" output now looks like this:

Total sizes:
 DRAM .data size:   11156 bytes
 DRAM .bss  size:   22304 bytes
Used static DRAM:   33460 bytes ( 294220 available, 10.2% used)
Used static IRAM:   80480 bytes (  50592 available, 61.4% used)
      Flash code:  421463 bytes
    Flash rodata:  103824 bytes
Total image size:~ 616923 bytes (.bin may be padded larger)
2017-06-21 15:43:22 +10:00
Ivan Grokhotkov
b78a8ae035 unit-test-app: increase space for factory partition to 1280K 2017-06-15 18:15:36 +08:00
Angus Gratton
211580bf4f Add libsodium v1.0.12
Run some unit test cases based (poorly) around sodium's test infrastructure.

Increase in unity test task stack is due to signature tests, load a lot of data onto the stack.
2017-06-14 15:51:08 +10:00
Angus Gratton
5a1a8b4637 Merge branch 'bugfix/resume_task_cpu1_when_scheduler_disabled' into 'master'
Fix bug waking a task on CPU1 when scheduler is disabled

See merge request !819
2017-06-09 07:10:10 +08:00
Angus Gratton
f40ae10a5d freertos: add test case for ISRs waking tasks when scheduler disabled 2017-06-05 16:12:20 +10:00
Anton Maklakov
91718cc776 unit-test-app: Fix incorrect CR+LF sequence.
This caused problems with handling output by grep, sed, etc
2017-06-05 10:51:48 +08:00
He Yin Ling
9b39be9559 CI: fix bug of duplicated unit test case ID:
need to compare if different file names has the same hash value.
use relative path to IDF to keep test case ID consist.
2017-06-03 11:38:05 +08:00
Anton Maklakov
144d345b3b unit-test-app: Fix capability to use !<filter> to inverse that filter 2017-06-01 12:23:14 +08:00
Ivan Grokhotkov
972d1d9242 Merge branch 'feature/ci_test_config_autogen' into 'master'
CI: auto generate configs for test jobs

Currently CI test jobs are static configured by several pre-generated config files.
This approach have several disadvantages:

1. not flexible to select test cases to run, which is important feature of @bot
2. difficult to update test as we need to pre-generate quite a lot files
3. need to maintain extra config files in IDF
4. not flexible to support new test apps or chips, can't use some new features of test bench

Therefore we'll add assign_test stage between build and test, to generate configs for test jobs.

See merge request !738
2017-05-19 11:56:45 +08:00
Henrik Maier
b95bef4d9b Update idf_monitor.py to make --toolchain-prefix argument work
--toolchain-prefix command line argument was not taken into account when specified

Merges https://github.com/espressif/esp-idf/pull/617
2017-05-18 10:47:19 +10:00
Angus Gratton
ca4f5b9ee6 unit test runer: Add capability to use ![tag] to run all-tests-except-tag
Mostly useful for running ![ignore] to skip ignored tests.
2017-05-10 17:22:30 +10:00
Ivan Grokhotkov
04eb6f6129 Merge branch 'feature/save_esptool_flash_args' into 'master'
CI: save download config in CI build jobs:

IDF built app download config may change with some modification.
save the download configs for built APP in build stage.
then we can use the correct download config in test stage.

See merge request !676
2017-05-08 15:48:28 +08:00
He Yin Ling
b045df6507 CI: remove auto assign case script for UT:
we'll now auto assign all test cases in assign_test_case job. remove the
duplicated functions in unit test script.
2017-05-08 11:44:45 +08:00
Ivan Grokhotkov
33b8b7855e Merge branch 'bugfix/spiflash_fatfs_fixes_and_tests' into 'master'
FATFS fixes and tests

This MR includes a set of fixes related to FATFS, SDMMC, and wear levelling:

- `esp_vfs_fat_spiflash_mount` uses `FM_SFD` flag when creating the partition. The volume layout (given in `VolToPart` variable) was not compatible with SFD mode, so mkfs was failing. This fixes the volume layout to use "autodetect" for both volumes. Merges https://github.com/espressif/esp-idf/pull/559.

- fix `prepend_drive_to_path`function, which didn't prepend drive to path (while consuming 2k of stack space)

- fix stack overflow in vfs_fat_link function which allocated two 4kbyte `FIL` structures on the stack

- fix support for having two FATFS instances (in flash and SD) mounted at the same time

- unit tests written for FATFS on SDMMC are made common between SDMMC and WL implementations; FATFS unit tests on WL will run during CI

- fix inconsistent definition of PATH_MAX and ARG_MAX (TW12207, TW12104, https://github.com/espressif/esp-idf/issues/289)

See merge request !732
2017-05-05 17:03:17 +08:00
Ivan Grokhotkov
a428af8c9f unit tests: change type of flash_test partition to ‘fat’
This change makes the spi_flash test partition usable for WL and FATFS
tests.
2017-05-05 15:21:37 +08:00
Angus Gratton
72c7941b5e Unit tests: Add FreeRTOS timer tests 2017-05-05 14:38:15 +10:00
He Yin Ling
2b273388dd CI: save download config in CI build jobs:
IDF built app download config may change with some modification.
save the download configs for built APP in build stage.
then we can use the correct download config in test stage.
2017-05-02 13:17:56 +08:00
Angus Gratton
66726ec166 freertos: Enable vTaskSuspend()/vTaskResume() API
Adds relevant unit tests.

TW11878
2017-04-26 12:50:20 +10:00
Ivan Grokhotkov
b540322dc1 Merge branch 'feature/wear_levelling' into 'master'
wear levelling

This MR adds wear levelling component. It presents an interface similar to the interface of spi_flash and esp_partition. Inside, it stores data inside a partition to in a way that reduces worst case number of erase cycles for any given sector.

Also included are APIs similar to the ones provided for SDMMC to mount FAT filesystem on top of the wear levelling partition. A simple example shows how this API can be used.

Ref TW10338.

See merge request !567
2017-04-25 19:46:11 +08:00
Alexey Gerenkov
55f1a63faf esp32: Adds functionality for application tracing over JTAG
- Implements application tracing module which allows to send arbitrary
   data to host over JTAG. This feature is useful for analyzing
   program modules behavior, dumping run-time application data etc.
 - Implements printf-like logging functions on top of apptrace module.
   This feature is a kind of semihosted printf functionality with lower
   overhead and impact on system behaviour as compared to standard printf.
2017-04-17 23:26:29 +03:00
Ivan Grokhotkov
8f76fe1d7f move Catch framework header into tools directory 2017-04-17 11:01:18 +08:00
Angus Gratton
b99d5df922 unit tests: Shrink unit test partition table so tests can run on 2MB of flash 2017-04-13 17:55:49 +10:00
He Yin Ling
6a759e7cef CI: fix bug in generating UT CI runner config:
the first case ID in filter is incorrect. Should put test case ID but
not test case itself to the filter.
2017-04-10 15:35:32 +08:00
He Yin Ling
678a7b53f7 CI: revise unit test parser 2017-04-06 19:09:16 +08:00