Commit graph

169 commits

Author SHA1 Message Date
Konstantin Kondrashov
9ad0760b9d esp32/clk:Fix starting rtc oscillator if it is bad
If the RTC crystal is bad or has no matched capacitance, then you do not need to start such the crystal. It is necessary to determine this case, output an error (about impossibility to start from the oscillator) and start from the internal RC of the chain.

Reduced the default value of the number of bootstrap cycles. Because we can oscillating the oscillator which then stops. (in Kconfig). Changed from 100 to 5.

The number of calibration cycles has been increased. It is the main criterion for estimating the launch of an oscillator. A large increase leads to an increase in the load time, as well as the stability of recognition of this case. (in Kconfig).
Changed from 1024 to 3000.
2018-05-15 08:59:15 +05:00
Tian Hao
8cd9deed5c component/esp32 : improve wifi and bluetooth coexistence performance
1. update coexistence and wifi libraries. Coexist version update to
v0.9.2
2. Cancel the restriction of use AMPDU when SW_COEXIST_ENABLE is y.
2018-05-07 19:55:41 +08:00
Liu Zhi Fu
ed46976f41 esp32/bt/driver: support static allocation of FreeRTOS queues used by ISR routine
Support static allocation of FreeRTOS queues used by ISR routine in WiFi/BT/esp_timer/driver etc
2018-04-27 15:02:30 +08:00
island
9b7454de0c support wifi&bt coexist (v0.9.1)
1. refactor wifi modem sleep
2. refactor wifi and bt phy enable/diable coexistence
3. support wifi&bt coexist (v0.9.1)
3. add coex pause resume
4. fix bt library interrupt reaction slowly
5. make a2dp more smooth when coex
6. add coexist preference option
7. Make CI do not check libcoexist.a printf/ets_printf
8. disable Wifi RX AMPDU when software coexistence enable && update wifi lib
9. bluetooth call modem sleep api
2018-04-02 13:44:48 +08:00
Ivan Grokhotkov
2e7613b656 Merge branch 'feature/use_esp_err_to_name' into 'master'
Use esp_err_to_name in examples & optionally disable it in Kconfig

See merge request idf/esp-idf!2013
2018-03-27 11:50:21 +08:00
Konstantin Kondrashov
f7df532ec0 bugfix/rtc_clk_32k_bootstrap: Fix starting 32k RTC
1. External 32kHz crystal is started for too long or it may not start at all. It is often observed at the first start.
2. At the first start, it is possible that the crystal did not start. And the recorded period was recorded as 0. Which led to a division error by zero during the transition to the deep sleep mode (Maybe somewhere else).
3. Added a unit test to test a new method of oscillation an external crystal.
4. Added a new method of oscillating of an external crystal. The legs of the crystal are fed with a 32 kHz frequency.

The new method eliminates these errors.

Added unit test: `\esp-idf\components\soc\esp32\test\test_rtc_clk.c`: `make TEST_COMPONENTS=soc`
- 8 Test starting external RTC crystal. Will pass.

`Bootstrap cycles for external 32kHz crystal` - is specified in the file Kconfig by default 100.

QA tested a new method of oscillation the crystal on 25 boards. The supply of square waves on the crystal showed a 100% result in contrast to the previous method of launching the crystal. After the tests, the old method was deleted.

Closes TW19143
2018-03-21 13:27:56 +05:00
Roland Dobai
f891eac827 ESP32: Optionally disable lookup-tables for esp_err_to_name 2018-03-13 14:26:54 +01:00
Darian Leung
33aee51727 bugfix/remove MEMMAP_SMP config
This commit removes the MEMMAP_SMP config option.
Dependencies on this config will now depend on !FREERTOS_UNICORE
2018-02-27 17:56:44 +08:00
Ivan Grokhotkov
d1559732b0 Merge branch 'feature/ignore_no_psram' into 'master'
Add option to continue running (with less ram) if psram is enabled but not detected

See merge request idf/esp-idf!1911
2018-02-26 20:33:28 +08:00
Mahavir Jain
bf31afd2c3 Kconfig: esp32/freertos: add some missing dependencies
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-02-21 12:31:10 +05:30
Jeroen Domburg
dc864c4108 Add option to continue running (with less ram) if psram is enabled but not detected 2018-02-12 13:44:11 +08:00
Ivan Grokhotkov
a5f9563ef7 esp32: increase default event task stack size by 256 bytes
At debug log level, default event task stack size was not sufficient,
the stack was overflown by 232 bytes when WiFi connection happened.
2018-02-11 13:06:01 +08:00
Jack
11c0daef62 Fix bug that when we do full calibration init data bin is not used 2018-01-09 15:31:34 +08:00
Angus Gratton
c69af42b96 esp32: Fix backwards compatibility for pre-v2.1 bootloaders
Older bootloaders don't set RTC_XTAL_FREQ_REG or call rtc_clk_init(),
app needs to pick this up.

Reported at
https://esp32.com/viewtopic.php?f=2&t=3939&p=17836
2017-12-18 13:45:57 +11:00
Ivan Grokhotkov
bee1afaf6d time: rename time source option from FRC to "high-resolution timer"
libc time function now rely on esp_timer_get_time as the source of
high-resolution time, rather than FRC1 timer. Internally, on the ESP32
esp_timer implementation uses FRC2 timer.

- Change help text and labels in Kconfig to use "high-resolution timer"
  instead of FRC1. Keep existing Kconfig option name to be backwards
  compatible.
- Change references to "FRC1" in the source code to "FRC".
2017-12-11 12:37:08 +08:00
Ivan Grokhotkov
f58c5b21ec watchdog: increase default INT WDT interval if SPIRAM is used
Running heap_caps_check_integrity for 4MB of PSRAM can take longer than
the default WDT interval, 300ms.
2017-12-01 20:10:26 +08:00
Ivan Grokhotkov
f0547d58e4 esp_timer: add documentation, expose profiling option in Kconfig 2017-11-29 11:44:46 +08:00
Liu Zhi Fu
3f6a8f1430 esp32: add options to disable/enable TX/RX AMPDU independently
Make menuconfig can disable/enable TX/RX AMPDU independently
2017-11-23 09:42:31 +08:00
Darian Leung
91ccf588d1 esp32/Update brownout voltages
This commit updates the voltages of each brownout level in Kconfig.
Note that there is some variation of brownout voltage between each chip.
2017-11-20 12:26:13 +08:00
Liu Zhi Fu
710055025e esp32/lwip: adjust task stack size according 'nano' print
1. Adjust tcpip/main/event/timer task stack size according 'nano' print
2. If 'nano' print is disabled the task stack size reduces 512 bytes
2017-11-09 10:09:42 +08:00
Darian Leung
9d63e1da4a New Task Watchdog API (Revert of Revert)
This commit reverts the revert on the new task watchdog API. It also
fixes the following bug which caused the reversion.

- sdkconfig TASK_WDT_TIMEOUT_S has been reverted from the unit of ms back to the
unit of seconds. Fixes bug where projects using the new API without rebuilding sdkconfig
would cause the old default value of 5 to be interpreted in ms.

This commit also adds the following features to the task watchdog

- Updated idle hook registration to be compatible with dual core hooks

- Updated dual core hooks to support deregistration for cpu

- Legacy mode has been removed and esp_task_wdt_feed() is now replaced by
  esp_task_wdt_reset().  esp_task_wdt_feed() is deprecated

- Idle hooks to reset are now registered/deregistered when the idle tasks are
  added/deleted from the Task Watchdog instead of at Task Watchdog init/deinit

- Updated example
2017-11-02 16:47:51 +08:00
XiaXiaotian
50b6912bf8 Increase maximum number of WiFi dynamic transmitting buffer 2017-10-31 15:18:20 +08:00
Liu Zhi Fu
1195ced75c esp32: reduce default wifi static tx buffer
Modify the the default WiFi static tx buffer from 32 to 16
2017-10-28 12:15:40 +08:00
Ivan Grokhotkov
eb0c34e5c9 esp_timer: add support for frequency scaling 2017-10-18 14:19:18 +08:00
Ivan Grokhotkov
42d51a4224 esp32: initialize PM at startup, add Kconfig options 2017-10-18 14:19:17 +08:00
XiaXiaotian
c730f676c3 Reduce minimum number of WiFi static tx buffer
Calibrate tx power after sending five packets
2017-10-13 17:11:31 +08:00
XiaXiaotian
5df39cd4b6 Allocate some memories in SPIRAM first.
Try to allocate some WiFi and LWIP memories in SPIRAM first. If
    failed, try to allocate in internal RAM then.
2017-10-13 10:11:24 +08:00
Angus Gratton
f3681e22de wifi docs: Clarify WIFI_DYNAMIC_TX_BUFFER_NUM config item limit
Setting WIFI_DYNAMIC_TX_BUFFER_NUM to zero is not possible.

Also edit some of the related config docs a little.
2017-10-12 15:53:53 +11:00
Jeroen Domburg
b6a2bd1184 Revert "esp32: New Task Watchdog API"
This reverts commit 616baa239d.
2017-09-30 18:07:19 +08:00
Darian Leung
616baa239d esp32: New Task Watchdog API
Legacy API of task watchdog used the same function esp_task_wdt_feed() to add
and feed a task. This caused issues of implicitly adding a task to the wdt list
if the function was used in shared code.

The new API introduces init, adding, feeding, deleting, deinit functions. Tasks
must now be explicitly added to the task watchdog using their handles. Deletion
must also be explicit using task handles. This resolves the issue of implicit
task additions to the task watchdog due to shared code calling
esp_task_wdt_feed().

Task watchdog is now fully configurable at runtime by calling the init and
deinit functions.

Also added functions to get the handles of idle tasks of the other core. This
helps when adding idle tasks to the watchdog at run time.

Configuring the task watchdog using menu config is still available, however
menu config will only result in calling the init and add functions for idle
tasks shortly after the scheduler starts.

Menu config also allows for using legacy behavior, however the legacy behavior
willcall the new API functions but with slight variations to make them legacy
compatible.

Documentation and example have also been updated

gcov_rtio.c headers updated to prevent error of freertos header files being
included in the wrong order.

Resolves issue TW#13265
2017-09-29 23:10:55 +08:00
Jeroen Domburg
740f8a79f0 Add logic to make external RAM usable with malloc() 2017-09-28 17:17:50 +08:00
Jeroen Domburg
875ae6a134 Add option to allocate external RAM using heap_alloc_caps 2017-09-14 10:47:44 +08:00
Deomid Ryabkov
9903ea1c11 Add --warn-undefined-variables to MAKEFLAGS
Fix warnings where undefined vars are used.

Make Kconfig emit "FOO=" for unset bool options
To ensure make variables are always defined, even if empty.

When writing auto.conf, include symbols disabled by dependency to make sure all make variables are always defined.

Fixes espressif/esp-idf#137

Cherry-picked from https://github.com/espressif/esp-idf/pull/138
2017-09-05 16:10:46 +10:00
Jeroen Domburg
34372a091c Add initial SPI RAM support. This adds support for an ESP-PSRAM32 chip connected to the default flash pins and GPIO 16 and 17. The RAM is mapped to address 0x3F800000, but otherwise ignored by esp-idf as of yet. 2017-09-04 12:05:49 +08:00
Angus Gratton
1e22bcdfde esp32: Add KConfig option to disable ROM Console fallback on first boot 2017-08-29 14:52:00 +10:00
Ivan Grokhotkov
82763a02af Merge branch 'feature/ets_timer' into 'master'
esp_timer: add high-resolution timer api

See merge request !1090
2017-08-28 16:38:11 +08:00
Ivan Grokhotkov
857a29872d esp_timer: add high resolution software timer API 2017-08-28 11:35:26 +08:00
Wu Jian Gang
791daea835 Merge branch 'bugfix/xtal_freq_40' into 'master'
esp32: by default, set 40MHz crystal frequency

See merge request !1140
2017-08-24 20:40:22 +08:00
Tian Hao
08221589fc component/esp32 : move Phy outof Wifi section
1. move Phy out of Wifi section
2. lowercase the Ethernet and Phy from 2nd letter.
2017-08-23 17:51:31 +08:00
Ivan Grokhotkov
9a8c0392f5 esp32: by default, set 40MHz crystal frequency 2017-08-23 16:33:26 +08:00
Ivan Grokhotkov
fb43948413 Update several Kconfig files to make help texts compatible with ReST 2017-08-22 14:34:19 +08:00
Ivan Grokhotkov
489c523870 vfs: support for blocking reads, more newline conversion options
Previously VFS driver for UART could only use simple non-blocking
functions to read from and write to the UART. UART driver provides more
complex blocking and interrupt-driven functions, which can be used
instead.
This commit adds optional support for using UART driver's functions.

Also added is a more flexible mechanism for configuring newline
conversion rules on input and output.

This commit also fixes a bug that all UARTs shared one static variable
used as a character buffer in newline conversion code. This variable is
changed to be per-UART.
2017-08-21 15:58:28 +08:00
Kedar Sovani
6405d6f874 kconfig: Add an option for skipping binary blobs 2017-08-16 15:55:42 +05:30
Kedar Sovani
ba8cd58b08 kconfig: Remove Wi-Fi on/off as a menuconfig option
This is no longer required since the functions automatically get
pulled in based on the usage. A quick summary of footprint
comparisions before and after these set of patches is shown below:

Hello-World: (simplified for readability)
 old Total image size:~ 104902 bytes (.bin may be padded larger)
 old Total image size:~ 105254 bytes (.bin may be padded larger)
 Per-archive contributions to ELF file:
             Archive File DRAM .data & .bss   IRAM Flash code & rodata   Total
 old              libesp32.a       1973    177   4445       3939     2267   12801
 new              libesp32.a       1973    185   4473       3939     2267   12837

 new             libnvs_flash.a          0     92      0        274        8     374
 new             libstdc++.a          0      0      0         24        0      24

For some reason, nvs_flash.a (~400bytes) gets pulled in (particularly
the nvs_flash_init() function).

Power-Save: (simplified for readability)
 old Total image size:~ 421347 bytes (.bin may be padded larger)
 old Total image size:~ 421235 bytes (.bin may be padded larger)

 old      libtcpip_adapter.a          0     81      0       1947      115       2143
 new      libtcpip_adapter.a          0     69      0       1897      115       2081

The size actually shrinks a bit, since the AP interface function
doesn't get pulled in.
2017-08-16 15:55:28 +05:30
Liu Zhi Fu
c99c5d13e6 esp32: add menuconfig options to configure BA window
Make AMPDU Block Ack Window configurable in menuconfig because we need to configure it
in some special cases, such as iperf test etc
2017-07-25 13:11:38 +08:00
Ivan Grokhotkov
01b185977c brownout detector: enable by default
Because of errata related to BOD reset function, brownout is handled as follows:

- attach an ISR to brownout interrupt
- when ISR happens, print a message and do a software restart
- esp_restart_nonos enables RTC watchdog, so if restart fails,
  there will be  one more attempt to restart (using the RTC
  watchdog)
2017-07-10 17:25:55 +08:00
Angus Gratton
9297edaf60 ipc task: Allow configuration of IPC task stack size
Fixes regression in 3fe0022ef
2017-06-30 15:04:19 +10:00
Alexey Gerenkov
8d43859b6a esp32: SEGGER SystemView Tracing Support
Implements support for system level traces compatible with SEGGER
SystemView tool on top of ESP32 application tracing module.
That kind of traces can help to analyse program's behaviour.
SystemView can show timeline of tasks/ISRs execution, context switches,
statistics related to the CPUs' load distribution etc.

Also this commit adds useful feature to ESP32 application tracing module:
 - Trace data buffering is implemented to handle temporary peaks of events load
2017-06-27 20:52:43 +03:00
Ivan Grokhotkov
3c583a7655 sdkconfig: set CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000 by default
To increase the chances that the examples work out of the box, this
change is raising the default deep sleep wakeup delay to 1ms.
If GPIO15 is low at startup, ROM code takes less time to execute
(because no logging is performed), so more time may be needed to allow
flash chip to become ready.
2017-05-25 10:51:39 +08:00
Ivan Grokhotkov
67b08c20ec Merge branch 'bugfix/update_wifi_lib_for_some_bugs' into 'master'
esp32: update wifi lib for some bugfix

1. Fix wifi ebuf free twice issue
2. Fix wifi internal assert issue
3. Fix a bug in esp_wifi_stop
4. Fix wifi crash issue
5. Fix wifi run out of memory when 10 udp connection stability test

See merge request !745
2017-05-11 12:02:50 +08:00
Liu Zhi Fu
4235b4c13e esp32: update wifi lib for some bugfix
1. Fix wifi ebuf free twice issue
2. Fix wifi internal assert issue
3. Fix a bug in esp_wifi_stop
4. Fix wifi crash issue
5. Fix 10 UDP connection test out of memory issue
2017-05-11 11:30:08 +08:00
XiaXiaotian
b22067a8f0 Optimize configuration of base MAC address
Application developer can call APIs to configure base MAC address
    instead of using menuconfig.
2017-05-10 10:15:07 +08:00
Ivan Grokhotkov
6353bc40d7 Add support for 32k XTAL as RTC_SLOW_CLK source
- RTC_CNTL_SLOWCLK_FREQ define is removed; rtc_clk_slow_freq_get_hz
  function can be used instead to get an approximate RTC_SLOW_CLK
  frequency

- Clock calibration is performed at startup. The value is saved and used
  for timekeeping and when entering deep sleep.

- When using the 32k XTAL, startup code will wait for the oscillator to
  start up. This can be possibly optimized by starting a separate task
  to wait for oscillator startup, and performing clock switch in that
  task.

- Fix a bug that 32k XTAL would be disabled in rtc_clk_init.

- Fix a rounding error in rtc_clk_cal, which caused systematic frequency
  error.

- Fix an overflow bug which caused rtc_clk_cal to timeout early if the
  slow_clk_cycles argument would exceed certain value

- Improve 32k XTAL oscillator startup time by introducing bootstrapping
  code, which uses internal pullup/pulldown resistors on 32K_N/32K_P
  pins to set better initial conditions for the oscillator.
2017-04-26 12:43:22 +08:00
Ivan Grokhotkov
8131c77860 Merge branch 'feature/xtal_freq_autodetect' into 'master'
XTAL frequency detection, support for selecting XTAL frequency

This MR adds more robust XTAL frequency detection code (which gets run in the bootloader) and an option to set XTAL frequency in Kconfig. By default we still use autodetection, since it is more reliable than the one used in ROM code.

This will help with issues about XTAL frequency detection in high ambient temperature conditions.

Ref TW12008

See merge request !694
2017-04-25 16:30:36 +08:00
Jiang Jiang Jian
3f4e917ad6 Merge branch 'feature/ppp_over_serial' into 'master'
Enable experimental/unsupported PPP over Serial driver

From PR #272 https://github.com/espressif/esp-idf/pull/272

See merge request !690
2017-04-25 14:02:55 +08:00
Ivan Grokhotkov
6b237de909 Add XTAL frequency selection to Kconfig
This change allows XTAL frequency to be selected using menuconfig
2017-04-24 15:55:02 +08:00
Jiang Jiang Jian
29002a1c83 Merge branch 'feature/add_limit_for_all_dynamic_ebuf' into 'master'
esp32: update wifi lib for limitting dynamic wifi buffer

Add limit for all dynamic wifi ebuf to avoid wifi run out of memory in some extreme scanrio. 
The default max allocated dynamic tx buffer is 32
The default max allocated dynamic rx buffer is 64, make default value is bigger because when all packets we received are small packets, e.g. the length is 64Bytes, then 64K can hold 1000 packets, so 64 maybe a good candidate default value, anyway the customer can configure it via menuconfig.
The default dynamic wifi internal long/long-long mgmt is 32, generally 32 is enough for mgmt packet (beacon/auth/assoc/probe/null etc). Generally when all the 32 mgmt buffer is run out of memory, it means internal wifi state machine may has problem, we need to debug it.

See merge request !683
2017-04-24 11:49:50 +08:00
Jiang Jiang Jian
97142bb8db Merge branch 'feature/support_read_mac_addr_from_customer_efuse' into 'master'
Add customer MAC address that read from efuse



See merge request !673
2017-04-24 11:30:55 +08:00
XiaXiaotian
5553fbd537 add base MAC address storage choice.
Base MAC address can be stored in default manufacture-defined or customer
    pre-defined place in EFUSE and other place e.g. flash or EEPROM.
    If choose to use base MAC address which is stored in other place, please
    call esp_base_mac_addr_set_external() before initializing WiFi/BT/Ehternet.
2017-04-21 14:55:11 +08:00
Angus Gratton
f3a567b65d PPPoS: Rearrange config items (move TCP/IP stack size to LWIP), mark as experimental/unsupported
Ref #272
2017-04-21 14:23:34 +10:00
Adrian Muzyka
47c722d674 Enable lwip PPPoS support
* Fix some lwip api bugs
 * Added PPP_SUPPORT parameter to lwip Kconfig
 * Added example pppos_client

Merges #272 https://github.com/espressif/esp-idf/pull/272
2017-04-21 14:23:34 +10:00
Liu Zhi Fu
561a1a64f2 esp32: update wifi lib for limitting dynamic wifi buffer
Add limit for all dynamic wifi ebuf to avoid wifi run out of memory in some extreme scanrio
2017-04-21 10:38:00 +08:00
Alexey Gerenkov
55f1a63faf esp32: Adds functionality for application tracing over JTAG
- Implements application tracing module which allows to send arbitrary
   data to host over JTAG. This feature is useful for analyzing
   program modules behavior, dumping run-time application data etc.
 - Implements printf-like logging functions on top of apptrace module.
   This feature is a kind of semihosted printf functionality with lower
   overhead and impact on system behaviour as compared to standard printf.
2017-04-17 23:26:29 +03:00
Ivan Grokhotkov
639557d975 trace: add Kconfig options for app level trace
CONFIG_MEMMAP_TRACEMEM is now a hidden underlying option, which can be enabled using either CONFIG_ESP32_TRAX or CONFIG_ESP32_APP_TRACE
2017-04-17 22:19:14 +03:00
XiaXiaotian
03e2618d35 Add customer MAC address that read from efuse 2017-04-17 21:24:15 +08:00
Ivan Grokhotkov
7ee8ee8b7e soc: add source code of rtc_clk, rtc_pm 2017-04-11 15:45:54 +08:00
XiaXiaotian
4f89cc73e6 Add WiFi static and dynamic tx buffer choice
If static tx buffer is selected, WiFi tx buffers are allocated when WiFi is initialized and released

    when WiFi is de-initialized. If dynamic tx buffer is selected, WiFi tx buffer is allocated when tx

    data is delivered from LWIP to WiFi and released when tx data is sent out by WiFi.

    The size of each static tx buffers is fixed to about 1.6KB and the size of dynamic tx buffers is

    depend on the length of the data delivered from LWIP.

    If PSRAM is enabled, "STATIC" should be selected to guarantee enough WiFi tx buffers.

    If PSRAM is disabled, "DYNAMIC" should be selected to improve the utilization of RAM.
2017-03-30 21:25:44 +08:00
Liu Zhi Fu
abdd8feebb esp32: menuconfig adds some WiFi options
1. Add options to enable/disable AMPDU
2. Add options to enable/disable WIFI NVS
3. Add options to configure WiFi RX/TX buffer number
2017-03-02 18:13:49 +08:00
XiaXiaotian
d3eede2110 mac address: add the number of MAC address generated from efuse for user to choose
1. Add the number of MAC address generated from efuse for user to choose.

2. Add MAC address derive method.
2017-03-02 15:54:35 +08:00
XiaXiaotian
23f933a78d mac address: add user set mac address
add menuconfig for user to set mac address of wifi, bt and ethernet.
2017-03-01 20:42:46 +08:00
XiaXiaotian
770c2ade05 phy init: modify some comments 2017-02-20 10:44:40 +08:00
XiaXiaotian
cd13c9e95d disable phy and rf
1. add a macro in menuconfig for users to choose whether store phy calibration data into NVS or not.

2. rename some disable phy and rf APIs so that existing code which calls old APIS will fail to compile.
2017-02-17 10:24:55 +08:00
XiaXiaotian
eb14284c92 disable PHY and RF when stop WiFi and disable BT
1. Add disable PHY and RF when WiFi and BT are both disabled(including call sniffer disable API).

2. Do not init PHY and RF when cpu start. Init PHY and RF when call Wifi or BT start APIs(including sniffer enable API).

3. Add a temporary lib: librtc_clk.a and will delete it when CPU frequency switching function is done.

4. Add an function to get OS tick rate.

5. Do not put the whole pp.a in iram0, only put lmac.o, ieee80211_misc.o, ets_time.o and wdev.o in iram0.
2017-02-17 10:24:54 +08:00
Liu Zhi Fu
7093c59a74 esp32: update wifi lib for some fixes and optimizations
1. Reduce the default static rx buffer size from 25 to 10
2. Adjust ampdu interrupt size to 3, namely, raise 1 interrupt per 3-mpdu
3. Make a copy for all received packets, including AMSDU/AMPDU/MPDU
4. Fix softap mis-forward issue
5. Fix pp q full issue
6. Fix sniffer copy wrong content issue
2017-02-10 10:28:03 +08:00
Ivan Grokhotkov
b1df4c47f9 kconfig: define ESP32_PHY_MAX_TX_POWER if PHY_ENABLED
ESP32_PHY_MAX_TX_POWER option is only meaningful for WiFi, so previous
change made it depend on WIFI_ENABLED. However if WiFi is not enabled,
but BT is, this option becomes undefined which breaks phy_init_data
generation.

This change turns ESP32_PHY_MAX_TX_POWER into a hidden parameter, which
depends on PHY_ENABLED. New user-visible parameter,
ESP32_PHY_MAX_WIFI_TX_POWER is introduced which depends on WIFI_ENABLED
and is used as default value for ESP32_PHY_MAX_TX_POWER if WIFI_ENABLED
is set. Otherwise ESP32_PHY_MAX_WIFI_TX_POWER is set to 20.
2017-01-19 10:58:09 +08:00
Tian Hao
97e3c0fec4 kconfig: move PHY-related settings into new menu
- PHY options must be shown when either WIFI or BT is enabled.

- Add clarification that TX power option applies to WiFi only.
2017-01-19 00:30:20 +08:00
shangke
53b0b03e63 esp_event: event stack overflow 2017-01-16 17:06:12 +08:00
Ivan Grokhotkov
0d00a1ba01 vfs: implement reading from UART 2017-01-16 11:33:32 +08:00
Ivan Grokhotkov
ca9f62ad77 Merge branch 'feature/esp32_core_dump' into 'master'
esp32 core dump to flash

1.  menuconfig option to select where to store core dump: flash, uart or disable
2. Saving of core dump to flash
3. Partition table definitions files with core dump partition
4. Python scripts to support core dump generation from GDB command line

See merge request !341
2017-01-13 11:51:40 +08:00
Alexey Gerenkov
ad66fbe5ad esp32: Fixes issues discussed during code review of MR!341
The following issues mentioned during MR!341 review were fixed:
1) Core dump test application description
2) Usage of CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH and CONFIG_ESP32_ENABLE_COREDUMP_TO_UART
3) FLASH_GUARD_START macro usage is fixed in flash API
4) Core dump module logging facility
5) cache util functions doc updated
6) interactive delay before print core dump to uart
7) core dump partion support in build system
2017-01-12 19:38:19 +03:00
Ivan Grokhotkov
b24ac487cb newlib: use RTC_STORE registers to keep boot time instead of RTC_SLOW_MEM
This allows RTC_SLOW_MEM to be powered down in deep sleep if no other variables are placed into RTC_SLOW_MEM.
2017-01-12 14:43:34 +08:00
Alexey Gerenkov
4a3e160888 esp32: Add core dump saving to flash feature
Complimentary changes:
1) Partition table definitions files with core dump partition
2) Special sub-type for core dump partition
3) Special version of spi_flash_xxx
4) espcoredump.py is script to get core dump from flash and print useful info
5) FreeRTOS API was extended to get tasks snapshots
2017-01-11 20:51:28 +03:00
Angus Gratton
26d1a23308 config: Move WiFi & BT toggles to Components menu, same as Ethernet 2017-01-10 16:39:43 +11:00
Angus Gratton
2e78b397bc config: Simplify WiFi & Bluetooth config options
Removes redundant menu options, splits WiFi configuration out from
generic ESP32 configuration.
2017-01-10 16:04:04 +11:00
Angus Gratton
433ff1474e WiFi software coexistence: Clarify KConfig description
Ref http://esp32.com/viewtopic.php?f=13&t=844&p=3576
2017-01-10 11:11:27 +11:00
XiaXiaotian
7853893731 wifi: add wifi rx buffer number config in menuconfig 2017-01-06 10:12:27 +08:00
Ivan Grokhotkov
eac80b0651 deep sleep: add option to delay CPU startup
When ESP32 wakes up from deep sleep, flash is accessed an approximately 900us after power on.
Some flash chips need more time to become ready. This change adds a menuconfig option to add
some delay to the default deep sleep wake stub.

Fixes https://github.com/espressif/esp-idf/issues/117
2016-12-16 14:30:27 +08:00
Ivan Grokhotkov
221dc13535 newlib: add "full" formatting support, add missing functions
- add two versions of libc: libc.a and libc_nano.a. First one has full C99 formatting support, second one uses “nano” formatting functions available in ROM.
- fix linker error for fmod, fmodf, atof, atoff
- update tests
2016-12-08 11:04:54 +08:00
Ivan Grokhotkov
b3f6cd08db support for console redirection to other UART
This change adds a set of menuconfig options to set custom UART#, baud rate, and pins, for console output.
Setting happens in bootloader startup code for PRO CPU, and in application startup code for APP CPU.
Ref. TW8146
2016-12-08 01:42:37 +08:00
Tian Hao
55e0690f69 component/bt : wifi/bt software coexist option
1. option of sw coexist
2. cpu set freq function modify
3. update lib
4. ld add static data address
2016-11-24 19:57:47 +08:00
Tian Hao
7a41ab6982 Merge branch 'master' into feature/btdm_bluedroid
1. update bt lib submodule

# Conflicts:
#	components/bootloader/src/main/esp32.bootloader.ld
#	components/bt/component.mk
#	components/esp32/component.mk
#	components/esp32/lib
2016-11-24 15:45:04 +08:00
Ivan Grokhotkov
541b142654 phy_init: reduce the amount of hardwired logic, add coexist init 2016-11-18 20:11:17 +08:00
Ivan Grokhotkov
4db29f74a0 add PHY init support 2016-11-18 20:11:16 +08:00
Ivan Grokhotkov
299655e3be esp32: add choice for RTC clock source
For now only one option is supported: internal RC oscillator
2016-11-03 17:37:15 +08:00
Ivan Grokhotkov
eb2c633cbf newlib: implement settimeofday, integrate LwIP SNTP, add SNTP example 2016-11-03 12:46:46 +08:00
Ivan Grokhotkov
c534dedf2d newlib: implement time syscalls 2016-11-02 17:31:35 +08:00
Tian Hao
d472ff5856 Merge branch 'master' into feature/btdm_bluedroid
1.update esptool submodule
2.new esp32 lib and new phy lib
3.new bt lib
4.soc.h add comment
2016-11-01 17:53:59 +08:00
Ivan Grokhotkov
5ffd6155f2 set default interrupt watchdog timeout to 300ms
10ms is too low for openocd/gdb to work, so it's not a very useful default value.
2016-10-28 16:17:41 +08:00
Jeroen Domburg
4d8ad3c877 Fix int wdt iram, fix some fallout of moving panic stuff to esp32 2016-10-28 12:05:42 +08:00
Jeroen Domburg
7d254eb3f0 Move panic handler and gdbstub into esp32 component, clean up wdt according to merge req suggestions 2016-10-26 12:23:01 +08:00