Commit graph

71 commits

Author SHA1 Message Date
Ivan Grokhotkov
3c583a7655 sdkconfig: set CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000 by default
To increase the chances that the examples work out of the box, this
change is raising the default deep sleep wakeup delay to 1ms.
If GPIO15 is low at startup, ROM code takes less time to execute
(because no logging is performed), so more time may be needed to allow
flash chip to become ready.
2017-05-25 10:51:39 +08:00
Ivan Grokhotkov
67b08c20ec Merge branch 'bugfix/update_wifi_lib_for_some_bugs' into 'master'
esp32: update wifi lib for some bugfix

1. Fix wifi ebuf free twice issue
2. Fix wifi internal assert issue
3. Fix a bug in esp_wifi_stop
4. Fix wifi crash issue
5. Fix wifi run out of memory when 10 udp connection stability test

See merge request !745
2017-05-11 12:02:50 +08:00
Liu Zhi Fu
4235b4c13e esp32: update wifi lib for some bugfix
1. Fix wifi ebuf free twice issue
2. Fix wifi internal assert issue
3. Fix a bug in esp_wifi_stop
4. Fix wifi crash issue
5. Fix 10 UDP connection test out of memory issue
2017-05-11 11:30:08 +08:00
XiaXiaotian
b22067a8f0 Optimize configuration of base MAC address
Application developer can call APIs to configure base MAC address
    instead of using menuconfig.
2017-05-10 10:15:07 +08:00
Ivan Grokhotkov
6353bc40d7 Add support for 32k XTAL as RTC_SLOW_CLK source
- RTC_CNTL_SLOWCLK_FREQ define is removed; rtc_clk_slow_freq_get_hz
  function can be used instead to get an approximate RTC_SLOW_CLK
  frequency

- Clock calibration is performed at startup. The value is saved and used
  for timekeeping and when entering deep sleep.

- When using the 32k XTAL, startup code will wait for the oscillator to
  start up. This can be possibly optimized by starting a separate task
  to wait for oscillator startup, and performing clock switch in that
  task.

- Fix a bug that 32k XTAL would be disabled in rtc_clk_init.

- Fix a rounding error in rtc_clk_cal, which caused systematic frequency
  error.

- Fix an overflow bug which caused rtc_clk_cal to timeout early if the
  slow_clk_cycles argument would exceed certain value

- Improve 32k XTAL oscillator startup time by introducing bootstrapping
  code, which uses internal pullup/pulldown resistors on 32K_N/32K_P
  pins to set better initial conditions for the oscillator.
2017-04-26 12:43:22 +08:00
Ivan Grokhotkov
8131c77860 Merge branch 'feature/xtal_freq_autodetect' into 'master'
XTAL frequency detection, support for selecting XTAL frequency

This MR adds more robust XTAL frequency detection code (which gets run in the bootloader) and an option to set XTAL frequency in Kconfig. By default we still use autodetection, since it is more reliable than the one used in ROM code.

This will help with issues about XTAL frequency detection in high ambient temperature conditions.

Ref TW12008

See merge request !694
2017-04-25 16:30:36 +08:00
Jiang Jiang Jian
3f4e917ad6 Merge branch 'feature/ppp_over_serial' into 'master'
Enable experimental/unsupported PPP over Serial driver

From PR #272 https://github.com/espressif/esp-idf/pull/272

See merge request !690
2017-04-25 14:02:55 +08:00
Ivan Grokhotkov
6b237de909 Add XTAL frequency selection to Kconfig
This change allows XTAL frequency to be selected using menuconfig
2017-04-24 15:55:02 +08:00
Jiang Jiang Jian
29002a1c83 Merge branch 'feature/add_limit_for_all_dynamic_ebuf' into 'master'
esp32: update wifi lib for limitting dynamic wifi buffer

Add limit for all dynamic wifi ebuf to avoid wifi run out of memory in some extreme scanrio. 
The default max allocated dynamic tx buffer is 32
The default max allocated dynamic rx buffer is 64, make default value is bigger because when all packets we received are small packets, e.g. the length is 64Bytes, then 64K can hold 1000 packets, so 64 maybe a good candidate default value, anyway the customer can configure it via menuconfig.
The default dynamic wifi internal long/long-long mgmt is 32, generally 32 is enough for mgmt packet (beacon/auth/assoc/probe/null etc). Generally when all the 32 mgmt buffer is run out of memory, it means internal wifi state machine may has problem, we need to debug it.

See merge request !683
2017-04-24 11:49:50 +08:00
Jiang Jiang Jian
97142bb8db Merge branch 'feature/support_read_mac_addr_from_customer_efuse' into 'master'
Add customer MAC address that read from efuse



See merge request !673
2017-04-24 11:30:55 +08:00
XiaXiaotian
5553fbd537 add base MAC address storage choice.
Base MAC address can be stored in default manufacture-defined or customer
    pre-defined place in EFUSE and other place e.g. flash or EEPROM.
    If choose to use base MAC address which is stored in other place, please
    call esp_base_mac_addr_set_external() before initializing WiFi/BT/Ehternet.
2017-04-21 14:55:11 +08:00
Angus Gratton
f3a567b65d PPPoS: Rearrange config items (move TCP/IP stack size to LWIP), mark as experimental/unsupported
Ref #272
2017-04-21 14:23:34 +10:00
Adrian Muzyka
47c722d674 Enable lwip PPPoS support
* Fix some lwip api bugs
 * Added PPP_SUPPORT parameter to lwip Kconfig
 * Added example pppos_client

Merges #272 https://github.com/espressif/esp-idf/pull/272
2017-04-21 14:23:34 +10:00
Liu Zhi Fu
561a1a64f2 esp32: update wifi lib for limitting dynamic wifi buffer
Add limit for all dynamic wifi ebuf to avoid wifi run out of memory in some extreme scanrio
2017-04-21 10:38:00 +08:00
Alexey Gerenkov
55f1a63faf esp32: Adds functionality for application tracing over JTAG
- Implements application tracing module which allows to send arbitrary
   data to host over JTAG. This feature is useful for analyzing
   program modules behavior, dumping run-time application data etc.
 - Implements printf-like logging functions on top of apptrace module.
   This feature is a kind of semihosted printf functionality with lower
   overhead and impact on system behaviour as compared to standard printf.
2017-04-17 23:26:29 +03:00
Ivan Grokhotkov
639557d975 trace: add Kconfig options for app level trace
CONFIG_MEMMAP_TRACEMEM is now a hidden underlying option, which can be enabled using either CONFIG_ESP32_TRAX or CONFIG_ESP32_APP_TRACE
2017-04-17 22:19:14 +03:00
XiaXiaotian
03e2618d35 Add customer MAC address that read from efuse 2017-04-17 21:24:15 +08:00
Ivan Grokhotkov
7ee8ee8b7e soc: add source code of rtc_clk, rtc_pm 2017-04-11 15:45:54 +08:00
XiaXiaotian
4f89cc73e6 Add WiFi static and dynamic tx buffer choice
If static tx buffer is selected, WiFi tx buffers are allocated when WiFi is initialized and released

    when WiFi is de-initialized. If dynamic tx buffer is selected, WiFi tx buffer is allocated when tx

    data is delivered from LWIP to WiFi and released when tx data is sent out by WiFi.

    The size of each static tx buffers is fixed to about 1.6KB and the size of dynamic tx buffers is

    depend on the length of the data delivered from LWIP.

    If PSRAM is enabled, "STATIC" should be selected to guarantee enough WiFi tx buffers.

    If PSRAM is disabled, "DYNAMIC" should be selected to improve the utilization of RAM.
2017-03-30 21:25:44 +08:00
Liu Zhi Fu
abdd8feebb esp32: menuconfig adds some WiFi options
1. Add options to enable/disable AMPDU
2. Add options to enable/disable WIFI NVS
3. Add options to configure WiFi RX/TX buffer number
2017-03-02 18:13:49 +08:00
XiaXiaotian
d3eede2110 mac address: add the number of MAC address generated from efuse for user to choose
1. Add the number of MAC address generated from efuse for user to choose.

2. Add MAC address derive method.
2017-03-02 15:54:35 +08:00
XiaXiaotian
23f933a78d mac address: add user set mac address
add menuconfig for user to set mac address of wifi, bt and ethernet.
2017-03-01 20:42:46 +08:00
XiaXiaotian
770c2ade05 phy init: modify some comments 2017-02-20 10:44:40 +08:00
XiaXiaotian
cd13c9e95d disable phy and rf
1. add a macro in menuconfig for users to choose whether store phy calibration data into NVS or not.

2. rename some disable phy and rf APIs so that existing code which calls old APIS will fail to compile.
2017-02-17 10:24:55 +08:00
XiaXiaotian
eb14284c92 disable PHY and RF when stop WiFi and disable BT
1. Add disable PHY and RF when WiFi and BT are both disabled(including call sniffer disable API).

2. Do not init PHY and RF when cpu start. Init PHY and RF when call Wifi or BT start APIs(including sniffer enable API).

3. Add a temporary lib: librtc_clk.a and will delete it when CPU frequency switching function is done.

4. Add an function to get OS tick rate.

5. Do not put the whole pp.a in iram0, only put lmac.o, ieee80211_misc.o, ets_time.o and wdev.o in iram0.
2017-02-17 10:24:54 +08:00
Liu Zhi Fu
7093c59a74 esp32: update wifi lib for some fixes and optimizations
1. Reduce the default static rx buffer size from 25 to 10
2. Adjust ampdu interrupt size to 3, namely, raise 1 interrupt per 3-mpdu
3. Make a copy for all received packets, including AMSDU/AMPDU/MPDU
4. Fix softap mis-forward issue
5. Fix pp q full issue
6. Fix sniffer copy wrong content issue
2017-02-10 10:28:03 +08:00
Ivan Grokhotkov
b1df4c47f9 kconfig: define ESP32_PHY_MAX_TX_POWER if PHY_ENABLED
ESP32_PHY_MAX_TX_POWER option is only meaningful for WiFi, so previous
change made it depend on WIFI_ENABLED. However if WiFi is not enabled,
but BT is, this option becomes undefined which breaks phy_init_data
generation.

This change turns ESP32_PHY_MAX_TX_POWER into a hidden parameter, which
depends on PHY_ENABLED. New user-visible parameter,
ESP32_PHY_MAX_WIFI_TX_POWER is introduced which depends on WIFI_ENABLED
and is used as default value for ESP32_PHY_MAX_TX_POWER if WIFI_ENABLED
is set. Otherwise ESP32_PHY_MAX_WIFI_TX_POWER is set to 20.
2017-01-19 10:58:09 +08:00
Tian Hao
97e3c0fec4 kconfig: move PHY-related settings into new menu
- PHY options must be shown when either WIFI or BT is enabled.

- Add clarification that TX power option applies to WiFi only.
2017-01-19 00:30:20 +08:00
shangke
53b0b03e63 esp_event: event stack overflow 2017-01-16 17:06:12 +08:00
Ivan Grokhotkov
0d00a1ba01 vfs: implement reading from UART 2017-01-16 11:33:32 +08:00
Ivan Grokhotkov
ca9f62ad77 Merge branch 'feature/esp32_core_dump' into 'master'
esp32 core dump to flash

1.  menuconfig option to select where to store core dump: flash, uart or disable
2. Saving of core dump to flash
3. Partition table definitions files with core dump partition
4. Python scripts to support core dump generation from GDB command line

See merge request !341
2017-01-13 11:51:40 +08:00
Alexey Gerenkov
ad66fbe5ad esp32: Fixes issues discussed during code review of MR!341
The following issues mentioned during MR!341 review were fixed:
1) Core dump test application description
2) Usage of CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH and CONFIG_ESP32_ENABLE_COREDUMP_TO_UART
3) FLASH_GUARD_START macro usage is fixed in flash API
4) Core dump module logging facility
5) cache util functions doc updated
6) interactive delay before print core dump to uart
7) core dump partion support in build system
2017-01-12 19:38:19 +03:00
Ivan Grokhotkov
b24ac487cb newlib: use RTC_STORE registers to keep boot time instead of RTC_SLOW_MEM
This allows RTC_SLOW_MEM to be powered down in deep sleep if no other variables are placed into RTC_SLOW_MEM.
2017-01-12 14:43:34 +08:00
Alexey Gerenkov
4a3e160888 esp32: Add core dump saving to flash feature
Complimentary changes:
1) Partition table definitions files with core dump partition
2) Special sub-type for core dump partition
3) Special version of spi_flash_xxx
4) espcoredump.py is script to get core dump from flash and print useful info
5) FreeRTOS API was extended to get tasks snapshots
2017-01-11 20:51:28 +03:00
Angus Gratton
26d1a23308 config: Move WiFi & BT toggles to Components menu, same as Ethernet 2017-01-10 16:39:43 +11:00
Angus Gratton
2e78b397bc config: Simplify WiFi & Bluetooth config options
Removes redundant menu options, splits WiFi configuration out from
generic ESP32 configuration.
2017-01-10 16:04:04 +11:00
Angus Gratton
433ff1474e WiFi software coexistence: Clarify KConfig description
Ref http://esp32.com/viewtopic.php?f=13&t=844&p=3576
2017-01-10 11:11:27 +11:00
XiaXiaotian
7853893731 wifi: add wifi rx buffer number config in menuconfig 2017-01-06 10:12:27 +08:00
Ivan Grokhotkov
eac80b0651 deep sleep: add option to delay CPU startup
When ESP32 wakes up from deep sleep, flash is accessed an approximately 900us after power on.
Some flash chips need more time to become ready. This change adds a menuconfig option to add
some delay to the default deep sleep wake stub.

Fixes https://github.com/espressif/esp-idf/issues/117
2016-12-16 14:30:27 +08:00
Ivan Grokhotkov
221dc13535 newlib: add "full" formatting support, add missing functions
- add two versions of libc: libc.a and libc_nano.a. First one has full C99 formatting support, second one uses “nano” formatting functions available in ROM.
- fix linker error for fmod, fmodf, atof, atoff
- update tests
2016-12-08 11:04:54 +08:00
Ivan Grokhotkov
b3f6cd08db support for console redirection to other UART
This change adds a set of menuconfig options to set custom UART#, baud rate, and pins, for console output.
Setting happens in bootloader startup code for PRO CPU, and in application startup code for APP CPU.
Ref. TW8146
2016-12-08 01:42:37 +08:00
Tian Hao
55e0690f69 component/bt : wifi/bt software coexist option
1. option of sw coexist
2. cpu set freq function modify
3. update lib
4. ld add static data address
2016-11-24 19:57:47 +08:00
Tian Hao
7a41ab6982 Merge branch 'master' into feature/btdm_bluedroid
1. update bt lib submodule

# Conflicts:
#	components/bootloader/src/main/esp32.bootloader.ld
#	components/bt/component.mk
#	components/esp32/component.mk
#	components/esp32/lib
2016-11-24 15:45:04 +08:00
Ivan Grokhotkov
541b142654 phy_init: reduce the amount of hardwired logic, add coexist init 2016-11-18 20:11:17 +08:00
Ivan Grokhotkov
4db29f74a0 add PHY init support 2016-11-18 20:11:16 +08:00
Ivan Grokhotkov
299655e3be esp32: add choice for RTC clock source
For now only one option is supported: internal RC oscillator
2016-11-03 17:37:15 +08:00
Ivan Grokhotkov
eb2c633cbf newlib: implement settimeofday, integrate LwIP SNTP, add SNTP example 2016-11-03 12:46:46 +08:00
Ivan Grokhotkov
c534dedf2d newlib: implement time syscalls 2016-11-02 17:31:35 +08:00
Tian Hao
d472ff5856 Merge branch 'master' into feature/btdm_bluedroid
1.update esptool submodule
2.new esp32 lib and new phy lib
3.new bt lib
4.soc.h add comment
2016-11-01 17:53:59 +08:00
Ivan Grokhotkov
5ffd6155f2 set default interrupt watchdog timeout to 300ms
10ms is too low for openocd/gdb to work, so it's not a very useful default value.
2016-10-28 16:17:41 +08:00