Commit graph

1360 commits

Author SHA1 Message Date
lly
968772d18a ble_mesh: Typo in condition in comp_add_elem of cfg_srv [Zephyr]
Vendor model IDs take up four (not two) bytes in the composition
2020-05-13 03:40:30 +00:00
lly
a45406fe6e ble_mesh: GATT Proxy Spec 1.0.1 changes [Zephyr]
Backport of https://github.com/apache/mynewt-nimble/pull/724

Mesh spec 1.0.1 changes proxy disabling behavior to only affect the
relaying from proxy nodes. Previously, disabling proxy would shut down
all proxy and node activity.

Tweaks from the original commit:
- Removed redundant call to bt_mesh_adv_update() in gatt_proxy_set()
- Removed invalid ref to 4.2.11.1 in node_identity_set()

---

According to Mesh Profile Spec 1.0.1, Section 4.2.11:
"If the Proxy feature is disabled, a GATT client device can connect
over GATT to that node for configuration and control. Messages from
the GATT bearer are not relayed to the advertising bearer."

Moreover some notes have been removed from the spec compared to
version 1.0:

Mesh Profile Spec 1.0, Section 4.2.11:

"Upon transition from GATT Proxy state 0x01 to GATT Proxy state 0x00
the GATT Bearer Server shall disconnect all GATT Bearer Clients."

"The Configuration Client should turn off the Proxy state as the last
step in the configuration process."

Mesh Profile Spec 1.0, Section 4.2.11.1:

"When the GATT Proxy state is set to 0x00, the Node Identity state
for all subnets shall be set to 0x00 and shall not be changed."
2020-05-13 03:40:30 +00:00
lly
10f2ed14eb ble_mesh: Support reliable sending when publishing [Zephyr]
Until now the choice of reliable sending (segmented messages with
acks) was implicitly dependent on the size of the payload. Add a new
member to the bt_mesh_model_pub to force using segment acks even when
the payload would fit a single unsegmented message.
2020-05-13 03:40:30 +00:00
lly
cd19f6faf1 ble_mesh: Check device uuid when init provisioning 2020-05-13 03:40:30 +00:00
lly
abcfcc47ec ble_mesh: Fix provisioning buffer initialization [Zephyr]
When PB-GATT support has been enabled the provisioning code "borrows"
the buffer from the proxy code. However, the way that initialization
was happening the proxy buffers were initialized only after
provisioning initialization, resulting in a corrupted buffer with
buf->data pointing to NULL. Reorder the initialization calls so that
proxy is done first and provisioning only after it.
2020-05-13 03:40:30 +00:00
lly
e580f98b44 ble_mesh: Skip publish if update fails [Zephyr]
Allow models to skip a periodic publish interval by returning an error
from the publish update callback.

Previously, an error return from publish update would cancel periodic
publishing. This can't be recovered from, and as such, no valid model
implementation could return an error from this callback, and there was
no way to skip a periodic publish.
2020-05-13 03:40:30 +00:00
lly
50b4bea45c ble_mesh: Enable Segmented Control Messages [Zephyr]
The function bt_mesh_ctl_send() used to support maximum length of
11 bytes. The segmentation complies with the BLE Mesh Standard.
The ack is disabled in case of non unicast address.
2020-05-13 03:40:30 +00:00
lly
4748b07fa2 ble_mesh: Not ignore msg when fast prov is enabled
When fast provisioning is enabled, Provisioner shall not
ignore messages from the nodes whose addresses are not in
the provisioning database. Because other nodes which are
not provisioned by the Primary Provisioner will send node
address messages to the Primary Provisioner.
2020-05-13 10:10:40 +08:00
Island
2c1c87b37d Merge branch 'bugfix/ble_mesh_add_missing_cpp_v3.3' into 'release/v3.3'
ble_mesh: Add missing #ifdef __cplusplus (v3.3)

See merge request espressif/esp-idf!8615
2020-05-06 18:16:20 +08:00
Island
4ac84bca8b Merge branch 'bugfix/ble_mesh_compile_error_o2_v3.3' into 'release/v3.3'
ble_mesh: Fix compile error when -O2 (performance) is chosen (v3.3)

See merge request espressif/esp-idf!8618
2020-05-06 18:15:28 +08:00
Island
5a53e67c7e Merge branch 'bugfix/ble_mesh_provisioner_check_key_v3.3' into 'release/v3.3'
ble_mesh: Check if appkey exist before deleting it (v3.3)

See merge request espressif/esp-idf!8619
2020-05-06 18:09:32 +08:00
lly
745aecb03d ble_mesh: Fix node not erase info completely
Previously only mesh node info is supported to be stored
in flash. So when trying to reset the node, we only need
to judge if the BLE_MESH_VALID flag is set.
Currently we support storing both node & Provisioner info
in flash, when trying to erase the node info from flash,
the BLE_MESH_NODE flag will be checked. So we need to set
bt_mesh.flags to 0 when all the erase operations are done.
2020-05-06 11:45:02 +08:00
lly
e36d1d2f8a ble_mesh: Check if appkey exist before deleting it 2020-05-06 11:37:03 +08:00
lly
1432daf4c6 ble_mesh: Add length check for some mesh operations 2020-05-06 11:33:41 +08:00
lly
6e7d43dd89 ble_mesh: Fix compile error when -O2 (performance) is chosen 2020-05-06 11:33:08 +08:00
lly
3b9e0657d8 ble_mesh: Add missing #ifdef __cplusplus 2020-05-06 11:19:05 +08:00
Island
53a0b3f951 Merge branch 'feat/ble_mesh_ble_adv_simultaneously_v3.3' into 'release/v3.3'
ble_mesh: Support BLE advertising simultaneously (v3.3)

See merge request espressif/esp-idf!8486
2020-05-06 11:14:52 +08:00
Island
b0aeff4797 Merge branch 'bugfix/ble_mesh_rpl_list_size_v3.3' into 'release/v3.3'
ble_mesh: Associate replay protection list size with nodes count (v3.3)

See merge request espressif/esp-idf!8497
2020-05-06 11:14:42 +08:00
Island
b33b6c4f2a Merge branch 'doc/ble_mesh_fixes_v3.3' into 'release/v3.3'
doc: Fix some ble mesh description (v3.3)

See merge request espressif/esp-idf!8504
2020-05-06 11:12:46 +08:00
Island
93a13dfd10 Merge branch 'feat/ble_mesh_sensor_model_example_v3.3' into 'release/v3.3'
ble_mesh: Add ble mesh sensor model examples (v3.3)

See merge request espressif/esp-idf!8509
2020-05-06 11:11:36 +08:00
lly
a2dbe4c452 ble_mesh: Fix client local parameters not initialized 2020-04-30 11:47:12 +00:00
lly
eedaf45f43 ble_mesh: Continue node info restore even if failure happens
During BLE Mesh Provisioner initialization, the stack will restore
the nodes information if settings storage is enabled.
Previously when a failure happens (e.g. found the same uuid) during
the restore procedure, the information of the following nodes will
not be restored and error will be directly returned.
But this will introduce some problem with user experience, because
some newly provisioned nodes information will not be restored and
Provisioner will not be able to control those nodes.
So we change the operation here, when a failure happens during the
restore procedure, Provisioner will only ignore the information of
the current node and continue restoring other nodes information.
2020-04-30 11:47:12 +00:00
lly
eabf436a23 ble_mesh: Remove some redundant functions 2020-04-30 11:47:12 +00:00
lly
63ab37d721 ble_mesh: Notify unprovisioned device beacon to application layer
With this change, if a Provisioner has provisioned the maximum
number of nodes, it can still report the unprovisioned device
beacon from other nodes to the application layer. And this will
be more reasonable compared with the previous implementation.
Previously when the node array of Provisioner is full, no beacon
from unprovisioned devices will be reported, only some warning
logs will be given.
2020-04-30 11:47:12 +00:00
lly
77cf16e337 ble_mesh: Check if assigned node address is duplicated
Previously only check the node address when it is assigned by the
application layer. Here we also check the address when the address
is allocated internally. And this will be useful when some mesh
internal tests are performed.
2020-04-30 11:47:12 +00:00
lly
80feb4e70a ble_mesh: Update next alloc address when node info is added 2020-04-30 11:47:12 +00:00
lly
9cb7faf4bd ble_mesh: Fix Provisioner provisioning deadlock 2020-04-30 11:47:12 +00:00
lly
fecfd754d9 ble_mesh: Remove BLE_MESH_MAX_STORED_NODES option
Previously the BLE_MESH_MAX_STORED_NODES option is added for
internal mesh test, which will be a little confusing for the
users to understand.
Here we remove this option, instead the BLE_MESH_MAX_PROV_NODES
will be used for all the cases. For mesh internal test, when
the test function is called to add some nodes info, the info
will be stored in the array of provisioned nodes directly.
2020-04-30 11:47:12 +00:00
lly
dbc44ccc7e ble_mesh: Associate replay protection list size with nodes count
The replay protection list of Provisioner should be at least equal
to the number of nodes with the precondition that each node contains
only one element.
The help information of replay protection list is updated, and the
maximum number of nodes for Provisioner is adjusted based on the
replay protection list size.
2020-04-30 11:47:12 +00:00
lly
6e45c091e3 doc: Fix some ble mesh description 2020-04-30 11:39:07 +00:00
lly
d77da91ffb ble_mesh: Add some common macros for sensor model 2020-04-30 11:32:53 +00:00
lly
13817a190c ble_mesh: Allow empty sensor series column value 2020-04-30 11:32:53 +00:00
lly
4e858153a8 ble_mesh: Check if same sensor (settings) property id exists 2020-04-30 11:32:53 +00:00
lly
ca95b54ce4 ble_mesh: Allow empty sensor settings exist 2020-04-30 11:32:53 +00:00
lly
9b1b2f9b5d ble_mesh: Support BLE advertising simultaneously 2020-04-30 08:23:24 +00:00
lly
caeb040857 ble_mesh: Fix time scene wrong macro name 2020-04-27 16:27:52 +08:00
lly
012b810d29 ble_mesh: Add ble mesh white list test function
Using the ble mesh white list test functions, a node can choose to
only receive mesh messages from a specific node and relay the
messages for it. Messages from other nodes will be ignored.
2020-04-26 06:44:45 +00:00
Jiang Jiang Jian
f3f88e241b Merge branch 'bugfix/btdm_backports_v3.3_0328' into 'release/v3.3'
Bugfix/btdm backports v3.3 0328

See merge request espressif/esp-idf!8153
2020-04-16 21:08:10 +08:00
xiewenxiang
23474dc737 component/bt: fix don't dequeue the command queue after process the read_by_type_req(backport v3.3) 2020-03-31 16:45:57 +08:00
baohongde
0ac0a3126f components/coex: Fix wakeup delay with DFS 2020-03-28 21:15:21 +08:00
baohongde
41fe01cc99 components/bt: Fix assert when create conntion cancel 2020-03-28 21:08:52 +08:00
Island
151b6d9bef Merge branch 'bugfix/allow_adv_stop_again_in_host' into 'release/v3.3'
Fix allow to send stop adv hci cmd when host adv state is disable

See merge request espressif/esp-idf!7993
2020-03-17 23:52:04 +08:00
lly
cc07e9d203 ble_mesh: Fix ble mesh nimble host deinit 2020-03-17 14:42:46 +08:00
gengyuchao
ab175f8845 fix allow to send stop adv hci cmd when host adv state is disable 2020-03-16 21:37:07 +08:00
Jiang Jiang Jian
bf568f2eb4 Merge branch 'bugfix/ble_mesh_miscellaneous_fix_v3.3' into 'release/v3.3'
Bugfix/ble mesh miscellaneous fix (v3.3)

See merge request espressif/esp-idf!7971
2020-03-16 13:27:35 +08:00
Jiang Jiang Jian
36cddd0bae Merge branch 'bugfix/ble_mesh_update_3.3' into 'release/v3.3'
Bugfix/ble mesh update 3.3

See merge request espressif/esp-idf!7801
2020-03-16 13:26:44 +08:00
Prasad Alatkar
4fb4c01c53 NimBLE: Add Host based privacy (RPA) feature support (v3.3)
- This feature removes dependency on controller to use privacy (RPA)
2020-03-15 21:43:01 +05:30
Prasad Alatkar
237f7eb92a NimBLE: Fix check for static random address & add MSYS_1 in menuconfig (v3.3) 2020-03-15 21:43:01 +05:30
Hrishikesh Dhayagude
5ca8851be8 NimBLE: Use dynamic buffers instead of static memory (v3.3)
The NimBLE host buffers that consume a significant amount of memory are
now allocated dynamically.
The advantage is that, the memory can be reclaimed in cases where BLE
is turned off and not required for the current boot cycle
2020-03-15 21:43:01 +05:30
Prasad Alatkar
b6c88b683f NimBLE: Misc changes in host flow control, ble_gap_unpair, ble_hs_hci_rx_evt & example (v3.3)
- Add menuconfig option for NimBLE host flow control
- Include changes in `blecent` example from upstream PR!702
- add ble_hs_lock in ble_gap_unpair Upstream PR!584
- ble_hs_hci_rx_evt, upstream PR!738
2020-03-15 21:43:01 +05:30
lly
a8763e6517 ble_mesh: Move dev_role to the end of model_pub 2020-03-13 19:53:26 +08:00
lly
de022501b7 ble_mesh: Use the right netkey during iv update 2020-03-13 19:53:23 +08:00
lly
0d6dd36af9 ble_mesh: Use the right net_idx & app_idx for publish 2020-03-13 19:53:19 +08:00
lly
68dba56ac8 ble_mesh: Check buf->ref before unref the buffer 2020-03-13 19:53:16 +08:00
lly
9f32f4b405 ble_mesh: Fix mesh memory use-after-free issue 2020-03-13 19:53:12 +08:00
lly
c19a01d100 ble_mesh: Add ble mesh deinit in btc task 2020-03-13 19:53:08 +08:00
lly
2ae6eedb30 ble_mesh: Free beacon timer when deinit mesh 2020-03-13 19:53:02 +08:00
lly
e73ad2c391 ble_mesh: Use lock for mesh timer operations 2020-03-13 19:52:50 +08:00
Mahavir Jain
6babdfc0b7 ipc: prevent code getting pulled in for unicore configuration 2020-03-12 16:28:00 +05:30
Chinmay Chhajed
72fb22ed51 This MR is intended to fix Bluetooth event scheduling when WiFi is also enabled.
The global interrupts will be disabled before taking current
time for scheduling further bluetooth events. Earlier disabling
interrupts was taking some time because of which WiFi events were
interrupting in current bluetooth scheduling.

Also fixes ble crash issue triggered by ble event irq miss (0x20000).
2020-03-05 18:58:28 +05:30
lly
0e2c77b185 ble_mesh: Calc incomplete timeout based on msg info 2020-02-27 15:47:26 +08:00
lly
91ad0f9f4a ble_mesh: Start the timer when starting to send the client message 2020-02-27 15:47:12 +08:00
lly
70eadc0b05 ble_mesh: No timeout for client message to non-unicast address 2020-02-27 15:46:54 +08:00
lly
49fc8c86b3 ble_mesh: Unify client application and lower transport layer timeout 2020-02-27 15:46:19 +08:00
lly
04a6ac3cf5 ble_mesh: Allow maximum 377 octets payload 2020-02-27 15:46:03 +08:00
lly
9fa5c14d58 ble_mesh: Reset transport info when node is removed 2020-02-27 15:45:46 +08:00
lly
cc19e1da9b ble_mesh: Provisioner ignores msg from removed node 2020-02-27 15:45:15 +08:00
June
2548168277 backport mr !6031 - fix security info restore bug 2020-02-21 20:17:17 +08:00
Jiang Jiang Jian
7ab0a59bb3 Merge branch 'bugfix/host_and_example_bugfix_backport_to_v3.3' into 'release/v3.3'
Bugfix/host and example bugfix backport to v3.3

See merge request espressif/esp-idf!7723
2020-02-21 18:15:48 +08:00
Jiang Jiang Jian
7d1c44fb7e Merge branch 'bugfix/btdm_role_switch_v3.3' into 'release/v3.3'
Fix bugs about role switch

See merge request espressif/esp-idf!7721
2020-02-21 17:49:46 +08:00
gengyuchao
94255c421d Fix some typo in idf release v3.3 2020-02-20 20:05:10 +08:00
gengyuchao
b6e9a15e81 Component/bt :
Add handling of osi memory calloc failure.
Add length check for snprintf in osi config.
2020-02-20 19:39:03 +08:00
gengyuchao
53664c80ff component/bt: Fix the issue with pointer type conversion in gattc. Unified att(db_sizedb_size) count pointer type in bta and btc, change pointer type in bta from int to uint16_t. 2020-02-20 19:16:01 +08:00
baohongde
74b964ed67 Fix bugs about role switch
Jitter in FHS
Jitter in first PULL
Receive EDR packet fail after role switch
2020-02-20 19:11:45 +08:00
gengyuchao
6241139685 example/ble_throughput:
Fixed the throughput wasting memory and packet loss issues.
Fixed the throughput crash bug because of using the Mutex.
2020-02-20 18:05:23 +08:00
gengyuchao
4375e60a6e bugfix: ble add missing gatt descriptors 2020-02-20 17:54:45 +08:00
Jiang Jiang Jian
26383e95fd Merge branch 'feature/esp32_5p0_backport_v3p3' into 'release/v3.3'
backport esp325p0 new features and code optimize to v3.3

See merge request espressif/esp-idf!7564
2020-02-20 17:38:23 +08:00
Jiang Jiang Jian
365092fb57 Merge branch 'bugfix/coex_a2dp_stuck_after_creating_another_connection_v3.3' into 'release/v3.3'
components/coex: Fix a2dp stuck after creating another connection

See merge request espressif/esp-idf!7663
2020-02-20 14:16:53 +08:00
Jiang Jiang Jian
3aa0922221 Merge branch 'bugfix/controller_initializer_order' into 'release/v3.3'
fix initializer order for BT_CONTROLLER_INIT_CONFIG_DEFAULT

See merge request espressif/esp-idf!7623
2020-02-19 17:09:17 +08:00
Jiang Jiang Jian
a4bbcbcf98 Merge branch 'bugfix/ble_mesh_fix_compile_error_with_cpp_3.3' into 'release/v3.3'
ble_mesh: Fix compile error with c++ files (v3.3)

See merge request espressif/esp-idf!7585
2020-02-18 20:44:31 +08:00
baohongde
7592ec77f5 components/coex: Fix a2dp stuck after creating another connection 2020-02-18 20:22:48 +08:00
June
eec53257dc backport esp32 5p0 new features to v3p3 2020-02-18 15:21:07 +08:00
Jiang Jiang Jian
9b67208b14 Merge branch 'hfp_a2dp_iphone_3.3' into 'release/v3.3'
components bt/: Disable sniff mode during (e)SCO connection for HFP. [backport 3.3]

See merge request espressif/esp-idf!7250
2020-02-14 16:48:06 +08:00
Jiang Jiang Jian
91f0fcc3b3 Merge branch 'feat/nimble_esp_ble_mesh_v3.3' into 'release/v3.3'
Add support of NimBLE host in ESP-BLE-Mesh (backport v3.3)

See merge request espressif/esp-idf!7510
2020-02-14 16:43:05 +08:00
Hrishikesh Dhayagude
cf6f1e8246 Add support of NimBLE host in ESP-BLE-Mesh - v3.3 2020-02-13 12:33:23 +05:30
lly
46b1608f44 ble_mesh: Fix compile error with c++ files 2020-02-13 09:58:56 +08:00
Jiang Jiang Jian
2eb4374a5b Merge branch 'bugfix/coex_schm_rebased_v3.3' into 'release/v3.3'
components/esp_wifi: improve coexistence performance according to specific WiFi/BT/BLE scienario (Backport v3.3)

See merge request espressif/esp-idf!7410
2020-02-12 17:07:18 +08:00
Xia Xiaotian
a41443184e components/esp_wifi: improve coexistence performance according to specific WiFi/BT/BLE scienario
1. Improve WiFi throughput in some Classic BT scienarios(idle, inquire scan,
       connected, sniff, a2dp pause, etc).

    2. Support WiFi + Classic BT + BLE mesh coexistence scienario.

    3. Improve WiFi scan and connect succeed ratio in coexistence scienario.

    4. Do not support to choose software coexistence preference anymore for it is
       determined according to coexistence scienario automatically.

components/lwip: increase TCP send buffer and receive window limitation when TCP window scale is enabled

components/ble_mesh: Fix some bugs about ble mesh

    1. fix send acl pkt after ble have sent terminate ind modify min adv interval to 10ms.
2020-02-12 16:13:28 +08:00
El Jeffo
79dff0ef12 fix initializer order for BT_CONTROLLER_INIT_CONFIG_DEFAULT 2020-02-07 18:59:03 +08:00
Angus Gratton
fd348b7bd8 bugfix: bt Kconfig included a UTF-8 comma
Displays incorrectly on Python 3, but can crash Python 3 if the system default encoding is not utf-8
2020-02-07 09:10:56 +11:00
Hrishikesh Dhayagude
a03b9c7465 Add NimBLE files in ESP-BLE-Mesh again
Revert "ble_mesh: Remove NimBLE implementation for ESP-BLE-MESH"

This reverts commit 925f93614c.
2020-02-05 13:37:54 +05:30
lly
925f93614c ble_mesh: Remove NimBLE implementation for ESP-BLE-MESH 2020-02-03 12:04:00 +08:00
lly
b19671e0d4 ble_mesh: Add ESP BLE Mesh implementation
1. BLE Mesh Core

    * Provisioning: Node Role
        * PB-ADV and PB-GATT
        * Authentication OOB

    * Provisioning: Provisioner Role
        * PB-ADV and PB-GATT
        * Authentication OOB

    * Networking
        * Relay
        * Segmentation and Reassembly
        * Key Refresh
        * IV Update

    * Proxy Support

    * Multiple Client Models Run Simultaneously
        * Support multiple client models send packets to different nodes simultaneously
        * No blocking between client model and server

    * NVS Storage
        * Store BLE Mesh node related information in flash
        * Store BLE Mesh Provisioner related information in flash

2. BLE Mesh Models

    * Foundation Models
        * Configuration Server Model
        * Configuration Client Model
        * Health Server Model
        * Health Client Model

    * Generic
        * Generic OnOff Server
        * Generic OnOff Client
        * Generic Level Server
        * Generic Level Client
        * Generic Default Transition Time Server
        * Generic Default Transition Time Client
        * Generic Power OnOff Server
        * Generic Power OnOff Setup Server
        * Generic Power OnOff Client
        * Generic Power Level Server
        * Generic Power Level Setup Server
        * Generic Power Level Client
        * Generic Battery Server
        * Generic Battery Client
        * Generic Location Server
        * Generic Location Setup Server
        * Generic Location Client
        * Generic Admin Property Server
        * Generic Manufacturer Property Server
        * Generic User Property Server
        * Generic Client Property Server
        * Generic Property Client

    * Sensor Server Model
        * Sensor Server
        * Sensor Setup Server
        * Sensor Client

    * Time and Scenes
        * Time Server
        * Time Setup Server
        * Time Client
        * Scene Server
        * Scene Setup Server
        * Scene Client
        * Scheduler Server
        * Scheduler Setup Server
        * Scheduler Client

    * Lighting
        * Light Lightness Server
        * Light Lightness Setup Server
        * Light Lightness Client
        * Light CTL Server
        * Light CTL Setup Server
        * Light CTL Client
        * Light CTL Temperature Server
        * Light HSL Server
        * Light HSL Setup Server
        * Light HSL Client
        * Light HSL Hue Server
        * Light HSL Saturation Server
        * Light xyL Server
        * Light xyL Setup Server
        * Light xyL Client
        * Light LC Server
        * Light LC Setup Server
        * Light LC Client

3. BLE Mesh Applications

    * BLE Mesh Node
        * OnOff Client Example
        * OnOff Server Example

    * BLE Mesh Provisioner
        * Example

    * Fast Provisioning
        * Vendor Fast Prov Server Model
        * Vendor Fast Prov Client Model
        * Examples

    * Wi-Fi & BLE Mesh Coexistence
        * Example

    * BLE Mesh Console Commands
        * Examples
2020-02-03 12:03:36 +08:00
baohongde
30779731ea components/bt: backport release/v3.3
Fix A2DP stuck when BLE's interval is too small
Bugfix that bluetooth controller may not be able to enter sleep after end of wake up request
Fix LMP sniff req timeout
2020-01-16 15:47:31 +08:00
zhiweijian
5187d64c34 component/bt: fix blufi prepare write buf len invalid 2020-01-14 17:45:40 +08:00
zhiweijian
927c4afa5b Component/bt: Fix GATTC trigger open event multiple times 2020-01-14 17:41:45 +08:00
weitianhua
e284ff818b hfp a2dp iphone 3.3 2020-01-08 19:37:51 +08:00
baohongde
611c0c3897 components/bt: Choose AVRC category according to A2DP role 2019-12-31 15:31:54 +08:00
baohongde
09b8979987 components/bt: Revert changes of security mask 2019-12-25 20:13:35 +08:00
baohongde
83184631a4 components/bt: Disable some unsupported security mask 2019-12-22 08:56:18 +00:00
Geng Yu Chao
db8bcc60f9 Bugfix/btdm fix doc and host bug backport v3.3 2019-12-18 14:19:13 +08:00
Jiang Jiang Jian
97dba89daf Merge branch 'bugfix/btdm_avrc_metadata_length_error_v3.3' into 'release/v3.3'
components/bt: Fix AVRC metadata length error

See merge request espressif/esp-idf!6884
2019-12-16 14:07:20 +08:00
Angus Gratton
88cf7ed87e Merge branch 'bugfix/wifi_internal_memory_v3.3' into 'release/v3.3'
wifi: Include DMA reserved pool when allocating internal-only memory (v3.3)

See merge request espressif/esp-idf!6628
2019-12-16 13:39:43 +08:00
Jiang Jiang Jian
82f1be5e5a Merge branch 'bugfix/hfp_client_indication_v3.3' into 'release/v3.3'
component/bt: Fix bugs in HFP feature v3.3

See merge request espressif/esp-idf!6852
2019-12-16 11:32:10 +08:00
Jiang Jiang Jian
7b73cf613c Merge branch 'component_bt/osi_fixed_queue_v3.3' into 'release/v3.3'
component_bt/: Fix_pointer_type_fixed_queue v3.3

See merge request espressif/esp-idf!6847
2019-12-16 11:31:24 +08:00
Angus Gratton
876ac4e963 bt: Include DMA reserved pool when allocating internal-only memory
Fix for root cause of https://github.com/espressif/esp-idf/issues/3592
2019-12-12 23:09:59 +00:00
weitianhua
3ceae811be adaptation for nano-format 2019-11-29 17:55:22 +08:00
weitianhua
8977e92b4c component_bt/:bugfix_hfp_client_indication_define_and_cnum_error 2019-11-29 16:22:34 +08:00
baohongde
42b2524776 components/bt: Fix AVRC metadata length error 2019-11-29 15:56:51 +08:00
Jiang Jiang Jian
faf96bd108 Merge branch 'bugfix/btdm_run_out_of_frame_element_v3.3' into 'release/v3.3'
components/bt: Fix assert due to no free element form

See merge request espressif/esp-idf!6701
2019-11-27 22:22:33 +08:00
weitianhua
97b43b4054 component_bt/: Fix pointer type in fixed_queue 2019-11-27 16:09:44 +08:00
Jiang Jiang Jian
51a49a861a Merge branch 'bugfix/btdm_assert_deinit_a2dp_while_playing_v3.3' into 'release/v3.3'
components/bt: Fix assert when deinit A2DP while playing music

See merge request espressif/esp-idf!6535
2019-11-14 20:12:31 +08:00
baohongde
0f7dc2ec02 components/bt: Fix assert due to no free element form 2019-11-14 15:51:39 +08:00
Xia Xiaotian
9592346090 Coexist: fix some coexist bugs
1. Fix high beacon and broadcast packets loss ratio of WiFi to make
   MDNS test pass.
2. Improve stability of WiFi performance with a little
   sacrifice of throughput.
3. Improve BLE advertising and connection performance with dynamic
   priority. It sacrifices a little WiFi throughput, but achieves balance
   between WiFi and Bluetooth.
4. fix bug bb reset lock flag to avoid bb reset lock unhandle
5. fix bug wifi reset mac cause task watch dog timeout
6. fix bug wifi reset mac position
2019-10-29 17:18:12 +00:00
Jiang Jiang Jian
1dd8411e04 Merge branch 'bugfix/coex_semaphore_take_in_isr_lock_v3.3' into 'release/v3.3'
fix bug that semaphore may schedule out in ISR locking (v3.3)

See merge request espressif/esp-idf!6427
2019-10-30 00:49:42 +08:00
Jiang Jiang Jian
e6a71fe29c Merge branch 'bugfix/btdm_disable_bt_gatt_v3.3' into 'release/v3.3'
components/bt: Disable BR/EDR GATT

See merge request espressif/esp-idf!6506
2019-10-30 00:48:14 +08:00
baohongde
c570e253fe components/bt: Fix assert when deinit A2DP while playing music 2019-10-29 20:04:15 +08:00
wangmengyang
3a5249aea9 bugfix that call of esp_a2d_media_ctrl(ESP_A2D_MEDIA_CTRL_SUSPEND) will not get an ACK from callback on A2DP sink 2019-10-29 10:14:19 +00:00
baohongde
28c19e623f components/bt: Disable BR/EDR GATT 2019-10-29 10:10:52 +00:00
Tian Hao
cabe66195c fix bug that semaphore may schedule out in Critical Section
1. Since BLE full-scan feature for BLE mesh change the controller code cause this problem,
it cause coex semaphore take in "interrupt disable", then it may cause task schedule
and cause crash in freertos
2. Fix newlib lock ISR context and critical section check
3. Fix bt controller ISR context and critical section check
2019-10-29 14:43:00 +08:00
Prasad Alatkar
3545b58986 NimBLE: Port NimBLE stack to IDF Release v3.3 (Backport v3.3)
Includes all the latest NimBLE stack changes from idf-v4.0 with few idf-v3.3
specific modifications.
- Addition of nimble component as submodule (`nimble-1.1.0-idf-v3.3`), contains
  IDF v3.3 specific minor changes.
- Example applications are identical to idf-v4.0
- Modification in `bt/Kconfig` to accommodate NimBLE as a BT host.
2019-10-18 13:23:24 +08:00
Jiang Jiang Jian
46b12a560a Merge branch 'bugfix/btdm_backports_v3.3_0903' into 'release/v3.3'
Bugfix/btdm backports v3.3 0903

See merge request espressif/esp-idf!5983
2019-09-29 16:19:22 +08:00
Prasad Alatkar
9c87165bc8 BT/Bluedroid : Add support to set min encryption key requirement (Backport v3.3)
- Backport(v3.3) of IDF MR!6122
- Modifies `smp_utils.c` to add check on encryption key size received from
  peer.
- Modifies `esp_ble_gap_set_security_param` API to add minimum encryption key
  size requirement.
2019-09-29 16:06:27 +08:00
baohongde
285925a43b components:bt: backports release/v3.3 0903
Remove xtensa/xruntime.h
Fix sending Lmp_feature_req_ext in a loop
Fix 2 bugs in r_ld_fm_sket_isr
fix data loss and send same pkt twice sometimes
fix adv data error in air sometimes
fix adv start/stop crash sometimes
Fix connect fail with some speakers
clear BT/BLE interruots after controller disable
add sco_data_path to be set in sdkconfig and do not reset the value upon HCI reset command
2019-09-23 18:02:28 +08:00
wangmengyang
9e51598ee7 component/bt: fix some performance issues in A2DP source data flow control
1. modify the limit of frames to send to avoid dropping packet on A2DP source due to TX data queue overflow
2. reduce the A2DP source data queue size in order to achieve faster control respnonse
2019-09-20 11:52:46 +00:00
Jiang Jiang Jian
39ac9cb44b Merge branch 'bugfix/btdm_fix_hci_enhance_conn_complete_evt_unpack_error_v3.3' into 'release/v3.3'
component/bt: fix unpack hci enhance connection complete event error(backport v3.3)

See merge request espressif/esp-idf!5281
2019-09-08 23:11:18 +08:00
Jiang Jiang Jian
38e2d3bec6 Merge branch 'bugfix/btdm_mem_leak_v3.3' into 'release/v3.3'
components/bt: Fix memory leak about rfcomm

See merge request espressif/esp-idf!5622
2019-09-08 23:09:24 +08:00
wangmengyang
0ce9d2662d add missing source files to CMakeLists for HFP 2019-09-03 11:51:16 +08:00
wangmengyang
3becdd7850 components/bt: set the minimum encryption key size to be 7 octects for BR/EDR link for preventing KNOB attack
This patch is to address the CVE-2019-9506 vulnerability.
2019-08-28 08:13:30 +00:00
Tian Hao
3ca82d5923 bugfix btdm sleep twice after wakeup request
This problem may cause HCI send command timeout.

When host call VHCI api to do btdm_wakeup_request, then controller
wakeup process will be handled in ISR and controller task context.
As host task priority is lower than controller task and ISR,
it will cause an incorrect behavior that before VHCI take the
rx_flow_on_semaphore, controller sleep again, then VHCI cannot take
the semaphore and has to wait the automatic wakeup.
2019-07-27 18:07:20 +08:00
baohongde
b9f2531e8c components/bt: Fix memory leak about rfcomm 2019-07-25 16:51:40 +08:00
zhiweijian
62e359a4e1 component/bt: fix rxwinsz assert in ble and wifi coex 2019-07-04 20:12:04 +08:00
zhiweijian
0e022b7db9 component/bt: fix unpack hci enhance connection complete event error 2019-06-24 03:23:59 +00:00
Jiang Jiang Jian
f60acb2196 Merge branch 'feature/btdm_add_ble_link_timeout_config_v3.3' into 'release/v3.3'
Component/bt: add ble link timeout config in menuconfig(backport v3.3)

See merge request idf/esp-idf!4825
2019-06-19 14:47:31 +08:00
baohongde
2ee0f98d05 components/bt: Fix assert due to alloc LMP TX buffer failed 2019-06-12 19:49:28 +08:00
baohongde
39dbe7daa8 components/bt: Fix abort if call esp_spp_deinit without calling esp_spp_init 2019-04-24 11:30:04 +08:00
zhiweijian
3295ed0995 Component/bt: add ble link timeout config in menuconfig
- add ble link timeout config in menuconfig
- disable background connection when call gatts_open
2019-04-22 21:49:59 +08:00
zhiweijian
b8a2b77f70 component/bt: fix memory leak when settig tx power 2019-04-14 06:25:53 +00:00
Jiang Jiang Jian
a218d4b925 Merge branch 'bugfix/btdm_fix_warning_when_disable_logs_v3.3' into 'release/v3.3'
components/bt: Fix warning when disable debug logs or in release mode and improve the code structure

See merge request idf/esp-idf!4619
2019-04-04 18:45:31 +08:00
baohongde
bbfe9f4efa components/bt: Fix disconnect with apple device(backport 3.3)
1. Fix disconnect with apple device
        2. Fix hci_refresh_enc_key_cmd will be ignored
        3. Fix hci_refresh_enc_key_cmd will crash
2019-04-03 17:24:52 +08:00
Jiang Jiang Jian
f03382b0ff Merge branch 'feature/btdm_add_mesh_adv_type_and_srv_uuid_for_dup_scan_except_v3.3' into 'release/v3.3'
Component/bt: add mesh beacon adv and svc uuid for duplicate scan exceptional list (backport v3.3)

See merge request idf/esp-idf!4605
2019-04-01 21:49:29 +08:00
zhiweijian
826146e985 Component/bt: add mesh beacon adv and svc uuid for duplicate scan exceptional list 2019-03-28 11:13:30 +08:00
baohongde
dca83700f2 components/bt: Fix warning when disable debug logs or in release mode and improve the code structure 2019-03-26 14:46:36 +08:00
zhiweijian
88fe438524 Component/bt: modify HCI_GET_CMD_BUF 2019-03-22 14:59:11 +08:00
Jiang Jiang Jian
6505f82a80 Merge branch 'bugfix/btdm_fix_no_adv_report_when_scaning_with_sleep_enable_v3.3' into 'release/v3.3'
Component/bt: fix no adv report when scaning with sleep enable (backport v3.3)

See merge request idf/esp-idf!4536
2019-03-20 21:40:28 +08:00
Jiang Jiang Jian
c05a0ae6c3 Merge branch 'bugfix/btdm_fix_build_warning_when_bluedroid_disable_log_v3.3' into 'release/v3.3'
Component/bt: fix build warning when bluedroid disable log (backport V3.3)

See merge request idf/esp-idf!4565
2019-03-20 21:22:33 +08:00
zhiweijian
3ed0f8e113 Component/bt: fix build warning when bluedroid disable log 2019-03-20 15:02:57 +08:00
zhiweijian
7e1ccb56a7 Component/bt: fix blufi prepare write crash 2019-03-20 14:23:11 +08:00
zhiweijian
7a530be302 Component/bt: fix no adv report when scaning with sleep enable 2019-03-18 17:09:00 +08:00
Tian Hao
f330bb50b2 fix the bug assert(8192 0) in rwble.c 234 2019-03-14 11:43:16 +08:00