Commit graph

70 commits

Author SHA1 Message Date
Ivan Grokhotkov
80c5547b97 Merge branch 'bugfix/ulp_fixes' into 'master'
ULP fixes

See merge request idf/esp-idf!2948
2018-08-08 15:37:25 +08:00
Angus Gratton
cdc792d72c Merge branch 'feature/http_firmware_upgrade' into 'master'
esp_https_ota: Add esp_https_ota component

See merge request idf/esp-idf!2771
2018-08-08 12:27:05 +08:00
Ivan Grokhotkov
479af576ca ulp: fix calculation or ulp_run argument
The argument to ulp_run should be expressed in 32-bit words. Both the
address of ulp_entry and RTC_SLOW_MEM already are uint32_t*, so their
difference is the difference in addresses divided by sizeof(uint32_t).
Therefore the extra division by sizeof(uint32_t) is not needed.
2018-08-07 16:14:57 +03:00
Sagar Bijwe
1df85e0039 nvs_flash: Version compatibility check for nvs storage
This change adds a check for compatibility between the nvs version
found on nvs flash and the one assumed by running code during nvs
initialization. Any mismatch is reported to the user using new error
code ESP_ERR_NVS_NEW_VERSION_FOUND.
2018-08-05 00:00:56 +00:00
Jitin George
1fecdc3891 esp_https_ota: Add support for HTTPS based ota feature 2018-08-03 16:47:07 +05:30
Konstantin Kondrashov
de2b1cb02a make: Add feature to cmd 'make flash' - reset ota_data partition
Add a command `make erase_ota` - erases otadata if it there is in the
partition table otherwise error 'Partition table does not have ota_data partition'.

Closes https://github.com/espressif/esp-idf/issues/1821
2018-07-25 11:22:15 +00:00
Ivan Grokhotkov
0e3694b542 Merge branch 'feature/freertos_vtasklist_xcoreid' into 'master'
freertos: Add option to display xCoreID in vTaskList

See merge request idf/esp-idf!2728
2018-07-20 18:46:41 +08:00
Ivan Grokhotkov
a8f39a892e Merge branch 'bugfix/ulp_example_fix' into 'master'
ulp example: fix for RTC IOs

See merge request idf/esp-idf!2768
2018-07-19 15:04:20 +08:00
Ivan Grokhotkov
cffaa9f5b5 freertos: add configTASKLIST_INCLUDE_COREID 2018-07-17 10:57:26 +00:00
Ivan Grokhotkov
4b97a1edb2 ulp example: fix for RTC IOs
- call rtc_gpio_init for pins which aren't configured as RTC by default
- for RTC IOs 16 and 17, read higher part of the input register
- automatically convert GPIO number into RTC IO number
- use ulp_set_wakeup_period instead of writing to register
2018-07-13 17:48:15 +08:00
Angus Gratton
a67d5d89e0 Replace all DOS line endings with Unix
Command run was:
git ls-tree -r HEAD --name-only | xargs dos2unix
2018-07-12 19:10:37 +08:00
Angus Gratton
c1fdd45001 Merge branch 'bugfix/fix_touch_pad_can_not_wake_up' into 'master'
bugfix(touch pad): modify deep-sleep example and add note for sleep api

See merge request idf/esp-idf!2553
2018-06-20 11:51:46 +08:00
fuzhibo
9a0d57b90b bugfix(touch pad): modify deep-sleep example and add note for sleep api.
Closes https://github.com/espressif/esp-idf/issues/2052
2018-06-20 10:57:26 +08:00
Angus Gratton
d0b8f2865f docs: Switch base URL from esp-idf.readthedocs.io to docs.espressif.com 2018-06-19 11:23:33 +00:00
Ivan Grokhotkov
2f5cd89833 examples: add esp_timer example 2018-06-07 11:59:36 +08:00
Alexey Gerenkov
585df5cfdb docs: Corrects OpenOCD command usage in logtrace readme 2018-05-25 16:42:18 +03:00
Angus Gratton
a79116a23e Merge branch 'feature/gcov_dbg_stubs' into 'master'
Feature/gcov dbg stubs

See merge request idf/esp-idf!1494
2018-05-21 08:07:49 +08:00
Alexey Gerenkov
c1b6a37bb1 esp32: Adds GCOV debug stubs support
Adds the following functionality
 - Debug stubs infrastructure
 - Stub for retrieveing GCOV data without user source code modification
2018-05-18 16:16:03 +03:00
Roland Dobai
18e83bcd53 Allow VFS file descriptors in select() 2018-05-18 08:06:33 +02:00
Chen Wu
460c4fa486 bugfix(ota): update ota to download valid bin file 2018-05-16 09:24:47 +00:00
Anuj Deshpande
6238459dd7 docs: Fix broken link in nvs and jtag example
- Closes https://github.com/espressif/esp-idf/issues/1922
2018-05-07 12:38:20 +05:30
Angus Gratton
fa3205737f partition_table: Check configured flash size fits in partition table
Check happens at build time, so flash size config may need to be changed.

Also fixes MD5_OPT undefined warning, closes https://github.com/espressif/esp-idf/issues/1867
2018-04-26 09:51:55 +10:00
Ivan Grokhotkov
6185e722c3 Revert "Merge branch 'feature/vfs_select' into 'master'"
This reverts merge request !2074
2018-04-20 11:51:41 +08:00
Roland Dobai
6852d653bd Allow VFS file descriptors in select() 2018-04-17 11:25:30 +02:00
Hrishikesh Dhayagude
59d19d12af Fix Kconfig.projbuild in some examples, where myssid is erroneously kept as the default value for password.
Signed-off-by: Hrishikesh Dhayagude <hrishi@espressif.com>
2018-04-05 14:34:43 +05:30
Roland Dobai
27a63c492f Examples: Demonstrate the usage of esp_err_to_name 2018-03-13 14:27:00 +01:00
Ivan Grokhotkov
c8ba6cf156 Merge branch 'feature/rtc_gpio_isolate' into 'master'
Add rtc_gpio_isolate function, use it in deep sleep examples

See merge request idf/esp-idf!1936
2018-02-26 06:09:08 +08:00
Michael (Xiao Xufeng)
10ab4c085b example(console): print column name for tasks. 2018-02-14 11:56:47 +08:00
Ivan Grokhotkov
af6cfc5552 docs, examples: use rtc_gpio_isolate to disconnect GPIO12
This is needed to reduce deep sleep current on ESP32-WROVER modules.

Ref TW18165.
2018-02-11 13:28:47 +08:00
Ivan Grokhotkov
206eadab5a console example: increase main task stack size
Stack size was not sufficient for logging at Verbose log level.
2018-02-11 13:14:44 +08:00
Ivan Grokhotkov
57a516389c console example: add 'tasks' command to print vTaskList output
This command prints list of tasks, their state, and stack
watermark values.
Fixes https://github.com/espressif/esp-idf/issues/1534
2018-02-11 13:06:01 +08:00
Ivan Grokhotkov
24b07a3f45 console example: initialize nvs on startup
Fixes https://github.com/espressif/esp-idf/issues/1478
2018-01-09 12:48:02 +08:00
Ivan Grokhotkov
ca751648fa ulp: document the need to wait for RTC to be ready for wakeup 2017-12-11 12:11:46 +08:00
Angus Gratton
dc994e9c88 ota example: Send a valid HTTP/1.0 request
Was sending an invalid HTTP/1.1 request which many web servers rejected.

Thanks @chegawara for pointing this out on IRC.

Ref:
https://github.com/espressif/esp-idf/issues/231#issuecomment-300287523
2017-11-21 09:02:58 +11:00
Ivan Grokhotkov
3726cd39ab Merge branch 'bugfix/examples_ulp_gpio15' into 'master'
examples/ulp: disable pullup on GPIO15 to reduce current

See merge request !1486
2017-11-13 17:34:12 +08:00
Ivan Grokhotkov
dec4a868d0 examples/ulp: disable pullup on GPIO15 to reduce current
Also increase sampling frequency in ulp_adc example and update READMEs.

Fixes https://github.com/espressif/esp-idf/issues/1108
2017-11-03 18:56:31 +08:00
Darian Leung
9d63e1da4a New Task Watchdog API (Revert of Revert)
This commit reverts the revert on the new task watchdog API. It also
fixes the following bug which caused the reversion.

- sdkconfig TASK_WDT_TIMEOUT_S has been reverted from the unit of ms back to the
unit of seconds. Fixes bug where projects using the new API without rebuilding sdkconfig
would cause the old default value of 5 to be interpreted in ms.

This commit also adds the following features to the task watchdog

- Updated idle hook registration to be compatible with dual core hooks

- Updated dual core hooks to support deregistration for cpu

- Legacy mode has been removed and esp_task_wdt_feed() is now replaced by
  esp_task_wdt_reset().  esp_task_wdt_feed() is deprecated

- Idle hooks to reset are now registered/deregistered when the idle tasks are
  added/deleted from the Task Watchdog instead of at Task Watchdog init/deinit

- Updated example
2017-11-02 16:47:51 +08:00
Ivan Grokhotkov
b6f37bda97 Merge branch 'feature/i2s_built_in_adc' into 'master'
feature(I2S-ADC): add ADC mode for I2S.

See merge request !1077
2017-10-20 15:52:56 +08:00
Ivan Grokhotkov
4d42b5ea24 console: handle empty input to esp_console_run correctly
Fixes https://github.com/espressif/esp-idf/issues/1067

Ref. TW15752
2017-10-13 07:14:53 +08:00
Jeroen Domburg
b6a2bd1184 Revert "esp32: New Task Watchdog API"
This reverts commit 616baa239d.
2017-09-30 18:07:19 +08:00
Darian Leung
616baa239d esp32: New Task Watchdog API
Legacy API of task watchdog used the same function esp_task_wdt_feed() to add
and feed a task. This caused issues of implicitly adding a task to the wdt list
if the function was used in shared code.

The new API introduces init, adding, feeding, deleting, deinit functions. Tasks
must now be explicitly added to the task watchdog using their handles. Deletion
must also be explicit using task handles. This resolves the issue of implicit
task additions to the task watchdog due to shared code calling
esp_task_wdt_feed().

Task watchdog is now fully configurable at runtime by calling the init and
deinit functions.

Also added functions to get the handles of idle tasks of the other core. This
helps when adding idle tasks to the watchdog at run time.

Configuring the task watchdog using menu config is still available, however
menu config will only result in calling the init and add functions for idle
tasks shortly after the scheduler starts.

Menu config also allows for using legacy behavior, however the legacy behavior
willcall the new API functions but with slight variations to make them legacy
compatible.

Documentation and example have also been updated

gcov_rtio.c headers updated to prevent error of freertos header files being
included in the wrong order.

Resolves issue TW#13265
2017-09-29 23:10:55 +08:00
Wangjialin
2fceec4d85 feature(I2S-ADC): add ADC mode for I2S.
1. Support built-in ADC for I2S.
2. Modify code of ADC, made no change to the original APIs.
3. Add APIs in I2S:
esp_err_t i2s_set_adc_mode(adc_unit_t adc_unit, adc1_channel_t adc_channel);
4. Add I2S ADC/DAC example code.
5. add old-fashion definition to make it more compatible
6. replase spi_flash_ APIs with esp_partition_ APIs
7. add example of generating audio table from wav
8. change example sound
2017-09-14 13:24:08 +08:00
Alexey Gerenkov
891f0db31d esp32: Adds gcov over JTAG feature
Implements function to dump GCOV data to host via JTAG.
The following functionality was added:
 - Host file I/O
 - GCOV runtime I/O stubs
 - GCOV example
2017-09-07 18:13:16 +03:00
krzychb
672390c458 Mass replacement of http with https urls, fixed broken urls 2017-09-06 08:16:01 +02:00
Ivan Grokhotkov
d2acf1ce77 sleep: add light sleep, factor out APIs common for deep/light sleep 2017-09-01 10:36:14 +08:00
Darian Leung
88b05f9391 esp_adc_cal: Added ADC calibration component
Added component containg API that is able to correct raw ADC readings
into a voltage in mV. Also provided a helper function that combines
the process of getting the raw ADC1 reading then converting it to a
voltage in mV. In doing so, the adc1_get_voltage() function of the ADC
driver has been deprecated. Instead there is now adc1_get_raw to obtain
the raw ADC1 reading, and adc1_to_voltage() that gets the raw reading
and converts all in one function. Functions using the deprecated
adc1_get_voltage() have also been updated to use adc1_get_raw().

Conversion is based on ADC characteristics. The characteristics are based
on the ADC's v_ref, herefore the appropriate structure and functions have
been provided to obtain the ADC characteristics.

The existing ADC driver has also been modified by adding a function to
route the internal ADC reference voltage to a GPIO allowing users to measure
it manually.

Relevant documentation has also been updated
2017-08-29 18:43:14 +08:00
Ivan Grokhotkov
e1846df542 Merge branch 'feature/app_trace_to_host_example' into 'master'
Example on using application trace and logging to host

See merge request !1082
2017-08-24 14:30:28 +08:00
Ivan Grokhotkov
10f0543080 console: add support for terminal probing and dumb terminal mode 2017-08-21 15:58:28 +08:00
Ivan Grokhotkov
5de7c91a54 add console component and example 2017-08-21 15:58:27 +08:00
krzychb
78a0523757 Example on use application trace logging to host 2017-08-19 15:44:06 +02:00