Commit graph

10 commits

Author SHA1 Message Date
Renz Christian Bagaporo
946f55db85 cmake: add ulp components build support 2018-09-13 14:54:59 +08:00
Konstantin Kondrashov
dbad72e6b5 examples/ulp: Add using esp_deep_sleep_disable_rom_logging 2018-09-04 18:21:34 +08:00
Ivan Grokhotkov
479af576ca ulp: fix calculation or ulp_run argument
The argument to ulp_run should be expressed in 32-bit words. Both the
address of ulp_entry and RTC_SLOW_MEM already are uint32_t*, so their
difference is the difference in addresses divided by sizeof(uint32_t).
Therefore the extra division by sizeof(uint32_t) is not needed.
2018-08-07 16:14:57 +03:00
Ivan Grokhotkov
4b97a1edb2 ulp example: fix for RTC IOs
- call rtc_gpio_init for pins which aren't configured as RTC by default
- for RTC IOs 16 and 17, read higher part of the input register
- automatically convert GPIO number into RTC IO number
- use ulp_set_wakeup_period instead of writing to register
2018-07-13 17:48:15 +08:00
Ivan Grokhotkov
af6cfc5552 docs, examples: use rtc_gpio_isolate to disconnect GPIO12
This is needed to reduce deep sleep current on ESP32-WROVER modules.

Ref TW18165.
2018-02-11 13:28:47 +08:00
Ivan Grokhotkov
ca751648fa ulp: document the need to wait for RTC to be ready for wakeup 2017-12-11 12:11:46 +08:00
Ivan Grokhotkov
dec4a868d0 examples/ulp: disable pullup on GPIO15 to reduce current
Also increase sampling frequency in ulp_adc example and update READMEs.

Fixes https://github.com/espressif/esp-idf/issues/1108
2017-11-03 18:56:31 +08:00
Ivan Grokhotkov
d2acf1ce77 sleep: add light sleep, factor out APIs common for deep/light sleep 2017-09-01 10:36:14 +08:00
Ivan Grokhotkov
3c583a7655 sdkconfig: set CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000 by default
To increase the chances that the examples work out of the box, this
change is raising the default deep sleep wakeup delay to 1ms.
If GPIO15 is low at startup, ROM code takes less time to execute
(because no logging is performed), so more time may be needed to allow
flash chip to become ready.
2017-05-25 10:51:39 +08:00
Dmitry Yakovlev
a6e4e89592 ulp: add build system integration and example 2017-03-27 12:41:00 +08:00