Commit graph

13 commits

Author SHA1 Message Date
wangmengyang
1c4bbaa567 component/bt: bugfix of bluetooth modem sleep not being able to work with Dynamic Frequency Scaling
1. start an esp_timer on entering sleep to acquire pm_lock before wake up from modem sleep
2. decrease the clock division of XTAL fed to bluetooth low power clock from 32us to 2us period to allow to work under 240MHz Max CPU frequency
3. decrease the minimum sleep duration threshold to allow shorter bluetooth modem sleep period, especially for BLE with short connection interval
4. reconfigure bluetooth baseband(BT-BB) settings after PHY/RF init upon waking up from modem sleep to avoid packet RX/TX performance degradation
2018-12-14 21:21:22 +08:00
Tian Hao
3ad712ba86 esp32: fix coex bug
1. fix BLE connection missing in coex mode
    2. modify other parameters to make coex priority more reasonable
    3. fix modem sleep procedure trap cause Wifi disable RF when BT is
    working. Such cause that BR/EDR is difficult to be connected, BLE
    connection stability decrease and so on.
    4. modify BR/EDR coexist duration to imrove BR/EDR connect success
    ratio.
    5. Due to the hardware coexist bug, BLE scan interval/window should
    be less than 0x100(about 160ms). Therefore, it will cause BLE cannot
    scan any advertising packet while WiFi have higher priority
    behaviour(such like RX beacon, scan, TX/RX VO packets and etc.).
2018-06-30 22:40:09 +08:00
XiaXiaotian
7634d9a991 support WiFi null mode again 2018-06-21 21:45:57 +08:00
Liu Zhi Fu
67424816cc esp32: some changes relating to phy v3900
1. Store the calibration data to NVS if PHY does full calibration because of calibration data checksum failure
2. Pass the station's mac to PHY for checksum calculation
2018-05-22 14:16:09 +08:00
island
9b7454de0c support wifi&bt coexist (v0.9.1)
1. refactor wifi modem sleep
2. refactor wifi and bt phy enable/diable coexistence
3. support wifi&bt coexist (v0.9.1)
3. add coex pause resume
4. fix bt library interrupt reaction slowly
5. make a2dp more smooth when coex
6. add coexist preference option
7. Make CI do not check libcoexist.a printf/ets_printf
8. disable Wifi RX AMPDU when software coexistence enable && update wifi lib
9. bluetooth call modem sleep api
2018-04-02 13:44:48 +08:00
Ivan Grokhotkov
fdc24eb118 phy init: remove descriptions of PHY init parameters 2017-10-09 14:40:08 +08:00
XiaXiaotian
6181c39f05 Reset WIFI mac when wifi start and update wifi lib
1. reset wifi mac when wifi start

2. roll back rx hung workaround for beacon timeout

3. fix amsdu ap interface wrong issue

4. fix amsdu header parse error

5. fix amsdu flag wrong issue

6. PHY: V350, fix BT rssi bug

7. RTC: V225, fix bt will be not work when wifi is reset
2017-03-23 14:28:27 +08:00
XiaXiaotian
8f3d1d3184 fix compile error that if enable CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION compile fail 2017-02-17 15:29:11 +08:00
XiaXiaotian
cd13c9e95d disable phy and rf
1. add a macro in menuconfig for users to choose whether store phy calibration data into NVS or not.

2. rename some disable phy and rf APIs so that existing code which calls old APIS will fail to compile.
2017-02-17 10:24:55 +08:00
XiaXiaotian
eb14284c92 disable PHY and RF when stop WiFi and disable BT
1. Add disable PHY and RF when WiFi and BT are both disabled(including call sniffer disable API).

2. Do not init PHY and RF when cpu start. Init PHY and RF when call Wifi or BT start APIs(including sniffer enable API).

3. Add a temporary lib: librtc_clk.a and will delete it when CPU frequency switching function is done.

4. Add an function to get OS tick rate.

5. Do not put the whole pp.a in iram0, only put lmac.o, ieee80211_misc.o, ets_time.o and wdev.o in iram0.
2017-02-17 10:24:54 +08:00
wangmengyang
2e7748d625 component/bt: modify bluetooth API
1. VHCI api and doxygen
2. Controller api and doxygen
3. bluedroid init/enable api and doxygen
4. cleanup demo codes
2017-01-05 20:02:06 +08:00
Ivan Grokhotkov
541b142654 phy_init: reduce the amount of hardwired logic, add coexist init 2016-11-18 20:11:17 +08:00
Ivan Grokhotkov
4db29f74a0 add PHY init support 2016-11-18 20:11:16 +08:00